"Licensing timed out" when creating to Remote Desktop Connection

Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth Lai

Hi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

"remote desktop connection has stopped working" When printing from remote desktop connection

I have been having a issue when using a windows 7 machine. I have Remote Desktop to a session on Windows2008 R2, I am using the local printer resources to redirect the printing. However everytime i try to print it crashes the remote desktop application.
Gives me "remote desktop connection has stopped working." I have 4 other computers connected and printing with no issues what so ever. This only happens when i print. It does print by the way just the application crashes.
-I have also updated the printer drivers to newest possible thru the manufactorer website. The printer is a Brother MFC-8890DW. Windows 2008 R2 is up to date for the RDS server. 3 other machines are able to Remote in and print. The user is able to print using
diffrent machines just not the Windows 7 machine.

Hi,
Happy to hear that you resolved your issue. For another issue which you are facing here trying to provide some suggestion.
As you have commented that you are facing issue with second screen resolution on wide screen. The setting which I am suggesting can only applies when you are using multi-monitor Remote Desktop connections. If you are making Connections using a single
monitor do not use this setting.
So for this you can try to apply “Limit maximum display resolution” setting in group policy, where you can mention the width & height for the screen to display. The setting can be applied on below mentioned
path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
Meanwhile sharing article with you for more information.
Remote Session Environment
http://technet.microsoft.com/en-us/library/ee791847(v=ws.10).aspx
Hope it helps!
Thanks.

Overriding function keys when using MS Remote Desktop Connection

Is there a way when connected to a RDP client using MS Remote Desktop Connection to prevent the function keys from being intercepted and handled by OSX. For example on my iMac keyboard, function keys 7 to 12 are used to control itunes and alter the system sound volumes. Is there a way to have these keys processed by the RDP client instead, so that the remote Windows OS can handle them?
While this question currently relates to an iMac, I'll soon be using a Macbook Pro in the same scenario, and will be requiring a similar solution for that machine.

Thanks for your suggestion. Setting that option only toggles what the function keys are interpreted as in OSX, but the key presses are still not processed by the OS in the RDP session. For example, pressing F9 when the RDP window is active shows all open OSX windows in Expose, rather than having the keypress processed by the active software in the RDP session
I did try posting to the forum you mentioned yesterday, but due to server issues my post failed. I'll try again today.

One note starts on its own when I use Remote Desktop connection

Whenever I use RDC to connect to my home server, One note start and pops up totally on its own on my local computer.
Can anyone explain why, and more importantly how I can stop this behaviour?

After hours of reading through forums and posts similar to this one, and knowing the proposed work-arounds were not going to be accepted by my client that was having the issue, I came to the conclusion that it had to be a print driver or the software that
gets installed along with the print driver on the server that was causing my issue.
I started searching and came across some Epson software that was installed on the remote desktop server when I was trying to get a scale house ticket printer to work as a network printer. The printer was not installed on the server but the software remained
in the add and remove programs list.
I removed the three Epson entries in the add and remove programs list and the problem stopped.
I don't know if this was mentioned above but the behavior I observed was that the print job was going to multiple printers, not just OneNote. I my case if I removed the OneNote pritner I would then get prompted by the Microsoft XPS Document Writer for a
file location to save to.
I could open the print queue for each of the printers that were getting redirected on my local machine, I would then log in to the remote desktop server that I was having the issue on. I could see the "remote desktop redirected printer doc" get
sent to each printer. If the printer was online it would flash for only a moment and the printer would ignore the job as if nothing had been sent to it. If the printer was offline the job would stay in the queue.
I think this was mentioned above so I will reiterate, don't approach the issue like it is a problem just with OneNote or with a particular driver from a particular manufacturer. We know at the very least that the problem can be caused by Samsung driver/printer
software and by Epson driver/printer software so it stands to reason that there can be other drivers/printer software packages that can cause the same problems.
I hope this helps!

When I open Remote Desktop Connection, it reads "cannot open default.rdp". What can I do to fix this?

Hi, when I open RDP on my iMac, it reads "cannot open default.rdp" and it never saves my preferences or connections. It resets after each launch.
How do I go about fixing this?
UPDATE and FIX
I went to the Finder menu, clicked on GO, held down Option (Alt) to bring up the Library.
In the Library, I browsed to Preferences, found the com.microsoft.rdp plist and deleted it. Then I emptied my Trash. If you get an error saying rdp plist is in use and cannot be deleted, quit out of RDP or reboot the machine (if quitting RDP doesn't work).
Also, there was a permissions issue. I browsed to the Applications folder, located the Microsoft Office folder, right clicked the folder (or CTRL click) and selected GET INFO. First--In order to make any changes, authenticate with admin privileges using the lock icon (put in your username and password). From there (under Sharing & Permissions), I made sure my username (account currently logged in) and everyone had Read & Write privileges, then I clicked on the little gear icon (drop-down) and selected Apply to Enclosed items.
Voila!
This worked for me.

Actually, I still receive an error when I try to save the connections.
I get an error that reads
"Make sure that you have permission to write to the location where you want to save the file"
Any help with this would be great!
ah, RDP on a mac

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Licensing timed out

When trying to logon to a server with RDP, after sitting in the 'estimating connection quality' state for a while, certain users are getting the following error message:
"A licensing error occurred while the client was attempting to connect. (Licensing timed out)"
What could be the problem?

Hi,
Thanks for your posting in Windows Server Forum.
There are several reason as you face this issue. The issue might occurs due to firewall, IPsec over TCP, RDS CAL or licensing. Please go through below article for detail information.
A licensing error occurred while the client was attempting to connect. (Licensing timed out)
http://technet.microsoft.com/en-us/library/cc775526(v=ws.10).aspx
Troubleshooting Remote Desktop Licensing Error Messages
http://technet.microsoft.com/en-us/library/cc756826(v=ws.10).aspx#BKMK_11
Hope it helps!
Thanks,
Dharmesh

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

SSIS Package will only run as SQL Agent Job when I have remote desktop to server open.

Hey guys, so I have another problem to add to the already massive 'SSIS/SQL Server Agent Job' pile. After days of searching, I can't seem to find anything specific to my problem though.
The setup is as follows: a SSIS package that refreshes and saves excel files that are hosted on a server. The package runs fine on the local machine, using BIDS on the server, and will even work as a SQL Agent Job on the server IF there is a remote
desktop connection to the server. To elaborate, if I simply run the job as you would normally do it will fail and give the below error. If I run the job while either myself, or a different machine, has a remote desktop connection to the server where the
job is scheduled - it will run successfully.
Below is the error from the History File of the job. Any help would be greatly appreciated.
Source: Refresh Excel and Save      Description: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x8000401A): Retrieving
the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 8000401a.     at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.ExcelRefresh(String FileName)
at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.Main()     --- End of inner exception stack trace ---     at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)     at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)     at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)     at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo
culture, String[] namedParams)     at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)     at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
UPDATE:
In my previous post the Identity in DCOM Config file for Microsoft Excel was set as The Interactive User. The job was working only when I had a remote connection to the server open.
If I set the Identity to 'This User' and use the username and password of the server login account, it will work as a scheduled job without needing an open remote connection to the server. So it works, great! but I have reservations setting this
for all instances of Excel for the server. I'm sure other users have different accounts they use for running Excel. Any suggestions around this?

Hi LiamSexton,
It should be the server-side Automation of Office issue described in the following KB article:
http://support.microsoft.com/kb/257757
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
User Identity: Office applications assume a user identity when the applications are run, even when Automation starts the applications. The applications try to initialize toolbars, menus, options, printers, and some add-ins based on settings in the user
registry hive for the user who launches the application. Many services run under accounts that have no user profiles (such as the SYSTEM account or the IWAM_[servername] accounts). Therefore, Office may not initialize correctly on startup. In this situation,
Office returns an error on the CreateObject function or the CoCreateInstance function. Even if the Office application can be started, other functions may not work correctly if no user profile exists.
To work around the issue, you can refer to the following alternative introduced in the article:
Most server-side Automation tasks involve document creation or editing. Office 2007 supports new Open XML file formats that let developers create, edit, read, and transform file content on the server side. These file formats use the System.IO.Package.IO
namespace in the Microsoft .NET 3.x Framework to edit Office files without using the Office client applications themselves. This is the recommended and supported method for handling changes to Office files from a service.
Regards,
Mike Yin
TechNet Community Support

It says my session has timed out when I try and update an iOS game.What should I do to fix it?

IT says my session has timed out when I try to update and ios game.What should I do to update my games?

You may have a USB issue as documented here:
http://support.apple.com/kb/TS5254

How do I stop my itunes from saying my session has timed out when i'm trying to download a song

How do I stop my itunes from saying my session has timed out when i'm trying to download a song

What troubleshooting steps have you tried so far?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

Hi Dave,
You need to type the server name that was assigned by your mail administrator for the server running Exchange. So please ask your administrator for the Server name. Thanks for your understanding.
For more information, here is an article for your reference.
Add or remove an e-mail account
https://support.office.com/en-ca/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
Select a user disconnect so that you can sign in.
There are too many users signed in
User1 Active
User2 Active
() Force disconnect of the user

Hi,
In addition you can also refer following article for RDL configuration.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Request timed out when purchasing music. Fresh install of Win7.

For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

ITunes store keeps saying that my session has timed out when trying to buy a product from the store

I Tunes is telling me that my session has timed out when trying to buy a gift voucher, which i have done many times before.
The most recent change i'v made to my computer before this happened was to download an update (MacOSX updatecombo 10.7.3dmg)
a couple of weeks ago. I'v turned off the firewall as suggested whilst trying to transact and turned it back on again, but don't know
what else to try. The problem is three days old as i left and came back to it to see if there might be a glitch in the system.
I'v been able to access the credit i have in the store, but not buy the itunes voucher to email to my own a/c. Please help someone if you can
Sandystone.

Thanks for your suggestion Ned01, I tried this as a last ditch attempt, unfortunatly it made no difference in my case, but i'm pleased it did for you. However, because you reminded me to have another go at this problem, i tried something else (which i'd unsucsessfuly tried before), that is, i deleted the 'CLICK & SAVE " a/c i'd set up recently, and reverted to my previous payment me and would you know it , this time it worked !! I set up a trail purchase and it worked.
It seems to me that other poeple with this problem have to solve it by trail and error, but thank you for your help.Sandystone..

"Licensing timed out" when creating to Remote Desktop Connection

Similar Messages

Maybe you are looking for