License update

When applying a new license file to WLS6.1 installation using the updateLicense.sh
utility, it appears that the new license information is ignored upon restarting
the server. The error below suggests an invalid IP, even though the IP is correct!
Even if I edit the license.bea file directly, I get this error! This should be
a straight forward task!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
WebLogic: license signature validation error!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$

Hi.
Please open a case with support.
Regards,
Michael
pclow wrote:
When applying a new license file to WLS6.1 installation using the updateLicense.sh
utility, it appears that the new license information is ignored upon restarting
the server. The error below suggests an invalid IP, even though the IP is correct!
Even if I edit the license.bea file directly, I get this error! This should be
a straight forward task!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
WebLogic: license signature validation error!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

  • First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?

    First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?
    Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

    If you still have your serial number for Acrobat Pro there is a link to the installer here:  Download Acrobat products | 9, 8

  • I am receiving an error message "Error: 150:30" after having my computer serviced. Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1. tried to download a Licensing update, but can't get that to open.????

    Adobe Photoshop CS4
    I am receiving an error message "Error: 150:30" after having my computer serviced.
    Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
    I tried to download a Licensing update, but can't get that to open.????
    My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
    Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
    Thank You for you help!
    joe

    150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
    I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
    When you are done with the install, apply all CS4 updates.  Product updates
    Gene
    (Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions)

  • How Can I install Framemaker 10 silently with serial key and license updater?

    How Can I install Framemaker 10 silently with serial key and license updater? Is there any tool to create MSI for this?
    I tried with using http://download.macromedia.com/pub/developer/creativesuite/AAMEE/win32/ApplicationManagerE nterprise_1_all.exe and its not supporting.
    I am looking for any customization tool for Framemaker 10 from Adobe or else silent install with serial and license updater

    After creating "application.xml.override" from above link
    First after installing manually Adobe Framemaker 10,Copy "pcd.db" to your source folder from "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\" once you run "LicenseUpdater.exe"
    1) For install create batch file "install.bat" and copy below command
    @echo off
    REM =====Install script=====
    set Current=%~dp0
    "%Current%Set-up.exe" --mode=silent --deploymentFile="%Current%\deploy\AdobeFrameMaker10_en_US.install.xml" --overrideFile="%Current%\deploy\application.xml.override" --acton=install
    COPY /Y "%Current%pcd.db" "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\pcd.db"
    Exit 0
    2) For Uninstall
    * download Adobeairinstaller from Adobe - Adobe AIR to uninstall adobe AIR silently and copy this exe in source folder
    Create batch file to uninstall Framemaker 10 "Uninstall.bat" and copy below command to Uninstall
    @echo off
    REM =====Uninstall script=====
    set Current=%~dp0
    REM Uninstalling "Adobe Framemaker 10"
    "%Current%Set-up.exe" --mode=silent --deploymentFile="%Current%\deploy\AdobeFrameMaker10_en_US.remove.xml" --overrideFile="%Current%\deploy\application.xml.override" --acton=uninstall
    DEL /F /Q "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\pcd.db"
    REM Uninstalling Adobe community help
    msiexec /x {E2B04924-29F3-F49D-71E9-B90EFEDE282C} /qn
    REM Uninstalling Adobe PDF creation Add-On 9
    msiexec /x {AC76D478-1033-0000-3478-000000000004} /qn
    REM Uninstalling Adobe AIR
    "%Current%AdobeAIRInstaller.exe" -uninstall
    Exit 0
    I think this will help....

  • Evaluation License Update

    Hi, I am presently using the evaluation version of Weblogic Server 6.1. My evaluation
    license has expired recently. I am not sure how to update it. In the documentation
    for updating license it is mentioned that evaluation license can be updated. Can
    someone tell from where i can get hat evaluation license update.
    Thanks in advance.
    Regards,
    Deepak

    Hi, I am presently using the evaluation version of Weblogic Server 6.1. My evaluation
    license has expired recently. I am not sure how to update it. In the documentation
    for updating license it is mentioned that evaluation license can be updated. Can
    someone tell from where i can get hat evaluation license update.
    Thanks in advance.
    Regards,
    Deepak

  • License Update in FT STO Scenario

    Hi,
    In the Foreign trade STO scenario is a product is governed by legal regulation license check happens during STO delivery but the license master is not updated. Apparently License master update is not supported by standard SAP functionality in STO scenario unlike the normal order to cash cycle.In this case we are using quantity based license.
    Could you please let me know if there is a workaround by using user exits or by function module to fullfill the license master update.
    Look forward to your response asap.

    Thanks Venkat,
    Good point. How it works in case I want all POs(except STO) to subject SPL and Embargo but only STOs(as you said exports) for all three services like SPL, Embargo and License determination.
    I don't have flexibility in GTS at document type level activation for services level like SPL, Emb, License det seperately.
    In ECC to ensure that STO documents are passed to GTS, I have to specify FUB at MM0A application level and I don't have FUB at SD0A application level.
    Then how does it knows that only FUB(STOs) subject to license and NOT FNB(POs)?
    Thanks,
    Chakri

  • Error Code 61499 after license update (FPGA)

    Hello,
    I am a fairly experienced FPGA module user.  I have LabVIEW 2009 installed (9.0.0) including the FPGA module on a 32-bit XP system.  Everything was working fine, and I had one particular FPGA project that had been built and run within the last month or so.
    In the meantime, the license had expired, so I had to update the license.  After updating the license, I made a trivial change to the VI (changed default values of some front panel inputs), and attempted to compile and execute.
    This generated Error -61499, with the additional information:
    Error starting compile step: Make sure a compatible version of Xilinx Tools is installed at the location specified in the LabVIEW installer.
    I looked at post Error -61499 in LabVIEW FPGA  and a few other posts.  I checked the LabVIEW FPGA registry key compile path and it looks fine (C:\NIFPGA2009\Xilinx\ISE).  That directory exists and is the right size (3.74 GB).  A temporary directory is being created in C:\NIFPGA2009\srvrTmp\localhost .  I searched for the file pearl58.dll but couldn't find it.
    When I look at the recently installed license and the expired license in NI License Manager, I don't see any differences between the two other than the expiration date.
    Summary:  I had a working installation and project, updated the license file, and now get error -61499.
    Solved!
    Go to Solution.

    Here is some more information.  I found the toplevel_gen_xst.log file in the C:\NIFPGA2009\svrTmp\localhost\[temp] directory.
    It appears that some things are getting compiled.
    At the end of the log file it says:
    ERROR:HDLParsers:3264 - Can't read file "C:/NIFPGA~1/srvrTmp/LOCALH~1/SCANCO~1/NiFpgaAG_XNode0000001b.vhd": No such file or directory
    If I can figure out what that node is I'll try deleting it and regenerating it.

  • VCM 5.7.1 license update  issue

    Hi All,
    when i update VCM license  by Jlicense  according to vmware sk2020955.
    The command shows " license applied sucessfully".
    But when I login by web console, the there is still "license expired" warning.
    Any experience and suggestions ?
    thanks,
    David

    I'm having the same problem, any ideas or resolutions?
    *Edit* Just worked with VMware, turns out our workstation service had stopped. Make sure both the server and workstation services are started as they will cause certain parts of the collection to fail if they aren't.

  • Song licenses (Updated computer form Windows XP to...

    Ok, this is my problem
    I updated my computer form XP to windows 7, now in doing so I had to backup all my files, music the works,
    I  Install windows 7, etc etc,
     Put music in the music folder, download Nokia Ovi player.
     Find all music, then when I go to play the music it says it requires the license so I go OK, and wait for it to be re-downloaded. But it seems i cant re-download, any of the licenses at all so, i go to re-download  the songs again but it wants me to PAY for them as I don’t have my subscription anymore..
    Is there anyway i can play the music i downloaded with my 1 year free subscription that I got of buying my nokia xpress music 5800? As when i brought it said i can play the music anywhere and its completely me own music...

    Hey jamo128,
    Sorry to hear about the issue. Please try to rename the DRM folder.
    If this does not help, then unfortunately you have to re-download the songs from the download history in your Nokia account > Account > Download history > Subscription downloads. This should create new licenses for the music.
    Hope this helps!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Informatica license updating for 9.5.0

    You should raise a service request for this question on the My Support portal (https://mysupport.informatica.com , then follow the button Enter Online Support at the right edge almost at the top of the page). I think (at the same place) you should be able to raise a so-called Shipping Request to get new license keys for each serial number. Regards,Nico

    Hi All, In informatica how can i update a license key if i am having different serial numbers for same version. We are using 9.5.0 informatica version and for production and development we have different license serial number.kindly help me on this. Regards,Rajendra

  • Home License Update

    I have a user with a PC at home using a non-expiring Home License file for LabVIEW 2013 Professional Developoment System.
    They are being offered, by NI Update Service, many LabVIEW 2014 updates.
    Will their existing Home License file license them for these LabVIEW 2014 updates (in full licensed mode not in time limited evaluation mode) or will they need to be issued with a new Home License file?
    Solved!
    Go to Solution.

    Hi Dave,
    As long as you have a current and up to date SSP, this shouldn't be a problem but I would be sure to contact your local customer support to check the status of your SSP
    Cheers
    J
    Applications Engineer
    NI UK & Ireland
    J Hird CLAD
    NI UK Applications Engineer

  • WLS6.1 license update

    When applying a new license file to WLS6.1 installation using the updateLicense.sh
    utility, it appears that the new license information is ignored upon restarting
    the server. The error below suggests an invalid IP, even though the IP is correct!
    Even if I edit the license.bea file directly, I get this error! This should be
    a straight forward task!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license error, Invalid host IP
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$

    Try to run the utils.myip Java program (located in weblogic.jar) on the
    machine where you are trying to install the license to make sure that
    WebLogic thinks the IP is the same as you have in the license. On
    multi-homed machines, the IP address returned may not be the one you are
    using for WebLogic (so the license needs to be for the IP address
    returned rather than for the IP address being used).
    Hope this helps,
    Robert
    Chris Dormer wrote:
    When applying a new license file to WLS6.1 installation using the updateLicense.sh
    utility, it appears that the new license information is ignored upon restarting
    the server. The error below suggests an invalid IP, even though the IP is correct!
    Even if I edit the license.bea file directly, I get this error! This should be
    a straight forward task!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license error, Invalid host IP
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$

  • License update following sim/number change!?

    I changed the sim in my phone after changing my network. On first load maps asked if I wished to transfer licenses to the new sim. The Traffic license transfered ok but the main nav license did not! How can I transfer this manually?

    fixed

  • How to configure license file for Memory Leak tool and WL Server 9.2?

    (I posted to general JRockit forum before realizing existence of this forum which is probably more applicable.)
    Here's our problem:
    Running latest version of WL 9.2 MP3 and JRockit Mission Control 3.0.1
    Able to run Mission Control, and connect to the WL Server and to run View Console with no problems.
    I can't get Memory Leak tool to run because it complains about needing a license file.
    First I tried with off the shelf WL 9.2 MP3.
    Get error:
    A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (192).
    Error: Can not find component Memory Leak Detector for JRockit * in the license file. Please check http://www.jrockit.com/license for license updates.
    So I downloaded license file from JRockit download site - wls92.zip. It contains several files, but no clear instructions on what to do with these files. I copied one of these files "LIC-WLSP92.txt" to my JRockit home as C:\bea\JROCKI~1\jre\license.bea
    Tried again. Restarted WL server. Restarted JRockit Mission Control.
    Get error: A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (3052).
    The license file does not exist at: C:\bea\JROCKI~1\jre\license.bea
    Any advise on how to install license or who to contact for help?

    Installed Mission Control 3.0.3.
    Got following message when I attempted to run Memory Leak:
    A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (192).
    Error: Can not find component Memory Leak Detector for JRockit * in the license file.
    Please check http://www.jrockit.com/license for license updates.
    I believe that we're using the latest downloads of WebLogic 9.2.x and JRockit.
    WebLogic is running using 9.2.3 and JRockit build R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia2
    Contents of C:\bea\jrockit_150_12\jre\license.bea:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <bea-licenses>
    <license-group format="1.0" product="JRockit" release="*">
    </license-group>
    </bea-licenses>
    Could WebLogic be misconfigured?
    Any diagnostics to help figure out the licensing?
    Any other ideas?

  • I have a problem when I updated CS6:

    hi,
    I have a problem when I updated CS6:
    Extension Manager 6.0.5 Update
    Installation failed. Error Code: U44M1P7
    Adobe Photoshop 13.0.5
    Done with Errors. Error Code: U44M1P6
    What is it?
    Thx
    Message was edited by: PhotoPlusMore

    www.photoplusmore.com.au       
        m: 0408 96 11 40
        p: (02) 955 22 707
    Begin forwarded message:
    From: Lee_Ann_H <[email protected]>
    Subject: I have a problem when I updated CS6:
    Date: 23 June 2013 2:40:39 PM AEST
    To: PhotPlusMore <[email protected]>
    Reply-To: [email protected]
    Re: I have a problem when I updated CS6:
    created by Lee_Ann_H in Adobe Creative Cloud - View the full discussion
    Hi PhotPlusMore, these links may help.
    Extension Manager: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
    Photoshop: http://blogs.adobe.com/photoshopdotcom/2013/06/photoshop-cs6-13-0-5mac -13-0-1-2win-perpetual-license-updates-now-available.html
    Let us know if you're still having trouble. Thanks!
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5440165#5440165
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5440165#5440165
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5440165#5440165. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for