Life cycle method logic

Hi. I want to ask a few questions about the life cycle methods of Windows Phone App:
the OnNavigatedTo and OnNavigatedFrom, when is that methods called and what method is called when app goes to background, the screen locks(screen saver) and when app resumes? Thank you.

Hi,OnNavigatedTo
this method call after the initialization section.I recommend you load your data asynchronously. OnNavigatedTo is
one place where you can start the loading.
OnNavigatedFrom:- This
method call when application leave the page.OnNavigatedFrom is one place where release application page resources/clean
memory/clean Back stack entry etc.eg-If application running and you press back button/start button then this method call.
Don't
forget to mark the right answer and vote up if helps you.

Similar Messages

Where in the MIDlet life-cycle should I create multiple forms with LWUIT ?

Hi all,
I must create two LWUIT forms in my application. Where should I create the two forms ? I created the first form in the startApp life-cycle method , and when I tried to create also the second form in the startApp method then there is a NullPointerException raised when running the application !
So where , or how , should I create the second form ?
Thank you very much indeed
Edited by: andrianiaina on May 20, 2011 1:59 AM

I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.

What method is called only once in the life cycle?

Hello,
What method is called only once in the life cycle of an Entity Bean and Session Bean?
Is it ejbRemove()?
Thanks

hi,
ejbCreate() and setSessionContext() are called once by the container after the bean instace is created.when the bean instance goes to pool and again return to ready state to handle client requests these methods r never called .only bussiness methods r called.this is in case of stateless session bean.
in case of stateful session bean, each bean instance is associated with client.so,when new client requests, new bean instance is created and above 2 methods are called. no pool terminology in case of stateful session bean.
ejbRemove() is called by the container when it is abt to remove bean instance,so it its obvious tht it is called only once.

Creator Page Life Cycle Callback Methods

Hi,
In JSC Field Guide, we can read that in with JSC 2 we can use Page Life Cycle Callback Methods.
It 's a good thing but what about compatibility with JSF implementation ?
Best regards,
Regis

Hi,
Could you please explain what you mean by "compatibility with JSF implementation"?
Cheers
Giri

Life cycle of a web dynpro callable object

What is the life cycle of a web dynpro callable object.
Means when that Web dynpro callble object is used in a GP process which method of that component called first and what is the sequence of the method execution in that.
Can anyone please explain me.

Sorry ritu there was one mistake in the above two replies.
The actual execution of the methods when a callable objects is get executed is as following
1.component controller's init() method
2. interface's init() method
3.view's init() method.
4.interface's execute() method
5.view's wDoModifyView() method.
If you want to change anything on your view according to the change in the interfac's execute method.
Then you have to do that coding in view's wDoModifyView() method.
with regards
shanto aloor.

Regarding SLCM (Student Life Cycle Management)

Hi
does any one working on Student Life Cycle Management(SLCM)
can any one pls let me know what are the function modules present in the predefined business package and how to know what are the predefined functonalites given by sap.
when i test the predefined Iviews i get an error for some of iview as student object id not found.
can any one pls let me know about this
Bye

Ok Fine
I have some points to share thise issue with u
first thing is , iam using wrong application for the requirement.
and even i use wrong apps some thing result should be show, as i said the error i got
we raised an sap Oss for this, they provided the solution as stating that we are using the apps which are specific to the advisor but not for the students specially.
So if u want to use those apps for student purpose we need to get that student object and pass in our application.
for this purpose we need an abaper help who is well versed in the coding part.
just modify the code of required application where u fetch the object id (BY Coding) in ithe intialization method,
then the appication works fine
this is the solution i got and all my apps are working fine now.
Thanxs
sandeep

Jsf 1s phase of life cycle how knows ths components of the jsp with jsf tag

i wish to know how faces servlet knows the jsp s view components while creaTI NG component tree at first request to input jsp which may have jsf tags.in the first phase faces servlet doesnot know input jsp with jsf tags what componnets it has. it is actually atthe response send or forward time which is the final phase when the tag ge executed and output is sent to client.i did understandin jsf life cycle in 1 st phase component tree is created at first request in 1 st phase .

Hi,
though a FacesContext holds the values used by a request, it doesn't mean it lives for as long as the request. The best explanation I found is from the JavaDocs
release
public abstract void release()
+Release any resources associated with this FacesContext instance. Faces implementations may choose to pool instances in the associated FacesContextFactory to avoid repeated object creation and garbage collection. After release() is called on a FacesContext instance (until the FacesContext instance has been recycled by the implementation for re-use), calling any other methods will cause an IllegalStateException to be thrown.+
The implementation must call setCurrentInstance(javax.faces.context.FacesContext) passing null to remove the association between this thread and this dead FacesContext instance.
Throws:
java.lang.IllegalStateException - if this method is called after this instance has been released
Frank

Designing issue in Adobe Life Cycle in interactive form

Hi,
My design in Adobe Life Cycle is like,I have to show one image in left corner of the page and giving header and footer
by using Static Text from Library.I have created the designing and running this application ,it is running fine.But my requirement is i have to show 50 pages and each page should have same header and footer.How can i do it ?
And how i will break the pages in to 50 pages.
Thanks & Regards
Muna

Open the PDF file
Click Ctrl+D (which opens up properties diaglo box)
Switch to Security Tab
Change security method to No Security
If it asks for password - provide the password
Click Save
Try to re-open the PDF to ensure that it does not ask you to enter password
now open the PDF file using LC Designer
HTH
--Santosh
http://about.me/nskumar

How to invoke adobe life cycle webservice using c++ (how to pass blob structure as argument)

We already wrote sample code (.NET C#) to access livecycle webservice(this convert the input file into pdf file) using below link from adobe
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/common/ht ml/wwhelp.htm?context=sdkHelp&file=000088.html
We want to write c++ client to invoke adobe life cycle webservice. I have sample code to invoke the given webservice using plain c++ but I am stuck up with 'how to pass BLOB structure as argument to CreatePDF() method' and
plus 'how to get ouput as mapItem[]' . Is the code to convert to pdf works fine with .NET and java only? Not with c++ or VB?

In this case the LiveCycle services are exposed as web services that can be consumed by any application language that can interact with web services. While the sample published are for c# and Java there is no reason that other web service aware languages (C++, Perl, etc) wouldn't work.
I'm not a Microsoft C++ expert, but as far as I understand all you need to do is create a web reference and then have your C++ classes interact via the generated proxy classes. The syntax will be different, but the concept is the same

Life cycle or whatever it is...

I think the reason why this doesn't work has something to do with the life cycle...
The point is I need to render only the fields related with the selectedItem in the selectOneListbox and all the rendered items are required.
My problem is, when the SelectedItem is selected all the fields shows the 'blank field' message and it doesn't render the fields related to the chosen selected item. The feeling I have is that the value associated with the selectOneListbox never updates...
Here is a selectOneListbox where the value "#{editInterfaceBean.networkInterface.linkType}" is associated with the item selected (or should be...)
<h:outputLabel for="linkType">
     <h:outputText value="#{msgs.linkType}:" />
     </h:outputLabel>
     <h:selectOneListbox id="linkType"
          size="1"
          onchange="submit()"
          immediate="true"
          value="#{editInterfaceBean.networkInterface.linkType}">
          <f:selectItems value="#{editInterfaceBean.linkTypes}" />
     </h:selectOneListbox>
     <h:panelGroup />Look that the required and rendered fields are associated with the same method:
<h:outputLabel for="dslLogin"
rendered="#{editInterfaceBean.dsl}">
     <h:outputText value="#{msgs.login}: " />
     </h:outputLabel>
     <h:inputText id="dslLogin"
          value="#{editInterfaceBean.login}"
          rendered="#{editInterfaceBean.dsl}"
          required="#{editInterfaceBean.dsl}">
     </h:inputText>
     <h:message for="dslLogin" styleClass="errorText"
          rendered="#{editInterfaceBean.dsl}"/>This is the method that the rendered and required field are associated with. Observe that it return the value associated with the value field on the selectOneListbox.
public boolean isDsl() {
     return this.networkInterface.getLinkType().equals("dsl");
}

Hi guys! Well, I tried the valueChangeLisener, didn't worked. In the end I decided to send global messages, validating in the bean, not in the page... it's not really the best thing to do but... works.
Thanks anyway!

SAP HCM Life Cycle

Hi Expert,
Can anyone help me with the life cycle stages of SAP HCM.
I have a student who asked me what is the concept of SAP HCM, I explained about where was it started, what is the architecture, why is SAP preferred against other applications, modules covered, logic of integration... I would like to know if I am missing on anything as far as Concept is concerned.
Thank you in Advance.
Sejal

Hi,
There is nothing as such called lifecycle of SAP HCM.
It is similar to an ERP application, and basically your organization first decides which of the ERP module they are going to implement, once they have decided to go for HCM, they wil opt for it.
Again in HCM it depens on customer which module he is going to implement and HCM is vast it inlcudes PA, OM, TIME, PAYROLL, BENFITS, TRAVEL MANAGEMENT, LSO, Performance management, HR Forms and Processes etc.
This implmentation has a life cycle - like
Requirement gathering, Blue printing, Realization, implementatin (Configuration and coding), Custom implemenation, Integration if required, Testing (includes, UT, SIT and User acceptance testing), Documentation and hence Go Live.
This is a huge process and requires domain / business / technical/ functional / Quality / Knowledge experts.
Hope it helps you.
Thanks & Regards, Swapnil Mishra

Mass functions in Life cycle Planning

Hi Experts,
Does anybody know if there is method using which we can create mass like profiles, or atleast carrying out a mass assignment of Phase out profiles, or Like profiles, Phase in Profiles in the Assingments table in Life cycle Planning?
We ahve the following requirements:
1. Assign 1 Phase out profile to some 5000 products, how can we achieve this other than manually assinging in the assignments table.
2. Is there a way to create 100's of Like profiles at one time?
I am looking for first SAP stadard functionality t handle this or other wise develop some custom programs to do it. But I am not sure how much feassible this is.
I really want to know how companies handle these requirements of mass discontinuation using Phase out profiles in DP.
If nothing works out, I think copying products from an excel and pasting it in the assingments table and then assigning one Phase Out profile to these products and repeating this step for 5000 products will be my only option.
Please help.
Roopa

That select block functionality is the stupidest thing I have seen. I initially thought it was similar to 'select all' but it is not. Let's say you have 10 records & you want to select all. Then you select the 1st row and 10th row and if you use 'select block' then all records inbetween will be selected. You can then delete or copy them depending on your need.
The closest thing that I see here in assigning Like & PI/PO profiles is the 'Copy line' functionality. May prove helpful if you want to assign same like or PI/PO profile to many products. Ofcourse, you need to enter the products/characteristics but atleast the task of picking/choosing profiles can be minimized. Try & see how best you can use it in your mass assignment.
Hope this helps.
Cheers,
Srinidhi

Page life cycle problem

We suspected af:tree had a bug but we observed during debugging that our problem is due to page life cycle and we are searching a way to solve it at the best :
Our problem is the following :
1) we have in the same page a af:tree linked to a java bean data control that present some content in a hierarchy form (link an index) and a second part that contains some ui that represent the selected af:tree node content (linked java bean content). The second part ui's are updateable
2) when we first load the page the af:tree is correctly rendered and we are able to navigate into into it without any problem (expand/collapse). The ui's are empty because we didn't select anything
3) when a node is selected in the af:tree the correspoding data are loaded in ui's. That is perfect.
4) when a second (another) node is selected we discovered that
4.a) the af:tree was positioned to the new node selected that mean that we changed the context in our java bean
4.b) the changes previously done in ui's were executed (eved nothing was edited) in the java bean and that in the wrong context.
This situation cause a mismatch in our java bean data
What is the best way to solve this ?
Is this described somewhere in the documentation how to solve such problem in a same page ?
Is ppr the way ?
Thanks in advance

Hi Frank
What I was missing is that when a node is selected, a code from node details is setted as a parameter in the page, the page (outcome null in af:tree) is refreshed that will cause the ui's method binding to be executed again but after the parameter is setted. The ui's are built from the result a method that will get the corresponding java bean based on the parameter.
is this data queried by you or is it part of the tree node information or detail leafes?
They code is part of the tree node. It is setted into a page parameter. The ui's data is getted from a method (see below method iterator, methodaction from the page definition).
When you say data gets executed upon changing the tree row focus, what does this mean? Do you have a submit defined upon focus lost for the tree?
ui's binding is executed. The setter's are executed.
So what is the desired behavior you are looking for ?
The setter have to be executed before the java bean context is updated, i mean before the binding to the method action is executed
Actually i have, when i click on a node in a previously loaded page:
1) click on node
2) set the parameter from selected node
3) refresh the page
4) execute what we can name a java bean finder method (a java bean method that select a xml node in xml java bean using jxpath with a xpath expression that is executed from the method action in the page definition)
5) execute the setter from the binding (but into the wrong java bean because the method action change the java bean context)
In fact, 5) has to be executed before 4) is executed
That is my problem
af:tree code :
              <af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
                       var="node">
                <f:facet name="nodeStamp">
                  <h:panelGroup>
                    <af:commandLink text="#{node}">
                      <f:param name="selectedEntry"
                               value="#{node.classificationEntryCode}"/>
                    </af:commandLink>
                  </h:panelGroup>
                </f:facet>
              </af:tree>Page definition :
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
                version="10.1.3.39.84" id="untitled1PageDef"
                Package="view.pageDefs">
<parameters/>
<executables>
    <iterator id="ClassificationDocumentDataControl_rootIter" RangeSize="10"
              Binds="root" DataControl="ClassificationDocumentDataControl"/>
    <accessorIterator id="classificationIterator" RangeSize="10"
                      Binds="classification"
                      DataControl="ClassificationDocumentDataControl"
                      BeanClass="classification.testcase.castor.Classification"
                      MasterBinding="ClassificationDocumentDataControl_rootIter"/>
    <accessorIterator id="classificationEntryListIterator" RangeSize="10"
                      Binds="classificationEntryList"
                      DataControl="ClassificationDocumentDataControl"
                      BeanClass="classification.testcase.castor.ClassificationEntryList"
                      MasterBinding="classificationIterator"/>
    <accessorIterator id="classificationEntryIterator" RangeSize="10"
                      Binds="classificationEntry"
                      DataControl="ClassificationDocumentDataControl"
                      BeanClass="classification.testcase.castor.ClassificationEntry"
                      MasterBinding="classificationEntryListIterator"
                      Refresh="ifNeeded"/>
    <variableIterator id="variables"/>
    <methodIterator id="findClassificationEntryByIdentificationIter"
                    Binds="findClassificationEntryByIdentification.result"
                    DataControl="ClassificationDocumentDataControl"
                    RangeSize="10"
                    BeanClass="classification.testcase.castor.ClassificationEntry"/>
</executables>
<bindings>
    <tree id="ClassificationEntryListclassificationEntry"
          IterBinding="classificationEntryIterator">
      <AttrNames>
        <Item Value="classificationEntryCode"/>
        <Item Value="classificationEntryCount"/>
        <Item Value="valid"/>
      </AttrNames>
      <nodeDefinition DefName="classification.testcase.castor.ClassificationEntry"
                      id="ClassificationEntryNode">
        <AttrNames>
          <Item Value="classificationEntryCode"/>
        </AttrNames>
        <Accessors>
          <Item Value="classificationEntry"/>
        </Accessors>
      </nodeDefinition>
    </tree>
    <methodAction id="findClassificationEntryByIdentification"
                  InstanceName="ClassificationDocumentDataControl.dataProvider"
                  DataControl="ClassificationDocumentDataControl"
                  MethodName="findClassificationEntryByIdentification"
                  RequiresUpdateModel="true" Action="999"
                  IsViewObjectMethod="false"
                  ReturnName="ClassificationDocumentDataControl.methodResults.ClassificationDocumentDataControl_dataProvider_findClassificationEntryByIdentification_result">
      <NamedData NDName="entryIdentification"
                 NDValue="#{param.selectedEntry}"
                 NDType="java.lang.String"/>
    </methodAction>
    <attributeValues id="classificationEntryCode"
                     IterBinding="findClassificationEntryByIdentificationIter">
      <AttrNames>
        <Item Value="classificationEntryCode"/>
      </AttrNames>
    </attributeValues>
</bindings>
</pageDefinition>Hope it is a little bit more clear

Account Life cycle: Screen Control

Hi experts.
I want to:
Display additional assignment blocks that should only be available if the account is in a certain life cycle stage.
Hide assignment blocks that should not be available in certain life cycle stages.
I have implemented the Business Add-In (BAdI) BADI_CRM_BP_UIU_VIEWS from the enhancement spot CRM_UIU_BP_ENHANCEMENT with the filter value BP_HEAD as COMPONENT. Within the implementation of the interface method IF_UIU_BP_VIEWS~DETERMINE_VIEWS i want to evaluate the current life cycle stage, and the corresponding role exclusion group, by the current instance of the custom controller BP_HEAD/Lifecycle. The custom controller should be retrieved from the referenced view controller passed in the parameter IR_VIEW_CONTROLLER by calling GET_CUSTOM_CONTROLLER() and providing the custom controller name BP_HEAD/Lifecycle.
My problem is that I can´t locate the records containing current life cycle stage, and the corresponding role exclusion group.
Anybody can hel me?
Thanks in advance.
Paco.

Hi,
You can use two BADIs to achieve this either ORDER_SAVE(Implement the badi) and write ur ststus change code over here or
BADI - CRM_ORDER_STATUS(Implement the badi)
for status change use the below code to get it...
call function 'CRM_STATUS_CHANGE_EXTERN'
      exporting
        client              = sy-mandt
        objnr               = lv_order_guid
        user_status         = 'E0012'
        no_check            = 'X'
      exceptions
        object_not_found    = 1
        status_inconsistent = 2
        status_not_allowed = 3
        others              = 4.
    if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
hope this solves ur problem.
Regards
Jegadesh Balan T

What is step by step in real time project i.e. end-to-end life cycle?

what is step by step in real time project i.e. end-to-end life cycle?

Hi Vamsi,
The below explanation gives you an idea of what is going to come after what in a software development.
These below stages are know as Software Development Life Cycle/Waterfall Model.
1. System/Information Engineering and Modeling
As software is always of a large system (or business), work begins by establishing the requirements for all system elements and then allocating some subset of these requirements to software. This system view is essential when the software must interface with other elements such as hardware, people and other resources. System is the basic and very critical requirement for the existence of software in any entity. So if the system is not in place, the system should be engineered and put in place. In some cases, to extract the maximum output, the system should be re-engineered and spruced up. Once the ideal system is engineered or tuned, the development team studies the software requirement for the system.
2. Software Requirement Analysis
This process is also known as feasibility study. In this phase, the development team visits the customer and studies their system. They investigate the need for possible software automation in the given system. By the end of the feasibility study, the team furnishes a document that holds the different specific recommendations for the candidate system. It also includes the personnel assignments, costs, project schedule, target dates etc.... The requirement gathering process is intensified and focussed specially on software. To understand the nature of the program(s) to be built, the system engineer or "Analyst" must understand the information domain for the software, as well as required function, behavior, performance and interfacing. The essential purpose of this phase is to find the need and to define the problem that needs to be solved .
3. System Analysis and Design
In this phase, the software development process, the software's overall structure and its nuances are defined. In terms of the client/server technology, the number of tiers needed for the package architecture, the database design, the data structure design etc... are all defined in this phase. A software development model is thus created. Analysis and Design are very crucial in the whole development cycle. Any glitch in the design phase could be very expensive to solve in the later stage of the software development. Much care is taken during this phase. The logical system of the product is developed in this phase.
4. Code Generation
The design must be translated into a machine-readable form. The code generation step performs this task. If the design is performed in a detailed manner, code generation can be accomplished without much complication. Programming tools like compilers, interpreters, debuggers etc... are used to generate the code. Different high level programming languages like C, C++, Pascal, Java are used for coding. With respect to the type of application, the right programming language is chosen.
5. Testing
Once the code is generated, the software program testing begins. Different testing methodologies are available to unravel the bugs that were committed during the previous phases. Different testing tools and methodologies are already available. Some companies build their own testing tools that are tailor made for their own development operations.
6. Maintenance
The software will definitely undergo change once it is delivered to the customer. There can be many reasons for this change to occur. Change could happen because of some unexpected input values into the system. In addition, the changes in the system could directly affect the software operations. The software should be developed to accommodate changes that could happen during the post implementation period.
Reward if helpful.
Thankyou,
Regards.

Life cycle method logic

Similar Messages

Maybe you are looking for