Length exceeds When report run in bachground.

Hi,
When I run the report in back ground, output eceeds and getting data in next lines.
I need output in a single line each record.
Suggest me on this issue.
Regards,
Rayeez

Hi,
Change the width of your report according to your requirement.
You can do this the following way :
report zzzz line-size i.
where i is a numeric constants.
Regards,
Abhinab Mishra

Similar Messages

How to change the Browser title when report runs on the web?

Hi folks,
How to change the title of the browser when I run my report on the web? Iam using Internet explorer and Reports 6i. Is it possible in 6i or 10g reports?
Could you please tell me the step by step procedure ?
Right now the browser is displaying the URL when I run the report with format = PDF.
Thanks.

It works for me. I don't see why you have a problem with >this code.
Can you look at the source code of the html >file that was created (so, not in the browser, but in a >text editor). What do the header and title look like?The Html code in the file is same as the above code I specified. Actually I copied the same code and pasted here. But when I run the html file the Title shows up.
Don't put </html> there. Maybe that helps. I tried this, but it did not work.
Please let me know is there any way to set it dynamically inside the triggers using SRW built_in.
Thanks alot.

Less coloumns displayed when report run in background

Hi,
There is a problem, when i run a report in background last few columns are not displayed. But when i run it in foreground all the columns are displayed properly.. Bt since the report hs to be run background, I need to fix this issue..
Cn anyone explain why this is happenin and wht i cn do to rectify it?
Thanks
Keshi

Hi,
Use REUSE_ALV_GRID_DISPLAY and you will be able to run the report in foreground or background.
If you must use OO ALV controls, you won't be able to run the program in background. In this scenario, I would check SY-BATCH and if it is set, I run REUSE* FM and if not I do CALL SCREEN..
If you are using the ABAP Grid Control (OO object), you can still create the ALV list as a spool listing for the background job.
The easiest way to do this is to put all the create object statements and method calls for the custom container and ALV grid object inside a subroutine (for example, present_grid).
All that is required is a simple check of the sy-batch variable to determine if the program is being executed in the foreground or background.
e.g. if sy-batch is initial.
call screen 0100.
else.
perform present_grid.
endif.
In a PBO module of screen 0100, the subroutine present_grid is also performed.
The set_table_for_first_display method will be invoked in the routine present_grid, however, due to the job being executed in the background, the ALV list output will be written as spool output for the background job.
Regards,
Srini

Call javascript to expand detail row when report runs

Hi,
Is there any way to call javascript when report is run? What I want to do is to expand all detail rows (of Carl's Ajax report row detail example) when the report is run. In the original example, an user needs to click the link in the report row in order to display its detail row. I would like to expand all the rows as soon as the report is run.
Thanks.
Andy

Hi Andy,
You can use jquery to fire all the onclick events within the DIV's on the page.
In the HTML Header add
<script type="text/javascript">
function allclicks(){
$("div").click();
</script>In the HTML Body Attribute add
onload="allclicks();"You will also need to load the jquery files.
Regards
Paul

Data is missing in Even Page when report running in background (spool)

Hi
I have this weird problem in my report. The report would run in background convert the data in to PDF from spool and then email it to people.
Now when the PDF has more then 1 page the error occurs.
It drops the last row from the even page. The total at the end and every thing shows correctly. If there r more than 2 pages then on page 3 the last row is not dropped and its all fine but again on page 4 it drops one record and on page 5 again its working fine.
One thing is it also puts an extra line(horizontal line which is not in the code) on those pages where its unable to put the record and its always the last one on the even page. I also looked up the spool. Its doing it in the spool too. So i think its not the PDF converter its when the spool is getting created for some reason its droping the rows for the even pages...
Did any one else encountered some thing like this? please help.
Thanks
Message was edited by:
Anwarul Kabir

is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
Please Help!

Virtual Memory System error when report run on developer 6i

I want to execute a report via ref cursor which is called from a package on developer 6i. I have face a error.Which is
Rep: 0065: Virtual Memory System error.
Rep 0200: Cann't allocate enough memory cavaa22.

I get the same error. I speed up the virtual memory system of the operating system.

Internet explorer consuming huge memory when OBIEE reports Run

Hi all,
I am running OBIEE report. But when reports run for displaying results, then Internet Explorer consumes huge memory( can view in Task Manager) and so all other application becomes very slow and dont work. I am using XP operating system and 1 GB Ram. OBIEE is installed at Server and i am running report at other system by accessing URL of the server.
Please tell me the solution so that Internet Explorer does not consume huge memory.
Thanks,
Avnish

Use FireFox.

SQL Azure Reporting - There was an exception running the extensions specified in the config file. --- Maximum request length exceeded.

I am trying to deploy an RDL file (5MB) to SQL Azure Reporting server in South Central US using the deploy function in SQL Server Data Tools but facing the following error during deployment to Azure Reporting server.
"There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded."
Is there any limit on the size of RDL files which can be deployed to Azure Reporting server? I have seen some online posts which talk about increasing the maxRequestLength in httpruntime of web.config in Reporting server. But in case of Azure Reporting server
how can be make modification to this configuration?
I have tried to upload it directly to SQL Azure Reporting server from the Management Portal --> Upload Report function which still resulted in error.
Thanks & Regards, Deep

Thanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services. Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
Thanks Guy

Error when I run report RSCMST to test the content server.

when I run report "RSCMST" to test the my content server.    I get the error:
header        HTTP/1.1 401 Authorization Required
              date: Fri, 05 Dec 2008 20:20:45 GMT
              server: Apache/1.3.41 (Unix) SAPCS/640
              x-servertime: 20:20:45
              x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
              t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
              x-serverdate: 2008-12-05
              x-pversion: 0046
              x-errordescription: URI signature has expired
              x-serverid: server="content01.ivo.com.cn";serverPort="1090"
              x-servertype: SAP HTTP Content Server
              content-length: 752
              connection: close
              content-type: text/plain
              ~remote_addr:
              ~uri_scheme_expanded: NONE
want                 201
bad           401
time              17.974
It seems that the "bad 401" means a http error.    I do not know how to configure it ?
my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
who can give me some advices? thanks

Victor,
        Looks like a web server authentication issue. I suggest you raise this issue in a basis/ web application server forum,
Sojan

Problem In report output display when i run in the background

Hi,
In a classical report i am printing around 17 fields the width of the report out put is around 800 characters.
If i run the report in the fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
so i wanted to run it in the back ground to avoid TIME OUT problems.
But when i run in the backgroud i am not getting full out put in the SPOOL request(SIZE of the report output may causing the problem) .
Pls come up with some solutions
Thanks in advance

Try increasing the spool length..
Refer this link for doing so.
Spool List output display > 255 char when the rpt is run in Background
Thanks
mahesh

Save when the report run in BPC and pull&show LAST Rundate-BPC5.0

All,
We have one report on which we forecast positions and send data to BPC. Next time when we open report we also see the old forecast data and we never new data. I was wondering, is there a way I can save the "Report Run date in BPC when we send data using script/procedure and next time when user pulled up the report we can show the "last time ran" date? This way user knows when the last time he/she ran the report. Otherwise he/she has to keep manual track of run date.
Thanks.
Saquib
SAP BPC version 5.0

Not sure what you are asking...
1) '' isn't the same thing as NULL. '' is an empty string.
2) The "0" simply set the format of the output string created by the ToText function.
When you use the ToText function the default output is to add a decimal followed by 2 places after the decimal...
For example:
IF {#DetailRTotal} = 22
The default of ToText({#DetailRTotal}) would be 22.00.
If you want to trim that down to just 22, you would change the formula to this...
ToText({#DetailRTotal}, "0")
The format is now set to display at least 1 whole number and no decimals.
In fact, if you want to clean up your formula... Re-write it like this...
RIGHT(ToText({#DetailRTotal}, "0000000"), 7)
This will force a 7 character minimum format in in the ToText function and the RIGHT(........, 7) will trim off any characters that exceed the 7 character limit.
So if {#DetailRTotal} = 22
RIGHT(ToText({#DetailRTotal}, "0000000"), 7) will yield 0000022
If {#DetailRTotal} = 123456789
RIGHT(ToText({#DetailRTotal}, "0000000"), 7) will yield 3456789
HTH,
Jason

When I run a report from a certain website, it is in Excel format. Currently I have only the option to save it. I also want the option to open it. How do I get this option back? [SOLVED]

In IE, when I run these reports, I have the option to Open, Save, or Cancel. In Firefox it just goes directly to a folder to Save, there is no Open option, which I need. I want to view the report immediately, not save it.

I figured it out - Tools, Options, Applications. For Excel, change to Always Ask.

Error when OO ALV report run in background

Hello all,
We recently applied stack 12 for a 7.0 system. My custom ALV report using CL_GUI_CUSTOM_CONTAINER coding now returns an error when run in Background. It works fine in dialog.
The error occurred in program CL_GUI_CUSTOM_CONTAINER=======CP. The log message was "Control Framework: Fatal error - GUI cannot be reached".
Is there a solution for OO ALV reports run in the background? I would not like to re-write my ALV reports using the function call. Any advice is appreciated. Thanks!!

Yes, you need to code it a little differently, but you can still use CL_GUI_ALV_GRID. Here is an example.
REPORT ZRICH_0006 .
DATA: ITAB TYPE TABLE OF MARA.
DATA: R_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: R_CONTROL TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: G_DOCK TYPE REF TO CL_GUI_DOCKING_CONTAINER.
DATA: OKCODE type sy-ucomm.
START-OF-SELECTION.
SELECT * FROM MARA INTO TABLE ITAB up to 100 rows.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
IF R_CONTROL IS INITIAL.
* Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
* Run in foreground
      CREATE OBJECT R_CONTROL EXPORTING CONTAINER_NAME = 'CONTAINER_1'.
      CREATE OBJECT R_GRID EXPORTING I_PARENT = R_CONTROL.
    ELSE.
* Run in background
      CREATE OBJECT R_GRID EXPORTING I_PARENT = G_DOCK.
    ENDIF.
    CALL METHOD R_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
    I_STRUCTURE_NAME = 'MARA'
    CHANGING
    IT_OUTTAB = ITAB.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OKCODE.
    WHEN 'BACK'.
      leave program.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Regards,
Rich Heilman

Output shown blank when we run report in xml publisher using excel template

Hi,
1) We have a requirement where we need to run report to shown 100 columns. Since Microsoft word supports only 63 columns. So we are building the report template in Excel.
2) When I run the report in Excel locally I get the output. But when I uplaod in BIP server and then run the report It gives a blank output.
BI Publisher version 10.1.3.4.1
BI Publisher Desktop version 11.1.1.5
Please look into the issue.
Please help
Thanks,
Nita

Pl post details of OS, database and EBS versions, along with the database characterset.
Are you creating PDF output ? Can you print Chinese characters when using US/UK operating units ? Are you using Pasta ?
How to Generate PDF Output With UTF8 in R12? [ID 778970.1]
HTH
Srini

No result /report when weu00B4re running a risk analysis in background

Dear forum,
We are running several risk analysis in background (from configuration tab) and we cannot see any result
in the column called "result". However, when we run a offline analysis (from informer tab) we can see that the column "result" is containing a file.
Hope you can help us.
Thanks in advance.

Running risk analysis in background from the configuration tab does not produce a report by design. This background job is really just performing a system maintenence activity and is not intended for report generation. This background job preps data for performing offline analysis as well as the underlying data that supports the management reports in the informer tab (among other things). Generally, anything in the configuration tab is system maintenance related.
It sounds like you're attempting to perform typical analysis of end user access, not system maintenance activities. The informer tab is what you need to be using to perform the analysis.
Within the informer tab, whether you choose to perform online analysis or offline analysis, a report result is always generated. In my experience, there has not been a compelling reason to use offline analysis capabilities within the informer tab. Online analysis (real-time analysis of the SAP system rather than the offline data from the last configuration tab background risk analysis) is naturally always current, which is a plus.

Length exceeds When report run in bachground.

Similar Messages

Maybe you are looking for