License usage not view, user connection problem

I have terminal server 2008 R2 and license server on same server in domain. Instaled 15 license per user and license in domain scope and diagnostic is OK. But license server not tracking user (view usage) only generated report list usage. Problem is only
5 user can by logon is same time. In Event viewer not any report about this.

Hi,
In RD Session Host Configuration (tsconfig.msc), please double-click on RDP-Tcp. On the Network Adapter tab, please make sure it is set to
Unlimited connections.
It is normal in RD Licensing Manager to not show Per User RDS CAL usage. You need to create Per User Usage CAL report each time and then save the report as a csv in order to view usage.
Thanks.
-TP

Similar Messages

Snow Leopard VPN will not let users connect consistently

I did a clean install to Snow Leopard, and now my VPN is completely odd. It randomly does or doesn't let users connect.
Setup:
- Snow Leopard 10.6
- OpenDirectory has been added to (vpnaddkeyagentuser /LDAPv3/127.0.0.1)
- Firewall is off for these tests to rule it out as being the problem
- IP address and FQDN are the same as they were when server was 10.5
- DNS, DHCP, and all other services are working fine
- To rule out password problems, all of the passwords in the test are the same
- All tested accounts have the same password
I attempted 3 connections with each account in each scenario
Round 1 - Access set to all users and all groups, and admins have access to all services.
Test1 - local admin: worked, failed, failed
Test2 - od normal : worked, worked, worked
Test3 - od admin : worked, failed, worked
Test4 - local admin: worked, worked, worked
Round 2 - Access set to only those in the group "Test Group", and admins have access to all services. "Test Group" only includes the users: Test2 and Test3
Test1 - local admin: failed, failed, failed
Test2 - od normal : failed, worked, worked
Test3 - od admin : failed, failed, failed
Test4 - local admin: failed, failed, failed
Is anyone else having these odd VPN problems?

I figured out the problem with the VPN, but is stretched well beyond VPN.
I'm not sure exactly how everything melted down, but somehow the installer messed up massive amounts of things. I won't even go in to it other than to say...
- Certain programs wouldn't install to the primary drive (they'd show the drive, but with a "!" on it)
- Mean while when booted normally, Disk Utility would not see and drives except the CD rom
- No two programs saws the same set of hard drives or cds
- If you booted from CD, Disk Utility saw all drives, but Start Disk only saw the CD
- Software Update (even from the command line) would fine no new updates, even though none had been applied
- If you blessed the primary hd, it would boot, but if you tried to boot normally you'd get a flicker "?" folder and Apple symbol
- etc...
The weird thing is, all of the other services were working fine (Web hosting, VPN, AFP, SMB, firewall, ical, ichat). But obviously something dreadful had happened during the install, which is odd because it was a clean install.
I reformatted the drive, reinstalled, and all is fine now.
Weirdest installation problem I've ever encountered.

Listener on RAC node 2 not accepting user connections

Hey guys i am experiencing a disturbing scenario, i have a 2 RAC node cluster . The problem is that the second listener is not registering any connections . I have verified the services of listener using lsnrctl status (the default name is LISTENER), i also have verified the local and remote listener parameters they are fine but running the fol query shows count =0 against inst_id=2;
SQL > select count() from gv$session where username='XYZ' and inst_id=2;*
Count
0
Any help is appreciated in this regard please.

Yeah i know very well the purpose of SCAN . But web admins are sticking to the vip . Well here is the output of lsnrctl status:-
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 11-APR-2013 16:41:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 10-MAR-2013 13:00:14
Uptime 17 days 2 hr. 42 min. 18 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/fedb6/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=5.2.21.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=5.2.21.7)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "grid1.xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
Service "grid1XDB.xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
Service "xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
The command completed successfully
and here is tnsnames.ora output :-
GRID1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = grid1-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
PRIMARY1_SERV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 5.2.21.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
(INSTANCE_NAME= grid11)
PRIMARY2_SERV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 5.2.21.6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
(INSTANCE_NAME = grid12)
)

Second node not accepting user connections

Hi,
I have a situation ,that due to maintenance activity, we bounced the servers, after bounce all scan, vip, listeners including rest of resources came up with no issues,
I see among the RAC- EBS nodes the connections were allowed but not from out side databases(we have DB links to pointing this DB) and other applications like SOA etc.
observed the listener log files as below., could you please review my case and advice.
Here seems a problem on host2(no connections from 08-JUN-2013 21:31:47 to 10-JUN-2013 07:35:11 from host07/host08/outside connections ):
08-JUN-2013 21:31:22 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host08.domain.net)(USER=schprod))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.T6.S.V)(PORT=23691)) * establish * PROD * 12514
08-JUN-2013 21:31:47 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host08.domain.net)(USER=schprod))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.T6.S.V)(PORT=23727)) * establish * PROD * 12514
10-JUN-2013 07:35:11 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host07.domain.net)(USER=schprod))(SERVER=dedicated)(INSTANCE_NAME=PROD2)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.26.7.4)(PORT=30269)) * establish * PROD * 0
10-JUN-2013 07:35:11 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host07.domain.net)(USER=schprod))(SERVER=dedicated)(INSTANCE_NAME=PROD2)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.26.7.4)(PORT=30271)) * establish * PROD * 0
10-JUN-2013 07:35:13 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host08.domain.net)(USER=schprod))(SERVER=dedicated)(INSTANCE_NAME=PROD2)) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.T6.S.V)(PORT=56622)) * establish * PROD * 0
10-JUN-2013 07:35:17 * (CONNECT_DATA=(SERVICE_NAME=PROD)(CID=(PROGRAM=oracle)(HOST=host08.domain.net)(USER=schprod))(SERVER=dedicated)(INSTANCE_NAME=PROD2)) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.T6.S.V)(PORT=56660)) * establish * PROD * 0
host2 allowed connection starting from 09-JUN-2013 11:29:59 between ERP nodes (but not from host07/host08):
08-JUN-2013 21:33:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=host2.domain.net)(USER=oraprod))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER_PROD_host2)(VERSION=169870592)) * stop * 0
TNSLSNR for Linux: Version 10.2.0.5.0 - Production on 09-JUN-2013 11:27:57
Copyright (c) 1991, 2010, Oracle. All rights reserved.
System parameter file is /prod/product/10.2.0/network/admin/listener.ora
Log messages written to /prod/product/10.2.0/network/log/listener_prod_host2.log
Trace information written to /prod/product/10.2.0/network/trace/listener_prod_host2.trc
Trace level is currently 0
Started with pid=1309
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=1581)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T8)(PORT=1581)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCPROD2)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
09-JUN-2013 11:27:57 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=host2.domain.net)(USER=oraprod))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_PROD_host2)(VERSION=169870592)) * status * 0
09-JUN-2013 11:28:00 * service_register * PROD2 * 0
09-JUN-2013 11:28:09 * service_update * PROD2 * 0
09-JUN-2013 11:28:15 * service_register * PROD1 * 0
09-JUN-2013 11:28:15 * service_update * PROD2 * 0
09-JUN-2013 11:28:18 * service_update * PROD2 * 0
09-JUN-2013 11:29:59 * ping * 0
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
09-JUN-2013 11:27:57 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=host2.domain.net)(USER=oraprod))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_PROD_host2)(VERSION=169870592)) * status * 0
09-JUN-2013 11:28:00 * service_register * PROD2 * 0
09-JUN-2013 11:28:09 * service_update * PROD2 * 0
09-JUN-2013 11:28:15 * service_register * PROD1 * 0
09-JUN-2013 11:28:15 * service_update * PROD2 * 0
09-JUN-2013 11:28:18 * service_update * PROD2 * 0
09-JUN-2013 11:29:59 * ping * 0
09-JUN-2013 11:29:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=host2.domain.net)(USER=oraoem))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=host2.domain.net)(PORT=1581)))(VERSION=169870592)) * status * 0
09-JUN-2013 11:30:13 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=perl)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9130)) * establish * PROD2 * 0
09-JUN-2013 11:30:13 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9131)) * establish * PROD2 * 0
09-JUN-2013 11:30:13 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9132)) * establish * PROD2 * 0
09-JUN-2013 11:30:13 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9133)) * establish * PROD2 * 0
09-JUN-2013 11:30:14 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9134)) * establish * PROD2 * 0
09-JUN-2013 11:30:14 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9135)) * establish * PROD2 * 0
09-JUN-2013 11:30:14 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9136)) * establish * PROD2 * 0
09-JUN-2013 11:30:14 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9137)) * establish * PROD2 * 0
09-JUN-2013 11:30:15 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9138)) * establish * PROD2 * 0
09-JUN-2013 11:30:15 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9139)) * establish * PROD2 * 0
09-JUN-2013 11:30:15 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9140)) * establish * PROD2 * 0
09-JUN-2013 11:30:15 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9141)) * establish * PROD2 * 0
09-JUN-2013 11:30:15 * (CONNECT_DATA=(SID=PROD2)(CID=(PROGRAM=emagent)(HOST=host2.domain.net)(USER=oraoem))) * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.T1.T)(PORT=9142)) * establish * PROD2 * 0
Thanks in advance.
Venkat

Hello Venkat,
It seems best to create a service request against the RDBMS/RAC product for this.
Regards, Carlo den Otter.

Discoverer Viewer 4i Connection problem

We're using Discoverer 4i (4.1.48.08.00) ( with Ebiz 11.5.10 CU1 )
The issue is that we're not able to access the discoverer viewer pages
The URL:
http://<machine>.<domain>/discoverer4i/viewer?
just hangs
Discoverer Plus is working fine. It can be accesssed.
Which made me believe that maybe there is a problem with the Jserv. Bounced the apache.
Still no luck..
Any suggestions on what can be possibly checked?
I don't see much useful in apache error_log ..
( Please don't suggest upgrading to disco 10g :-) )

Hi
You seem to be missing the port from the URL.
Try something like this: http://<machine>.<domain>:7778/discoverer4i/viewer
Best wishes
Michael

Photoshop stopped downloading and would not resume. says connection problem but there is none. why?

why make software that does not work? tried to download photoshop 13 hours later at 55 % it paused and would not restart. then gave error code 109 says no connection but there is no problem and the hd is 1 tb and empty so whats the deal?

Please refer : http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Alternatively, you can try downloading from the direct downloaded links provided at : http://prodesigntools.com/adobe-cs6-direct-download-links.html
But make sure you follow the important instrctions on the page before initiating the download.

Galaxy note 2 LTE connection problem.

I live in Richmond, VA (LTE covered) but I am only getting 3G signals on mine. Do I have to change some type of network settings?

go to settings, then to "more settings" then to mobile network, then network mode... change it from there

Revert Mountain Lion preview to Lion version (notes view)

I take a lot of notes on PDF presentations for school, and with the recent upgrade to Mountain Lion, Preview changed its UI. In lion I would take notes and it would display them with a line connected to the point on the PDF where I created it. Now in Mountain Lion, there is a new "Highlights & Notes view". The problem I have with the new view is that there is no way to easily see the notes for each slide. So I have to scroll through the PDFs then I have to separtely scroll throught the notes on the side to find the note for the corresponding slide. - This would not be a big deal, but sometimes I have presentations with over 100 slides with multiple notes on each slide, making it very cumbersome.
So.. Is there anyway to get the Lion preview back, or is there a way to simplify the notes view?
Thanks for any input
Mike

If you mean this:
uncheck the box marked Documents & Data in the iCloud preference pane.

Network connection problems, please help!

I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!

I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode)

Lumia 900 Cellular Connectivity problem (AT&T) aft...

I've had a Lumia 900 on AT&T for about 5 months and have not had any connection problems. However, after the Tango update (OS *.8779.*; Firmware: *.12223), when I take my phone into work (which has no cellular reception normally) for an extended time and then take it outside it will sporadically not reconnect to the cell tower. It will show no connection forever. If I turn airplane mode on then off or turn off and then on the data connection, which seemed to fix similar problems before, I still get no connection.
The only solution is to restart my phone. One time it kind of hung on restart. The other time the phone froze up when I was trying to turn on/off the data connection. Restarting brings the cellular connection back. (Almost as if whatever software is controlling the cellular connection is crashing).
*I also installed the beta Nokia Counters program after the update -so that may be the problem too?
Has anyone else experienced this before. Is it a Tango issue, or a common issue that coincidentally started for me after the update?

I am having a similar issues with Wifi & cellular connectivity Issues. In addition, am seeing that my Lumia 900's screen is turning black with no response from the power button or any other buttons (bottom buttons will be light though). I have to reset the phone by pressing volume power camera buttons. And one or two times today it had issues restarting cycling the Nokia logo, AT&T logo, then black screen about three to four times before it showed the Windows Phone logo to fully boot up.
Totally Disappointed.

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

RV042 VPN Client Access not able to connect two users at same time

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3. Any help is greatly appreciated.

Were your QuickVPN clients behind a firewall router of some sort? For multiple QuickVPN clients to be able to connect to the remote RV042 at the same time, the local firewall router must have VPN Passthrough correctly implemented. You could try using a RV042 as the firewall router for your QuickVPN clients and you should be able to maintain 2 tunnels at the same time to the remote RV042.

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

License usage not view, user connection problem

Similar Messages

Maybe you are looking for