Leopard does not boot after installing latest Safari update

Hi, please help!
I succesfully (or so I thought...) installed the latest Safari/iTunes/Quicktime update and restarted computer. This first restart worked but Safari wouldn't open, so I restarted again... but this time it didn't work! It just gets into a blue blank screen forever...
Regards,
Fico

I reinstalled OS X...

Similar Messages

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Windows NT does not boot after installing NI-CAN 1.6.0 or security update

We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
Does anyone else have similar experience with this problem?
Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi,
I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
What CAN hardware do you have (PCI, PCMCIA, etc)?.
Let me know this details and I'll try to reproduce the problem.
DiegoF.
National Instruments.

G5 will not restart after installing latest Security Update

I just installed latest Safari Security Update and now my computer will not restart. It will load my background then just spin and spin... with desktop never showing up and no control of computer. I have tried to repair disk but to no avail. HELP!

Hi,
Try Safe Boot Mac OS X
What happens when you try to repair the disk? Are you booting from your restore disk while holding down the C key???
Carolyn
Message was edited by: Carolyn Samit

Mac does not boot after installing bootcamp

hello
installed bootcamp on my mbp with snow leopard today,for the first time mac and windows both started with no problem ,but when i was trying to boot back into the mac again ,it did not boot and just got stuck at the process with turning wheel forever ,showing the apple logo and the turning wheel.
i did try to hold the option button and chose the mac partition ,but again i can not pass thru the turning wheel and apple logo.Does anybody know what the problem is and how can i go beyond this .
thanks.mike

Csound1 wrote:
Have you tried a safe mode boot yet?
Reboot to the OSX partition and hold the shift key down as soon as you hear the chime. You can release the shift when you see the spinning gear wheel.
yes,i did try that too.unfortunately ,hard drive seemed to be the source of the problem.just replaced the hard drive with a brand new one and put this one inside a usb enclosure that i have ,so tomorrow i will get a backup first and then format it again and keep it for the future.
thanks.mike

Windows 7 x64 Professional does not boot after install

Hello.
I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
Following is the event log occurs.
'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
VmName
Win-7_QA-Testing
VmId
5B827557-7009-4D83-AA7C-26A45651EC3A
FailureCategory
<not a known problem>
InstructionByteCount
0
InstructionBytes
Rax
0x10
Rbx
0x80
Rcx
0x0
Rdx
0x80
Rsp
0x200
Rbp
0x6e08
Rsi
0x25da4a
Rdi
0x7da4a
R8
0x0
R9
0x0
R10
0x0
R11
0x0
R12
0x0
R13
0x0
R14
0x0
R15
0x0
Rip
0x9d
Rflags
0x10002
FpControlStatus
7F030000000000000000000000000000
XmmControlStatus
0000000000000000801F0000FFFF0000
Cr0
0x10
Cr2
0x0
Cr3
0x0
Cr4
0x0
Cr8
0x0
Xfem
0x0
Dr0
0x0
Dr1
0x0
Dr2
0x0
Dr3
0x0
Dr6
0xffff0ff0
Dr7
0x400
Es
0002000000000000FFFF000020009300
Cs
00000B0000000000FFFF000000B09F00
Ss
0002000000000000FFFF000020009300
Ds
0002000000000000FFFF000020009300
Fs
0002000000000000FFFF000020009300
Gs
0002000000000000FFFF000020009300
Ldtr
0000000000000000FFFFFFFF00000000
Tr
0000000000000000FFFF000000008B00
Idtr
000000000000FFFF0000000000000000
Gdtr
000000000000270000002B0000000000
Tsc
0x3b48531f8c6
ApicBase
0xfee00900
SysenterCs
0x0
SysenterEip
0x0
SysenterEsp
0x0
PendingInterruption
0x0
Any help will be appreciated.
Thanks

How many vCPU and how much RAM have you given the VM?
Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
Are you using media that has SP1 slip streamed into it?
Have you tried forcing the vm off and then back on again?
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
vCPU = 1
RAM = 2048MB
No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

Ethernet will not connect after installing latest Security Update.

I installed the latest security update, restarted my computer, and found that it now will not connect to the internet. I get the message "Could not find a PPPoE server". I have checked all of my settings, restarted the computer again, turned the modem off and on again, etc., but nothing helps. I know that there is nothing wrong with the modem and server because I am connected through the same DSL modem to this computer (a mac mini). It would seem that the security update has done something unhelpful! Any ideas?
BTW, the ibook does not have a wireless card and I had not installed 2 earlier wireless updates. I only installed this one because it said "recommended for all users".
iBook G4 Mac OS X (10.4.7)

Hello
It seems that the update set your preferences to "use PPPOe" while you where using "TCP/IP".
Go to "System Preferences" and enter the pane whose icon is named "Réseau" in french (maybe "Network" in english.
Reset your settings to "TCP/IP".
Yvan KOENIG (from FRANCE vendredi 22 septembre 2006 08:13:56)

TS3274 iPad does not start after the latest software update

After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Computer won't boot after installing latest iTunes update

Won't boot after the apple screen. Turns black and disk stops Help! Was running Mavericks.

Hi Neodoc,
Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process:         Pages [208]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [93]
Date/Time:       2012-08-22 12:33:15.909 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          102101 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process:         Pages [13521]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [153]
User ID:         501
Date/Time:       2013-03-11 14:57:02.175 -0400
OS Version:      Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Leopard does not boot after installing latest Safari update

Similar Messages

Maybe you are looking for