Leopard and CS2 Photoshop force quits after clean install

I just bought a mac book pro with Leopard 10.5.6. I did a clean install of my CS2 and all apps work but Photoshop. When I launch the program, it gets to the end and force quits. Any recommendations?
I know I need to upgrade to CS 4 and have no problem with that, but don't want to spend the money yet unless necessary. Can I run Photoshop CS2 on the intel based mac book pro?
Thanks!

loribwith wrote:
When I launch the program, it gets to the end and force quits.
What do you mean by "force quits"? Force quit is when you force an application to quit. Programs don't "force quit" on their own. Do you mean the program crashes? Any error message(s)?

Similar Messages

CPU Overload (-10010) with Logic 9.0.2 and SL 10.6.2 after clean install

Whether using the demo song (Numbers Game), or a new song even with just a couple of instruments (EXS) and a single audio track I get a CPU overload -10010 or -1009 message sometimes every few seconds, sometimes every 30 minutes.
I thought perhaps a conflict with drivers or other software, so I have tried a clean install of SL10.6, updated to 10.6.2, loaded Logic Pro, updated to 9.0.2, and added NO OTHER SOFTWARE AT ALL, and used internal audio, still same problem.
This seems to be a bug in Logic or SL. What can I do?
Message was edited by: ebjornard

This is no bug, your system is telling you that it cannot handle the full load of this song. Try Freezing tracks with heavy CPU-using plugins on them.
Also, check (and bookmark!) these docs:
http://support.apple.com/kb/TA24535?viewlocale=en_US
http://support.apple.com/kb/HT3161
http://support.apple.com/kb/HT2375
and especially:
http://discussions.apple.com/thread.jspa?threadID=2175192&tstart=0

Aperture 3 not processing, and hangs and frozen, unable to click any, and have to force quit. Re install did not help. Help? My gut feeling is that the link to library is corrupted.

I even re-installed the new Aperture 3, and upgraded to the most current version, updated, still having problem. Activity monitor states Aperture not responding.

Okay, let's start with some information:
What are your mac specs? Disk available, RAM etc
How big is your library and where is it located? Is it Managed or Referenced?
Is this new behaviour or have you only just started using Aperture?
Have you repaired or rebuilt the library yet?

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

Leopard and Adobe Photoshop CS2 problems...

I've been reading the posts about Leopard and CS2 problems and have to say that I'm confused. A great many of you have had issues from the very beginning as soon as you upgraded to Leopard. I did not. I use a VERY basic set-up without third party plugins and suspect that to be why I had no problems. At least until now... I looked back through my documents to be sure, and my Photoshop was working beautifully through the first week of January. Somewhere between then and now there had to be an update from Apple that broke Photoshop. I haven't changed any settings since it last worked, and there certainly haven't been any updates from the greedy buggers over at Adobe because they don't support CS2 anymore apparently. What could Apple have updated that might have accidently corrupted my Photoshop?? I don't really feel it could be anything else, but who knows... Does anyone have any ideas? I would hate to have to downgrade to OS 10.4 just to use my Photoshop and I certainly can't afford to shell out the extra $$ for CS3.
I appreciate any light you guys can shed on the topic...
Stan

Actually the 10.5.2 update does seem to have improved things for me with Photoshop CS1. I can now actually type entries into the little boxes for things like crop and brush sizes. The File Browser is still prone to crashing the application though, and there is still some weirdness with opening files by a drag and drop onto the app icon in the Dock. But nothing got worse, and several annoyances disappeared.
One thing to try is to create a brand new admin test user, with no additions (that includes not adding fonts), log into the new account and see if Photoshop will work there.
And speaking of fonts, do you have Linotype's Font Explorer installed? If so, did you get the new updater for it? Some people who use Font Explorer were having a lot of problems after the 10.5.2 update, including Photoshop failure to launch, that were fixed with the Font Explorer update.
Francine
Francine
Schwieder

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion?

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?

No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD?

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what and what is the correct procedure? Rick

To determine if it is, boot into Safe Mode and see what happens. http://support.apple.com/kb/HT1455
In the Activity Monitor, what are the Page Outs and Page Ins?

Photoshop CC Quits After Running Camera Raw Filter

During the past week, Photoshop keeps quitting after I have used the Camera RAW Filter and then pressed OK.
Anyone else experienced this.

I have not, but I guess the generic advice may apply …
Boilerplate-text:
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

PS CS3 Crashes and Won't Force Quit

Using Mac OS X 10.5.2 and latest PS. PS crashes and won't force quit. I have to reboot. Then after opening PS again and barely start editing a file (nothing else is running and I have 4GB ram) PS crashes again.
Also the reset password function on the Adobe site refuses to work and I can't get any support. This is getting really frustrating.

I assume you trashed your preferences? Look in your user Library/Preferences folder and delete your com.adobe.Photoshop.plist file where your preferences are stored. Other than that, I have no clue. Did you try editing different files to see if it could be just that one file giving you problems? I have been using PS CS3 for the past three days, and I have noticed a lot of instability which I didn't have with PS 7. Of course, new machine, new programs, I was expecting a few glitches, but hopefully the dust will settle soon and my workflow will become stable again.

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

Sluggish and Slowness MacBookPro after clean install Mavericks

Hi,
My MacBook Pro 2012 become slow and sluggish after clean install Mavericks. I have to longgg waiting for applications to run ( even my old laptop can run Windows faster!! ). Compare I bought this MBP with Mountain Lion , this one is much slower with Mavericks. There are audible harddrive activity.
I already done with NVAM & SMC reset but still nothing change on performance.
Hope anybody here can help me since a quite a fews days i keep thinking to resolve this matter.
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 2:58:42
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (480.26 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
User Launch Agents:
User Login Items:
          None
Internet Plug-ins:
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          None
Bad Fonts:
          None
Old Applications:
          None
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 17.68 GB
          Destinations:
                    WD My Passport [Local] (Last used)
                    Total size: 465.41 GB
                    Total number of backups: 2
                    Oldest backup: 2014-01-31 14:48:18 +0000
                    Last backup: 2014-02-01 07:31:57 +0000
                    Size of backup disk: Adequate
                              Backup size 465.41 GB > (Disk used 17.68 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               0%          imagent
Top Processes by Memory:
          127 MB          com.apple.IconServicesAgent
          70 MB          mds_stores
          37 MB          mds
          37 MB          WindowServer
          29 MB          Activity Monitor
Virtual Memory Information:
          2.23 GB          Free RAM
          941 MB          Active RAM
          222 MB          Inactive RAM
          644 MB          Wired RAM
          257 MB          Page-ins
          0 B          Page-outs

@mamatcyber @ Linc Davis
Same issue here I have done clean installs using Super Duper (Back-up All Fresh clean slate...)
and still Mavericks is getting slower and slower.....
Using Gimp it now takes 5 mins to export a .jpeg file 500k !
OSX 10.9.1
Processor 2.26ghz
Ram 2gb
250gb HD 196gbfree
Even just now I did a clean install and i'm seeing the spinning beach ball with Firefox, and it's slow to opening up volumes.
This is Ridiculous Apple!

PS elements 12 freezing when doing selective color and having to force quit on Mac.

PS elements 12 freezing when doing selective color and having to force quit on Mac. I've uninstalled and reinstalled several times and that did not work. I've changed preferences and that did not work and i tried hitting shift+command and option at start up of program and that did not fix the problem either.

Hi,
We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
In the meanwhile, you have two options to work around this problem:
1. Option1: Use a mouse instead of the trackpad
2. Option2: Install a plug-in which should workaround the problem
Plug-in installation instructions:
1. Close Photoshop Elements
2. Download this zip file to a location you can easily find (e.g. your desktop)
3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
• For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
• For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
Hope this helps!
Regards,
vaishali

Installed Itunes 8.1 and now it crashes at close and must be force quit.

I just installed Itunes 8.1 on my Mac. I did not realize any issues at first. I can still change cover art, make new playlists but when clicking on the info button (for previously purchased content and in the Itunes Store) the info page opens so big I cannot see the bottom or the top and I cannot close the info page. The only way to get rid of the info page is to close Itunes which crashes and must be force quit.
This is very disappointing. I will not use the info button until a fix is made to this release. I have already seen the posts that you cannot re-install the lower versions.. This was very badly done.

Because I really needed to view the info on new items available in the iTunes Store I experimented with my display settings.
By lowering the display settings to 1280x800
(still could not see bottom of box at that time)
and then raising it back up to 1440x900
I was finally able to see the bottom of the resized box
and now when the box is opened it maintains the new size.
Hopefully next upgrade the box will default to the lowest and not the largest box size on windows and you can resize from there..

I want to delete my mac account and replace it with my gmail account. I know how to do this but when I click and open up mail I get the spinning wheel and have to force quit mail.

I want to disable my mac.com mail, I know how to delete it but I cannot get into mail to do this, whenever I click on mail, or mail in system preferences to open it I get the spinning wheel and have to force quit. I am running a Macbook 10.7.5
Thanks,
Edward.

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

FCP X freezes and must force quit? I have a FCP installed on a Mac Mini (4 gig memory) and Lion OS. The import files are large ACVHD files from a Canon G10 camera. FCPX freezes and requires a force quit. Is anyone else having these problems?

I am using FCP X on both a MacMini (10.7 with 4 Gig memory) and an iMac (10.6 with 4 gig memory). The files are ACVHD files imported from a Canon G10 camcorder. FCP is constantly freezing and requiring a forced quit. Could it be that FCP X was not tested thoroughly for use on a Mac Mini?

I think it's safe to say that FCPX wasn't tested throroughly for use on anything.
with that out of the way, there are many variables as to what might cause your problems, but I don't think it's the mac mini as long as it meets the specified minimum requirements (especially the graphics card).
You might try creating a camera archive first and then importing from that.
The other issue might be the file format itself; you might need to use Clipwrap first. Maybe someone who has the same camera can chime in.

Leopard and CS2 Photoshop force quits after clean install

Similar Messages

Maybe you are looking for