Level/Generation of members with only one child

Hello!I have a little problem with generations and levels in an outline like this: Dimension Member1 Member1a Member1b Member2 Member2a Member3 Member3a Member3b"Member2" has only the child "Member2a". All other members in generation 2 have more than one member. The function @CURGEN(Dimension) shows for all these members the value 2, but for the member "Member2" it shows generation 3 and level 0. In my opinion "Member2" is generation 2 and level 1.Who is wrong? Essbase? Thanks for your support!Andreas

This is the classic 'implied share' gotcha. When a member has only one child, Essbase by default sets up the child as a shared member to the parent. I believe this was an attempt to save space etc. but it causes problems in @ functions and partitions (and maybe elsewhere!). You need to tag the parent (level 1) member as 'never share'. This should solve it.

Similar Messages

Fastest way to find parents with only one child?

I have two very large tables (both >6 million rows) in an oracle 8i DB. They have a parent child relationship and I would like to construct a query to give me the parents that have only one child......syntactically, what's the best way to construct this query?
I was going to try:
select join_id
FROM parent
where join_id in (select join_id, count(join_id)
FROM child
group by join_id
having count(*)=1)
but then I realized that the subselect has two columns to return and the primary query is only expecting one column, so this will not work.
I suspect there's a quick and dirty way to find out what parents have only one child....
I thought of using rowid's but am not sure this is the best way and in the example below I tried, I'm having problems b/c of functions not being allowed in the where clause.....
select join_id
from child d
where rowid in (select min(rowid)
          FROM child s
          WHERE min(d.rowid)=max(s.rowid)
          AND s.join_id=d.join_id))
Any thoughts?

The two tables are order_header and order_detail. The order_header carries order specific information and the detail contains item specific information.
So if you had ordered three separate products, you would have:
one row in the order_header table (parent)
and three rows in the order_detail table (child)
They are linked by order_number.
I presented the problem this way to make it more accessible to more posters.....;)
One possible solution that I've thought of for my problem is this:
select join_id
from child_table d
where (d.rowid, d.rowid) IN (select min(rowid) MIN_ROW
               ,max(rowid) MAX_ROW
               FROM child_table
               WHERE s.str_order_number=d.str_order_number
               AND s.date>='30-JAN-2005'
               AND s.date<='31-JAN-2005'))
I think this might work because I think that we can safely assume that if the minimum rowid and the maximum rowid (with the same join_id ) are the same then there is only one child record.....is this logic correct?

METAREAD filter with dimension with only one child

Hello !
We have a big problem with our security
Our dimension :
=Dim1
=>Child1
=>Child2
=> Child2.1
=> Child2.1.1
=> INFO - member level 0
=>Child3
We have need to give to all the dim "no_access" except to Child2.1.1
We use meta_read on '@IDESCENDANTS("Child2.1")
The result give "#no_access" to all the dimension because "Child2" have only child
with a retreive we have :
=Dim1 #no_access
=>Child2 #no_access
=> Child2.1 #no_access
=> Child2.1.1 #no_access
=> INFO - member level 0 #no_access
A solution ?
Thanks a lot !!
Regards

Maybe it is an implied share issue which would depend on the property settings on the members, have you tried setting the property of the members to "Never Share".
Cheers
John
http://john-goodwin.blogspot.com/

SQL query to retrieve families with only one generation from a family db

Hi,
I need to write an SQL query that would select families with only one generation ((which means a person - or a married couple - with kids) or (a person - or a married couple - with parents but no kids)) from a database containing families. The simplified db structure is:
person:
id - int, primary key
siblings:
id
parent_id
kid_id
marriage
id:
husband_id
wife_id
Could anyone please help me? I dont really have any idea how to accomplish that...

Hi,
Welcome to the forum!
Assuming that siblings (despite its name) contains only parent-child relationships, and that the parent_id could be either the mother or the father:
WITH     got_tree     AS
     SELECT     CONNECT_BY_ROOT s.parent_id     AS root_id
     ,     LEVEL                     AS lvl
     FROM          siblings     s
     LEFT OUTER JOIN     marriage     m     ON     s.parent_id     IN ( m.husband_id
                                                        , m.wife_id
     START WITH     parent_id     NOT IN     ( SELECT kid_id
                                           FROM        siblings
     CONNECT BY     s.parent_id     IN ( PRIOR m.husband_id
                            , PRIOR m.wife_id
                            , PRIOR kid_id
SELECT       root_id
FROM       got_tree
GROUP BY root_id
HAVING       MAX (lvl)     <= 2
;This will get a list of parents who may or may not have children, but who do not have either parents or grandchildren.
To get their spouses and children (if any) you will have to join this result set to all the other tables. At that point, you can eliminate poeple who do not have ancestors themselves, but are married to people who have more than one generation of ancestors.
The details of how to do that depend on the details of your tables. If you'd like help, then post a little sample data (CREATE TABLE and INSERT statements for all tables) and the results you want from that data.
Edited by: Frank Kulash on Oct 14, 2009 4:05 PM
I'd need sample data in order to test this, of course.

Nodes with Only One Lower-Level Node = Hide

Hi everyone
Have anyone present this situation:
Iu2019ve a quey to report inventory aging. It has two hierarchies to show data. In Rows I have Major Markets and in Columns a date hierarchy to show aging Ex: from 0 to 8 months, 9+ and 13+. Of course here I have also value and volume.
Query reports all values for all major markets fine. When I filter one major market, letu2019s say France also brings detailed figures but when I add any drill down in rows all values goes to cero (0).
Te estrange is that if you swap drill down order with major markets or drill down by columns with the same characteristic figures come out again as usual.
I know this sounds like a SAP note but I have not been able to find it either.
Thanks a lot for your help, and of course points will be assignedu2026..
Ps. Important, this happen when option u201CNodes with Only One Lower-Level Node = Hideu201D (this is selected on purpose because there are some repeated nodes in major market hierarchy Ex. France u2013 France and if there is just one value under first node then means that only display of last one is necessary to avoid repeated values).

Solution we found is to remove flag "Do not display leaves for inner-nodes in the query", directly on the hierarchy.
Thanks

ASO MDX IsLevel weirds result when a parent with only a child

Hi,
I am using the function IsLevel but I find funny results when I apply it with a parent member with only a child.
The result of the function is the level of the child
I am doing it in Essbase 11.1.2.2
Has anyone had the same issue?

Hi Tim,
It is true, it is an implied share issue.
With the parent as never share works.
I don't remember that it happens with BSO, not with the attributes of the members (level, generation, UDA).

Why can I not set a member attribute when there is only one child below the member?

Why can I not set a member attribute when there is only one child below the member?The "member attribute" tab on the properties window of App Manager is grayed out. What am I forgetting?TIA,Craig Wahlmeier

Most likely because Essbase is creating an implicit share relationship between the two members, which is causing the association tab to be grayed out. Tag the parent member with the "Never Share" attribute and see if that fixes the problem.Regards,Jade-----------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

SQL Server 2012 Undetected Deadlock in a table with only one row

We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.
This is our main database, so most of the applications access it.
The day after the migration, when users started to run tasks, the database access started to experiment a total failure.
That is, all processes in the SQL 2k12 database were in lock with each other. This is a commom case of deadlock, but the Database Engine was unable to detect it.
After some research, we found that the applications were trying to access a very simple table with only one row. This table has a number that is restarted every day and is used to number all the transactions made against the system. So, client
applications start a new transaction, get the current number, increment it by one and commit the transaction.
The only solution we found was to kill all user processes in SQL Server every time this situation occurs (no more than 5 minutes when all clients are accessing the database).
No client application was changed in this migration and this process was working very well for the last 10 years.
The problem is that SQL 2k12 is unable to handle this situation compared to SQL 2k.
It seems to occurs with other tables too, but as this is an "entry table" the problem occurs with it first.
I have searched internet and some suggest some workarounds like using table hints to completely lock the table at the begining of the transaction, but it can't be used to other tables.
Does anyone have heard this to be a problem with SQL 2k12? Is there any fixes to make SQL 2k12 as good as SQL 2k?

First off re: "Unfortunatelly, this can't be used in production environment as exclusive table lock would serialize the accesses to tables and there will be other tables that will suffer with this problem."
This is incorrect.
Using a table to generate sequence numbers like this is a bad idea exactly because the access must be serialized. Since you can't switch to a SEQUENCE object, which is the correct solution, the _entire goal_ of this exercise to find a way to properly
serialize access to this table. Using exclusive locking will not be necessary for all the tables; just for the single-row table used for generating sequence values with a cursor.
I converted the sample program to VB.NET:
Public Class Form1
Private mbCancel As Boolean = False
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim soConn As ADODB.Connection
Dim soRst As ADODB.Recordset
Dim sdData As Date
Dim slValue As Long
Dim slDelay As Long
'create database vbtest
'go
' CREATE TABLE [dbo].[ControlNumTest](
' [UltData] [datetime] NOT NULL,
' [UltNum] [int] NOT NULL,
' CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
' [UltData] Asc
' )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 80) ON [PRIMARY]
' ) ON [PRIMARY]
mbCancel = False
Do
' Configure the Connection object
soConn = New ADODB.Connection
With soConn
.ConnectionString = "Provider=SQLNCLI11;Initial Catalog=vbtest;Data Source=localhost;trusted_connection=yes"
.IsolationLevel = ADODB.IsolationLevelEnum.adXactCursorStability
.Mode = ADODB.ConnectModeEnum.adModeReadWrite
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.Open()
End With
' Start a new transaction
Call soConn.BeginTrans()
' Configure the RecordSet object
soRst = New ADODB.Recordset
With soRst
.ActiveConnection = soConn
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.CursorType = ADODB.CursorTypeEnum.adOpenForwardOnly
.LockType = ADODB.LockTypeEnum.adLockPessimistic
.Open("SELECT * FROM dbo.ControlNumTest")
End With
With soRst
sdData = .Fields!UltData.Value ' Read the last Date (LOCK INFO 1: See comments bello
slValue = .Fields!UltNum.Value ' Read the last Number
If sdData <> Date.Now.Date Then ' Date has changed?
sdData = Date.Now.Date
slValue = 1 ' Restart number
End If
.Fields!UltData.Value = sdData ' Update data
.Fields!UltNum.Value = slValue + 1 ' Next number
End With
Call soRst.Update()
Call soRst.Close()
' Ends the transaction
Call soConn.CommitTrans()
Call soConn.Close()
soRst = Nothing
soConn = Nothing
txtUltNum.Text = slValue + 1 ' Display the last number
Application.DoEvents()
slDelay = Int(((Rnd * 250) + 100) / 100) * 100
System.Threading.Thread.Sleep(slDelay)
Loop While mbCancel = False
If mbCancel = True Then
Call MsgBox("The test was canceled")
End If
Exit Sub
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
mbCancel = True
End Sub
End Class
And created the table
CREATE TABLE [dbo].[ControlNumTest](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go insert into ControlNumTest values (cast(getdate()as date),1)
Then ran 3 copies of the program and generated the deadlock:
<deadlock>
<victim-list>
<victimProcess id="processf27b1498" />
</victim-list>
<process-list>
<process id="processf27b1498" taskpriority="0" logused="0" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1970" ownerId="3181" transactionname="implicit_transaction" lasttranstarted="2014-02-14T15:49:31.263" XDES="0xf04da3a8" lockMode="X" schedulerid="4" kpid="9700" status="suspended" spid="51" sbid="0" ecid="0" priority="0" trancount="2" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="21152" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3181" currentdb="35" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" stmtstart="80" sqlhandle="0x020000008376181f3ad0ea908fe9d8593f2e3ced9882f5c90000000000000000000000000000000000000000">
UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
(@Param000004 datetime,@Param000005 int)UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </inputbuf>
</process>
<process id="processf6ac9498" taskpriority="0" logused="10000" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1971" schedulerid="5" kpid="30516" status="suspended" spid="55" sbid="0" ecid="0" priority="0" trancount="1" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="27852" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3182" currentdb="35" lockTimeout="4294967295" clientoption1="671156256" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" sqlhandle="0x020000003c6309232ab0edbe0a7790a816a09c4c5ac6f43c0000000000000000000000000000000000000000">
FETCH API_CURSOR0000000000000001 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
FETCH API_CURSOR0000000000000001 </inputbuf>
</process>
</process-list>
<resource-list>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf6ac9498" mode="S" />
<owner id="processf6ac9498" mode="U" requestType="wait" />
</owner-list>
<waiter-list>
<waiter id="processf27b1498" mode="X" requestType="convert" />
</waiter-list>
</keylock>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="X" requestType="convert" />
</owner-list>
<waiter-list>
<waiter id="processf6ac9498" mode="U" requestType="wait" />
</waiter-list>
</keylock>
</resource-list>
</deadlock>
It's the S lock that comes from the cursor read that's the villian here. U locks are compatible with S locks, so one session gets a U lock and another gets an S lock. But then the session with an S needs a U, and the session with a U needs an
X. Deadlock.
I'm not sure what kind of locks were taken by this cursor code on SQL 2000, but on SQL 2012, this code is absolutely broken and should deadlock.
The right way to fix this code is to add (UPDLOCK,SERIALIZABLE) to the cursor
.Open("SELECT * FROM dbo.ControlNumTest with (updlock,serializable)")
So each session reads the table with a restrictive lock, and you don't mix S, U and X locks in this transaction. This resolves the deadlock, but requires a code change.
I tried several things that didn't require a code, which did not resolve the deadlock;
1) setting ALLOW_ROW_LOCKS=OFF ALLOW_PAGE_LOCKS=OFF
2) SERIALIZABLE isolation level
3) Switching OleDB providers from SQLOLEDB to SQLNCLI11
Then I replaced the table with a view containing a lock hint:
CREATE TABLE [dbo].[ControlNumTest_t](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go
create view ControlNumTest as
select * from ControlNumTest_t with (tablockx)
Which, at least in my limited testing, resovlved the deadlock without any client code change.
David
David http://blogs.msdn.com/b/dbrowne/

Different Effective Date in One BOM with only ONE Change Number

Hi gurus
here is my complete question?
Is it possible to realize this function that Different Effective Date in One BOM for different BOM items with only ONE Change Number?
Thanks for your information/help in advance.

Dear Zhao,
Using One change number it's not possible to define a different valid from date for the BOM changes of a single material BOM.
In case if the same change number is used for making different material's BOM component,then a different valid from date for
each BOM can be defined,but at any given point not for each component/item level of the same BOM.
Check and revert back.
Regards
Mangalraj.S

How can I play different videos with only one MediaPlayer?

I want to play two videos with only one MediaPlayer:
private static MediaPlayerBuilder mpB;
private static Media mLogo;
private static Media mSaludo;
private static MediaPlayer mpLogo;
private static MediaView mvLogo;
private static Group gLogo;
public void start(final Stage stage) {
mLogo = MediaBuilder.create().source(myGetResource(VIDEOLOGO_PATH)).build();
mSaludo = MediaBuilder.create().source(myGetResource(VIDEOSALUDO_PATH)).build();
mpB = MediaPlayerBuilder.create();
mpLogo = mpB.media(mLogo).build();
mvLogo = MediaViewBuilder.create().mediaPlayer(mpLogo).build();
gLogo.getChildren().add(mvLogo);
sActual = new Scene(gPozos, WIDTH, HEIGHT, Color.BLACK);
stage.setScene(sActual);
stage.show();When I want to play mLogo:
sActual.setRoot(gLogo);
mpLogo.play();Then, when I want to play mSaludo I do this:
mpLogo = mpB.media(mSaludo).build();
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo).applyTo(mpLogo);
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo);
sActual.setRoot(gLogo);
mpLogo.play();But is impossible to change the Media. It doesn't work. Sometimes I play mLogo video and sometimes (depends on the code) the video mLogo doesn't start and I see an image of the first keyframe and nothing else. I have no exceptions, no errors, nothing.
I want to play mLogo and then mSaludo. How can I do this?
Thanks
Noelia

Ok, I understand, if I have 100 videos I have to build 100 MediaPlayers but only one MediaView.
Here I post my code with only two videos, I included all the asynchronous errors.
package pruebafx;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import javafx.application.Application;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.media.Media;
import javafx.scene.media.MediaErrorEvent;
import javafx.scene.media.MediaPlayer;
import javafx.scene.media.MediaView;
import javafx.stage.Stage;
* @author Solange
public class PruebaFX extends Application {
    private static final Logger logger = Logger.getLogger("pruebafx.pruebafx");
    private static final String MEDIA_PATH = "/images/";
    private static final String VIDEOLOGO_PATH = MEDIA_PATH + "logo.flv";
    private static final String VIDEOSALUDO_PATH = MEDIA_PATH + "saludo.flv";
    private static Group root;
    private static Scene scene;
    private static MediaPlayer mpLogo;
    private static MediaPlayer mpSaludo;
    private static Media mLogo;
    private static Media mSaludo;
    private static MediaView mediaView;
     * @param args the command line arguments
    public static void main(String[] args) {
        Application.launch(args);
    @Override
    public void start(Stage primaryStage) {
        try {
            FileHandler fh = new FileHandler("DisplayManagerlog-%u-%g.txt", 100000, 100, true);
            // Send logger output to our FileHandler.
            logger.addHandler(fh);
            // Request that every detail gets logged.
            logger.setLevel(Level.ALL);
            // Log a simple INFO message.
            logger.info("Starting PruebaFX");
        } catch (Exception e) {
            System.out.println(e.getMessage());
        primaryStage.setTitle("Change Videos");
        root = new Group();
        mLogo = new Media(myGetResource(VIDEOLOGO_PATH));
        mSaludo = new Media(myGetResource(VIDEOSALUDO_PATH));
        mpLogo = new MediaPlayer(mLogo);
        mpSaludo = new MediaPlayer(mSaludo);
        mediaView = new MediaView(mpLogo);
        mpLogo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpLogo.stop();
                mediaView.setMediaPlayer(mpSaludo);
                mpSaludo.play();
        mpSaludo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpSaludo.stop();
                mediaView.setMediaPlayer(mpLogo);
                mpLogo.play();
        mLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mLogo");
        mSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mSaludo");
        mpLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpLogo");
        mpSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpSaludo");
        mediaView.setOnError(new EventHandler<MediaErrorEvent>() {
            public void handle(MediaErrorEvent t) {
                logger.severe("Error en MediaView mediaView");
                logger.severe(t.getMediaError().getMessage());
        root.getChildren().addAll(mediaView);
        scene = new Scene(root, 300, 250);
        primaryStage.setScene(scene);
        primaryStage.show();
        mpLogo.play();
    public String myGetResource(String path) {
        return (this.getClass().getResource(path).toString());
}My video saludo.flv hangs up.
Here is the content of the log file:
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<!DOCTYPE log SYSTEM "logger.dtd">
<log>
<record>
<date>2011-12-12T12:03:53</date>
<millis>1323702233578</millis>
<sequence>0</sequence>
<logger>pruebafx.pruebafx</logger>
<level>INFO</level>
<class>pruebafx.PruebaFX</class>
<method>start</method>
<thread>12</thread>
*<message>Starting PruebaFX</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>1</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$6</class>
<method>run</method>
<thread>12</thread>
*<message>Error en MediaPlayer mpSaludo</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>2</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$4</class>
<method>run</method>
<thread>12</thread>
*<message>Error en Media mSaludo</message>*
</record>
</log>
Do you know when will be available the 2.0.2 version???
I have to finish my application!!!
Thanks.
Noelia

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

How to connect many devices with only one FW800 port in iMac?

Hi,
I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
(1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
(2) Connect the d2 Quadras to one port of the FW800 hub
(3) Get a FW 800 to FW 400 cable
(4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
Will

In addition to your listed considerations, you should consider the following.
Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

HT4527 an iphone can be synced with only one itunes library at a time error on same pc

an iphone can be synced with only one itunes library at a time error on same pc why?

Damaged library... See Empty/corrupt library after upgrade/crash.
tt2

Level/Generation of members with only one child

Similar Messages

Maybe you are looking for