Leaving mapped idoc segments out of plain text output

Hello all,
I mapped a customer IDoc with one header and detail lines to a message maping with one header and detail lines. The value's in the header are used for variable substitution for the file name.
The has to be writen as csv to a ftp server. I do this by using the file content conversion. Now I only want the detail lines to be written to the file so I only mensioned the detail line as the record set structure.
When I look at the output the header is stil part of the csv file.
Is there a way to prevent the header line being part of the output ? (of course without deleating it from the message type structure)
Regards,
Jasper

check this link
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
Try Using the following
Customer.addHeaderLine = 0
Customer is the structure here.
Reward if helpful.
Sachin

Similar Messages

How to map idoc segment field E1IDB02-FIIKONTO with BSEG-ESRNR.

Hi,
I have searched for lot of threads in the forum , and also i tried myself but i am not able to map this fields segment with my logic, so please anyone kindly contribute in mapping idoc segment field with the logic given below:
idoc type :PAYEXT outbound idoc.
message type: PEXR2002
This is my logic: i need to populate the ISR number(BSEG-ESRNR ) in idoc segment field( E1IDB02-FIIKONTO)
DATA : str1 TYPE string,
      len1 TYPE i,
      len2 TYPE i,
      str2 TYPE string,
      str3 TYPE string.
str1 = '01-1234-4'. ---> BSEG-ESRNR "ISR Subscriber Number
REPLACE FIRST OCCURRENCE OF '-' IN str1 WITH '_'.
REPLACE ALL OCCURRENCES OF '-' IN str1 WITH space.
CONDENSE str1.
len1 = STRLEN( str1 ).
IF len1 LT '9'.
len2 = '9' - len1.
CASE len2.
   WHEN '1'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '00'.
   WHEN '2'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000'.
   WHEN '3'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0000'.
   WHEN '4'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000000'.
   WHEN OTHERS.
ENDCASE.
ELSEIF len1 EQ '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0'.
ELSEIF len1 GT '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH space.
CONDENSE str1.
ENDIF.
Thanks in Advance.

Resolved.

Plain text output

HI all!
Is there any simple way to generate plain text output in BI Publisher?
The situation is very simple: the query is (for example)
select text1 from my.table1So I need to put only one column (as is, without special padding etc) in *.txt output, I don't need special formatting.
row1
row2
row3
...How can I perform this task?
I tried to create an RTF template where there is a simple table without borders and withoud headers, and made CSV format. But in csv format I see
a) the column heading (alhough there are no headings in RTF)
b) each output row is quotted
c) crlf character is not as I expected (if I open the output in NOTEPAD, I see squares where there should be CRLF character)

I can't try RTF - we need txt files which are subsequently loaded into the system which sends sms to clients.
Each file contains rows with information about client, mobile phone etc. All these rows are prepared in one field of the table, so the query in the Publisher is simple: select text_sms from table1.

IDoc (asynchron) - HTTP (synchron, plain text) - RFC

Hello,
I've implemented the following Business Process inside our PI 7.1:
Reciver -> Mapping -> Sender -> Mapping -> Sender
(getting IDoc) (IDoc to Plain Text) (sync, HTTP) (plain text to xml) (back to SAP using RFC)
My problem is, it works only until the first Mapping has finished and ends before the synchronsous sender.
It's a Java mapping which creats a Plain text containing the POST parameter which are needed for the HTTP
Request (no I can't send xml). The created payload looks the following way:
mid=1&portalid=xxx&key=xxx&mode=live&request=capture&encoding=UTF-8&txid=1&amount=0&currency=EUR&invoiceid=6510672402&id[0]=6510672402&pr[0]=0&no[0]=1&de[0]=6510672402
The error I get is:
could not create BPE proxy for message, no XML object definition found for message [msg id]
It's no XML message, but can't plain text be processed inside the BPM?
AFAIK I need the BPM for ASYNC/SYNC bridge.
Regards
Manfred

Hello all,
I've done the scenary three times on PI 7.1 in different ways and was not able to make it work. I've switched to our old XI 3.1 developer machine and tried there again. It worked at the first try. Don't ask my why, but after exporting repository and directory from the XI 3.1 machine and importing to PI 7.1, it also worked there.
I can't say, what's the reason, but we also had cache problems on the PI 7.1 last days (interface mappings where not found), maybe it simply was a cache problem...
Thanks for your help,
Manfred

Idoc segments missing in the final output

hi
Using a file - idoc mapping. have mapped all relevant fields, but in the output only segments show up. not getting all the mapped segments when i test this message mapping. Could anybody please guide me.
thxm
Pradip

Hi Pradip,
see the cardinality of the node which is having the line items......if it is 0..1 then only the first line item will be used in mapping...........if it is 0..unbounded then only all your line items will be shown........so in your mapping test, in source file can you see all the line items in the tree structure.......check the cardinality of your target node also............if it is 0..1 then only the first line item of source will be mapped.
Thanks,
Rajeev Gupta

How to map idoc segments to multiple output structures

Dear experts,
On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
Idoc structure is as follows:
- 1 header segment
- 1..n detail segments (which I need to map to outputstructure 1)
- 1 summarisation segment (which I need to map to outputstructure 2)
Output needs to be a .txt file.
I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
Thanks in advance,
William

Hi
You can do 1:n multimapping
in message mapping in messages tab ..add both the structures in target tab and do the mapping
and in operation mapping add both the message interface on the target side
PLease go through this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

How to map IDoc segment with qualifiers

Hi everyone!
I have the following problem: In an IDoc of type DESADV01 there can be several segments of type E2EDS01. Each segment has a different qualifier, which is the value of the field SUMID in this case. My target structure (type EDIFACT) now has several segments, each again with a sort of qualifier. Now I have to map the values of certain source segments to the respective target segments.
Exaple (in XML format):
Source
<E1EDS01 SEGMENT="1">
 <SUMID>021</SUMID>
 <SUMME>0000000001.000</SUMME>
 <SUNIT>KGM</SUNIT>
</E1EDS01>
<E1EDS01 SEGMENT="1">
 <SUMID>022</SUMID>
 <SUMME>0000000001.000</SUMME>
 <SUNIT>KGM</SUNIT>
</E1EDS01>
Target
<S_MEA>
 <C_C502>
 <D_6313>N</D_6313>
 </C_C502>
 <C_C174>
 <D_6411>KGM</D_6411>
 <D_6314>1</D_6314>
 </C_C174>
</S_MEA>
<S_MEA>
 <C_C502>
 <D_6313>G</D_6313>
 </C_C502>
 <C_C174>
 <D_6411>KGM</D_6411>
 <D_6314>1</D_6314>
 </C_C174>
</S_MEA>
(i have omitted several details here, but I'm only interested in the general procedure anyway).
So in general the source segment with qualifier "021" should be mapped to a target structure with qualifier "N" etc.
How can this be done using standard XI mapping techniques?
Regards, Joerg

Hi everyone!
Thanks for your input data - unfortunately this wasn't quite what I was looking for. However I thik I solved my original problem and I just wanted to share this solution with you - maybe it helps others, maybe some of you have suggestions what I could do differently.
To sum up the requirement: There can be multiple input segments, each with a certain qualifier. These input segments have to be mapped to the target segments, respectively - however, the qualifiers change. There can be several segments with qualifiers that do not match the requirement, and required segments might be missing.
So here's what I came up with:
Use the qualifier of the source segments as an input to a FixValues function. In this function, map the desired qualifiers to the value true, use false as the default value. Map the output of the FixValues function to a createIf function and use this to create the desired output segment. This way, for each of the required segments, one target segment will be created. All other segments (with unwanted qualifiers) will be removed.
So far, this technique worked for me - do you have improvements/suggestions?
Regards, Joerg

Message Mapping IDoc-segment

Hello,
In my scenario I will do the following mapping with an source structure to an ORDERS05 Idoc:
file structure:
#E1EDP01|10|33|ST
#E1EDP20|33|20050823
inbound message:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_ORDERS_OUT xmlns:ns="http:/ /ORDERS">
<E1EDP01>
<IDENTIFIER>#E1EDP01</IDENTIFIER>
<POSEX>10</POSEX>
<MENGE>33</MENGE>
<MENEE>ST</MENEE>
</E1EDP01>
<E1EDP20>
<IDENTIFIER>#E1EDP20</IDENTIFIER>
<WMENG>33</WMENG>
<EDATU>20050823</EDATU>
</E1EDP20>
</ns:MT_ORDERS_OUT>
MT_ORDERS_OUT to IDOC ORDERS05 :
E1EDP01 ___> E1EDP01
POSEX ____> - POSEX
MENGE ____> - MENGE
MENEE ____> - MENEE
E1EDP20 ______> E1EDP20
WMENG ________> - WMENG
EDATU _________> - EDATU
configuration of the file adapter:
recordsetstructure: E1EDP01,,E1EDP20,
keyfield: IDENTIFIER
E1EDP01.keyFieldValue = #E1EDP01
E1EDP01.endSeparator = 'nl'
E1EDP01.fieldSeparator = |
E1EDP01.fieldNames = IDENTIFIER,POSEX,MENGE,MENEE
E1EDP20.keyFieldValue = #E1EDP20
E1EDP20.endSeparator = 'nl'
E1EDP20.fieldSeparator = |
E1EDP20.fieldNames = IDENTIFIER,WMENG,EDATU
With this configuration, the result is only a mapping of the E1EDP01 fields.
I can't see the E1EDP20 fields in the IDoc.
Did I something wrong?
Regards
Christoph

Hello Shravan,
I guess my file adapter is not doing the correct conversion.
The payload of the inbound message must look as follow:
<E1EDP01>
<IDENTIFIER>#E1EDP01</IDENTIFIER>
<POSEX>10</POSEX>
<MENGE>33</MENGE>
<MENEE>ST</MENEE>
<E1EDP20>
<IDENTIFIER>#E1EDP20</IDENTIFIER>
<WMENG>33</WMENG>
<EDATU>20050823</EDATU>
</E1EDP20>
</E1EDP01>
my actuel payload looks like:
<E1EDP01>
<IDENTIFIER>#E1EDP01</IDENTIFIER>
<POSEX>10</POSEX>
<MENGE>33</MENGE>
<MENEE>ST</MENEE>
</E1EDP01>
<E1EDP20>
<IDENTIFIER>#E1EDP20</IDENTIFIER>
<WMENG>33</WMENG>
<EDATU>20050823</EDATU>
</E1EDP20>
Who can help me, with the conversion?
Christoph

Reg:Mapping (IDOc Segment)

Hi Guys,
In my mapping has many segmants at sender but i need to map one field from one segment to one target filed thats fine if ,but i want to map same fields from all segments to target field.
please give me solution
Thanks

In my mapping has many segmants at sender but i need to map one field from one segment to
one target filed thats fine if ,but i want to map same fields from all segments to target field.
If your Target Field is 0..unbounded then you can duplicate the target node and then map each node to each of the source node
If your target node is 0...unbounded and you dont know how many times the source node is going to repeat then just directly map the source node to target...so that target will repeat as many time as the source repeats....
If your Target node is 0..1...then make sure that the parent node containing this node is repeating....map the source node to the parent node and also to the target node.....you will need to increase the Context of the source node in this case....when you map it to the parent node...
Regards,
Abhishek.

Plain Text Not available in Control Properties

Hi,
I am not sure if this is a strange behavior or its an expected one. We have a BI query and pulled in an Input Form and then the output to a table. On clicking on this recoed it should display all the output fields in a form with its name and value. For the parameters I do not see an option for selecting Plain Text. It gives me only input field, dropdown, text editor.
Why is this happening? Is there any way that I can map these fields to a plain text?
Thanks,
Nagarajan.

Hi,
Sorry for not being clear. From the BI Query Out port I have a Table which will display the result values. Now when I select any of the row item in the table there is a form connected from the table out port. This form should display all the details of the row item. When I try to look into the control properties for these parameters in the form I don't have an option to select plain text.
I can only display the values in the input field. I want these values to be displayed in plain text instead of input field. Logically it makes sense because there should be two plain text fields for a value because one text field will display the Parameter name and one will display its corresponding value. That's the reason it is not available.
But just chekcing if there are any easier way to do this other than creating 2 plain text fields for one parameter and mapping these items. Because I have around 40 fields to be displayed which will be make my life worse by manual creation
Thanks,
Nagarajan.

Different rich text/plain text settings for different accounts?

I use Mail for both my work email (MS Exchange) and my personal email (webmail/IMAP). Many of my coworkers use Outlook's rich text formatting options, so I need to have my work emails go out as rich text. However I'd like to have my personal emails go out as plain text.
I can set Mail to create new messages in plain text, but to reply in the same format of the original message. That takes care of everything EXCEPT when I compose a new message using my work address... in that case it goes out as plain text, and my coworkers complain that they can't use formatting, because their copies of Outlook are in turn configured to reply in the same format as the original message.
So ideally what I'd like is to have two different formatting settings for my two different accounts. Anyone know how this might be done? Any plugins, etc., that might accomplish this?

Since you are running Jaguar, Jaguar and Panther Mail do not support composing in HTML and this includes when forwarding a message received that was composed in HTML.
Since Jaguar and Panther Mail do not support composing or forwarding HTML, you can't embed images or photos in the message body anyway.
RTF with Tiger Mail is really HTML and although Tiger Mail does not include an HTML composer/editor, you can copy/paste HTML format from a web page and forward HTML received.
Images/photos and single page PDF attachments are revealed as inline or viewed in place within the body of the message by default which cannot be turned off. This applies to received and sent messages which is not the same as being embedded. Embedded requires HTML and an embedded attachment is not a true attachment. All Mail.app versions render HTML received but you cannot attach a photo or image as embedded with Jaguar or Panther Mail so it doesn't matter if you use RTF or Plain Text in regards to photo/image or single page PDF attachments which appear as inline or viewed in place within the body of the message by default regardless.
When you use Plain Text for message composition, the receiving mail client renders the text in whatever font the reader chooses.
IMO, everyone should use Plain Text for message composition. Messages would be boring to some but the majority if not all problems experienced with email would be eliminated if HTML was banned from message composition.

Inbound idocs segment fields

Hi,
Iam new to idocs and a functional consultant. I need to know whenever we receive the inbound idocs and if i see the segments of the inbound idoc, do the fields which i see in the segments are the sap fields.????/ for instance if the inbound idoc needs to create a sales order, then the fields of the segments of such an inbound idoc are the normal sap sales order fields ??
do i need to give functional specs to the abapers that whenever the inbound idocs is received the segments fields need to be mapped to sales order fields if such an idoc needs to create a sales order ??
regards
sachin

Hi Sachin,
Most of the IDoc segment fields are simmilar to SAP transaction fields e.g. most of the ORDERS IDoc segment fields will be simmilar to what you can see in VA01/VA02 screen fields.
Some fields may have different names.
In the case of few segments which may repeate in IDoc with different qualifiers (such as partner details, date segments), fields will be same but different qualifier value decides where these field values will be populated in the Order.
If you are using standard function module to create Order, it will take care of mapping IDoc segment fields to VA01/VA02 screen fields. But if it is a Z function module, then you need to specify the mapping.
Hope this information will help you.
Regards,
Mahesh Pakhale

BIP report in plain text/fixed format.

Hi,
Is there an option for a BIP report to go out in plain text/fixed format. I dont see that option in the drop down where we select the format and view/send/schedule reports. Is this plain text/fixed format available in BIP at all? Also if I need to send/schedule a report with report name+date...can BIP do that? Please adivce. Thanks.

There is no plain text format.
Fixed format means you can select the format you need from the Limited Output Format.If You select only PDF for example the user able to see only the PDF output.
While You schedule the Report under the Report parameter tab
you will get the Template and the Format option .There u can select the Format you want to send.
Thanks

Need to generate check writing output in plain text format in 12.1.3.

In 11.5.10.2 a plain text file output can be created which is then used with a third-party software from Secure32 to create AP checks. Now in 12.1.3 I cannot get this same plain text output for check writing. The XML output contains flags which cannot be used with older version of Secure32 (upgrading Secure32 is not an option)
Go-live is 30 days away and AP check cannot print. Because of time constraints theire is no time to set up and use the embedded R12 check writing features.
Any help of tips would be appreciated - thanks.
Edited by: user702225 on Dec 20, 2011 9:24 AM

In 11.5.10.2 a plain text file output can be created which is then used with a third-party software from Secure32 to create AP checks. Now in 12.1.3 I cannot get this same plain text output for check writing. The XML output contains flags which cannot be used with older version of Secure32 (upgrading Secure32 is not an option)
Go-live is 30 days away and AP check cannot print. Because of time constraints theire is no time to set up and use the embedded R12 check writing features.
Any help of tips would be appreciated - thanks.
Edited by: user702225 on Dec 20, 2011 9:24 AM

ASCII text output

How do I generate a ASCII report with Reports Builder (Oracle9i DS)?
I want plain text output with white spaces between columns.
Thanks,
Alex

Hello Alex ,
ASCII report with Reports Builder (Oracle9i DS):
Generate to file in delimited format.
File -> Generate to file - > Delimited -> Delimeter = space
With Regards
Sachin

Leaving mapped idoc segments out of plain text output

Similar Messages

Maybe you are looking for