Lens Profiles, have issues with the Fish Eye lens profile.

    So this weekend I had a lot of fun backing up 56,000 images onto a brand new 4 TB Seagate external hard drive, I previously had them on a smaller external. Anyway, I noticed when I went back into LR that some, not all with no rhyme or reason,  that the image would change ie. in the Lens profile I noticed that the value went from whatever lens I shot with. To of all lens profiles the Fisheye Profile. I started going back in and changing the profile back, however I noticed that you can only change one at time. Even when I change one back, copy it and sync only the image I choose last would change. If I have to go in and change ever image that happens too, Yikes !!!
Does anyone have any ideas maybe deleting the fish eye profile, if I could find it?
Thanks,
Doug

Yes, if a profile can be found that matches, it will be applied, at 100% for all three sliders.
Conversely, if you for instance don't want your fisheye to be defished, you open an image taken with that lens, move the distortion slider to 0%, and save that as a new default. Now, "Auto" would put the distortion slider at 100% while Default will leave it at 0%.
If you don't make any changes to the standard settings and don't save any new defaults, they are both identical.
Hope this makes sense.

Similar Messages

  • Does anyone have issues with the instrument library?

    I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
    I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
    Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

    Just loaded the 6.0.2 update a few days ago.  I was hoping it would fix the dropping of wifi where the 4g and 3g always kept.  I have restored the router and I have even switched towers through AT&T's help, but to no avail.  I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again.   I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as  being in my home most of the time.  I am planning to take into AT& T store for a new one, just not happy with the wifi situation.  It is sad that this cannot be fixed with an update.  I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those.  I hope At&T and Apple are reading these dialogs.  Please let me know if fixes are on the way!

  • Does any one else have issues with the lack of properly trained reps ?

    I've been a subscriber to verizon services for just under a year now and have been repeatedly disappointed by the " tech support" and " customer service " departments .   I purchased a new droid xt912 (razr) and it worked great for a month or two then started having issues  with random shutdowns and screen possessions icons randomly appearing and disappearing  ringers changing on their own silent mode turning on and off by itself etc..  my inital thought was that it was a dl'd app that was causing the problems so i reset the phone to out of the box status and went for a week with no downloads or apps beyond the pre installed bloatware and started experiencing the same issues . I contacted cust service who then referred me to  the laughable excuse for tech support  who's only advice was reset it when i advised them I'd already done the reset they seem stunned that I being a lowly customer would know how to do that and advised me that there wasn't much else they could do but file and insurance claim  and send me out a refurbished phone of the exact make and model.  I declined after reading multiple reviews about this phone and the multitude of issues it possess  and inquired about the possibility of allowing me to upgrade early and was told no under no circumstances would i be allowed to upgrade to a different phone.   fast forward a couple of months I find out about the activation of the " edge " program and inquired with my local sales rep about the possibility of ditching this ****** razr for a different device and the ill trained and very ill informed rep told me that i qualified for the program no problem and  I started the process  and after almost an hour of my day later was told that no i couldn't use the program  because i was already an active customer and wouldn't be eligible to even apply for it  until my existing contract was expired  at which point it would be really stupid on my part to renew into what is  basically a lease program when i would be due to  upgrade normally anyhow .  I'm happy with the actual service ( when my device works properly ) but am seriously considering changing to a slower network once my contract is done just because of the inferior  service .  I know it seems like i may be whining just a bit but after several months of incompetent help bad answers and outright lies I'm at a loss as to if i may be the only one that has these issues .  So if any one has had similar issues and has had them resolved i would so like to know

    I have accepted that I am stuck with this device as i do not want a direct product replacement I've been to  many of the global community forums and read about the product wide disaster this phone has been.   My issue is more with the seeming disregard for customer loyalty and respect for the consumer  who for lack of a better way of putting it pays the companies bills and employees salaries .  Denying existing customers access to programs such as the " edge" program and the lack of intelligent answers to simple questions is a gigantic slap in the face to the consumer who despite other options has chosen to lock in with verizon. I guess more to the point it seems the company is more interested in obtaining newer customers then maintaining long term repeat customers . maybe i'm a bit archaic in my line of thought but better the reliable source of income then the gamble and it seems Verizon doesn't share that thought

  • Anybody have issues with the iTunes 7.1 update and Logic?

    Scenerio:
    Working happily in Logic Pro. Software Update appears with available updates to iTunes and Quicktime. I needed a break from editing, so I accpeted the update.
    Immediately relaunched Logic Pro and at the Updating the Tree stage my machine freezes, with the following message appearing in four languages:
    "You need to restart you computer. Hold down the Power button for several seconds or press the restart button."
    Chances are overwhelming that this is directly related to the 2 updates, with the iTunes update being the likely culprit, in my opinion
    I repaired permissions which had no effect.
    What should I try next?

    Hi,
    MacFixit has reports from several readers reporting Kernel panics after updating:
    Kernel panics after updating Some users are reporting kernel panics that appear after installing QuickTime 7.1.5.
    MacFixIt reader Ian Soper writes:
    "I had a kernel panic this morning after I installed the itunes and quicktime updates that apple released last night. Last night after installing the updates I shut my machine down and then this morning I powered it up and got a kernel panic (gray screen with various languages telling me how to power down my computer). I don't think there was anything else that I did to my computer last night that could have affected this."
    If you are experiencing similar issues, you may want to investigate some of the solutions listed in our tutorial "Avoiding and eliminating Kernel panics."
    Go to the website and follow the link attached to the text "Avoiding and eliminating Kernel panics."
    http://www.macfixit.com/
    Hope this helps
    ciro

  • I recently upgraded to Yosemite, I now have issues with the length of time it takes to boot up my macbook.

    I have recently upgraded to Yosemite, this took hours and hours......
    Now I have problems with booting/starting my macbook, in that it starts with the apple icon and progress bar this seems to hang about half way and takes forever and a day.
    Anyone else had this, any possible solutions......getting fed up now!!!!

    Forever and a day can be over five minutes  (which I feel is way too long for a year old Mac). 
    Sometimes I restart it (five second press on on/off button) and this enables it to boot up fully, but still too long to boot up.

  • Does anybody have issues with the weather?

    My phones weather app says the sun rises at 1am and sets around noon when clearly it's still night time at 1am and the sun is out at noon...***??!?!

    Hei thanks about the messages. I didn't know about dellfand. I would try if only the system would still be broken.
    somehow it has happened again the same thing that happened the last time (I hope - give me a couple of days to verify the system is stably ok)
    I installed i8kutils and i8kmon, played a bit with the i8kmon.conf settings and then out of desperation removed i8kmon, removed i8kmon from the daemons in rc.conf but left i8k in the modules in rc.conf. Somehow now the fans do not behave like before... they still fan very conservatively (almost at full speed with temperatures of 50 degrees) but it is immeasurably better than the alternating madness I had before.
    I'll keep you updated
    P.S. regarding the bios it might be because I have refreshed the bios with the latest version just after I bought it. Looking at the version number it was quite an update...
    Cippa

  • Does anyone know if there is any difference at all in the display between the 4 and the 4s.  I use my 4 with no problems but have issues with the 5 - makes me feel ill.  Any help appreciated before I make an expensive mistake

    Can anyone tell me if there is any difference at all in the display between the 4 and 4s.  It appears they are the same from the specs but I dont want to make an expensive mistake.  I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.

    In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast.  I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable.  There are no differences however, that are noticeable by the user.

  • Any one have issues with the 10.4.8? Any boot camp gaming issues?

    thanx!

    It's hard to know how many people are having problems based on postings here. But they airport issues may be serious. They made my system nearly unusable, and it's not yet clear that any of the various processes for reinitializing it have worked.

  • Hi, does anyone have issues with the Camera app uploading photos to the photo album? This happens after I downloaded iOS8.1.2

    I have just updated my iPhone iOS to 8.1.2. Since then, the camera is not able to upload photos to the album immediately and some are even lost. Does anyone have the same issue or know how to fix this?

    I found it much easier to have my apps on the last page and let the pre-loaded apps stay where they are on the first couple of pages.  While I'd prefer to have my apps first, at least they are all together.  I found it far too much work to try to move them around another way, plus it shifts some things around in a way that I did not intend.
    BTW, I definitely prefer the Fascinate's arrangement of the icons over the Droid X2, which is always in alphabetical order in a vertical non-stop continuum.

  • Anyone have issues with the most recent iPad updates?

    Since the last iPad update a few days ago, it seemed to have crashed my iPad.  I was told to reset my iPad to original factory settings.  After doing so, I now have no sound to all of my Facebook games.  How do I complain and fix this situation?

    Since the last iPad update a few days ago, it seemed to have crashed my iPad.  I was told to reset my iPad to original factory settings.  After doing so, I now have no sound to all of my Facebook games.  How do I complain and fix this situation?

  • TS1741 Does the new iOS 7 update have issues with the iPhone Remote app? It stopped working on me

    I have tried to restart both my laptop and iPhone. Won't work.

    It just reboots the device and bolds the system fonts.  No harm done.  If you don't like it, undo the setting, it will reboot and back to as it was.

  • Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

    Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
    waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

    Photo Stream only handles images and your videos are not uploaded or shared with other devices.
    Use iPhoto to import from your device. It can bring in the videos and image files.

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • Issue with the Total in BW Report

    Hi,
    We have recently transported the Aggregates in the Production environment. Now we are facing absurd problem.When we are executing the report the Total given by BW is not matching with the exact total of the Values.
    Example:
                          Values (BW Total)    Values (Exact Totals)
    1                      10                            10
    2                     10                            10
    3                     10                             10
    4                     10                             10
    5                    10                             10
    Total Row         53                             50
    All the Characteristics or Nodes are same as before. We have issue with the Key Figure and Calculated Key Figure.
    There is no pattern followed in the variation of the totals.Please help; let me know if you need more information.

    Hi.
    Please check if ll the data is rolled up in the aggregates. Also check the consistency of aggregates from RSRV.
    Hope this helps.
    Thanks,
    Mayuri

  • HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

Maybe you are looking for