Leading Zeros for Decimal values

Hi,
In my requirement i need to add leading zeros for Decimal values.
For Example.
If the value is = 0.00 then my Target value should be = 000000000000.00
Regards,
Anil.

Hi Anil,
You have to use conversion exit ,
Kindly go through this link below:
Re: Conversion exit: numbers in database, two decimals on screen
Hope it helps
Regards
Mansi

Similar Messages

How to get the leading zeros for decimal values?

Hi,
How i wil get the leading zeros for decimal values.For CONVERSION_EXIT_ALPHA_INPUT it is not working.Now iam using overlay condition for getting leading zeros.But iam getting the value like 00013.500.But as per my requirement i want to display this value 0000013.5.
my code is
                overlay w_MetLife_detail-rdempsalary with '000000000'
                data :rdempsalary     type char9
Please help me on this.
Regards,
Sujan

Hi
For more info,
The function of the statement UNPACK is based on the fact, that the BCD display of a decimal place corresponds to the second half-byte of code of a digit in the most character representations. This conversion is commonly called "unpacking".
The statement PACK to pack is obsolete and can be replaced by MOVE.
If destination is specified as untyped field symbol or as untyped formal parameter and is not flat and not character-type during execution of the statement, then an untreatable exception occurs in Unicode programs. In non-Unicode programs, an exception occurs only with deep types, whereas flat types are treated as character-type types.
Example
After the assignments,char1 and char2 contain the values "123.456" and "0000123456".
DATA: pack TYPE p LENGTH 8 DECIMALS 3 VALUE '123.456',
      char1 TYPE c LENGTH 10,
      char2 TYPE c LENGTH 10.
MOVE   pack TO char1.
UNPACK pack TO char2.
Regards

Leading Zeros for variable vlaues(Date)

Hi,
How to remove leading zeros for variable values.
For example;
Comapny Code by Auth: 007.2004(July 2004)
How to take out the first two zeros or first zero.
Any suggestions would be of great help.
Regards,
Suresh

How is that related to sql develper?
Did you read the forum title? - SQL Developer (Not for general SQLl/PLSQL questions)

How can i avoid leading zeros for a field in smartform?

how can i avoid leading zeros for a field in smartform?

Hi,
Using the Symbols.
&symbol(Z)& Omit Leading Zeros &symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
Regards,
Shiva Kumar

LEADING ZEROS AFTER DECIMAL

Hi
I want to remove leading zeros after decimal what should i do for that?.
suppose lets thing my field is VAR and it gives value 150.000 and now i want to remove the zeros after decimal

QMEL-QMNUM is a character 12 field, which internal format has leading zeros, simplest way to remove the leading zeros is to shift left.
loop iords.
shift iords-qmnum left deleting leading '0'.
modify iords.
endloop.
can either use this function module also
CONVERSION_EXIT_ALPHA_OUTPUT
or
SHIFT <yourField> LEFT DELETING LEADING '0'
or
try NO-ZERO option of WRITE statement
or
Another way is to create another variable of type I and assign the value into it
example:
DATA: L_NUMC(08) TYPE N.
DATA: L_INT TYPE I.
L_NUMC = '00000018'.
L_INT = L_NUMC.
Result will be = 18.

Truncating Leading Zeros & Displaying Decimal Positions in a Webdynpro

Hi All,
I am new to webdynpro and assigned with some issues in webdynpro application, the issues goes like this. i already have a webdynpro application where in i am trying to display a PO as in transaction ME23 with Header and Line Items, In Line Items, i want to Truncate Leading Zeros for material Number & Item Numbers. In the net price i want to display decimal values even if our price dont have any decimal value. For Example if the net price is 33.33 then i am able to see the value as 33.33. If its 33.00 then i am able to see values only as 33. I want to see the exact value as 33.00. Let us know how to over come those issues.
Thanks in advance,
With Best Regards,
Prabahar N.R

Hi Santhosh,
I failed while executing the steps you mentioned, kindly look into below description for more understanding.
We have an issue like the decimal positions are truncated when the value of decimal places are Zero. For Example if the net price is 99.98 then i am able to see the value as 99.98. If its 99.00 then i am able to see values only as 99. I want to see the exact value as 99.00. The values are populated from an RFC Table, which is coming from a Standard BAPI. I find in the implementation, the attributes uses a method called bindText() available in com.sap.tc.webndypro.clientserver.uielip.standard.api.IWDtextview. Below is the piece of code,
com.sap.tc.webdynpro.clientserver.uielib.standard.api.IWDTextView NetPrice_editor
= (com.sap.tc.webdynpro.clientserver.uielib.standard.api.IWDTextView)
wdAlterEgo.createElement(com.sap.tc.webdynpro.clientserver.uielib.standard.api.IWDTextView.class, "Net_Price_editor");
NetPrice_editor.setHAlign(com.sap.tc.webdynpro.clientserver.uielib.standard.api.WDInputFieldAlignment.valueOf("left"));
NetPrice_editor.setWrapping(true);
NetPrice_editor.bindText("bapi_po_getdetail_input.Output.Po_Items.Net_Price");
NetPrice.setTableCellEditor(_Net_Price_editor);
Table.addColumn(Net_Price);
I can see from R/3 back end the values coming with decimal values even if the decimal positions are null. Any suggestions will be very helpful.
With Best Regards,
Prabahar N.R

Remove Leading zeros for Material in Transformation

Hi Experts,
I'm using DTP first time. I don't have much exp on DTP & Transformations.
I'm creating infocube with some objects. I want to remove leading zeros for zmaterial.
In 3.x writen update routines as fallows:
data: zmat(18) type c.
zmat = COMM_STRUCTURE-/BIC/ZMAT.
shift zmat left deleting leading '0'.
result value of the routine
RESULT = zmat.
I'm confusing in Transfermation where to write this routines.
I'm writing in Transformation as fallows:
data: zmat(18) type c.
zmat = SOURCE_FIELDS-/BIC/ZMAT.
shift zmat left deleting leading '0'.
RESULT = zmat.
But it's getting remove zero's.
Anybody suggest on this.
Siri

Dear Sir,
No confusion at all.
Just double click on the Target Infoobjct i,e Material object in Transformation, you will see a wizard popping up.
There you will see a option called "RULE TYPE" and the default value will be "Direct Assignment". In the same check box click on the drop down icon and select "Routine".
The moment you select the routine option, it will open up ABAP workspace where in you can write your routine and get the desired result.
Hope it helps.

Removing Leading Zeroes in Location value

HI Gurus,
I am having some trouble in releasing demand plan to SNP. On the demand planning side, we are using standard characteristic 9ALOCATION for storing location values. When I release demand plan (using Location characteristic - 9ALOCATION) to SNP, I get a message saying 'Location 00000000000000003000 does not exist'. But, I have location '3000' assigned to the active model in APO system.
I believe this issue is arising because, the system is storing leading zeroes in Location value '3000' on Demand Planning side. I know that there is customization setting (SPRO-> APO -> Master data -> Product -> specify output format) to prevent leading zeroes from being added to product number. But I don't see a similar setting for Location and moreover I am using 9ALOCATION and not 9ALOCNO.
So, how can I remove leading zeroes in the values of 9ALOCATION.
Any help/comments are appreciated.
Thanks,
Shiv.

I found a solution to this problem. Unlike 9ALOCNO, Characteristic '9ALOCATION' has Alpha conversion routine. So this conversion routine fills up the leading zeros. I removed Alpha conversion routine from the 9ALOCATION in RSA1 and it works fine now.

Suppress leading zeros for ALV column

Hello,
I have an ALV with a column mapped to a context attribute of type NUMC and would like to suppress the leading zeros being displayed. My initial solution was to change the attribute to a char/string type and remove the zeros in my code, but then, the sort functionality no longer works correctly. Any ideas if the ALV can use a 'hidden' field to do the sorting for a certain column... that way, I can display the number as a char/string without the zeros and when the user sorts the column, the ALV will use the hidden NUMC type field.
Thanx for any directions...

Hi,
You can follow the following way which i implemnted for one of my application. Here i am setting this property for the context attrubute. May be this will work. But in ALV there is no separate method for this type of setting.
**This method is used to display the Leading zeros for the Lot Number in Step-1
DATA:
    node_do_not_change                  TYPE REF TO if_wd_context_node,
    node_d0130_sapmf05a                 TYPE REF TO if_wd_context_node,
    node_pstap                          TYPE REF TO if_wd_context_node,
    node_info                           TYPE REF TO if_wd_context_node_info,
    ls_fprops                           TYPE wdy_attribute_format_prop.
node_do_not_change = wd_context->get_child_node( name = wd_this->wdctx_do_not_change ).
node_d0130_sapmf05a = node_do_not_change->get_child_node( name = wd_this->wdctx_d0130_sapmf05a ).
node_pstap = node_d0130_sapmf05a->get_child_node( name = wd_this->wdctx_pstap ).
node_info = node_pstap->get_node_info( ).
ls_fprops = node_info->get_attribute_format_props( 'VALUE' ).
ls_fprops-null_as_blank = if_wd_context_node_info=>c_format_null_as_BLANK.
node_info->set_attribute_format_props(
    name              = 'VALUE'
    format_properties = ls_fprops ).
Warm Regards,
Vijay

Urgent........How to add leading zeros to negative values.....

Hi,
I want to add leading zeros to negative values.
Present Value : -567
Expected Value : -0000000567
I know to adding leading zeros with the help of CONVERSION_EXIT FM.
Thanks in advance.
Regards,
Kumar.

Hi
Use below FM.
CONVERSION_EXIT_ALPHA_INPUT
Try out below FM with the above one.
CLOI_PUT_SIGN_IN_FRONT
ISJP_GET_SIGN
or you can use
WRITE variable USING EDIT MASK '-___________'.
or
CONCATENATE syntax
Hope it will solve your problem
Reward Points if it is helpful.
Message was edited by:
 ilesh 24x7
Message was edited by:
 ilesh 24x7

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

Removal of leading zeros for material no. in report

hi
my issue is that i have to remove leading zeros for material number when displaying in alv grid.iam getting output.but leading have to truncated automatically.
eg: 000000000000000102
the ouput should be 102.
please do provide solution for this or any function module.thanks in advance.

Hi Sanjana,
while populating the internal table use the conversion exit available for MATNR. this will remove the leading zeros.
oter possible way, declare the internaltable by referring the data element MATNR, i hope if you do this, it will delete the leading zeros automaticallt.
or if you declare the internal table field as charecter type, use the ALPLA_CONVERSION_EXIT_INPUT ot OUTPUT function module to remove the leading zeros.
Reward the points if it is helpful..

Delete leading zeros for material in mapping.

Hi,
How to delete leading zeros for material like 0000000128736 if so I am expecting 128736 only.
We need to consider if I get material number is like RPG2389 .
Thanks,
Vinay.

Hi,
If you will be getting alphanumeric codes, it would be best to use a UDF with a regex-expression.
UDF Type:
ContextType
imports:
java.util.regex; (if you are using PI 7.1 you must remove the semicolon)
arguments:
input1
Here's the code (courtesy of Sun Developer Network):
        Pattern p = Pattern.compile("[^a-zA-Z]");
        Matcher m = p.matcher(input1[0]);
        StringBuffer sb = new StringBuffer();
        boolean output = m.find();
        while(output) {
            m.appendReplacement(sb, "");
            output = m.find();
        m.appendTail(sb);
result.addValue(input1[1]);
Now to solve the leading zeroes, just add formatNumber: 0 after the UDF and it will work.
Hope this helps,

Leading zero for the instance

hi,
my numbers looks like 0 or -0,23 or ,45...
but i want to have a leading zero, e.g. 0,0 or 0,45
i know that i can use to_char(xxx,'format') in queries,
but i want to have the leading zero for the whole instance.
is that possible?
thx.

In cas you use SQL*Plus for your queries modify your login file
SET NUMFORMAT ...http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch3.htm#1005686

Losing the leading zero in binary values

Hi all,
I�m currently creating some basic examples of bitwise operations and I�ve just noticed that I�m losing the leadnig zero of a binary value ( e.g.
decimal 1 (expecting to see bin of 0001) is manifesting as 1
decimal 16 (expecting to see bin of 00010000) is manifesting as 10000
below is a full example
import static java.lang.Integer.*;
public class BitExample {
public static void main(String[] args) {
System.out.println(
     toBinaryString(0x1) + '\n' +
     toBinaryString(0x16) + '\n' +
     toBinaryString(0x6a) + '\n' +
     toBinaryString(0x80)
I can see I�m missing something, but not sure what. Can you help?
Many Thanks
Giles

which obviously returns a very different resultNo it does not ... let's translate the example to decimal (with additions instead of bitwise operations, but that doesn't change anything:
1234 +
0001
1235and
1234 +
1
1235both notations are correct, aren't they? Now the second one doesn't look so nice (and usually the 1 should be right-aligned to be easily readable, but it isn't wrong, because of this.
The same is true for binary operations. The problem is, that while learning bitwise operations it's easier to unserstand if you always write the leading zero (as you do in your example).

Leading Zeros for Decimal values

Similar Messages

Maybe you are looking for