Password change issue when updating user data in SAP ABAP system

Hi Guru's,
One of my reconciliation tasks part of the reconciliation job I've created is doing some strange password updates.
As you can see below the task selects all users part of my identity store that are part of the account attribute of the particular ABAP system.
Once these users are selected the task updates different data like username, validto, ... but the task is updating a lot of other things that are not part of the destination tab. What is causing the biggest issue is the password fields that are updated in the ABAP system like, password, productive password, ...
Can you please advise if I missed something and how to solve?
Thanks a lot,
Laurent

Hello Steffi,
Yes in the ABAP systems they have the same timestamp. No other jobs are running at the same time.
It is only happening to a few users depending on the ABAP system. On some ABAP systems there are only a few users for which the PW is reset and other systems 300.
Example below of a system where I updated all user. In my pass only the following attributes should have been pushed thru to the ABAP system.
However the valid from, accounting number and password have been updated as well.
Thx,
Laurent

Similar Messages

Password change issue when logging on to Portal NW2004s SP6

Hello,
We have a NW2004s SP6 installation. We have the user management in the ABAP stack.
We create new users is created in the ABAP stack.
When the user logs on using the Portal, the change old password screen keeps repeating itself. This is however not the case once the user has logged on to the ABAP server and changed his password.
So, I looked in the logs. The log is full of the message.
Error#1#/System/Database/sql/connect#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should...
[EXCEPTION]
{2}#3#com.sap.sql.log.OpenSQLException#Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should..#com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "\\labnxi\sapmnt\NXD\SYS\global\security\data\SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:112)
     at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:320)
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:186)
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
     at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:89)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleDbImpl.getScheduleToProcess(ScheduleDbImpl.java:2026)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleService.getScheduleToProcess(ScheduleService.java:373)
I looked in the server and the SecStore.properties is there in the directory
usr\sap\NXD\SYS\global\security\data.
If anybody could shed some light onto this issue that would be much appreciated.
Best Wishes.
Sumit.

Hi,
on the server where your portal runs you have a user calles <SID>adm, where <SID> stands for the three-letter name of your system.
This user needs read/write rights on the SecStore files...
Hth,
Michael

Password inconsistancy issue with RFC users in ECC 6.0 System after upgrade

Hi,
We have upgraded the system from 4.7 to ECC 6.0, but facing the password inconsistancy problem for RFC users. We have set the parameters like "login/min_password_lng" as "8" and "login/password_downwards_compatibility" as "3" & RFC user Type is "system". Could you please suggest how to resolve the password inconsistancy issue.

Hi Chandan,
you need to run the txn. SECSTORE and there it will shows you all the RFCs that have inconsistent passwords. Please maintain the correct passwords there.
In case the existing passwords are no longer acceptable due to new security policies as per the new SAP version, you will have to change the password from SU01.
Regards,
Shitij

EFS, password change denies access to encrypted data

Hi,
Has anyone had the issue with admin changing users password in Console One
resulting in users not being able to access their encrypted data.
Laptop users are using EFS to encrypt their data.
These users have WinXPPro SP2 and we are running ZfD 6.5SP2.
I have found IR 1 for ZfD 6.5 SP2 which includes TID3003874 "Personal IE
certificates and EFS stop working after password change" however this does
not fix the issue.
Could someone explain in more detail what this fix does as I may have
misunderstood what this fix is.
Regards,
Eric.

I know this is an old thread, but I thought it would be best to those who
found it realized that the best method for addressing this issue may be
found here:
http://www.novell.com/support/viewCo...rnalId=3724689
However the MS article could still be useful for some.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"ghoskins" <[email protected]> wrote in message
news:[email protected]..
>
> I'm having the same problem. I ran acrosss this Microsoft KB and it
> seems to fix the issue. I'm not certain this is the best security
> practices, but it does work.
>
> 'User cannot gain access to certificate functionality after password
> change or when using a roaming profile'
> (http://support.microsoft.com/default...b;en-us;331333)
>
>
> --
> ghoskins
> ------------------------------------------------------------------------
> ghoskins's Profile: http://forums.novell.com/member.php?userid=12306
> View this thread: http://forums.novell.com/showthread.php?t=215857
>

Indesign 5.5 crash issues when updating links

I am having crash issues when updating links and I don’t know how to trouble shoot the issues.
I have adobe creative suite 5.5 and I am using a third party plug in called wordsflow to allow updating of MS word documents without losing formatting in Indesign.
I have been in contact with the plug creator and they seem to think that the way the indesign importer is handling images is causing the problem.
I am not a particularly experienced Indesign user. How do I go about working out what the issue is?

At first it does appear that the plug in is the problem, however i suspect that the builders of the plugin are correct, in that it is the way in design in handling images in links.
the problem is worse when any image in anchored any where with in the document.
when the updating links screen pops up, the point where it freezes and then indesign crashes is infact on a linked image file consistantly.
broswing other indesign link issues it appears i am not the only person with image link problems.
My question is aside form turning off the plug in, what else can i do to search for the potential issue?

Can be changed Maxium length of user ID on SAP ERP

Hi, experts.
Now, I work project of global single instance SAP ERP.
A few days ago, I have received request from my client how can change maxium ID length of SAP ERP.
As I know, maxium length of SAP ERP's user ID is fixed 12 and it can be seen 'BNAME' field of 'usr02' table using se11 transaction code.
But our client want that each person's full name is used SAP ERP's id. therefore I search for credentials this cases globally.
If anybody knows this case, please reply me.
Thanks and regards.

This snippet of text from the link is very important:
Caution
If you connect to other systems, you should be sure the security policies you define here, are in harmony with the other system. For example, if you define one password length here, but the users are restricted to shorter password lengths in the back-end system, it can lead to logon problems. If you use the user management of an ABAP system as the data source, these settings do not always apply.
I do not think you can exceed these 12 characters in an ABAP system.

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
      How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
     initialize="initApp()">
     <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
     <mx:TextInput x="108" y="21" id="txtAirline"/>
     <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
     <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
     </mx:DataGrid>
       <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.rpc.AbstractOperation;
               import mx.rpc.events.FaultEvent;
               import mx.rpc.soap.LoadEvent;
               import mx.rpc.events.ResultEvent;
               import mx.rpc.soap.WebService;
               [Bindable] public var flightData:ArrayCollection;
    private var flightWS:WebService;
     private function initApp():void{
          flightWS = new WebService();
          flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
        flightWS.addEventListener(FaultEvent.FAULT,onWSError);
          flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
         flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
          flightWS.loadWSDL();
private function getData():void{
          var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
          var input:Object = new Object();
          input.Airline = txtAirline.text.toUpperCase();
          operation.arguments = input;
          operation.send();
     private function onWSError (event:FaultEvent):void{
     private function onWSDLLoaded(event:LoadEvent):void{
          btnGetData.enabled = true;
     private function onFlightWSGotResult(event:ResultEvent):void{
          flightData = event.result.SFLIGHT;
          ]]>
     </mx:Script>
</mx:Application>
Regards,
Vinoth

Domain Controller password changing issues

Hello!
Having a strange issue where certain users cannot change their password once they expire and it will just prompt that the password does not meet the complexity requirements (when it does).
Also there seems to be a higher than usual amount of call regarding AD account that have become locked.
We have multiple DC's at different main sites, we have a mix of 2003 and 2012 DC's so I'm thinking this could be a Kerberos issues between the 2003 & 2012 ? We are currently in the process of migrating systems off the 2003 and point them at the 2012 but we have a lot and it will take some time.
The event logs don't show anything obviously and also DC DIAG on the 2012 servers comes back as being healthy.
Many Thanks for any suggestions!
This topic first appeared in the Spiceworks Community

Hello!
Having a strange issue where certain users cannot change their password once they expire and it will just prompt that the password does not meet the complexity requirements (when it does).
Also there seems to be a higher than usual amount of call regarding AD account that have become locked.
We have multiple DC's at different main sites, we have a mix of 2003 and 2012 DC's so I'm thinking this could be a Kerberos issues between the 2003 & 2012 ? We are currently in the process of migrating systems off the 2003 and point them at the 2012 but we have a lot and it will take some time.
The event logs don't show anything obviously and also DC DIAG on the 2012 servers comes back as being healthy.
Many Thanks for any suggestions!
This topic first appeared in the Spiceworks Community

EF ProviderManifestToken issue when updating ODAC Beta 3 to final release

Hi everybody,
We're using ODAC (connecting to a Oracle 9i) with VS2010, developing with .NET Framework 4 using Entity Framework. We started our developments using ODAC Beta 1, and we have been updating the ODAC every time that a new Beta was released and everything was going like expected, but we're having trouble with the last update, from ODAC Beta 3 to the final release (11.2.0.3). Note that we have only one ODAC installed at the time, for every update we first uninstall the old release, then we install the new ones and finally we update the application references to the new Oracle.DataAccess.dll.
The first error occurred when the application attempt to access the DB, the message we got was: "+ProviderManifestToken no es válido+" ("*ProviderManifestToken is not valid*") .
We tried updating the model (EDMX) from the database (the only change made was an update in the EDMX SSDL content from ProviderManifestToken="9i" to ProviderManifestToken="9.2"), then another error came out: "+El esquema especificado no es válido. Errores: Modelo.ssdl (2,93) : error 0169: Los artefactos SSDL deben tener como destino el mismo proveedor. ProviderManifestToken '9i' es diferente de '9.2' que se encontró antes.+" (something like "*The specified schema is not valid. All SSDL artifacts must target the same provider. The ProviderManifestToken '9i' is different from '9.2' that was encountered earlier.*"). We did some research about this error, but couldn’t find any solution... does anyone know how the update from Beta 3 to Final Release should be done? are we missing any configuration?
Thanks in advance!
Lucas

ODAC Beta 3 (11.2.0.2.50) starts to use two most-significant digits of an Oracle database version number for ProviderManifestToken.
You have no problem with ODAC Beta 3 by modifying '9i' to '9.2' for ProviderManifestToken. But when updating ODAC Beta 3 to final release (11.2.0.3) and doing the same modifications, the said "another error" occurs. That seems to indicate the issue is not about ProviderManifestToken itself.
I am wondering if there are different store schemas in your edmx file and the error is caused by schema filtering.
For example, having differnet store schemas for the Schema= like below.
<EntitySet Name="Categories" EntityType="Model.Store.Categories" store:Type="Tables" Schema="USER1" />
<EntitySet Name="Customers" EntityType="Model.Store.Customers" store:Type="Tables" Schema="USER2" />
Can you please check it?
Another question is: Can you regenerate the edmx file using the final release (11.2.0.3)?
This is the preferable way.
Edited by: shsu on Mar 1, 2012 12:32 PM

Space issues when updating Infinity Blade

Hey all,
I've got Infinity Blade, and it's a big app (891MB). When I go to update it, the Infinity Blade icon had a blue bar fill up until it gets to "Installing" then it says it can't do it, I don't have enough space. Now I've got 1.3 GB of space left on my iPad, so even if it was downloading a full new copy there should be enough space left. What's the deal here?
Any input appreciated, Thanks,
Dan Perkins

That's a shame... I often run into the issue when I'm at work and (being impatient) I really want to update and app now. Unfortunately, I've got the 16gb and it's almost ALL apps taking up the space, as opposed to videos. So I can't delete apps and reinstall because I'll lose their data. And I have very little music. I do have a fair bit of family pics but I'd have to go through and delete a bunch 1 by 1.
Maybe it is time that I start letting go of some of these apps that are cool but I'm REALLY not ever going to use them / play them again
Thanks for the input.
dp

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Password change issue when updating user data in SAP ABAP system

Similar Messages

Maybe you are looking for