Leopard disk does not ever "id" or "spin up" when I put it in

I can't get the leopard install dvd to id in the drive when I put it in.
I am on a macbook intel core duo with 10.4.11 and superdrive.
To the best of my knowledge I am current on all firmware and software updates....HELP!!!!!!!???????

After resolving the install disk problem, get a bootable, external HD, and make a bootable backup/clone before upgrading/updating and ensure that works like the original. That allows you to revert to the previous good state without having to reinstall anything. See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
As for installation options, see these:
http://discussions.apple.com/thread.jspa?messageID=5757385
http://discussions.apple.com/thread.jspa?messageID=5666369
http://discussions.apple.com/thread.jspa?messageID=5646414

Similar Messages

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Snow Leopard Installer does not recognize Hard drive in disk utility.

    I first at the suggestion of apple technicians because of other problems erased and partitioned hard drive. Now when I go to reinstall Snow Leopard it does not recognize the Macintosh Hard Drive, not even in disk utility. Any help will be greatly appreciate.

    To make sure we understand everything correctly, you are saying that when you start up from the Snow Leopard DVD & run its copy of Disk Utility from the Utilities menu, it shows only the DVD installer disc itself in the list on the left of Disk Utility's window? There is nothing else there?
    Also, what are you booted from when you try to make an image of the installer DVD, the DVD itself or something else? Are you using Disk Utility or something else to make the image?
    This seems very weird for sure. If you were running from some hard disk copy of the OS, I would suspect that its copy of Disk Utility or some OS support file was corrupted, but if you are doing this from the DVD that is extremely unlikely unless the DVD itself is physically damaged.
    Apart from that, pretty much the only thing left is a damaged hard drive or other hardware failure in your Mac.

  • USB Flash Disk does not mount after Leopard Upgrade

    I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
    Before the upgrade to Leopard, the same disk used to work perfectly.
    Can anyone please tell me how I can solve this issue ?
    Thanks.

    vikas wrote:
    I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
    Before the upgrade to Leopard, the same disk used to work perfectly.
    Can anyone please tell me how I can solve this issue ?
    Thanks.
    Check to see if your USB Drive has the latest firmware. Leopard tends not to support older firmware.

  • Mac has snow leopard and does not boot has grey screen

    IMac has snow leopard and does not boot has grey screen

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • The network backup disk does not support the required AFP features.

    I am trying to set up timeMachine on my new mac book pro over a regular home network on a shared network drive. I have tried everything but I keep getting "The network backup disk does not support the required AFP features." I am on lion with the lateset unpdate (10.7.4). I have even tried creating sparebundles on from tutorial that I have found online, but non of the hacks that I have tried seemed to work. Have anyone figured out a way around this? If so, can you share, it will be greatful. I could just buy the time capsule that apple sells but I already have a 2TB internal HDD in an old pc that's hosting my file server so no need for the time capsule hardware. Let me know if there is a way around this thank.

    ookakaa wrote:
    1) Apple time capsule
    Or USB drive connected to a Time Capsule
    2) NAS with the latest firmware
    Not just any NAS.  It has to support the communications protocols used by Time Machine (some involving security, some about error detection and handling).  Some NASs never supported TM; some that worked on Leopard never got updated for Snow Leopard; and some that worked on Snow Leopard still haven't been updated for Lion.
    4) Another networked mac (not a pc)
    A Mac running Leopard 10.5.6 or later.
    Are these the only options?
    Those are the only options supported by Apple.  Some other destinations may work, to some degree, in some circumstances.  Some require "hacks" or other workarounds.  Most are somewhat unreliable, and, may stop working at all on the next OSX upgrade.
    Side note. I've been seeing some online post of how some people are setting up TM on a networked PC drive by setting up a sparsebundle like this site:
    Any thoughts? I have tried some of these examples and it don't seem to work...
    Some of those may have worked at one time, in some circumstances (2 are dated before Lion was released, the other is undated). 
    Wireless backups are tricky enough to a supported destination, with all the security and error detection and handling Apple has been able to employ.   If your backups are important to you, don't trust them to a marginal scheme.
    And, in any event, don't trust your backups to a single piece of hardware or software.  See Time Machine - Frequently Asked Question #27 for an explanation and some suggestions.

  • The startup disk does not have enough space to be partitioned

    I have a custom upgraded Mac Mini (from 1.6 Core Duo to 2.33 Core 2 Duo & 64GB SSD - a fast little machine!) Under Leopard 10.6.6 & could create a BootCamp partition. Now after a reformat & upgrade to 10.6.7, BootCamp reports, "The startup disk does not have enough space to be partitioned". BootCamp says it needs 10 GB free space. The Finder says there is 23.4 GB available.
    Has anyone else run across this?

    Backup. Format. Restore.
    Windows 7 needs 40GB+
    HFS needs 20GB/20% free space to function.
    64GB is fine -- but just one OS, not two. 
    you might squeeze OS X into 30GB if you move and trim a lot.
    Windows 7 SP1 32-bit - the updates take 9GB of space (temp) on top of 20-25GB plus you'll need to disable page, hibernation, not install programs, and leaves little for TRIM and Garbage Collection.
    When Windows gets too low, you can be blocked from login or runnng.

  • HT3275 Time Machine gave me this message after updating to Mountion Lion "The network backup disk does not support the required AFP features."

    After upgrading to Mountain lion, I got this message when it tried to backup to "MybookLive" network disk.
    "The network backup disk does not support the required AFP features."
    What are AFP features and why can I now not back up to my network disk?

    I had a similar issue when I tried to do a network-share backup w Time machine when the share was on a Leopard OSX G5 Power PC.
    I think Time Machine looks for a minimum feature set support from the afp mounted drives so they can be used with Time Machine.
    Western Digital may have to update the firmware on your device to support the new afp features.
    Hope this helps.

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Error: Selected disk does not exist (21) Module-SRE-700

    Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin     
    Keyfile Size 202814577 over limit 32768 will not burn into flash
    ServicesEngine boot-loader> verify                                            
    Loading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    Unrecognized command
    ServicesEngine boot-loader>                                                   
    #service-module sm 1/0 session
    Trying 172.20.245.1, 2067 ... Open
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Trying to reset Service Module SM1/0.
    May  7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    þ
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    ú
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  

    Hi,
    Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
    1. uninstall existing SRE-V software
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
    2. run sm-hw-util to set sata mode to IDE
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
    3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
    ip route 255.255.255.255 SM slot/0
    4. install WAAS:
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

  • "Selected disk does not exist" after install using Unetbootin

    Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
       Booting 'Arch Linux'
    root (hd1,0)
    Error 21: Selected disk does not exist
    Press any key to continue...
    if I press any key, it goes to grub menu again.
    I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
    I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

    Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
    If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
    and post it's output.

  • Disk does not contain a Windows XP-compatible partition

    Hi,
    I've just received my new Mac Pro and I tried to install boot camp, in boot camp assistant everything seems all right, i choose the main this, choose a partition of 31Gb to boot camp it creates well to, as to insert the WINXPSP2 CD, and then restart.
    When I'm on the screen to choose the partition to install winxp, i choose the right one that Boot Camp have created, but then this screen appears.
    "To install Windows XP on the partition you selected, Setup must write some startup files to the following disk:
    238473 MB Disk 0 at Id 1 on Bus 0 on atapi [MBR]
    However, this disk does not contain a Windows xp-compatible partition.
    To continue installing Windows XP, return to the partition selection screen and create a Windows XP-compatible partition on the disk above. If there is no free space on the disk, delete an existing partition, and then create a new one.
    To return to the partition selection screen, press ENTER."
    Any one have any ideas?! I tried to find some info in this forum and google but i didn't find any answers.
    Regards to everyone.
    Marco

    Why not just create a 2nd drive and leave your OS X boot drive well enough alone - makes life easier.
    Format as MBR and one or more partitions as MSDOS and boot from XP again.
    Might want to try erasing your current partition (still MSDOS/FAT) and try again.

  • My iPhone 4 does not allow me to sync wirelessly when plugged into itunes? How do I fix this? I am running leopard on a macbook pro. Could that be the issue?

    I have updated my iphone software to ios5 and everything is working perfectly except for the wireless sync. When I plug my phone into my computer (I'm using a MacBook Pro running leopard) it does not give me the option to check the box in the summary section to sync wirelessly. Can anyone help? Please and thanks

    stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
    Oh. Gosh.  What's Windows got to do with anything? You're on Leopard, on a Mac.
    It seems from other discussions my current OS on my laptop is the reason why it won't sync

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

    Here's the story...
    I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
    I decided to reinstall windows.
    I deleted the windows partition using BootCamp.
    Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned  You must have at least 10 GB of free space available"
    After reading several posts on this forum I decided to defrag the hard drive and try again. 
    The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
    Any suggestions?
    Also, I tried repair disk and repair permissions
    Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)"  Could the 32-bit requirement be an issue? Is lion 64-bit?

    Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

Maybe you are looking for