Learning Map html error

Hi, im having this problem with Learning maps, and cant figure out what is the problem, I keep having the same error message:
"Logon Error Message"
"http://sci.itsgroup.com.br:8000/sap/bc/solman/defaultUser/LearningMap/start.htm wurde abgebrochen, da der entsprechende Service nicht verfügbar ist."
" * Der Abbruch trat auf dem System SCI und mit dem Fehlercode 404 und dem Grund No Extension Found auf.
Der ausgewählte virtuelle Host war 0 . "
But I belive ive already done everything for correct functioning of learning maps.
All the following services are active:
/sap/bc/bsp/sap/learning_map
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
Ive also creates the External Alias:
/default_host/sap/bc/bsp/sap/learning_map
/default_host/sap/bc/solman
The services also have the correct HTML user set in logon data. Im using the user "SOLARSERVICE" with the role SAP_SOL_LEARNING_MAP_DIS.
And also my FQDN is correct, becose all my other html aplication as: workcenters, issue mgmt, test sequence are working fine.
There is anything ive done wrong or missed?

Hi Magus,
This may be worth a try - at work here we have a proxy server defined in our browser settings so can you check your settings and disable any proxy server for IE or Firefox etc?
This should bypass your error and connect to your SolMan as it seems you have correctly completed all other tasks.
Thanks,
-Rohan

Similar Messages

Solution Manager Learning Map http error 403

Hi,
I created a new learning map in solution manager using solar_learning_map, when I attempted to display the learning map in the web browser i received the following error.
<i><URL> call was terminated because the corresponding service is not available.
The termination occurred in system ISD with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .</i>
If anyone else has experienced this error before can you please give me some guidance on resolving this issue.

The Note exists in service marketplace. (Topic is Inactive services in the Internet Comm Framework).Here is the solution as per the Note.
Solution
Listed below are some services that must be activated in the system
depending on the operational scenario:
Support for the Internet protocol (HTTP, HTTPS and SMTP) in the SAP Web Application Server
/default_host/sap/public/icman
Note: After you have installed SAP Web Application Server, you must ensure that this service is activated in transaction SICF. Through this the ICMan process can (for example) make decisions concerning the distribution of HTTP requests to the corresponding server.
Using load distribution
with the message server
/default_host/sap/public/icf_info
/default_host/sap/public/icf_info/logon_groups
/default_host/sap/public/icf_info/urlprefix
with the Web Dispatcher
/default_host/sap/public/icf_info
/default_host/sap/public/icf_info/icr_groups
/default_host/sap/public/icf_info/icr_urlprefix
Using Business Server Pages (BSP)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc (available for 620 with Support Package 34)
/default_host/sap/public/bc/ur (available for 620 with Support Package34)
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)
Note: In addition to these general BSP services, you still have to activate the corresponding application services in the ICF tree. The service for the application is generally found under the ICF node /default_host/sap/bc/bsp/sap/<application>.
Using the BSP logon procedure
/default_host/sap/public/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/system
BSP test applications for troubleshooting
/default_host/sap/bc/bsp/sap/it00
/default_host/sap/bc/bsp/sap/sbspext_htmlb
/default_host/sap/bc/bsp/sap/sbspext_xhtmlb
/default_host/sap/bc/bsp/sap/htmlb_samples
As of Release 6.30:
/default_host/sap/bc/bsp/sap/bsp_verificatio
Using Business Information Warehouse (BW)
/default_host/sap/bw
Web Applications
/default_host/sap/bw/BEx
/default_host/sap/bw/Mime
Reporting agent preliminary calculation
/default_host/sap/bw/ps
Drag and Relate in the portal
/default_host/sap/bw/dr
Data access using XMLA
/default_host/sap/bw/xml and all subordinate subservices
Document integration in the BEx Analyzer and Web Applications.
/default_host/sap/bw/doc and all subordinate subservices
Formatted reporting
/default_host/sap/bw/ce_url
Assignment of SAP icons
/default_host/sap/public/bc
/default_host/sap/public/bc/icons
/default_host/sap/public/bc/icons_rtl
/default_host/sap/public/bc/webicons
/default_host/sap/public/bc/pictograms
Assignment of Web Dynpro ABAP (WDA) applications
/default_host/sap/bc/webdynpro
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bc/icons
/default_host/sap/public/bc/icons_rtl
/default_host/sap/public/bc/webicons
/default_host/sap/public/bc/pictograms
/default_host/sap/public/bc/webdynpro/* (ssr, mimes, and so on)
/default_host/sap/public/myssocntl
Note: In addition to these general WDA services, the corresponding application services in the ICF tree also need to be activated. The service for the application is generally found under the ICF node /default_host/sap/bc/webdynpro/sap/<application>.
Assignment of Web Dynpro ABAP (WDA) development environment
/default_host/sap/bc/webdynpro/sap/public/bc/viewdesigner/
/default_host/sap/bc/wdvd/
/default_host/sap/bc/webdynpro/sap/configure_application
/default_host/sap/bc/webdynpro/sap/configure_component
/default_host/sap/bc/webdynpro/sap/wd_analyze_config_appl
/default_host/sap/bc/webdynpro/sap/wd_analyze_config_comp
/default_host/sap/bc/webdynpro/sap/wd_analyze_config_user
Note: These ICF nodes are used for the WDA configuration editor ONLY. The nodes are only allowed to be active in a development system, and under no circumstances in a production system (due to a security risk).
WDA test applications for troubleshooting
/default_host/sap/bc/webdynpro/sap/wdr_test_events
/default_host/sap/bc/webdynpro/sap/wdr_test_ui_elements
/default_host/sap/bc/webdynpro/sap/wdr_test_table
/default_host/sap/bc/webdynpro/sap/wdr_test_popups_rt
ICF test applications:
/default_host/sap/bc/echo
Among other things, this service returns information about the registration procedure being used, the header and form fields, and the generated SSO cookie for the executed request. Therefore, this service should only be activated for troubleshooting purposes.
/default_host/sap/bc/error
This service generates some error situations in the system and should only be activated for troubleshooting purposes.
/default_host/sap/bc/srt/xip/sap
You want to fix the Web service error message "Could not determine WSDL address (ICF_ERROR), SRT_REG038" in connection with XI services.
Using Support Package SAPKB62006, the following problems were solved in connection with inactive services:
The "RAISE_EXCEPTION" ABAP runtime error no longer occurs for an inactive host.
The error text "Forbidden" was replaced with "Service is not active" for an inactive service.
Thanks
Sudhan Shan

Learning Map (HTML) Feedback Authorization

Hi,
We are using SAP EHP 1 for SAP Solution Manager 7.0.
I have created learning map using transaction SOLAR_LEARNING_MAP and I am able to view the content in webpage.
But when I click on feedback button in the web browser system gives a pop up message u201CYou are not authorized to make changes".
Help me with details of what authorization / config are required to give the feedback.
Regards,
Praveen

The issue is solved by following the below.
check the user mainatined in the exteranl alias /sap/bc/solman/defaultuser in SICF.
Actually this user is used to open the learningmap and this user needs to have the role SAP_SOL_LEARNING_MAP_DIS assigned.
Addtionally in the role for the authorization object D_MD_DATA
the value '10' ('Change Model Instance') for DMD_ACTION has to be
available, as this is needed to send feedback in the browser.
Addtionally please implement the note:
1527024 Message 'Object is locked by ..' in Learning map
into your system.
After you have implemented the note please follow these steps:
-> Open the learning map in edit mode with transaction
SOLAR_LEARNING_MAP
-> click 'SAVE' button
-> go back to intial screen of SOLAR_LEARNING_MAP
=> open the learningmap in the browser and test again to send feedback
Regards,
Praveen

Jboss/tomcat mapping configuration error

I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>

<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.

Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps.

MAPPING MAPPING configuration error

I am getting MAPPING configuration error while running this code using Tomcat 4.1 on my website whereas it is running at my local webserver
Please HELP
ERROR LOG
StandardHost[site.winwinhosting.net]:MAPPING configuration error for request URI /
NewsFile read: java.lang.NullPointerException:name can:+t be null NewsFile read: java.lang.NullPointerException: name can:+t be null NewsFile read:
java.lang.NullPointerException: name can:+t be null
Bunty
<%@ page import = "java.io.*, java.util.*,java.net.URL,java.awt.*" %>
<HTML>
<head></head>
<body>
<%
// Read in the text file newsfile.txt
ServletContext context = getServletContext();
String file = (context.getRealPath("news.txt"));
//String file = "news.txt";
StringBuffer stringbuffer = new StringBuffer("");
   FontMetrics fm;
    Font f1;
    String str;
    String s;
    String tmp;
    String param;
    int i;
    int disp;
    int tot;
    int pos;
    int pos1;
    int ImageDepth;
    int TextDepth;
    int fmW;
    int dd;
    int width;
    int height;
    int j;
    char ch;
str = new String(" * Online : News * Ticker * ");
tmp = new String("");
param = new String("");
String s3,s2,s1, news = new String();
try {
DataInputStream in = new DataInputStream(new BufferedInputStream(new FileInputStream(file)));
//DataInputStream in = new DataInputStream((new URL( file)).openStream());
//stringbuffer.append(in.readLine());
//stringbuffer.append("   *   ");
//s1 = stringbuffer.toString();
//out.println(s1);
while((in.readLine())!= null)
s2=in.readLine()+ "\r";
stringbuffer.append(s2);
stringbuffer.append("   *   ");
//news += s2 + "\n";
//out.println(s2);
     in.close();
catch(Exception e) {
     System.out.println("NewsFile read: " + e);
%>
<%
news=stringbuffer.toString();
//out.println(news);
%>
<marquee><%=news%></marquee>
</body>
</html>

I think it is not able to locate your source file(New.txt). Try putting an output statement and see what is the patth it is printing and check whether it is the correct path where is your news.txt is located.
Bye

Learning Map in SolMan

Hi ALL,
We created a learning map in SolMan and I am not able to send it to users. When I click on button "Send to Users" in T-SOLAR_LEARNING_MAP, I get a message 'The page cannot be displayed'.
I checked for SAP Note 960811 - "Error when sending learning map to a long list of users". But, I wanted to send the learning map to only 2 users.
Can any one suggest what the problem could be?
Appreciate your response.
Thanks,
Vom

Be sure you have the latest support pack installed for sol man. It helped for us.

html:errors question

I have a JSP file,and I use <html:errors> in this page,but it raise error,my code is follows:
<%@ taglib uri="/WEB-INF/struts-form.tld" prefix="html" %>
<html>
<head>
<link rel="stylesheet" href="style.css" type="text/css">
</head>
<html:errors/>
<html:form method="post" action="log.do">
<html:text property="abc" /><html:errors property="abc"/>
</html:form> and my Form is follows:
public ActionErrors validate(ActionMapping mapping,HttpServletRequest request) {
ActionErrors errors = new ActionErrors();
if(abc!=null && abc.length()>0){
errors.add("abc",new ActionError(" error.abc.required"));
return errors;
} When I run it,it raise following error:
org.apache.jasper.JasperException: /index.jsp(8,15) Attribute property invalid for tag errors according to TLD
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
org.apache.jasper.servlet.JspServletWrapper.service (JspServletWrapper.java:375)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java :802)
org.apache.struts.action.ActionServlet.processValidate(ActionServlet.java:2149)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1565)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java :510)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
I have looked up <html:errors> API,I find it have property attribute:
property Name of the property for which error messages should be displayed. If not specified, all error messages (regardless of property) are displayed. (RT EXPR)
Why raise above error when I use <html:errors property="abc"/> ? How to do with it?
Thanks in advance!

Maybe this piece of code might help you
<tr>
<td align="center"><logic:messagesPresent>
<html:messages id="error">
<span id="error"><li><%=error%></li></span>
</html:messages>
</logic:messagesPresent>
<span id="error"><c:out value="${errorsNolog}"/></span>
</td>
</tr>

Acrobat Pro form getting MAPI spooler error

I have a form created in Acrobat Pro. The users are using Reader 9.3.1. When the user clicks the Submit button, they get a MAPI Spooler error. For some Windows Services closes Reader. Any thoughts on what is causing this and how to fix?
Thanks,
MDawn

Hi Lon ,
I would request you to get in touch with the support team to get your issue fixed.
http://helpx.adobe.com/x-productkb/global/service-b.html
Regards
Sukrit Dhingra

Struts 1.1 html:error

My resource file name is: application_en_US.properties
This file is placed under /WEB-INF/classes/resources/application_en_US.properties
In JSP file, I have a form, where I want to check, wether the userName field is null or not. If it is NULL, i want to display a message. But I m getting the following message, when the field is empty.
???en_US.error.login.username.null???
JSP form looks like this:
<form action="login">
<td>Username</td>
<td><html:text property="userName" size="16" maxlength="16"/></td>
<td><html:errors property="userName"/></td>
</form>
In struts-config, login.do action looks like this:
<form-beans>
<form-bean name="actionBean" type="xxx.xxx.ActionForm" /> </form-beans>
<action path="/login"
           type="xxx.xxx.LoginAction"
           name="actionBean"
           validate="true"
           input="/index.jsp">
<forward name="success" path="/welcome.jsp"/>
</action>
<message-resources parameter="resources.application_en_US" null="false"/>.....
In xxx.xxx.ActionForm.java the code looks like:
public class ActionForm extends ValidatorForm{
setters and getters are defined here
   public ActionErrors validate(ActionMapping mapping,
                                 HttpServletRequest request) {
        ActionErrors errors = new ActionErrors();
        if (userName == null || userName.trim().equals("")) {
            errors.add("userName", new ActionError ("error.login.username.null"));
        return errors;
In application_en_US.properties file:
error.login.username.null=User name required
I hope this details are enough. Please give me a solution. it's urgent.
Thank you.

You extended the wrong form class. You could not extend the ValidatorForm if you have tried to implement the validator method yourself. If you want to extend the ValidatorForm then you need to remove the Validator() method from the form bean class since the ValidatorForm is designed for validation based on validation.xml and validation-rules.xml. So you need to specify the url validation.xml and validation-rules in the struts-config.xml and the correponding plugin as well. Also you need to specify the validation rules in validation.xml and define the corresponding message in the resource file.
If you do want to implement the validator method yourself, instead of extending the ValidtorForm, you need to extend the ActionForm class, everything will be fine.
By the way you can not name your form bean class by ActionForm, you can only extends ActionForm.

Help with displaying errors in jsp using html:errors/

Here is my problem.
In my overridden ActionForm.validate() method, i am returning ActionErrors (as required). When there are input errors in my form submission, the control goes back to the JSP page i used to read user input (so far so good). The JSP page is rendered fine for taking input for the second time but no errors are displayed although i am using the tag <html:errors/>
I tried to find the org.apache.struts.action.ERROR in my request attributes and it is there with the size of 1 (because i am reporting one error, in my sample run). Any idea why <html:errors/> won't display the errors even though they are there??? Here is what i am doing in my ActionForm class:
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) {
ActionErrors errors = new ActionErrors();
if (this.email == null || this.email.length() < 1) {
errors.add("username", new ActionError
("error.username.required"));
return errors;
Any help is appreciated.

First of all, thanks for taking time to look at my message. Here is how my message-resources tag look like in struts-config.xml file:
<message-resources parameter="ApplicationResources"/>
The "ApplicationResources.properties" file exist in the WEB-INF folder of my application and following are the entries in that file that i think are relevant:
errors.header=<h3><font color="red">Validation Error</font></h3>You must correct the following error(s) before proceeding:<ul>
errors.footer=</ul><hr>
error.username.required=<li>Username is required</li>
Is there anything else needed to go into resource file? Or should i put my resource file somewhere else?

Map oracle error

Is there a way to map Oracle error to display a friendly error message to users?
For example, instead of displaying:
ORA-00001: unique constraint (GDB.INT_UK) violated
Have it map to some thing like:
Customer Id must be unique. The customer you try to add is already in the database.

The HTML DB Edit Process page has 3 boxes
1. Source - Put your source code here
2. Success message
3. Error message
Any unhandled exception in your PL/SQL code will cause HTML DB to go to an error page and show that error message (sqlerrm)
If you dont want that, handle all exceptions in your code either using named exceptions or predefined exceptions, map it to whatever user-friendly error message you want and put that in the Error message box.
So, for example, if my process source is
declare
file_not_found exception;
pragma exception_init(file_not_found,-20000);
invalid_format exception;
pragma exception_init(invalid_format,-20001);
begin
:P7_ERROR_MESSAGE := 'Successfully executed';
mypkg.myproc(...);
exception
when file_not_found or invalid_format then
:P7_ERROR_MESSAGE := sqlerrm;
end;And then, in process error mesage, I have #SQLERRM# (not really expected since I am handling all known errors in the code itself), the success message has &P7_ERROR_MESSAGE.
This way, I get a error page only when a totally unexpected error is raised.
Hope this helps
Thanks

Endash and curly quote HTML errors

I inherited a large knowledge base at my job that was using
RoboHelp x5. It hadn't been worked on for more than a year when I
started, so the first thing I did was upgrade to RoboHelp 7. (I am
a total Robohelp beginner; been learning on my own since starting
her in Jan. 08) The first time I generated an output and published
the knowledge base in 7, we began to discover the project is
riddled with <&endash;> and <&rdquor;> HTML
errors. RH x5 version read the endash and curly quotes fine and
displayed the characters.
What can I do now? Is there a global find and replace? What's
also weird is that the endash looks OK in the RoboHelp viewer. The
curly quote does show up wrong in the RH viewer as
<”r;>.
Any help or insight would be much appreciated. Thanks!

Thanks for your response, Peter. Don't see the patch you
mention -- could you point me to it? I may not be able to use it
tho, b/c have made lots of edits and updates to our knowledge base
so I can't go back to the old R5 copy at this point.
If not, I will try the Helpware FAR. In looking at their
site, am not sure how it works: do I apply it to the output file or
the RH project files.
Thanks!

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

Problem in Learning Map Sending

Hi
       I am Creating a Learning map in solution Manager4.0 , i can able to open it in browser, the Documents details are displayed but i click the document it was not download only empty browser was open ..
Any one help me to solve this...
          and also I have another problem in send to users the Learning map Deployment window was open but there is no user group listed
       Any Solution Please......
And also i need Complete Configuration Steps to Create LearningMap...
               Help....Please....

hi,
can you do the following steps
   Choose Environment ® Maintain End User Roles, in the transaction Configuration (SOLAR02).
       2.      You go to the transaction Maintain Objects (PP01).
       3.      Create a Job.
       4.      Assign Positions to the Job.
       5.      Assign Users to the Positions.
The learning map is later sent to the E-Mail address in the address data of these users.
       6.      Create an Organizational Unit.
       7.      Assign Positions to the Organizational Unit.
       8.      Assign Users to the Positions.

Where can I get an Html error report of all the syntax and tag problems?

Where can I get an Html error report of all the syntax and tag problems?

Thank you for your answer.
Where is the DW validation for me?
My files are in my computer so I don’t have an external URL.
File > validation > as xml = closes DW... Maybe because it is not a correct command for HTML,
And
Window > results > validation = gives a partial mistakes (e.g. shows an open tag without closing tag, but doesn’t show a closing tag without an open tag).
Thank you.

Learning Map html error

Similar Messages

Maybe you are looking for