Licence issues when updating?

I recently installed an update to adobe elements 13, when I restarted to computer I only had the trial version. When i tried to enter the activation code it informs me that I have exceeded to number of licences. how do I get around this and avoid it in future?
thanks

You will need to contact Adobe support thru chat and ask them to reset your activations. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
You are allotted two current activations per single user license - you can deactivate and reactivate as needed, but you have to remember that you only have two to work with.. If you have installed more than twice without deactivating you will get the notice you indicate you saw. To avoid it in the future you need to remember to deactivate before you uninstall/reinstall, if you are able to that is. When a system fails you might not have that opportunity. But if you are knowingly disabling/uninstalling Adobe software then be sure to deactivate it first. To deactivate you normally just have to open a program and choose Help -> Deactivate.
If you did not uninstall/reinstall in this then I cannot explain why you got the message you did.

Similar Messages

Indesign 5.5 crash issues when updating links

I am having crash issues when updating links and I don’t know how to trouble shoot the issues.
I have adobe creative suite 5.5 and I am using a third party plug in called wordsflow to allow updating of MS word documents without losing formatting in Indesign.
I have been in contact with the plug creator and they seem to think that the way the indesign importer is handling images is causing the problem.
I am not a particularly experienced Indesign user. How do I go about working out what the issue is?

At first it does appear that the plug in is the problem, however i suspect that the builders of the plugin are correct, in that it is the way in design in handling images in links.
the problem is worse when any image in anchored any where with in the document.
when the updating links screen pops up, the point where it freezes and then indesign crashes is infact on a linked image file consistantly.
broswing other indesign link issues it appears i am not the only person with image link problems.
My question is aside form turning off the plug in, what else can i do to search for the potential issue?

Crm plugin issue when updating parent account field in account.

Hi ,
In my CRM Application ( CRM 2011) we have accounts and contacts. when account parent account is updated their contacts owner id will be updated in crm db server and external server using notification service which is called by pulgin.
so in one of my account has 6000+ contacts ,when updating accounts parent account id from crm , screen disabled and after 4 to 6 mins sql error message screen displayed.
below is the eventviewer log ,
The Web Service plug-in failed in OrganizationId: 457b2390-e086-485f-9b05-
094f6410abef;
SdkMessageProcessingStepId: 63cdbb1b-ea3e-db11-86a7-000a3a5473e8; EntityName: account; Stage: 30;
MessageName: Update; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel,
Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35;
ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin;
Exception: Unhandled Exception: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
   at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
   at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
If i debug the account update code plugin it seems to be working fine (means updated parent account id and contacts ). if i remove debugger and hit on save from crm , throws error.
this is high priority issues , im struggling from past 3 days could get any solution.
if any one helps really appreciated.

First.
If you use plugin for send information to any external system you create small intergation.
For integration use must create async plugin. On your trace ( account; Stage: 30;) you use sync plugin.
Second
For increment CRM timeout add reg key OLEDBTimeout.
about this key you can read from microsoft
support
good luck

EF ProviderManifestToken issue when updating ODAC Beta 3 to final release

Hi everybody,
We're using ODAC (connecting to a Oracle 9i) with VS2010, developing with .NET Framework 4 using Entity Framework. We started our developments using ODAC Beta 1, and we have been updating the ODAC every time that a new Beta was released and everything was going like expected, but we're having trouble with the last update, from ODAC Beta 3 to the final release (11.2.0.3). Note that we have only one ODAC installed at the time, for every update we first uninstall the old release, then we install the new ones and finally we update the application references to the new Oracle.DataAccess.dll.
The first error occurred when the application attempt to access the DB, the message we got was: "+ProviderManifestToken no es válido+" ("*ProviderManifestToken is not valid*") .
We tried updating the model (EDMX) from the database (the only change made was an update in the EDMX SSDL content from ProviderManifestToken="9i" to ProviderManifestToken="9.2"), then another error came out: "+El esquema especificado no es válido. Errores: Modelo.ssdl (2,93) : error 0169: Los artefactos SSDL deben tener como destino el mismo proveedor. ProviderManifestToken '9i' es diferente de '9.2' que se encontró antes.+" (something like "*The specified schema is not valid. All SSDL artifacts must target the same provider. The ProviderManifestToken '9i' is different from '9.2' that was encountered earlier.*"). We did some research about this error, but couldn’t find any solution... does anyone know how the update from Beta 3 to Final Release should be done? are we missing any configuration?
Thanks in advance!
Lucas

ODAC Beta 3 (11.2.0.2.50) starts to use two most-significant digits of an Oracle database version number for ProviderManifestToken.
You have no problem with ODAC Beta 3 by modifying '9i' to '9.2' for ProviderManifestToken. But when updating ODAC Beta 3 to final release (11.2.0.3) and doing the same modifications, the said "another error" occurs. That seems to indicate the issue is not about ProviderManifestToken itself.
I am wondering if there are different store schemas in your edmx file and the error is caused by schema filtering.
For example, having differnet store schemas for the Schema= like below.
<EntitySet Name="Categories" EntityType="Model.Store.Categories" store:Type="Tables" Schema="USER1" />
<EntitySet Name="Customers" EntityType="Model.Store.Customers" store:Type="Tables" Schema="USER2" />
Can you please check it?
Another question is: Can you regenerate the edmx file using the final release (11.2.0.3)?
This is the preferable way.
Edited by: shsu on Mar 1, 2012 12:32 PM

Space issues when updating Infinity Blade

Hey all,
I've got Infinity Blade, and it's a big app (891MB). When I go to update it, the Infinity Blade icon had a blue bar fill up until it gets to "Installing" then it says it can't do it, I don't have enough space. Now I've got 1.3 GB of space left on my iPad, so even if it was downloading a full new copy there should be enough space left. What's the deal here?
Any input appreciated, Thanks,
Dan Perkins

That's a shame... I often run into the issue when I'm at work and (being impatient) I really want to update and app now. Unfortunately, I've got the 16gb and it's almost ALL apps taking up the space, as opposed to videos. So I can't delete apps and reinstall because I'll lose their data. And I have very little music. I do have a fair bit of family pics but I'd have to go through and delete a bunch 1 by 1.
Maybe it is time that I start letting go of some of these apps that are cool but I'm REALLY not ever going to use them / play them again
Thanks for the input.
dp

Dhcpcd issues when updating my pacman

I have read the wiki, and know that we could get the issues with filesystem. However I can't get this to work correctly when doing pacman -Syu. Using the issue with the dhcpcd I tried to look for similar packages that own those files.
dhcpcd: /usr/bin/dhcpcd exists in filesystem
dhcpcd: /usr/lib/dhcpcd/dhcpcd-run-hooks exists in filesystem
dhcpcd: /usr/lib/systemd/system/dhcpcd.service exists in filesystem
dhcpcd: /usr/lib/systemd/system/[email protected] exists in filesystem
dhcpcd: /usr/share/licenses/dhcpcd/LICENSE exists in filesystem
dhcpcd: /usr/share/man/man5/dhcpcd.conf.5.gz exists in filesystem
dhcpcd: /usr/share/man/man8/dhcpcd-run-hooks.8.gz exists in filesystem
dhcpcd: /usr/share/man/man8/dhcpcd.8.gz exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by Jzarecta (2015-06-16 11:34:13)

Jzarecta wrote:Thats where I am stuck since the wiki doesnt address anything further.
Sure it does, the fourth sentence from the link I gave:
wiki wrote:If the file is not owned by another package, rename the file which 'exists in filesystem' and re-issue the update command. If all goes well, the file may then be removed.
As for others experiencing this - no, that is not the case. Something has gone wrong on your system. Either you installed dhcpcd manually circumventing pacman, or your package database was corrupted.

Issue when updating a trigger

I have a trigger that is supposed to insert when a button is pressed and update when a different button is pressed. When inserting, everything works but when updating, UPDATED_ON and UPDATED_BY is put in the database but VOIDED_BY,VOIDED_ON,ARCHIVED_BY,ARCHIVED_ON are not. I am not sure what i need to do in order to fix this. Can anyone help me out here? Thanks
Deanna
create or replace trigger "CHART_BEFINSUPD"
BEFORE
insert or update or delete on "CHART"
for each row
DECLARE
v_VOIDED_ON number;
v_UPDATED_ON number;
v_ARCHIVED_ON number;
begin
--v_voided_on :=0;
--v_updated_on :=0;
--v_archived_on :=0;
IF INSERTING AND :NEW.RECNUM IS NULL THEN
SELECT CHART_SEQ.NEXTVAL INTO :NEW.RECNUM FROM DUAL;
END IF;
IF INSERTING THEN
:NEW.CREATED_BY := NVL(V('APP_USER'),USER);
:NEW.CREATED_ON := SYSDATE;
:NEW.STARTED_ON := SYSDATE;
:NEW.STARTED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_ON := SYSDATE;
END IF;
if UPDATING THEN
:NEW.UPDATED_BY := NVL(V('APP_USER'),USER);
:NEW.UPDATED_ON := SYSDATE;
END IF;
if VOIDED='Y' THEN
:NEW.VOIDED_BY := NVL(V('APP_USER'),USER);
:NEW.VOIDED_ON := SYSDATE;
else
:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
:NEW.ARCHIVED_ON := SYSDATE;
END IF;
end;

ok, I decided to take out of the trigger the code about archiving, since that is the part that seems to be giving me the most trouble. The rest of the trigger now works.
So could i just write a procedure for just the archiving part? And if so how would that be done so that the procedure would run on a click of a button?
create or replace trigger "CHART_BEFINSUPD"
BEFORE
insert or update or delete on "CHART"
for each row
begin
IF INSERTING AND :NEW.RECNUM IS NULL THEN
SELECT CHART_SEQ.NEXTVAL INTO :NEW.RECNUM FROM DUAL;
END IF;
IF INSERTING THEN
:NEW.CREATED_BY := NVL(V('APP_USER'),USER);
:NEW.CREATED_ON := SYSDATE;
:NEW.STARTED_ON := SYSDATE;
:NEW.STARTED_BY := NVL(V('APP_USER'),USER);
END IF;
if UPDATING THEN
:NEW.UPDATED_BY := NVL(V('APP_USER'),USER);
:NEW.UPDATED_ON := SYSDATE;
END IF;
if updating and :new.voided='Y' then
:NEW.VOIDED_BY := NVL(V('APP_USER'),USER);
:NEW.VOIDED_ON := SYSDATE;
END IF;
--IF UPDATING AND :new.ARCHIVED_BY IS not NULL THEN
--:new.ARCHIVE :='Y';
--:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_ON := SYSDATE;
--end if;
--if updating and :new.archived_by is null then
--:new.archive :='N';
--if v_archive > 0 then
--:new.archived_by := null;
--:new.archived_on := null;
--end if;
--end if;
END;Edited by: Dclipse03 on Oct 7, 2009 6:57 AM

Startroutine issue when updating transactional DSO from parallel process

Hi
I have the following issue.
In a start routine i do some processing of data. In some cases errors missing master data creates a potiential error but does not stop the processing. What i want to achieve is the following.
I have created a transactional DSO where i want to update information about the records where issues is found in processing. I use a standard ABAP modify statement to update the DSO. This works fine when i run the DTP in 1 batch process but i get errors when i run the DTP in parallel. The problem is related to the database locking of the DSO table. I have tried to play around with ENQUEUE but cant get it right.
Any input to get this to work in parallel would be appreciated.
/Chris

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Software licence issues when upgrading to Leopard with a new machine

Hi,
This is a question about my licence for Logic, but also on a broader scale, all my plugins and AU instruments etc. of which I have bought many.
I want to upgrade to Leopard (currently on Tiger 10.4.11), and realise that it's going to be a long and painful process to re-install each program/plugin etc. as I want to start from a clean Leopard install.
I also want to do this on a new MacBook Pro, but am wondering what kind of complications I'm going to run into when doing so. I can't just close one machine down while I transfer across the programs as I need it to work with, so I was going to prepare an external FW (or USB?) hard drive with Leopard, configure it and install all I need, and then clone that to my new MBP once I've got the money together to buy it.
Will this void the licence for Logic (and all my other programs) considering I'll essentially have two different machines with the same software? Is there an easier way to do this (particularly without installing each program again)?
Thanks
osu
Message was edited by: onesizeup

You can run Logic on two different machines; just not at the same time. So there are no logistical (ha ha) problems from that point of view.
As regards the more general issue of copying over data…
There are applications such as Carbon Copy Cloner (shareware) which can make exact copies of your volumes, & there is Migration Assistant (part of OS X) that will allow you to move over the bits you need.
But if you are going for a clean install, you might prefer to do everything the hard way & re-install everything.
Personally, what I usually do is first a clean install, & then use my carefully-prepared back-ups to put everything from their previous locations directly into the corresponding locations in the new system. But this isn't recommended unless you really know what you're doing!
However, it does work perfectly for most things, as long as you take a few precautions & do everything in exactly the right order.
You can search in other Forums for lots of good advice on this type of move-over.

Windows Vista Network Issues when updating Podcasts

Hi there,
Since upgrading to VISTA i am experiencing countless problems with my internet connection when using iTunes. Using iTunes normally does not cause a problem however as soon as iTunes store downloads updated podcasts, my network connection disconnects. The podcasts only download partially and then fail as a result of my network issues. I am unable to repair my wireless network connection at this point and it appears that my wireless card disables completely. I have to reboot to resolve the issue.
Has anyone else experienced this? I am using the latest version of iTunes.
Are there any fixes?
Many thanks,

Try turning off firewalls, pop-up blockers, software accelerators, and security software.
Can you connect with everything temporarily turned off?

Issues when updating 3GS to iOS 4.3

Hi,
My wife has a 3GS and has been trying for days to update to the latest version of iOS (4.3), always having an issue at the end.
First iTunes gave the message about the software upgrade, so she clicked download and install. After some time, she got an error message (Error 3259), so it seemed that the file was not being downloaded properly.
After several tries, she downloaded some software to repair the error, and it seems it worked. Also as a second alternative she downloaded manually the iOS file.
Now the problem is that she connects the 3GS to the computer, iTunes detects it, does the backup / sync and then proceeds to install the iOS upgrade, taking more than 10 minutes, and when it seems to have finished the process she gets a message saying that the connection between the laptop and the iphone was lost, and the software was not installed. We have tried a few times always having the same error at the end.
She is using a Dell computer with Windows XP and the latest version of iTunes.
Any help will be highly appreciated.
Regards
Jose

Hi Wjosten,
Thanks for your suggestion. I did as you suggested and it partially worked.
I had to update to the latest version of iTunes. Then I disabled all security software and tried to update the iphone. It seemed to work but agained it failed. Now I get an error 1604, and need to restore the iphone. I restarted the computer, tried again, and got the same error again.
Now, not only I cannot update the iphone, but also have to deal with the fact that I need to restore, and it's not working.
Now I am going through the process of checking the USB settings, restarting (again) the computer and trying all over again.
Any ideas or suggestions will be more than welcome.
Regards
Jose

Issue when updating Creative Cloud Desktop

When I try to update the Creative Cloud Desktop I get the following message:
"We've encountered the following issues: Creative Cloud desktop failed to install"
What do I need to do?

Hi,
I'm having the same problem but haven't found anything that solves it on the existing posts.
I've just bought a brand new Macbook Pro 15" and transferred ALL my data from my old Macbook Pro 17" using my Time Machine. Both Macs are running Mavericks but Illustrator doesn't function properly. Obviously I need to use Crative Cloud Desktop to reinstall Illustrator but every time I attempt to install I get the same message... "We've encountered the following issues: Creative Cloud desktop failed to install". Oh and I have a Creative Team subscription.
Please don't just point me in the direction of the other threads on here. I've either tried them or don;t follow them because what they describe doesn't appear at my end.
Cheers
Simon

Having issues when updating products

Hey Guys,
The following error occurs when I try to update Adobe Products:
Flash Pro CS6 update 2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Photoshop 13.0.1.1
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Bridge CS6 5.0.1.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Media Encoder CS6 6.0.3 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Robert Beauchamp

see if these give you further help:
http://adobe.hosted.jivesoftware.com/message/4518817
http://forums.adobe.com/message/5048225

Password change issue when updating user data in SAP ABAP system

Hi Guru's,
One of my reconciliation tasks part of the reconciliation job I've created is doing some strange password updates.
As you can see below the task selects all users part of my identity store that are part of the account attribute of the particular ABAP system.
Once these users are selected the task updates different data like username, validto, ... but the task is updating a lot of other things that are not part of the destination tab. What is causing the biggest issue is the password fields that are updated in the ABAP system like, password, productive password, ...
Can you please advise if I missed something and how to solve?
Thanks a lot,
Laurent

Hello Steffi,
Yes in the ABAP systems they have the same timestamp. No other jobs are running at the same time.
It is only happening to a few users depending on the ABAP system. On some ABAP systems there are only a few users for which the PW is reset and other systems 300.
Example below of a system where I updated all user. In my pass only the following attributes should have been pushed thru to the ABAP system.
However the valid from, accounting number and password have been updated as well.
Thx,
Laurent

What was biggest issue when updating from Logic 6 to Logic 7?

I'm switching this week by purchasing update (Logic 6 to 7). Was everything seamless? Will all my Sampletank plugs work fine? Will I have to re-authorize all non logic plug-ins (sampletank, Soundsoap, etc). Do garageband instruments and loops transfer auomatically? Will all current Logic preferences carry over to Logic 7? Please tell experiences on actual update. How does XS key get updated?

hi dale, yes everybody's had issues - we're just too bored and tired with the whole buggy mess to respond. just read some of the messages by rohan, armag.,ishwartz and stash to get the picture.
if it works great already, keep it going and add the upgrades cautiously.
stick the new stuff on its own drive and thrash it, day in day out, until you trust it. don't leave yourself without a back door (os9 is mine).
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

Licence issues when updating?

Similar Messages

Maybe you are looking for