Length restriction on literal value for constant defined declaratively
When defining a program data item which is a constant varchar2(120) - I am restricted to a default value of length 60 (about 50 short of requirements). Does any one know why this length restriction is applied. Is there an intention to remove this limitation?
1. In Forms 6i, there is a limit of 255 characters on the FORMS60_PATH. The
forms runtime crashes, if the length becomes 256 characters or more.
This is documented in Note 125007.1 Access Violation in Ora805.dll Caused By
Forms When Forms60_path Longer Than 255 Chars
2. In Forms 9i/10g, the limitation is 511 characters. If FORMS90_PATH contains
512 or more characters, it is ignored. ORACLE_HOME cannot be more than 39 characters long.
3. In Forms 10.1.2, the limit has been increased, that is, FORMS_PATH length has been doubled (1024).
The new limit for ORACLE_HOME is 68 characters.
A workaround
Set ORACLE_PATH
Regards
Similar Messages
-
How to assign the two values for constant (same key)
How to assign the two values for constant (same key)
CONSTANTS: c_pstkey TYPE bschl VALUE '09',
c_splgl TYPE umskz VALUE 'I',
c_buzei TYPE buzei VALUE '001'.
using BSCH1 again i have two asign vaue
can you just let me know
Edited by: sravya_se38 on Nov 23, 2010 12:14 AMYou can create a structure for that constant .
You can define in this way
CONSTANTS : BEGIN OF c_pstkey,
01 TYPE bschl VALUE '01',
02 TYPE bschl VALUE '02',
END OF c_pstkey.
and can access using...
c_pstkey-01, c_pstkey-02 ........ -
Error in parsing value for 'clip'. Declaration dropped
I have a site working for years, www.atlantida-adm.com.br, with the new version a javascript box with scroll doesn't work.
It still working on IE, but my customers are asking me why stop work on Firefox.
I use Firefox 15.0.1 as my default browser and I'm trying to do the same into the company.
The scroll box are titled as "AVISO"
The full message: Error in parsing value for 'clip'. Declaration droppedThis is FF being pedantic about code...
If you're trying to set a CSS Style measurement property with Javascript, you need to specify the measurement unit (eg "px", "%", "em", etc as you do in CSS) as a string. Passing an integer (without the measurement unit) into the property value causes the error.
Example:
<pre>
var w = 10; //Assign an integer to variable w
/* Now let's try passing w to set the CSS Width property of ''element'' */
''element''.style.width = w; // This Generates an error in FF,
// but works fine in IE (IE doesn't generate
// an error because it just assumes you mean "pixels"
// when you pass an integer in the script.)
''element''.style.width = w+"px"; // This works in both FF and IE. Will set the width to 10 pixels.
</pre> -
How to restrict the attribute values for the user in query designer
Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY -
How to restrict the Null Values for Key Figules in the Bex Query
Hi Friends,
I want to restrict the Null values of a perticular key figure in the Bex Query Output.
I will explain in details. i have 3 key figures in my query.. let us assume.. key1 key2key3
key1 key2 key3
4 4 100.00
5 0 200.00
1 0 19.00
0 1 10.00
i don't want to see the the records for which key 2 is 0.
we have a setting in the Bex Query for restricting the Zero values in the query properties. If we enable that setting it will show
4 4 100.00
but i want the report to display..
4 4 100.00
0 1 10.00
can any body guide me. <b>i want to display the values if key2 <> 0.</b>
Regards,
Nagesh.Hi AVR,
nice to see reply.
can you eloborate your view...how can i put the condition.
<b>i want to put the condition key2 <> 0.</b>
Regards,
Nagesh. -
Using a selection option Var on a restricted list of values for a char
hi all,
i am trying to use a selection option variable in a restricted list of values in a characteristic. for example. company code has the following values:
1) GB01
2) GB02
3) GB03
4) MY01
5) SG01
and so on.....
Now, i would like to restrict the list of values into GB01, GB02 and MY01.
and based on this restricted list, i will again need a variable to do a selection option in the report.
Do you think this is possible? what will be the solution to this?
i have tried to restricted it with 2 variables but it doesnt allow that.
cheers,
willieADF Faces has a very small learning curve, at least
on top of learning JSF itself, - it's a JSF component
library with some extra JSF framework features, but
you can use only the bits you want. It is
proprietary to the extent that you're using some code
that isn't a standard, but we run right on top of the
JSF standard (and you can use either MyFaces or the
Sun RI), so there's not a whole lot of lock-in.Ok sounds good and I am aware of a lot of the work that Oracle has been doing. I would like though ask you some additional questions.
Could you contact me at [email protected] if it is not too much trouble.
Thanks much. -
Restrict F4 help values for select option
Hi All,
How to restrict the F4 help for select option in Webdynpro for ABAP based on some input.
Regards,
Karthick SHi Karthick,
Use OVS help. It will take your inputs for search and give you corresponding search value list.
Refer my blog, it will be helpful.
[OVS Help in WDA|/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap]
Thanks. -
Values for user defined charactericts COPA
Hi,
I have creatd some client specific characteristics in my configuration, How can i assign vallues to those characteristics?
Regards
AshishHi
Use Derivation rules for deriving Characteristic values. (KEDR). You can also manually input values vide KES1
Jayaram -
QE71 -F4 Values for user defined fields in inspection points
Hi,
I have used QAPP_CUST_IP_F4 function module to list F4 values in Inspection points and QAPP_CUST_IP_CHECK for validation of those user fields.
When configured for an inspection point, these modules are working fine when we use in QA32 and QE51n. But when we use QE71, the FM's does not getting called.
Is there any configuration needed to make them work in QE71?
Regards,
SriramSame kind of issue we have faced in one of my implementation ie when we used to do the RR through QA32 system allows us to show the F4 which is assigned for that inspection point. But same F4 help was not working during rr through QE71.
For this issue we haven't applied any note by debugging in QE71 fixing call function he done some changes in the assigned FM
after that its appered in QE71 100% it will flow in QE71 also without NOTE.
Check with abaper
Link: QE71 - verifiying user fields and providing lists of values -
What is the Best Approach for System Defined Fields and Default values
Hi ,
Please let me know that what can be the best approach for providing a Default value for the System defined fields when creating a User and How can we hide the System defined fields at the time of User creationYou cannot provide default values for any attributes defined in the FormMetaData.xml file. You can only provide default values for fields defined in the User Defined Fields and supply a default value.
You can using entity adapters to populate some of the values, but you must supply an Organization because there is an entity adapter that you cannot modify that verifies the organization name.
-Kevin -
Batch Input for user defined fields (SRM 4.0)
Hello.
Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
How do I scroll in SRM?(What's the command to scroll in SRM)
Regards
Ogiwarabetter lock the user since he may some business documnt open and you can not proceed further.
br
muthu -
How to set value for selectOneChoice
Hello,
How to set value for selectOneChoice defined as:
<af:selectOneChoice label="Label" id="soc1" binding="#{DepositorMergingBean.socSurnameComponent}">
<f:selectItems id="si1" value="#{DepositorMergingBean.socSurnames}"/>
</af:selectOneChoice>
where socSurnames is List<SelectItem> - manually filled list of SelectItem(SomeObject, (String)text_description), so - SOC is filled manually (no binded iterators, etc..)
Neither socSurnameComponent.setValue( new Integer(0) ) nor socSurnameComponent.setValue( socSurnames.get(0) ) do not help.
Thanks in advance.this.selectOneChoice.setValue(selectItems.get(2).getValue());Try as per the following sample:
SelectOneChoiceTest.JSPX:
<af:form id="f1">
<af:selectOneChoice label="Select One Choice" id="soc1"
binding="#{SelectOneChoiceTestBean.selectOneChoice}">
<f:selectItems value="#{SelectOneChoiceTestBean.selectItems}"
id="si1"/>
</af:selectOneChoice>
<af:commandButton text="Set Selected Value" id="cb1"
actionListener="#{SelectOneChoiceTestBean.onClick}"/>
</af:form>
SelectOneChoiceTestBean.java:
import java.util.ArrayList;
import java.util.List;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.view.rich.component.rich.input.RichSelectOneChoice;
public class SelectOneChoiceTestBean {
private RichSelectOneChoice selectOneChoice;
public SelectOneChoiceTestBean() {
super();
private List<SelectItem> selectItems;
public void setSelectItems(List<SelectItem> selectItems) {
this.selectItems = selectItems;
public List<SelectItem> getSelectItems() {
selectItems = new ArrayList<SelectItem>();
selectItems.add(new SelectItem("One", "One"));
selectItems.add(new SelectItem("Two", "Two"));
selectItems.add(new SelectItem("Three", "Three"));
return selectItems;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
public void onClick(ActionEvent actionEvent) {
this.selectOneChoice.setValue(selectItems.get(2).getValue());
Thanks,
Navaneeth -
Error in parsing value for display
Hi
I'll try to access a website http://sinaica2.ine.gob.mx/magic/rmart but Firefox 8.X and 9.X dont show me a frame inside the middle of the new window, but any other browser also an older version of Firefox does well.
Firebug reports me a warning "Expected end of value but found ':'. Error in parsing value for display. Declaration dropped.
Any clue for solving this issue?
kind regards,Yes, I can confirm that it works with Firefox 7 and not with later Firefox versions including the current Nightly build.
That CSS error isn't related to that problem AFAICT.<br />
Looks that Firefox doesn't run the JavaScript in that frame to replace it with that content frame.
*http://sinaica2.ine.gob.mx/magic/rmart/null/_framework
*http://sinaica2.ine.gob.mx/GJresources/gjframework.js
*http://sinaica2.ine.gob.mx/magic/rmart/0a6ccd1903653aa55f092fa48e1ec6ce/main -
Error in parsing value for width, Declaration dropped
Warning: Error in parsing value for 'width'. Declaration dropped.
Line: 0
== URL of affected sites ==
http://webstie.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)This is FF being pedantic about code...
If you're trying to set a CSS Style measurement property with Javascript, you need to specify the measurement unit (eg "px", "%", "em", etc as you do in CSS) as a string. Passing an integer (without the measurement unit) into the property value causes the error.
Example:
<pre>
var w = 10; //Assign an integer to variable w
/* Now let's try passing w to set the CSS Width property of ''element'' */
''element''.style.width = w; // This Generates an error in FF,
// but works fine in IE (IE doesn't generate
// an error because it just assumes you mean "pixels"
// when you pass an integer in the script.)
''element''.style.width = w+"px"; // This works in both FF and IE. Will set the width to 10 pixels.
</pre> -
How to use a constant defined as a concat of char values in an IN clause
Greetings,
I defined a CONSTANT as a concatenation of values and attempted to use it in an IN clause without success ...
CREATE OR REPLACE PACKAGE PKG_TEST AS
Q_IDS CONSTANT VARCHAR2(25) : = '''3'''||','||'''14'''||','||'''16'''||','||'''18'''||','||'''24''';
procedure insert_test;
END PKG_TEST;
CREATE OR REPLACE PACKAGE BODY PKG_TEST AS
PROCEDURE insert_test as
BEGIN
insert into test1
select *
from test_table
where q_id in ( Q_IDS );
END insert_test;
END PKG_TEST;
I'm guessing this doesn't work because the CONSTANT is being treated as one long string as opposed to a succession of comma separated values.
Is there a way to do this?
Any feedback would be appreciated.
Thank you.One example:
SQL> ed
Wrote file afiedt.buf
1 select *
2 from emp
3 where ename in (
4 with t as (select '&input_string' as txt from dual)
5 select REGEXP_SUBSTR (txt, '[^,]+', 1, level)
6 from t
7 connect by level <= length(regexp_replace(txt,'[^,]*'))+1
8* )
SQL> /
Enter value for input_string: SCOTT,JAMES
old 4: with t as (select '&input_string' as txt from dual)
new 4: with t as (select 'SCOTT,JAMES' as txt from dual)
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7788 SCOTT ANALYST 7566 19-04-1987 00:00:00 3000 20
7900 JAMES CLERK 7698 03-12-1981 00:00:00 950 30
SQL>
Maybe you are looking for
-
Pull data and store in a UI ... please help
"Code to Pull data from ASCP, OM and Inventory, consolidate the data and push the data to UI " this is my task, and i'm kinda new to API's and data pulling ... please help me with the steps ..and procedure to perform this task ... Thanks in advance E
-
IPad will not connect to air play
I can not get my iPad 4 to connect to Apple TV. It will connect if I go through the process of resetting up the Apple TV, but once I stop the connection the iPad will not reconnect. I've rebooted the iPad and the Apple TV. They are both on the sam
-
Rp_provide_from_last infotype subtype pn-begda pn-endda.
Hi All, Is there a way to find out if a subtype exists before using this macro. If a subtype does not exist then it crashes. rp_provide_from_last infotype subtype pn-begda pn-endda. Thanks, ~Mark
-
Cannot Boot (Partition Help)
Ok so I got a new hard drive, a WD 500gb Scorpio Black. I had a nice Arch installation for awhile now, but i can't get running on this new drive. I read something about 4096 (?) being a part of new drives and everytime I install I get warnings. I tri
-
Zen Extra Not Detected after upgr
Hi All, I have a 30GB Zen Extra with firmware .03.02 and an XP ServPak 2 laptop with all current critical updates. This morning I upgraded from MediaSource Organizer 2.0.07 to Creative MediaSource Player/Organizer 5.0.38. When I run MediaSource Playe