Lightdm problems

Hey,
I like lightdm and gave it a shot. I encountered two problems that I couldn`t solve yet.
1    I use xfce4. When I click on logout - restart the system does not restart, it just brings me back to lightdm login screen.
2    On nearly every shutdown the system hangs at the following output:
    "A job is running for Light Display Manager"
    This hangs for a few minutes and then it continues shutting down correctly.
This is my config file /etc/lightdm/lightdm.conf
[LightDM]
run-directory=/run/lightdm
[SeatDefaults]
user-session=xfce4
session-wrapper=/etc/lightdm/xsession
greeter-setup-script=/usr/bin/x11vnc -auth /var/run/lightdm/root/:0 -noxrecord -noxfixes -noxdamage -rfbauth /home/tom/.vnc/passwd -forever -bg -rfbport 5900 -o /var/log/x11vnc.log
autologin-user=tom
autologin-user-timeout=0
pam-service=lightdm-autologin
[XDMCPServer]
[VNCServer]
Hope anyone can help me. If anything is needed please tell me how to get the info with the needed commands.
Thanks

Yes. Here;
https://bugs.archlinux.org/task/35345?p … &string=ht
https://wiki.archlinux.org/index.php/Li … ervice_way

Similar Messages

  • New install lightdm does not start

    I've installed arch and not much past that point.  After troubles with lightdm I installed gnome and used 'systemctl enable gdm' and gdm worked after my reboot.  Anyway, more info on my lightdm problem.
    Steps to install
    pacman -S lightdm
    pacman -S lightdm-gtk3-greeter
    systemctl enable lightdm
    reboot
    Upon reboot screen flashes a couple of times and then stops.
    I had installed xfce4 prior to this and made sure the xfce4.desktop file existed.  I've looked up other posts and I have not had look implementing their solutions.  Any ideas?
    DEBUG: Started session 395 with service 'lightdm-greeter', username 'lightdm'
    DEBUG: Session 395 authentication complete with return value 0: Success
    DEBUG: Greeter authorized
    DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
    DEBUG: Session 395 running command /usr/bin/lightdm-gtk-greeter
    DEBUG: Greeter closed communication channel
    DEBUG: Session 395 exited with return value 1
    DEBUG: Greeter quit
    DEBUG: Failed to start greeter

    My Lightdm stopped working a few days ago after an update.
    tschertel wrote:I've fixed it going to /var/lib then "chown lightdm.lightdm lightdm/"
    This doesn't work for me.
    [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
    [+0.00s] DEBUG: Starting Light Display Manager 1.6.1, UID=0 PID=1230
    [+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
    [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
    [+0.00s] DEBUG: Registered seat module xlocal
    [+0.00s] DEBUG: Registered seat module xremote
    [+0.00s] DEBUG: Adding default seat
    [+0.00s] DEBUG: Starting seat
    [+0.00s] DEBUG: Starting new display for greeter
    [+0.00s] DEBUG: Starting local X display
    [+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
    [+0.00s] DEBUG: Using VT 7
    [+0.00s] DEBUG: Activating VT 7
    [+0.01s] DEBUG: Logging to /var/log/lightdm/x-0.log
    [+0.01s] DEBUG: Writing X server authority to /run/lightdm/root/:0
    [+0.01s] DEBUG: Launching X Server
    [+0.01s] DEBUG: Launching process 1234: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
    [+0.01s] DEBUG: Waiting for ready signal from X server :0
    [+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
    [+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
    [+0.48s] DEBUG: Got signal 10 from process 1234
    [+0.48s] DEBUG: Got signal from X server :0
    [+0.48s] DEBUG: Connecting to XServer :0
    [+0.48s] DEBUG: Starting greeter
    [+0.49s] DEBUG: Started session 1241 with service 'lightdm-greeter', username 'lightdm'
    [+0.49s] DEBUG: Session 1241 authentication complete with return value 0: Success
    [+0.49s] DEBUG: Greeter authorized
    [+0.49s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
    [+0.49s] DEBUG: Session 1241 running command /usr/sbin/lightdm-gtk-greeter
    [+0.53s] DEBUG: Greeter connected version=1.6.1
    [+0.53s] DEBUG: Greeter connected, display is ready
    [+0.53s] DEBUG: New display ready, switching to it
    [+0.53s] DEBUG: Activating VT 7
    [+0.66s] DEBUG: Greeter start authentication for lipek
    [+0.66s] DEBUG: Started session 1261 with service 'lightdm', username 'lipek'
    [+0.67s] DEBUG: Session 1261 got 1 message(s) from PAM
    [+0.67s] DEBUG: Prompt greeter with 1 message(s)
    [+5.21s] DEBUG: Continue authentication
    [+5.24s] DEBUG: Session 1261 authentication complete with return value 0: Success
    [+5.24s] DEBUG: Authenticate result for user lipek: Success
    [+5.24s] DEBUG: User lipek authorized
    [+5.24s] DEBUG: Greeter sets language pl_PL.utf8
    [+5.25s] DEBUG: Greeter requests session gnome
    [+5.25s] DEBUG: Using session gnome
    [+5.25s] DEBUG: Stopping greeter
    [+5.25s] DEBUG: Session 1241: Sending SIGTERM
    [+5.25s] DEBUG: Greeter closed communication channel
    [+5.25s] DEBUG: Session 1241 exited with return value 0
    [+5.25s] DEBUG: Greeter quit
    [+5.26s] DEBUG: Dropping privileges to uid 1000
    [+5.26s] DEBUG: Calling setresgid
    [+5.26s] DEBUG: Calling setresuid
    [+5.26s] DEBUG: Restoring privileges
    [+5.26s] DEBUG: Calling setresuid
    [+5.26s] DEBUG: Calling setresgid
    [+5.26s] DEBUG: Dropping privileges to uid 1000
    [+5.26s] DEBUG: Calling setresgid
    [+5.26s] DEBUG: Calling setresuid
    [+5.26s] DEBUG: Writing /home/lipek/.dmrc
    [+5.33s] DEBUG: Restoring privileges
    [+5.33s] DEBUG: Calling setresuid
    [+5.33s] DEBUG: Calling setresgid
    [+5.36s] DEBUG: Starting session gnome as user lipek
    [+5.36s] DEBUG: Session 1261 running command /etc/lightdm/xsession gnome-session
    [+5.38s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
    [+5.38s] DEBUG: Session 1261 exited with return value 0
    [+5.38s] DEBUG: User session quit
    [+5.38s] DEBUG: Stopping display
    [+5.38s] DEBUG: Sending signal 15 to process 1234
    [+5.77s] DEBUG: Process 1234 exited with return value 0
    [+5.77s] DEBUG: X server stopped
    [+5.77s] DEBUG: Removing X server authority /run/lightdm/root/:0
    [+5.77s] DEBUG: Releasing VT 7
    [+5.77s] DEBUG: Display server stopped
    [+5.77s] DEBUG: Switching to greeter
    [+5.77s] DEBUG: Starting new display for greeter
    [+5.77s] DEBUG: Starting local X display
    [+5.77s] DEBUG: Using VT 7
    [+5.77s] DEBUG: Logging to /var/log/lightdm/x-0.log
    [+5.77s] DEBUG: Writing X server authority to /run/lightdm/root/:0
    [+5.77s] DEBUG: Launching X Server
    [+5.77s] DEBUG: Launching process 1271: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
    [+5.77s] DEBUG: Waiting for ready signal from X server :0
    [+6.22s] DEBUG: Got signal 10 from process 1271
    [+6.22s] DEBUG: Got signal from X server :0
    [+6.22s] DEBUG: Connecting to XServer :0
    [+6.22s] DEBUG: Starting greeter
    [+6.22s] DEBUG: Started session 1276 with service 'lightdm-greeter', username 'lightdm'
    [+6.22s] DEBUG: Session 1276 authentication complete with return value 0: Success
    [+6.22s] DEBUG: Greeter authorized
    [+6.22s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
    [+6.22s] DEBUG: Session 1276 running command /usr/sbin/lightdm-gtk-greeter
    [+6.26s] DEBUG: Greeter connected version=1.6.1
    [+6.26s] DEBUG: Greeter connected, display is ready
    [+6.26s] DEBUG: New display ready, switching to it
    [+6.26s] DEBUG: Activating VT 7
    [+6.40s] DEBUG: Greeter start authentication for lipek
    [+6.40s] DEBUG: Started session 1296 with service 'lightdm', username 'lipek'
    [+6.40s] DEBUG: Session 1296 got 1 message(s) from PAM
    [+6.40s] DEBUG: Prompt greeter with 1 message(s)
    ** (process:1276): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
    (lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:18: Not using units is deprecated. Assuming 'px'.
    (lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:20: Not using units is deprecated. Assuming 'px'.
    ** (lightdm-gtk-greeter:1278): WARNING **: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
    ** (lightdm-gtk-greeter:1278): WARNING **: Failed to load user image: Failed to open file '/home/lipek/.face': Permission denied
    ** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
    ** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
    ** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
    ** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
    ** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
    ** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
    (lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
    Any ideas?
    Last edited by LiPeK (2013-09-13 21:55:51)

  • Problem with lightdm and multiseat

    Hi everybody,
    so I'm trying to setup a multiseat desktop but I'm completely stuck.
    I've followed the wiki for the part regarding xorg.conf and tried to grab from the internet the part for lightdm.conf.
    Btw what happens is that the computer starts and give me two login screen on both monitor.
    In each of the screen the input devices are correct.
    The problem is that I cant access, namely if I put the password the screen becomes black and brings me back to the login screen.
    So I've tried to start manually with
    X -layout seat{0|1}
    and the screen becomes black.
    So I cannot understand if the problem is in xorg.conf or in lightdm.conf.
    Here xorg.conf:
    Section "ServerFlags"
    #Option "AutoAddDevices" "false"
    #Option "AutoEnableDevices" "false"
    Option "AllowMouseOpenFail" "on"
    #Option "AllowEmptyInput" "on"
    #Option "ZapWarning" "on"
    #Option "HandleSpecialKeys" "off" # Zapping on
    #Option "DRI2" "on"
    Option "Xinerama" "false"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "evdev"
    Option "Device" "/dev/input/by-id/usb-04d9_2517-event-kbd"
    Option "XkbRules" "xorg"
    EndSection
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "evdev"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/by-id/usb-04d9_2517-if01-event-mouse"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "evdev"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd"
    Option "XkbRules" "xorg"
    EndSection
    Section "InputDevice"
    Identifier "mouse0"
    Driver "evdev"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse"
    EndSection
    Section "Device"
    Identifier "nvidia0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 210"
    BusId "PCI:01:00:0"
    Option "NoLogo" "1"
    Option "ProbeAllGpus" "false"
    EndSection
    Section "Device"
    Identifier "nvidia1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 650"
    BusId "PCI:06:00:0"
    Option "NoLogo" "1"
    Option "ProbeAllGpus" "false"
    EndSection
    Section "Device"
    Identifier "nvidia1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 650"
    BusId "PCI:06:00:0"
    Option "NoLogo" "1"
    Option "ProbeAllGpus" "false"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Acer AL1916W"
    HorizSync 31.0 - 84.0
    VertRefresh 56.0 - 76.0
    Option "DPMS" "1"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "DELL U2412M"
    HorizSync 30.0 - 83.0
    VertRefresh 50.0 - 61.0
    Option "DPMS" "1"
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "nvidia1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "metamodes" "CRT: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "nvidia0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "metamodes" "nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "ServerLayout"
    Identifier "seat0"
    Screen "Screen0" 0 0
    InputDevice "mouse0" "CorePointer"
    InputDevice "keyboard0" "CoreKeyboard"
    Option "AutoAddDevices" "off"
    Option "Xinerama" "0"
    EndSection
    Section "ServerLayout"
    Identifier "seat1"
    Screen "Screen1" 0 0
    InputDevice "mouse1" "CorePointer"
    InputDevice "keyboard1" "CoreKeyboard"
    Option "AutoAddDevices" "off"
    Option "Xinerama" "0"
    EndSection
    and here's lightdm.conf
    [LightDM]
    #start-default-seat=true
    #greeter-user=lightdm
    #minimum-display-number=0
    minimum-vt=7
    #lock-memory=true
    #user-authority-in-system-dir=false
    #guest-account-script=guest-account
    log-directory=/var/log/lightdm
    run-directory=/run/lightdm
    #cache-directory=/var/cache/lightdm
    #xsessions-directory=/usr/share/xsessions
    #remote-sessions-directory=/usr/share/lightdm/remote-sessions
    #xgreeters-directory=/usr/share/xgreeters
    [SeatDefaults]
    #type=xlocal
    xserver-command=X
    #xserver-layout=
    #xserver-config=
    #xserver-allow-tcp=false
    #xdmcp-manager=
    #xdmcp-port=177
    #xdmcp-key=
    greeter-session=lightdm-gtk-greeter
    #greeter-hide-users=false
    #greeter-allow-guest=true
    #greeter-show-manual-login=false
    #greeter-show-remote-login=true
    #user-session=default
    #allow-guest=true
    #guest-session=UNIMPLEMENTED
    session-wrapper=/etc/lightdm/xsession
    #display-setup-script=
    #greeter-setup-script=
    #session-setup-script=
    #session-cleanup-script=
    #autologin-guest=false
    #autologin-user=
    #autologin-user-timeout=0
    #autologin-session=UNIMPLEMENTED
    pam-service=lightdm-autologin
    #exit-on-failure=false
    [Seat:0]
    xserver-command=/usr/bin/X
    xserver-layout=seat0
    [Seat:1]
    xserver-command=/usr/bin/X :1 -sharevts
    xserver-layout=seat1
    Thanks to who'll be able to help!

    scar wrote:
    If your lightdm install is a bit older, this can be related to recent changes in lightdm.
    See this:
    https://bbs.archlinux.org/viewtopic.php?id=169552
    In this case you can overwrite your /etc/lightdm.conf with /etc/lightdm.conf.pacnew, and re-configure it as you wish.
    If this was not the case, sorry. (But the symptoms are quite familiar to me)
    Thank you for your answer, that was part of the problem. Now I'm able to login but there's only one monitor working!
    Before there were two seats and I wasn't able to login, now there's only one and I'm able to login.
    Could it be a problem of the VGAs? Seems strange, I really think that I can't configure well lightdm, but if I want to install gdm it pulls all
    gnome-shell, and I use xfce..
    What a mess..

  • Lightdm, XFCE, Xscreenaver user switching problems

    I've  followed the wikis for xscreensaver and lightdm regarding user switching.  In fact, on one of my two arch installs, it works perfectly.  The other, I just get a flashing cursor at the top left of the screen that won't go away until I reboot (I haven't tried SSH, but it would probably work).
    Here is the relevant part of my ~/.xscreensaver:
    tail .xscreensaver
    pointerHysteresis: 10
    windowCreationTimeout:0:00:30
    initialDelay: 0:00:00
    GetViewPortIsFullOfLies:False
    procInterrupts: True
    xinputExtensionDev: False
    overlayStderr: True
    authWarningSlack: 20
    newLoginCommand: dm-tool switch-to-greeter
    Here is gdmflexiserver:
    #!/bin/sh
    /usr/bin/dm-tool switch-to-greeter
    and here are the perms for that file:
    -rwxr-xr-x 1 root root 46 Apr 24 19:37 gdmflexiserver
    I'm sure I just missed something simple, but I am blind to it.  Any help is appreciated.

    there's a new Xfce project for that http://goodies.xfce.org/projects/panel- … ch-plugin/

  • [Solved] Problem with upgrading polkit or filesystem

    Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
    A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit"  So I tried that a couple of times but I could never get pacman to finish and get past that.  I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it).  So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue.  Fast forward to today and I go to upgrade my system.  Among the 83 updates or so was polkit and filesystem.  What do you know it gets stuck at "(15/83) upgrading polkit".  Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem.  I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
    I tried re-installing polkit again and filesystem again but they continue to get stuck.  I cannot "complete" the upgrade even though they show the appropriate version when I check.
    Terminal
    [507] shauder@arch-desktop [~] $ sudo pacman -S polkit
    warning: polkit-0.107-4 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): polkit-0.107-4
    Total Installed Size: 1.77 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [########################################################] 100%
    (1/1) loading package files [########################################################] 100%
    (1/1) checking for file conflicts [########################################################] 100%
    (1/1) checking available disk space [########################################################] 100%
    (1/1) upgrading polkit
    /var/log/pacman.log
    [2012-07-18 18:27] installed filesystem (2012.6-4)
    [2012-07-18 18:27] installed findutils (4.4.2-4)
    [2012-07-18 18:27] installed gawk (4.0.1-1)
    [2012-07-18 18:27] installed gettext (0.18.1.1-4)
    [2012-07-18 18:27] installed grep (2.13-2)
    [2012-07-18 18:27] installed sed (4.2.1-4)
    [2012-07-18 18:27] installed grub (0.97-21)
    [2012-07-18 18:27] installed gzip (1.5-1)
    [2012-07-18 18:27] installed gdbm (1.10-1)
    [2012-07-18 18:27] installed perl (5.16.0-2)
    [2012-07-18 18:27] installed openssl (1.0.1.c-1)
    [2012-07-18 18:27] installed libsasl (2.1.23-9)
    [2012-07-18 18:27] installed libldap (2.4.31-4)
    [2012-07-18 18:27] installed keyutils (1.5.5-3)
    [2012-07-18 18:27] installed krb5 (1.10.2-2)
    [2012-07-18 18:27] installed heirloom-mailx (12.5-3)
    [2012-07-18 18:27] installed inetutils (1.9.1-2)
    [2012-07-18 18:27] installed iproute2 (3.4.0-2)
    [2012-07-18 18:27] installed sysvinit (2.88-6)
    [2012-07-18 18:27] installed initscripts (2012.06.3-2)
    [2012-07-18 18:27] installed sysfsutils (2.1.0-8)
    [2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
    [2012-07-18 18:27] installed iputils (20101006-4)
    [2012-07-18 18:27] installed jfsutils (1.1.15-3)
    [2012-07-18 18:27] installed less (444-3)
    [2012-07-18 18:27] installed licenses (2.9-1)
    [2012-07-18 18:27] installed linux-firmware (20120625-1)
    [2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
    [2012-07-18 18:27] installed expat (2.1.0-1)
    [2012-07-18 18:27] installed libarchive (3.0.4-1)
    [2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
    [2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
    [2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-18 18:27] ==> Building image from preset: 'default'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [autodetect]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] ==> Building image from preset: 'fallback'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] installed linux (3.4.5-1)
    [2012-07-18 18:27] installed logrotate (3.8.1-2)
    [2012-07-18 18:27] installed lvm2 (2.02.96-3)
    [2012-07-18 18:27] installed texinfo (4.13a-7)
    [2012-07-18 18:27] installed groff (1.21-2)
    [2012-07-18 18:27] installed libpipeline (1.2.1-1)
    [2012-07-18 18:27] it's recommended to create an initial
    [2012-07-18 18:27] database running as root:
    [2012-07-18 18:27] "/usr/bin/mandb --quiet"
    [2012-07-18 18:27] installed man-db (2.6.2-1)
    [2012-07-18 18:27] installed man-pages (3.41-1)
    [2012-07-18 18:27] installed mdadm (3.2.5-2)
    [2012-07-18 18:27] installed nano (2.2.6-2)
    [2012-07-18 18:27] installed ca-certificates (20120623-1)
    [2012-07-18 18:27] installed libssh2 (1.4.2-1)
    [2012-07-18 18:27] installed curl (7.26.0-1)
    [2012-07-18 18:27] installed pth (2.0.7-4)
    [2012-07-18 18:27] installed libksba (1.2.0-2)
    [2012-07-18 18:27] installed libassuan (2.0.3-1)
    [2012-07-18 18:27] installed pinentry (0.8.1-4)
    [2012-07-18 18:27] installed dirmngr (1.1.0-4)
    [2012-07-18 18:27] installed gnupg (2.0.19-2)
    [2012-07-18 18:27] installed gpgme (1.3.1-4)
    [2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
    [2012-07-18 18:27] installed archlinux-keyring (20120622-1)
    [2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
    [2012-07-18 18:27] >>> to import the data required by pacman for package verification.
    [2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
    [2012-07-18 18:27] installed pacman (4.0.3-3)
    [2012-07-18 18:27] installed pciutils (3.1.10-1)
    [2012-07-18 18:27] installed pcmciautils (018-4)
    [2012-07-18 18:27] installed libnl (3.2.11-1)
    [2012-07-18 18:27] installed libusbx (1.0.12-2)
    [2012-07-18 18:27] installed libpcap (1.3.0-1)
    [2012-07-18 18:27] installed ppp (2.4.5-3)
    [2012-07-18 18:27] installed procps-ng (3.3.3-3)
    [2012-07-18 18:27] installed psmisc (22.19-1)
    [2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
    [2012-07-18 18:27] installed shadow (4.1.5.1-1)
    [2012-07-18 18:27] installed eventlog (0.2.12-3)
    [2012-07-18 18:27] installed syslog-ng (3.3.5-2)
    [2012-07-18 18:27] installed tar (1.26-2)
    [2012-07-18 18:27] installed usbutils (006-1)
    [2012-07-18 18:27] installed vi (1:050325-2)
    [2012-07-18 18:27] installed wget (1.13.4-1)
    [2012-07-18 18:27] installed which (2.20-5)
    [2012-07-18 18:27] installed dbus-core (1.6.2-2)
    [2012-07-18 18:27] installed wpa_supplicant (1.0-1)
    [2012-07-18 18:27] installed xfsprogs (3.1.8-2)
    [2012-07-18 18:27] installed m4 (1.4.16-2)
    [2012-07-18 18:27] installed autoconf (2.69-1)
    [2012-07-18 18:27] installed automake (1.12.2-1)
    [2012-07-18 18:27] installed binutils (2.22-9)
    [2012-07-18 18:27] installed bison (2.5.1-1)
    [2012-07-18 18:27] installed fakeroot (1.18.4-1)
    [2012-07-18 18:27] installed flex (2.5.35-5)
    [2012-07-18 18:27] installed mpfr (3.1.1-1)
    [2012-07-18 18:27] installed libmpc (0.9-2)
    [2012-07-18 18:27] installed isl (0.10-1)
    [2012-07-18 18:27] installed cloog (0.17.0-2)
    [2012-07-18 18:27] installed ppl (1.0-1)
    [2012-07-18 18:27] installed gcc (4.7.1-4)
    [2012-07-18 18:27] installed libltdl (2.4.2-6)
    [2012-07-18 18:27] installed libtool (2.4.2-6)
    [2012-07-18 18:27] installed make (3.82-4)
    [2012-07-18 18:27] installed patch (2.6.1-3)
    [2012-07-18 18:27] installed pkg-config (0.27-1)
    [2012-07-18 18:37] Running 'pacman -Syy'
    [2012-07-18 18:37] synchronizing package lists
    [2012-07-18 18:38] Running 'pacman -Syy'
    [2012-07-18 18:38] synchronizing package lists
    [2012-07-18 18:39] Running 'pacman -S sudo'
    [2012-07-18 18:43] Running 'pacman -S sudo'
    [2012-07-18 18:44] Running 'pacman -S sudo'
    [2012-07-18 18:44] installed sudo (1.8.5.p2-1)
    [2012-07-18 18:45] Running 'pacman -S alsa-utils'
    [2012-07-18 18:46] installed alsa-lib (1.0.25-1)
    [2012-07-18 18:46] installed dialog (1.1_20120706-1)
    [2012-07-18 18:46] installed libogg (1.3.0-1)
    [2012-07-18 18:46] installed flac (1.2.1-3)
    [2012-07-18 18:46] installed libvorbis (1.3.3-1)
    [2012-07-18 18:46] installed libsndfile (1.0.25-2)
    [2012-07-18 18:46] installed libsamplerate (0.1.8-1)
    [2012-07-18 18:46] installed alsa-utils (1.0.25-3)
    [2012-07-18 18:46] Running 'pacman -S alsa-plugins'
    [2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
    [2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
    [2012-07-18 18:48] installed xproto (7.0.23-1)
    [2012-07-18 18:48] installed libxdmcp (1.1.1-1)
    [2012-07-18 18:48] installed freetype2 (2.4.10-1)
    [2012-07-18 18:48] installed libfontenc (1.1.1-1)
    [2012-07-18 18:48] installed fontsproto (2.1.2-1)
    [2012-07-18 18:48] installed libxfont (1.4.5-1)
    [2012-07-18 18:48] installed libpciaccess (0.13.1-1)
    [2012-07-18 18:48] installed libdrm (2.4.37-1)
    [2012-07-18 18:48] installed pixman (0.26.2-1)
    [2012-07-18 18:48] installed libxau (1.0.7-1)
    [2012-07-18 18:48] installed xcb-proto (1.7.1-1)
    [2012-07-18 18:48] installed libxcb (1.8.1-1)
    [2012-07-18 18:48] installed kbproto (1.0.6-1)
    [2012-07-18 18:48] installed libx11 (1.5.0-1)
    [2012-07-18 18:48] installed libxkbfile (1.0.8-1)
    [2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
    [2012-07-18 18:48] installed xkeyboard-config (2.6-1)
    [2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
    [2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
    [2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
    [2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
    [2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
    [2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
    [2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
    [2012-07-18 18:48] installed xorg-font-utils (7.6-3)
    [2012-07-18 18:48] updating font cache... done.
    [2012-07-18 18:48] installed fontconfig (2.8.0-2)
    [2012-07-18 18:49] Updating font cache... done.
    [2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
    [2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
    [2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
    [2012-07-18 18:49] installed xorg-server (1.12.3-1)
    [2012-07-18 18:49] installed xextproto (7.2.1-1)
    [2012-07-18 18:49] installed libxext (1.3.1-1)
    [2012-07-18 18:49] installed libice (1.0.8-1)
    [2012-07-18 18:49] installed libsm (1.2.1-1)
    [2012-07-18 18:49] installed libxt (1.1.3-1)
    [2012-07-18 18:49] installed libxmu (1.1.1-1)
    [2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
    [2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
    [2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
    [2012-07-18 18:49] installed renderproto (0.11.1-2)
    [2012-07-18 18:49] installed libxrender (0.9.7-1)
    [2012-07-18 18:49] installed randrproto (1.3.2-2)
    [2012-07-18 18:49] installed libxrandr (1.3.2-2)
    [2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
    [2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
    [2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
    [2012-07-18 18:49] installed inputproto (2.2-1)
    [2012-07-18 18:49] installed libxi (1.6.1-1)
    [2012-07-18 18:49] installed xineramaproto (1.2.1-2)
    [2012-07-18 18:49] installed libxinerama (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
    [2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
    [2012-07-18 18:49] installed mcpp (2.7.2-4)
    [2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
    [2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
    [2012-07-18 18:49] installed xorg-xset (1.2.2-1)
    [2012-07-18 18:49] installed fixesproto (5.0-2)
    [2012-07-18 18:49] installed libxfixes (5.0-2)
    [2012-07-18 18:49] installed libxcursor (1.1.13-1)
    [2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
    [2012-07-18 18:49] installed xorg-server-utils (7.6-3)
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
    [2012-07-18 18:51] installed videoproto (2.3.1-2)
    [2012-07-18 18:51] installed libxv (1.0.7-1)
    [2012-07-18 18:51] installed libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed nvidia-utils (302.17-1)
    [2012-07-18 18:51] In order to use nvidia module, reboot the system.
    [2012-07-18 18:51] installed nvidia (302.17-3)
    [2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
    [2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
    [2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
    [2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
    [2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
    [2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
    [2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
    [2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
    [2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
    [2012-07-18 18:55] installed xorg-twm (1.0.7-1)
    [2012-07-18 18:55] installed libxpm (3.5.10-1)
    [2012-07-18 18:55] installed libxaw (1.0.11-1)
    [2012-07-18 18:55] installed libxft (2.3.1-1)
    [2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
    [2012-07-18 18:55] installed xorg-luit (1.1.1-1)
    [2012-07-18 18:55] installed xbitmaps (1.1.1-2)
    [2012-07-18 18:55] installed xterm (281-1)
    [2012-07-18 18:55] Running 'pacman -S dbus'
    [2012-07-18 18:55] installed dbus (1.6.2-1)
    [2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
    [2012-07-18 18:56] installed ttf-dejavu (2.33-3)
    [2012-07-18 18:57] Running 'pacman -S awesome'
    [2012-07-18 18:57] installed libpng (1.5.11-1)
    [2012-07-18 18:57] installed cairo (1.12.2-2)
    [2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
    [2012-07-18 18:57] installed libtiff (4.0.2-1)
    [2012-07-18 18:57] installed giflib (4.1.6-5)
    [2012-07-18 18:57] installed libid3tag (0.15.1b-7)
    [2012-07-18 18:57] installed imlib2 (1.4.5-2)
    [2012-07-18 18:57] installed libev (4.11-1)
    [2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
    [2012-07-18 18:57] installed lua (5.1.5-2)
    [2012-07-18 18:57] installed libdatrie (0.2.5-1)
    [2012-07-18 18:57] installed libthai (0.1.17-1)
    [2012-07-18 18:57] installed pango (1.30.1-1)
    [2012-07-18 18:57] installed xcb-util (0.3.9-1)
    [2012-07-18 18:57] installed startup-notification (0.12-3)
    [2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
    [2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
    [2012-07-18 18:57] installed awesome (3.4.13-1)
    [2012-07-18 18:58] Running 'pacman -S rlwrap feh'
    [2012-07-18 18:58] installed rlwrap (0.37-2)
    [2012-07-18 18:58] installed giblib (1.2.4-5)
    [2012-07-18 18:58] installed libexif (0.6.20-2)
    [2012-07-18 18:58] installed feh (2.5-1)
    [2012-07-18 18:59] Running 'pacman -S packer'
    [2012-07-18 18:59] Running 'pacman -S lightdm'
    [2012-07-18 19:01] Running 'pacman -S fakeroot'
    [2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
    [2012-07-18 19:08] Running 'pacman -S git'
    [2012-07-18 19:08] installed perl-error (0.17018-1)
    [2012-07-18 19:08] installed git (1.7.11.2-1)
    [2012-07-18 19:08] Running 'pacman -S jshon'
    [2012-07-18 19:08] installed jansson (2.3-1)
    [2012-07-18 19:08] installed jshon (20111222-1)
    [2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
    [2012-07-18 19:08] installed packer (20120718-1)
    [2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
    [2012-07-18 19:10] installed polkit (0.105-1)
    [2012-07-18 19:10] installed accountsservice (0.6.22-1)
    [2012-07-18 19:10] installed dbus-glib (0.100-1)
    [2012-07-18 19:10] installed sqlite (3.7.13-1)
    [2012-07-18 19:10] installed python2 (2.7.3-2)
    [2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
    [2012-07-18 19:10] installed perl-xml-parser (2.41-3)
    [2012-07-18 19:10] installed intltool (0.50.2-1)
    [2012-07-18 19:10] installed libxml2 (2.7.8-2)
    [2012-07-18 19:10] installed itstool (1.1.2-1)
    [2012-07-18 19:10] installed iso-codes (3.34-1)
    [2012-07-18 19:10] installed libxklavier (5.2.1-2)
    [2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
    [2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
    [2012-07-18 19:14] installed lightdm (1.3.1-4)
    [2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
    [2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
    [2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
    [2012-07-18 19:15] installed bzr (2.5.1-1)
    [2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
    [2012-07-18 19:15] installed libxslt (1.1.26-3)
    [2012-07-18 19:15] installed docbook-xml (4.5-5)
    [2012-07-18 19:15] installed rarian (0.8.1-2)
    [2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
    [2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
    [2012-07-18 19:15] installed gtk-doc (1.18-1)
    [2012-07-18 19:15] installed atk (2.4.0-1)
    [2012-07-18 19:15] installed compositeproto (0.4.2-2)
    [2012-07-18 19:15] installed libxcomposite (0.4.3-2)
    [2012-07-18 19:15] installed damageproto (1.2.1-2)
    [2012-07-18 19:15] installed libxdamage (1.1.3-2)
    [2012-07-18 19:15] installed shared-mime-info (1.0-1)
    [2012-07-18 19:15] installed libtasn1 (2.13-1)
    [2012-07-18 19:15] installed nettle (2.5-1)
    [2012-07-18 19:15] installed p11-kit (0.12-1)
    [2012-07-18 19:15] installed gnutls (3.0.21-1)
    [2012-07-18 19:15] installed libdaemon (0.14-2)
    [2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
    [2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
    [2012-07-18 19:15] ==> dbus needs to be running when you start it.
    [2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
    [2012-07-18 19:15] ==> configuration on dhcp-less networks.
    [2012-07-18 19:15]
    [2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
    [2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
    [2012-07-18 19:15] ==> twisted for avahi-bookmarks.
    [2012-07-18 19:15] installed avahi (0.6.31-3)
    [2012-07-18 19:15] installed libcups (1.5.3-5)
    [2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
    [2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
    [2012-07-18 19:15] installed gtk2 (2.24.10-3)
    [2012-07-18 19:15] installed gtk-engines (2.21.0-1)
    [2012-07-18 19:15] installed icu (49.1.2-1)
    [2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
    [2012-07-18 19:15] installed orc (0.4.16-1)
    [2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
    [2012-07-18 19:15] installed libproxy (0.4.7-2)
    [2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-18 19:15] installed glib-networking (2.32.3-1)
    [2012-07-18 19:15] installed libsoup (2.38.1-1)
    [2012-07-18 19:15] ==> aspell comes with no default dictionary
    [2012-07-18 19:15] installed aspell (0.60.6.1-1)
    [2012-07-18 19:15] installed hunspell (1.3.2-1)
    [2012-07-18 19:15] installed hspell (1.1-2)
    [2012-07-18 19:15] installed enchant (1.6.0-4)
    [2012-07-18 19:15] installed geoclue (0.12.0-5)
    [2012-07-18 19:15] installed libwebkit (1.8.1-1)
    [2012-07-18 19:15] installed vala (0.16.1-1)
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:47] Running 'pacman -R lightdm'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:49] removed libwebkit (1.8.1-1)
    [2012-07-18 19:49] removed geoclue (0.12.0-5)
    [2012-07-18 19:49] removed enchant (1.6.0-4)
    [2012-07-18 19:49] userdel: user lightdm is currently used by process 657
    [2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
    [2012-07-18 19:49] removed lightdm (1.3.1-4)
    [2012-07-18 19:49] removed libxklavier (5.2.1-2)
    [2012-07-18 19:49] removed dbus-glib (0.100-1)
    [2012-07-18 19:49] removed accountsservice (0.6.22-1)
    [2012-07-18 19:50] Running 'pacman -S chromium'
    [2012-07-18 19:50] installed dbus-glib (0.100-1)
    [2012-07-18 19:50] installed nspr (4.9.1-1)
    [2012-07-18 19:50] installed nss (3.13.5-1)
    [2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
    [2012-07-18 19:50] installed libevent (2.0.19-1)
    [2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
    [2012-07-18 19:50] installed libxss (1.2.2-1)
    [2012-07-18 19:50] installed desktop-file-utils (0.20-1)
    [2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
    [2012-07-18 19:50] installed chromium (20.0.1132.57-1)
    [2012-07-18 19:50] Running 'pacman -Sy abs'
    [2012-07-18 19:50] synchronizing package lists
    [2012-07-18 19:51] installed rsync (3.0.9-3)
    [2012-07-18 19:51] installed abs (2.4.3-2)
    [2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
    [2012-07-18 19:53] installed ca-certificates-java (20120608-1)
    [2012-07-18 19:53] installed recordproto (1.14.2-1)
    [2012-07-18 19:53] installed libxtst (1.2.1-1)
    [2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
    [2012-07-18 19:53] done.
    [2012-07-18 19:53] when you use a non-reparenting window manager
    [2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-07-18 19:53] /etc/profile.d/openjdk6.sh
    [2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
    [2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
    [2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
    [2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
    [2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
    [2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
    [2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
    [2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
    [2012-07-18 19:53] installed gperf (3.0.4-4)
    [2012-07-18 19:53] installed zip (3.0-3)
    [2012-07-18 19:53] installed unzip (6.0-6)
    [2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
    [2012-07-18 19:53] installed lzo2 (2.06-1)
    [2012-07-18 19:53] installed squashfs-tools (4.2-2)
    [2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
    [2012-07-18 19:53] installed libusb-compat (0.1.4-2)
    [2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
    [2012-07-18 19:54] installed erlang (R15B01-1)
    [2012-07-18 19:54] installed sdl (1.2.15-1)
    [2012-07-18 19:54] installed dri2proto (2.6-1)
    [2012-07-18 19:54] installed glproto (1.4.15-1)
    [2012-07-18 19:54] installed mesa (8.0.4-1)
    [2012-07-18 19:54] installed esdl (2:1.2-1)
    [2012-07-18 19:54] installed schedtool (1.3.0-2)
    [2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed pngcrush (1.7.31-1)
    [2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed repo (1.17-1)
    [2012-07-18 19:59] Running 'pacman -S terminator'
    [2012-07-18 19:59] installed vte-common (0.32.2-1)
    [2012-07-18 19:59] installed vte (0.28.2-3)
    [2012-07-18 19:59] installed libglade (2.6.4-3)
    [2012-07-18 19:59] installed python2-cairo (1.10.0-1)
    [2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
    [2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
    [2012-07-18 19:59] installed pygtk (2.24.0-3)
    [2012-07-18 19:59] installed terminator (0.96-1)
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:01] removed gcc-libs (4.7.1-4)
    [2012-07-18 20:01] removed binutils (2.22-9)
    [2012-07-18 20:01] removed gcc (4.7.1-4)
    [2012-07-18 20:01] removed libtool (2.4.2-6)
    [2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
    [2012-07-18 20:01] installed binutils-multilib (2.22-8)
    [2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
    [2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
    [2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
    [2012-07-18 20:01] installed lib32-ncurses (5.9-1)
    [2012-07-18 20:01] installed lib32-readline (6.2.003-1)
    [2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 20:07] Running 'pacman -S ssh'
    [2012-07-18 20:10] Running 'pacman -S ssh-keygen'
    [2012-07-18 20:10] Running 'pacman -S openssh'
    [2012-07-18 20:10] installed libedit (20120311_3.0-1)
    [2012-07-18 20:10] installed dnssec-anchors (20120422-1)
    [2012-07-18 20:10] installed ldns (1.6.13-1)
    [2012-07-18 20:10] installed openssh (6.0p1-3)
    [2012-07-18 20:11] Running 'pacman -S pbcopy'
    [2012-07-18 20:11] Running 'pacman -S copy'
    [2012-07-18 20:13] Running 'pacman -S gedit'
    [2012-07-18 20:13] installed lcms2 (2.3-2)
    [2012-07-18 20:13] installed libgusb (0.1.3-1)
    [2012-07-18 20:13] installed gd (2.0.36RC1-5)
    [2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
    [2012-07-18 20:13] installed libieee1284 (0.2.11-4)
    [2012-07-18 20:13] installed v4l-utils (0.8.8-1)
    [2012-07-18 20:13] installed net-snmp (5.7.1-3)
    [2012-07-18 20:13] NOTE
    [2012-07-18 20:13] ----
    [2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
    [2012-07-18 20:13] installed sane (1.0.22-9)
    [2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
    [2012-07-18 20:13] installed colord (0.1.21-2)
    [2012-07-18 20:13] installed gtk3 (3.4.3-1)
    [2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
    [2012-07-18 20:13] installed libpeas (1.4.0-2)
    [2012-07-18 20:13] installed enchant (1.6.0-4)
    [2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
    [2012-07-18 20:13] installed python2-gobject (3.2.2-1)
    [2012-07-18 20:13] installed dconf (0.12.1-2)
    [2012-07-18 20:13] installed gedit (3.4.2-1)
    [2012-07-18 20:15] Running 'pacman -S python'
    [2012-07-18 20:16] installed python (3.2.3-3)
    [2012-07-18 20:26] Running 'pacman -S xclip'
    [2012-07-18 20:26] installed xclip (0.12-3)
    [2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
    [2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
    [2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
    [2012-07-18 20:37] installed openal (1.14-1)
    [2012-07-18 20:37] installed lib32-openal (1.14-1)
    [2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
    [2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
    [2012-07-18 20:37] installed swt (3.7.2-1)
    [2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:50] The android group has been removed, install android packages as root.
    [2012-07-18 20:50] installed android-sdk (r20-2)
    [2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:54] The android group has been removed, install android packages as root.
    [2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
    [2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
    [2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
    [2012-07-18 21:10] Running 'pacman -S perl-switch'
    [2012-07-18 21:10] installed perl-switch (2.16-1)
    [2012-07-21 03:29] Running 'pacman -S flashplugin'
    [2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
    [2012-07-21 03:29] installed mozilla-common (1.4-3)
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
    [2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
    [2012-07-21 03:32] Running 'pacman -S libvdpau'
    [2012-07-21 03:32] installed libvdpau (0.4.1-2)
    [2012-07-21 14:53] Running 'pacman -S gedit-common'
    [2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
    [2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:00] Running 'pacman -S gtk-icons'
    [2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
    [2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
    [2012-07-21 15:06] removed gedit (3.4.2-1)
    [2012-07-21 15:06] removed python2-gobject (3.2.2-1)
    [2012-07-21 15:06] removed libpeas (1.4.0-2)
    [2012-07-21 15:06] removed iso-codes (3.34-1)
    [2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
    [2012-07-21 15:06] removed enchant (1.6.0-4)
    [2012-07-21 15:06] removed dconf (0.12.1-2)
    [2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] removed libsoup (2.38.1-1)
    [2012-07-21 15:06] removed glib-networking (2.32.3-1)
    [2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-21 15:07] Running 'pacman -R wxgtk'
    [2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
    [2012-07-21 15:07] Running 'pacman -R libxt libsm'
    [2012-07-21 15:11] Running 'pacman -S ranger'
    [2012-07-21 15:11] installed ranger (1.5.4-1)
    [2012-07-21 15:32] Running 'pacman -S irssi'
    [2012-07-21 15:32] installed irssi (0.8.15-6)
    [2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
    [2012-07-24 20:20] installed sublime-text (2.0.1-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
    [2012-07-24 23:41] installed dropbox (1.4.11-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
    [2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
    [2012-07-24 23:41] installed dropbox-daemon (0.8-8)
    [2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
    [2012-07-24 23:48] installed dropbox-cli (1-12)
    [2012-07-24 23:49] Running 'pacman -S nautilus'
    [2012-07-24 23:56] Running 'pacman -S ranger'
    [2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman -Sy'
    [2012-07-25 00:23] synchronizing package lists
    [2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:25] installed gconf (3.2.5-2)
    [2012-07-25 00:25] installed libmng (1.0.10-4)
    [2012-07-25 00:25] installed qt (4.8.2-3)
    [2012-07-25 00:25] installed qtwebkit (2.2.2-1)
    [2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
    [2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:28] installed libpng12 (1.2.49-1)
    [2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:31] installed spotify (0.8.4.103-1)
    [2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman -Syy'
    [2012-07-29 16:58] synchronizing package lists
    [2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 17:00] installed gsm (1.0.13-7)
    [2012-07-29 17:00] installed lame (3.99.5-1)
    [2012-07-29 17:00] installed libasyncns (0.8-4)
    [2012-07-29 17:00] installed json-c (0.9-1)
    [2012-07-29 17:00] installed libpulse (2.1-1)
    [2012-07-29 17:00] installed libtheora (1.1.1-2)
    [2012-07-29 17:00] installed libglapi (8.0.4-2)
    [2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
    [2012-07-29 17:00] installed libegl (8.0.4-2)
    [2012-07-29 17:00] installed libva (1.1.0-1)
    [2012-07-29 17:00] installed libvpx (1.1.0-1)
    [2012-07-29 17:00] installed opencore-amr (0.1.3-1)
    [2012-07-29 17:00] installed openjpeg (1.5.0-1)
    [2012-07-29 17:00] installed rtmpdump (2.4-1)
    [2012-07-29 17:00] installed schroedinger (1.0.11-1)
    [2012-07-29 17:00] installed speex (1.2rc1-2)
    [2012-07-29 17:00] installed x264 (20120705-1)
    [2012-07-29 17:00] installed xvidcore (1.3.2-1)
    [2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
    [2012-07-29 17:00] installed libmms (0.6.2-1)
    [2012-07-29 17:00] installed libzen (0.4.26-1)
    [2012-07-29 17:00] installed libmediainfo (0.7.58-1)
    [2012-07-29 17:00] installed recode (3.6-7)
    [2012-07-29 17:00] installed enca (1.13-2)
    [2012-07-29 17:00] installed a52dec (0.7.4-6)
    [2012-07-29 17:00] installed libdca (0.0.5-3)
    [2012-07-29 17:00] installed talloc (2.0.7-1)
    [2012-07-29 17:00] installed libwbclient (3.6.6-1)
    [2012-07-29 17:00] installed libcap-ng (0.6.6-1)
    [2012-07-29 17:00] installed cifs-utils (5.5-1)
    [2012-07-29 17:00] installed tdb (1.2.9-2)
    [2012-07-29 17:00] installed smbclient (3.6.6-1)
    [2012-07-29 17:00] installed libmad (0.15.1b-6)
    [2012-07-29 17:00] installed fribidi (0.19.2-2)
    [2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
    [2012-07-29 17:00] installed faac (1.28-4)
    [2012-07-29 17:00] installed faad2 (2.7-3)
    [2012-07-29 17:00] installed mpg123 (1.14.4-1)
    [2012-07-29 17:00] installed libass (0.10.0-3)
    [2012-07-29 17:00] installed libbluray (0.2.2-1)
    [2012-07-29 17:00] installed libcddb (1.3.2-3)
    [2012-07-29 17:00] installed libcdio (0.83-1)
    [2012-07-29 17:00] installed mencoder (35014-1)
    [2012-07-29 17:00] installed libftdi (0.20-1)
    [2012-07-29 17:00] installed libirman (0.4.5-3)
    [2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
    [2012-07-29 17:00] installed gpm (1.20.6-10)
    [2012-07-29 17:00] installed aalib (1.4rc5-9)
    [2012-07-29 17:00] installed jack (0.121.3-6)
    [2012-07-29 17:00] installed libcaca (0.99.beta18-1)
    [2012-07-29 17:00] installed xf86dgaproto (2.1-2)
    [2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
    [2012-07-29 17:00] installed mplayer (35014-1)
    [2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
    [2012-07-29 17:00] installed pms (1.60.0-1)
    [2012-07-29 17:20] Running 'pacman -S netstat'
    [2012-07-29 17:31] Running 'pacman -S ntfs-3g'
    [2012-07-29 17:31] installed fuse (2.9.0-1)
    [2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
    [2012-07-29 17:45] Running 'pacman -S tsmuxer'
    [2012-07-29 17:45] Running 'pacman -S tsMuxeR'
    [2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
    [2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
    [2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
    [2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
    [2012-07-29 17:48] The tsmuxer package is licensed software.
    [2012-07-29 17:48] You MUST read and agree to the license stored in
    [2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
    [2012-07-29 17:48] installed tsmuxer (1.10.6-12)
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
    [2012-07-29 18:24] Running 'pacman -S openjre'
    [2012-07-29 18:25] Running 'pacman -S jre'
    [2012-07-29 18:25] Running 'pacman -S icetea-plugin'
    [2012-07-29 18:27] Running 'pacman -S icedtea-web'
    [2012-07-29 18:27] installed icedtea-web (1.2-1)
    [2012-07-29 18:35] Running 'pacman -S ccache'
    [2012-07-29 18:35] installed ccache (3.1.7-1)
    [2012-07-29 18:50] Running 'pacman -S rtorrent'
    [2012-07-29 18:50] installed libsigc++ (2.2.10-2)
    [2012-07-29 18:50] installed libtorrent (0.13.2-2)
    [2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
    [2012-07-29 18:50] installed rtorrent (0.9.2-2)
    [2012-07-29 18:52] Running 'pacman -S rutorrent'
    [2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
    [2012-07-29 18:52] installed php (5.4.5-1)
    [2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 18:53] installed rutorrent (3.4-2)
    [2012-07-29 18:53] Running 'pacman -R rtorrent'
    [2012-07-29 18:53] removed rtorrent (0.9.2-2)
    [2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
    [2012-07-29 18:54] Running 'pacman -S rtorrent'
    [2012-07-29 18:54] installed rtorrent (0.9.2-2)
    [2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
    [2012-07-29 18:55] installed apr (1.4.6-1)
    [2012-07-29 18:55] installed unixodbc (2.3.1-1)
    [2012-07-29 18:55] installed apr-util (1.4.1-1)
    [2012-07-29 18:55] installed apache (2.2.22-4)
    [2012-07-29 18:55] installed php-apache (5.4.5-1)
    [2012-07-29 18:55] installed php-cgi (5.4.5-1)
    [2012-07-29 18:55] installed php-xsl (5.4.5-1)
    [2012-07-29 18:55] installed geoip-database (20120706-1)
    [2012-07-29 18:55] installed geoip (1.4.8-2)
    [2012-07-29 18:55] installed php-geoip (1.0.8-2)
    [2012-07-29 18:55] installed screen (4.0.3-13)
    [2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
    [2012-07-29 19:03] installed mod_scgi (1.14-1)
    [2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
    [2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
    [2012-07-29 19:46] Running 'pacman -S unrar unzip'
    [2012-07-29 19:46] installed unrar (4.2.4-1)
    [2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
    [2012-07-29 20:00] Running 'pacman -S php-apache mysql'
    [2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
    [2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
    [2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
    [2012-07-29 20:02] Installing MySQL system tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02] Filling help tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02]
    [2012-07-29 20:02] To start mysqld at boot time you have to copy
    [2012-07-29 20:02] support-files/mysql.server to the right place for your system
    [2012-07-29 20:02]
    [2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    [2012-07-29 20:02] To do so, start the server, then issue the following commands:
    [2012-07-29 20:02]
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
    [2012-07-29 20:02]
    [2012-07-29 20:02] Alternatively you can run:
    [2012-07-29 20:02] /usr/bin/mysql_secure_installation
    [2012-07-29 20:02]
    [2012-07-29 20:02] which will also give you the option of removing the test
    [2012-07-29 20:02] databases and anonymous user created by default. This is
    [2012-07-29 20:02] strongly recommended for production servers.
    [2012-07-29 20:02]
    [2012-07-29 20:02] See the manual for more instructions.
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can start the MySQL daemon with:
    [2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
    [2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
    [2012-07-29 20:02]
    [2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
    [2012-07-29 20:02]
    [2012-07-29 20:02] installed mysql (5.5.25.a-1)
    [2012-07-29 20:49] Running 'pacman -Syyu'
    [2012-07-29 20:49] synchronizing package lists
    [2012-07-29 20:50] starting full system upgrade
    [2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
    [2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
    [2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
    [2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
    [2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
    [2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
    [2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
    [2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
    [2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
    [2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
    [2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
    [2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
    [2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
    [2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
    [2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
    [2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
    [2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
    [2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
    [2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
    [2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
    [2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-29 20:52] ==> Building image from preset: 'default'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [autodetect]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] ==> Building image from preset: 'fallback'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
    [2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
    [2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
    [2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
    [2012-08-03 12:40] Running 'pacman -S filezilla'
    [2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
    [2012-08-03 12:40] installed libidn (1.25-1)
    [2012-08-03 12:40] installed filezilla (3.5.3-1)
    [2012-08-06 13:55] Running 'pacman -R openjdk'
    [2012-08-06 13:55] Running 'pacman -R openjdk6'
    [2012-08-06 13:55] Running 'pacman -R icedtea-web'
    [2012-08-06 13:55] removed icedtea-web (1.2-1)
    [2012-08-06 13:56] Running 'pacman -S jdk'
    [2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
    [2012-08-06 13:58]
    [2012-08-06 13:58] The jre package is licensed software.
    [2012-08-06 13:58] You MUST read and agree to the license stored in
    [2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
    [2012-08-06 13:58] Please relogin to include jre in your PATH.
    [2012-08-06 13:58]
    [2012-08-06 13:58] installed jre (7.5-2)
    [2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 14:01]
    [2012-08-06 14:01] The jdk package is licensed software.
    [2012-08-06 14:01] You MUST read and agree to the license stored in
    [2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
    [2012-08-06 14:01] Please relogin to include jdk in your PATH.
    [2012-08-06 14:01]
    [2012-08-06 14:01] installed jdk (7.5-2)
    [2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:15] Running 'pacman -R jdk jre'
    [2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
    [2012-08-06 14:17] removed jdk (7.5-2)
    [2012-08-06 14:17] removed jre (7.5-2)
    [2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:19] The jre package is licensed software.
    [2012-08-06 14:19] You MUST read and agree to the license stored in
    [2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
    [2012-08-06 14:19] Please relogin to include jre in your PATH.
    [2012-08-06 14:19] installed jre6 (6u33-b04)
    [2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:21] The jdk package is licensed software.
    [2012-08-06 14:21] You MUST read and agree to the license stored in
    [2012-08-06 14:21] /opt/java/LICENSE before using it.
    [2012-08-06 14:21] Please relogin to include jdk in your PATH
    [2012-08-06 14:21] installed jdk6 (6u33-b04)
    [2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
    [2012-08-06 17:23] Running 'pacman -S gimp'
    [2012-08-06 17:23] installed lcms (1.19-2)
    [2012-08-06 17:23] Updating font cache... done.
    [2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
    [2012-08-06 17:23] installed libwmf (0.2.8.4-9)
    [2012-08-06 17:23] installed libcroco (0.6.5-1)
    [2012-08-06 17:23] installed librsvg (2.36.1-1)
    [2012-08-06 17:23] installed babl (0.1.10-1)
    [2012-08-06 17:23] installed gegl (0.2.0-2)
    [2012-08-06 17:23] installed freeglut (2.8.0-1)
    [2012-08-06 17:23] installed jasper (1.900.1-7)
    [2012-08-06 17:23] installed gimp (2.8.0-2)
    [2012-08-06 18:25] Running 'pacman -Sy'
    [2012-08-06 18:25] synchronizing package lists
    [2012-08-06 18:25] Running 'pacman -S yaourt'
    [2012-08-06 18:28] Running 'pacman -Sy'
    [2012-08-06 18:28] synchronizing package lists
    [2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:29] Running 'pacman -Sy'
    [2012-08-06 18:29] synchronizing package lists
    [2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
    [2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
    [2012-08-06 21:51] removed jdk6 (6u33-b04)
    [2012-08-06 21:51] removed jre6 (6u33-b04)
    [2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
    [2012-08-06 21:54] The sun-java6 package is licensed software.
    [2012-08-06 21:54] You MUST read and agree to the license stored in
    [2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
    [2012-08-06 21:54]
    [2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
    [2012-08-06 21:54] installed sun-java6 (6u32-1)
    [2012-08-06 21:59] Running 'pacman -Syu'
    [2012-08-06 21:59] synchronizing package lists
    [2012-08-06 21:59] starting full system upgrade
    [2012-08-06 22:00] Running 'pacman -Sy'
    [2012-08-06 22:00] synchronizing package lists
    [2012-08-06 22:00] Running 'pacman -S yaourt'
    [2012-08-06 22:00] installed yajl (2.0.4-1)
    [2012-08-06 22:00] installed package-query (1.0.1-1)
    [2012-08-06 22:00] installed yaourt (1.1-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
    [2012-08-06 22:01] installed java-rhino (1.7R3-3)
    [2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
    [2012-08-06 22:01] when you use a non-reparenting window manager
    [2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-08-06 22:01] /etc/profile.d/jre.sh
    [2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:02] installed android-apktool (1.4.9-1)
    [2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-08-06 22:05] The android group has been removed, install android packages as root.
    [2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
    [2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
    [2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
    [2012-08-06 22:08] installed libmtp (1.1.3-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
    [2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
    [2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
    [2012-08-06 22:08] installed android-udev (1.3-4)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
    [2012-08-06 22:08] installed fastboot (20110628-2)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
    [2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
    [2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
    [2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
    [2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
    [2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
    [2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
    [2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
    [2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
    [2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
    [2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
    [2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
    [2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
    [2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
    [2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
    [2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
    [2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
    [2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
    [2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
    [2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
    [2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
    [2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
    [2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
    [2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
    [2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
    [2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
    [2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
    [2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
    [2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
    [2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
    [2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-08-06 22:20] ==> Building image from preset: 'default'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [autodetect]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] ==> Building image from preset: 'fallback'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
    [2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
    [2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
    [2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
    [2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
    [2012-08-06 22:23] Running 'pacman -S openjdk'
    [2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
    [2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
    [2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:25] Running 'pacman -R pms'
    [2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
    [2012-08-06 22:25] removed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:26] installed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -S vlc'
    [2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
    [2012-08-06 22:26] installed sdl_image (1.2.12-2)
    [2012-08-06 22:26] installed libdvdread (4.2.0-1)
    [2012-08-06 22:26] installed libdvdnav (4.2.0-2)
    [2012-08-06 22:26] installed libkate (0.4.1-3)
    [2012-08-06 22:26] installed libtiger (0.3.4-3)
    [2012-08-06 22:26] installed libebml (1.2.2-2)
    [2012-08-06 22:26] installed libmatroska (1.3.0-2)
    [2012-08-06 22:26] installed zvbi (0.2.33-4)
    [2012-08-06 22:26] installed taglib (1.7.2-2)
    [2012-08-06 22:26] installed libmpcdec (1.2.6-3)
    [2012-08-06 22:26] installed libupnp (1.6.17-1)
    [2012-08-06 22:26] installed libshout (1:2.3.0-1)
    [2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
    [2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
    [2012-08-06 22:26] installed ttf-freefont (20120503-1)
    [2012-08-06 22:26] installed vlc (2.0.3-2)
    [2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
    [2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
    [2012-08-07 11:44] installed pacman-color (4.0.3-1)
    [2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
    [2012-08-07 11:44] installed packer-color (20120807-1)
    [2012-08-07 11:50] Running 'pacman-color -S packer'
    [2012-08-07 15:50] Running 'pacman -Syyu'
    [2012-08-07 15:50] synchronizing package lists
    [2012-08-07 15:50] starting full system upgrade
    [2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
    [2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 16:02] Running 'pacman-color -S crontab'
    [2012-08-07 16:02] Running 'pacman-color -S cronjob'
    [2012-08-07 16:02] Running 'pacman-color -S cron'
    [2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
    [2012-08-07 16:04] Running 'pacman-color -S cronie'
    [2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
    [2012-08-07 16:05] installed libesmtp (1.0.6-2)
    [2012-08-07 16:05] installed esmtp (1.2-4)
    [2012-08-07 16:05] installed procmail (3.22-5)
    [2012-08-08 12:10] Running 'pacman -Sy'
    [2012-08-08 12:10] synchronizing package lists
    [2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -R pms'
    [2012-08-08 18:02] removed pms (1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -Sy'
    [2012-08-08 18:02] synchronizing package lists
    [2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 18:03] installed pms (1.60.0-2)
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
    [2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
    [2012-08-08 18:36] Running 'pacman -R pms'
    [2012-08-08 1

    shadowlurker wrote:
    It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
    auth sufficient pam_rootok.so
    auth required pam_unix.so
    account required pam_unix.so
    session required pam_unix.so
    password required pam_permit.so
    You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
    Doug piston had me try something that I think will help anyone else who has this problem.  Try re-installing pambase and shadow.  It generated back most of any I was missing.
    Last edited by shauder (2012-11-03 00:55:19)

  • [SOLVED]Problem with logging in after system upgrade

    Hi,
    I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
    What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
    What I have is arch on pendrive so I can chroot into existing system.
    Any ideas?
    Last edited by jakub (2014-10-08 22:09:02)

    I found something similar to line
    (EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
    these values are not exact as I'm too tired now to rewrite the real ones from screen 
    maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
    Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
    I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
    Last edited by jakub (2014-10-08 22:03:11)

  • Multiseat with Lightdm broken after updating Mesa

    Hi,
    I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
    I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
    In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
    The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
    My configuration is the following :
        - Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
        - Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
    I'm using Lightdm with this configuration:
    [LightDM]
    minimum-vt=1
    run-directory=/run/lightdm
    [SeatDefaults]
    greeter-session=lightdm-gtk-greeter
    greeter-show-manual-login=true
    session-wrapper=/etc/lightdm/Xsession
    greeter-setup-script=/usr/bin/numlockx on
    [Seat:0]
    xserver-command=/usr/bin/X :0 -sharevts
    xserver-layout=Layout-Main
    [Seat:1]
    xserver-command=/usr/bin/X :1 -sharevts -novtswitch
    xserver-layout=Layout-Aux
    The Xorg configuration for the seats is divided into two files:
    /etc/X11/xorg.conf.d/50-serverlayout-main.conf
    Section "ServerLayout"
    Identifier "Layout-Main"
    Screen "Screen-Main" 0 0
    InputDevice "Logitech-Illuminated" "CoreKeyboard"
    InputDevice "Logitech-G100S" "CorePointer"
    Option "AllowEmptyInput" "true"
    EndSection
    Section "InputDevice"
    Identifier "Logitech-G100S"
    Driver "evdev"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "Logitech-Illuminated"
    Driver "evdev"
    Option "XkbLayout" "fr"
    Option "XkbModel" "pc104"
    Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Samsung"
    ModelName "Samsung SyncMaster 2433"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Samsung"
    ModelName "Samsung SyncMaster 2333sw"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "NVIDIA-GTX760"
    Driver "nouveau"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 760"
    EndSection
    Section "Screen"
    Identifier "Screen-Main"
    Device "NVIDIA-GTX760"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /etc/X11/xorg.conf.d/51-serverlayout-aux.conf
    Section "ServerLayout"
    Identifier "Layout-Aux"
    Screen "Screen-Aux" 0 0
    InputDevice "K400r-keyboard" "CoreKeyboard"
    InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
    InputDevice "K400r-mouse" "CorePointer"
    Option "AllowEmptyInput" "true"
    EndSection
    Section "InputDevice"
    Identifier "K400r-mouse"
    Driver "evdev"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "K400r-keyboard"
    Driver "evdev"
    Option "XkbLayout" "fr"
    Option "XkbModel" "pc104"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "K400r-keyboard-multimedia"
    Driver "evdev"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
    Option "XkbModel" "evdev"
    Option "GrabDevice" "on"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Compaq"
    ModelName "Compaq Q2159"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Intel-I915"
    Driver "intel"
    VendorName "Intel"
    BoardName "Intel IGP"
    BusID "PCI:0:2:0"
    # Option "NoAccel" "True"
    # Option "DRI" "False"
    # Option "TearFree" "true"
    # Option "AccelMethod" "sna"
    EndSection
    Section "Screen"
    Identifier "Screen-Aux"
    Device "Intel-I915"
    Monitor "Monitor1"
    DefaultDepth 24
    EndSection
    When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
    # systemctl restart lightdm
    the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
    My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
    FYI, here's what I tried:
    - play with Intel drivers options in Xorg (NoAccel, DRI, ...)
    - play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
    - switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
    Here are the Xorg log files:
    Xorg.0.log
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 6.853] X Protocol Version 11, Revision 0
    [ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    [ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
    [ 6.854] Build Date: 21 September 2014 10:53:13AM
    [ 6.854]
    [ 6.854] Current version of pixman: 0.32.6
    [ 6.854] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
    [ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 6.857] (==) ServerLayout "Layout-Main"
    [ 6.857] (**) |-->Screen "Screen-Main" (0)
    [ 6.857] (**) | |-->Monitor "Monitor0"
    [ 6.857] (**) | |-->Device "NVIDIA-GTX760"
    [ 6.857] (**) |-->Input Device "Logitech-Illuminated"
    [ 6.857] (**) |-->Input Device "Logitech-G100S"
    [ 6.857] (==) Automatically adding devices
    [ 6.857] (==) Automatically enabling devices
    [ 6.857] (==) Automatically adding GPU devices
    [ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 6.858] Entry deleted from font path.
    [ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 6.860] Entry deleted from font path.
    [ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 6.860] Entry deleted from font path.
    [ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 6.860] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 6.860] (II) Loader magic: 0x818d80
    [ 6.860] (II) Module ABI versions:
    [ 6.860] X.Org ANSI C Emulation: 0.4
    [ 6.860] X.Org Video Driver: 18.0
    [ 6.860] X.Org XInput driver : 21.0
    [ 6.860] X.Org Server Extension : 8.0
    [ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
    [ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
    [ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 6.862] (II) LoadModule: "glx"
    [ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.873] (II) Module glx: vendor="X.Org Foundation"
    [ 6.873] compiled for 1.16.1, module version = 1.0.0
    [ 6.873] ABI class: X.Org Server Extension, version 8.0
    [ 6.873] (==) AIGLX enabled
    [ 6.873] (II) LoadModule: "nouveau"
    [ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
    [ 6.875] compiled for 1.16.1, module version = 1.0.11
    [ 6.875] Module class: X.Org Video Driver
    [ 6.875] ABI class: X.Org Video Driver, version 18.0
    [ 6.875] (II) LoadModule: "evdev"
    [ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.877] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.877] compiled for 1.16.0, module version = 2.9.0
    [ 6.877] Module class: X.Org XInput Driver
    [ 6.877] ABI class: X.Org XInput driver, version 21.0
    [ 6.877] (II) NOUVEAU driver
    [ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 6.877] RIVA TNT (NV04)
    [ 6.877] RIVA TNT2 (NV05)
    [ 6.877] GeForce 256 (NV10)
    [ 6.877] GeForce 2 (NV11, NV15)
    [ 6.877] GeForce 4MX (NV17, NV18)
    [ 6.877] GeForce 3 (NV20)
    [ 6.877] GeForce 4Ti (NV25, NV28)
    [ 6.878] GeForce FX (NV3x)
    [ 6.878] GeForce 6 (NV4x)
    [ 6.878] GeForce 7 (G7x)
    [ 6.878] GeForce 8 (G8x)
    [ 6.878] GeForce GTX 200 (NVA0)
    [ 6.878] GeForce GTX 400 (NVC0)
    [ 6.878] (++) using VT number 1
    [ 6.878] (II) [drm] nouveau interface version: 1.1.2
    [ 6.878] (II) Loading sub module "dri2"
    [ 6.878] (II) LoadModule: "dri2"
    [ 6.878] (II) Module "dri2" already built-in
    [ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
    [ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 6.878] (==) NOUVEAU(0): RGB weight 888
    [ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
    [ 6.878] (==) NOUVEAU(0): Using HW cursor
    [ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
    [ 6.878] (==) NOUVEAU(0): Page flipping enabled
    [ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
    [ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
    [ 6.878] (II) NOUVEAU(0): Initializing outputs ...
    [ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
    [ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
    [ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
    [ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
    [ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
    [ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
    [ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
    [ 7.134] (II) NOUVEAU(0): Digital Display Input
    [ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
    [ 7.134] (II) NOUVEAU(0): Gamma: 2.20
    [ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
    [ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
    [ 7.134] (II) NOUVEAU(0): Supported established timings:
    [ 7.134] (II) NOUVEAU(0): 640x480@60Hz
    [ 7.134] (II) NOUVEAU(0): 800x600@56Hz
    [ 7.134] (II) NOUVEAU(0): 800x600@60Hz
    [ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
    [ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 7.134] (II) NOUVEAU(0): Supported standard timings:
    [ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
    [ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 7.134] (II) NOUVEAU(0): EDID (in hex):
    [ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
    [ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
    [ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
    [ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
    [ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
    [ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
    [ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
    [ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
    [ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
    [ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
    [ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
    [ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
    [ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
    [ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
    [ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
    [ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
    [ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
    [ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
    [ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
    [ 7.164] (II) NOUVEAU(0): Digital Display Input
    [ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 7.164] (II) NOUVEAU(0): Gamma: 2.20
    [ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 7.164] (II) NOUVEAU(0): Supported established timings:
    [ 7.164] (II) NOUVEAU(0): 640x480@60Hz
    [ 7.164] (II) NOUVEAU(0): 800x600@56Hz
    [ 7.164] (II) NOUVEAU(0): 800x600@60Hz
    [ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
    [ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 7.164] (II) NOUVEAU(0): Supported standard timings:
    [ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 7.164] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
    [ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
    [ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
    [ 7.164] (II) NOUVEAU(0): EDID (in hex):
    [ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
    [ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
    [ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
    [ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
    [ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
    [ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
    [ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
    [ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
    [ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 7.270] (II) NOUVEAU(0): EDID for output DP-1
    [ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
    [ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
    [ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
    [ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
    [ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 7.270] (II) Loading sub module "fb"
    [ 7.270] (II) LoadModule: "fb"
    [ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7.272] (II) Module fb: vendor="X.Org Foundation"
    [ 7.272] compiled for 1.16.1, module version = 1.0.0
    [ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.272] (II) Loading sub module "shadowfb"
    [ 7.272] (II) LoadModule: "shadowfb"
    [ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 7.272] compiled for 1.16.1, module version = 1.0.0
    [ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.272] (--) Depth 24 pixmap format is 32 bpp
    [ 7.278] (II) NOUVEAU(0): Channel setup complete.
    [ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
    [ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 7.281] (II) Loading sub module "exa"
    [ 7.281] (II) LoadModule: "exa"
    [ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 7.281] (II) Module exa: vendor="X.Org Foundation"
    [ 7.281] compiled for 1.16.1, module version = 2.6.0
    [ 7.281] ABI class: X.Org Video Driver, version 18.0
    [ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 7.281] (II) EXA(0): Driver registered support for the following operations:
    [ 7.281] (II) Solid
    [ 7.281] (II) Copy
    [ 7.281] (II) Composite (RENDER acceleration)
    [ 7.281] (II) UploadToScreen
    [ 7.281] (II) DownloadFromScreen
    [ 7.281] (==) NOUVEAU(0): Backing store enabled
    [ 7.281] (==) NOUVEAU(0): Silken mouse enabled
    [ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 7.282] (**) NOUVEAU(0): DPMS enabled
    [ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7.282] (--) RandR disabled
    [ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
    [ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7.363] (II) AIGLX: Loaded and initialized nouveau
    [ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
    [ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 7.420] resize called 1920 1080
    [ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
    [ 7.445] (**) Option "CoreKeyboard"
    [ 7.445] (**) Logitech-Illuminated: always reports core events
    [ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
    [ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
    [ 7.503] (--) evdev: Logitech-Illuminated: Found keys
    [ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
    [ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
    [ 7.503] (**) Option "xkb_rules" "evdev"
    [ 7.503] (**) Option "xkb_model" "pc104"
    [ 7.503] (**) Option "xkb_layout" "fr"
    [ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
    [ 7.513] (**) Option "CorePointer"
    [ 7.513] (**) Logitech-G100S: always reports core events
    [ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
    [ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
    [ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
    [ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
    [ 7.583] (--) evdev: Logitech-G100S: Found relative axes
    [ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
    [ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
    [ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
    [ 7.583] (**) Option "Emulate3Buttons" "no"
    [ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
    [ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
    [ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
    [ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
    [ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
    [ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
    [ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
    [ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.584] (**) Power Button: always reports core events
    [ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.584] (--) evdev: Power Button: Found keys
    [ 7.584] (II) evdev: Power Button: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.584] (**) Video Bus: always reports core events
    [ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.584] (--) evdev: Video Bus: Found keys
    [ 7.584] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
    [ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.584] (**) Power Button: always reports core events
    [ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.584] (--) evdev: Power Button: Found keys
    [ 7.584] (II) evdev: Power Button: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
    [ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
    [ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
    [ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
    [ 7.586] (**) Option "xkb_rules" "evdev"
    [ 7.586] (**) Option "xkb_model" "pc104"
    [ 7.586] (**) Option "xkb_layout" "fr"
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
    [ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
    [ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
    [ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
    [ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
    [ 7.630] (II) UnloadModule: "evdev"
    [ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
    [ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
    [ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
    [ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
    [ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
    [ 7.630] (**) HD Webcam C525: always reports core events
    [ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
    [ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
    [ 7.630] (--) evdev: HD Webcam C525: Found keys
    [ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
    [ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
    [ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
    [ 7.630] (**) Option "xkb_rules" "evdev"
    [ 7.630] (**) Option "xkb_model" "pc104"
    [ 7.630] (**) Option "xkb_layout" "fr"
    [ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
    [ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
    [ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
    [ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
    [ 7.663] (II) UnloadModule: "evdev"
    [ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
    [ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
    [ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
    [ 7.663] (**) Option "xkb_rules" "evdev"
    [ 7.663] (**) Option "xkb_model" "pc104"
    [ 7.663] (**) Option "xkb_layout" "fr"
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
    [ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
    [ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
    [ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
    [ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
    [ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
    [ 7.690] (II) UnloadModule: "evdev"
    [ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 7.691] (II) No input driver specified, ignoring this device.
    [ 7.691] (II) This device may have been added with another device file.
    [ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 14.963] resize called 3840 1080
    [ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
    [ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
    [ 3613.557] (II) UnloadModule: "evdev"
    [ 3613.617] (II) config/udev: removing device HD Webcam C525
    [ 3613.647] (II) evdev: HD Webcam C525: Close
    [ 3613.647] (II) UnloadModule: "evdev"
    [ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
    [ 3614.988] (II) No input driver specified, ignoring this device.
    [ 3614.988] (II) This device may have been added with another device file.
    [ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
    [ 3614.988] (II) No input driver specified, ignoring this device.
    [ 3614.988] (II) This device may have been added with another device file.
    [ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
    [ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
    [ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
    [ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
    [ 3615.023] (II) UnloadModule: "evdev"
    [ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
    [ 3615.02

    shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
    management. It means LightDM van load seats automatically as they are added
    from logind.
    Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation

  • Lightdm and KDE shutdown, restart

    I use KDE and want to use fingerprint-gui to login. This isn't possible with kdm, so I ended up with lighdm. Login with fingerprint reader works, but with lightdm shutdown and restart buttons disappears from menu. After playing with lightdm from AUR, patches from fedora and another hints from internet I found solution.
    To get shutdown and restart buttons back you only need lightdm from community and consolekit-git from AUR.
    It would be useful to write a hint to package, but since consolekit is from AUR and deprecated, I don't know if it is good solution.
    Is there better solution to this problem?

    I found a better solution at the lightdm page on the wiki. All it requires is polkit from extra. See https://wiki.archlinux.org/index.php/Li … ff_etc..29

  • Tty display problems with nvidia and uvesafb

    I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
    The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
    In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
    Now, if possible, I need to use the actual console for the purposes of module development.
    I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
    The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
    How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
    I'm fairly certain there are no vga or video settings in GRUB that are interfering.

    Output of "pacman -Qi nvidia"
    Name : nvidia
    Version : 343.36-2
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
    Optional Deps : None
    Required By : None
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 5.30 MiB
    Packager : Felix Yan <[email protected]>
    Build Date : Thu 11 Dec 2014 08:32:19 AM CST
    Install Date : Fri 12 Dec 2014 12:10:32 AM CST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    Output "cat /boot/grub/grub.cfg"
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=green/black
    set menu_color_highlight=black/green
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    insmod png
    background_image -m stretch /boot/grub/archgrub.png
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Output "cat /usr/lib/modprobe.d/uvesafb.conf"
    Video mode is set as "1920x1080-32".
    # This file sets the parameters for uvesafb module.
    # The following format should be used:
    # options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
    # For more details see:
    # http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
    options uvesafb mode_option=1920x1080-32 scroll=ywrap
    This file is mirrored in /etc/modprobe.d/uvesafb.conf.
    Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
    Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
    ---edit---
    Output of "cat /etc/default/grub" in case it's helpful.
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    #GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="green/black"
    GRUB_COLOR_HIGHLIGHT="black/green"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    GRUB_BACKGROUND="/boot/grub/archgrub.png"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    Also, it might help to describe the behaviour more specifically / more in depth...
    The rendered part of the console occupies the same space as the GRUB boot menu.
    I installed and configured virtualbox a few weeks previously.
    I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
    It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
    That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
    I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
    I haven't rebooted until attempting to rectify the issue with my console.
    The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
    Killing X doesn't - obviously - have any effect on console scale.
    ---/edit---
    d(-_-)
    Last edited by seppukuzushi (2014-12-31 14:01:23)

  • Skype/Pulse audio problem only if auto started

    Hi,
    I've an Arch/XFCE laptop including pulse audio and Skype (configured to use the pulse audio).
    Skype has been configured  (using XFCE startup menu) to auto start during boot ( we boot daily), and, till about 2 weeks ago, worked fine.
    Ever since, Skype starts but isn't functional (while trying to connect to the test service I can't hear anything, not even the dialing), and, after a few minutes, starts with a constant loud noise (which stops, once I quit Skype).
    Interesting, since the problem  has begun, once I do either of the following, Skype returns, and remains, to be fully functional without any noise:
    1. Quit the auto-started Skype, and immediately relaunch it.
    2. Cancel to Skype auto start, and manually start Skype after XFCE becomes visible.
    Looking at log files (below), I've seen some pulse audio related errors which I couldn't solve and may be related.
    I do a full system update (almost) daily.
    I'd be happy to return to the former state (functional auto-started Skype). Please advise
    Thanks
    ----------partial end of  journal------------------
    Jun 08 08:51:08 Ira-Lenovo lightdm[246]: ** (process:272): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
    Jun 08 08:51:08 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting user-620.slice.
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Created slice user-620.slice.
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting User Manager for UID 620...
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting Session c1 of user lightdm.
    Jun 08 08:51:08 Ira-Lenovo systemd-logind[234]: New session c1 of user lightdm.
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started Session c1 of user lightdm.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Paths.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Paths.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Timers.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Timers.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Sockets.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Sockets.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Basic System.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Basic System.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Default.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Default.
    Jun 08 08:51:08 Ira-Lenovo systemd[275]: Startup finished in 78ms.
    Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started User Manager for UID 620.
    Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Activating service name='org.a11y.atspi.Registry'
    Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Successfully activated service 'org.a11y.atspi.Registry'
    Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
    Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
    Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Unable to register client with session manager
    Jun 08 08:51:15 Ira-Lenovo lightdm[246]: ** (process:297): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
    Jun 08 08:51:15 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session closed for user lightdm
    Jun 08 08:51:15 Ira-Lenovo lightdm[297]: pam_unix(lightdm:session): session opened for user ira by (uid=0)
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting user-1000.slice.
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Created slice user-1000.slice.
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting User Manager for UID 1000...
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: pam_unix(systemd-user:session): session opened for user ira by (uid=0)
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting Session c2 of user ira.
    Jun 08 08:51:15 Ira-Lenovo systemd-logind[234]: New session c2 of user ira.
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started Session c2 of user ira.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Paths.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Paths.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Timers.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Timers.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Sockets.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Sockets.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Basic System.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Basic System.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Default.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Default.
    Jun 08 08:51:15 Ira-Lenovo systemd[302]: Startup finished in 36ms.
    Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started User Manager for UID 1000.
    Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
    Jun 08 08:51:18 Ira-Lenovo systemd[1]: Starting RealtimeKit Scheduling Policy Service...
    Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
    Jun 08 08:51:18 Ira-Lenovo systemd[1]: Started RealtimeKit Scheduling Policy Service.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully called chroot.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully dropped privileges.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully limited resources.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Running.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Watchdog thread running.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Canary thread running.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 328 of process 328 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 332 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 333 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 3 threads of 1 processes of 1 users.
    Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
    Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
    Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] main.c: Module load failed.
    Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
    Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory
    Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory
    Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
    Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
    Jun 08 08:51:22 Ira-Lenovo kernel: fuse init (API version 7.22)
    Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounting FUSE Control File System...
    Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounted FUSE Control File System.
    Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 392 of process 392 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Supervising 4 threads of 2 processes of 1 users.
    Jun 08 08:51:22 Ira-Lenovo pulseaudio[392]: Daemon already running.
    Jun 08 08:51:23 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
    Jun 08 08:51:23 Ira-Lenovo systemd[1]: Starting Disk Manager...
    Jun 08 08:51:24 Ira-Lenovo udisksd[401]: udisks daemon version 2.1.3 starting
    Jun 08 08:51:24 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UDisks2'
    Jun 08 08:51:24 Ira-Lenovo systemd[1]: Started Disk Manager.
    Jun 08 08:51:24 Ira-Lenovo udisksd[401]: Acquired the name org.freedesktop.UDisks2 on the system message bus
    Jun 08 08:51:25 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Jun 08 08:51:25 Ira-Lenovo systemd[1]: Starting Daemon for power management...
    Jun 08 08:51:26 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jun 08 08:51:26 Ira-Lenovo systemd[1]: Started Daemon for power management.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): carrier now ON (device state 20)
    Jun 08 08:51:26 Ira-Lenovo kernel: r8169 0000:06:00.0 enp6s0: link up
    Jun 08 08:51:26 Ira-Lenovo kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Auto-activating connection 'Wired connection 1'.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) starting connection 'Wired connection 1'
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTING
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) scheduled...
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) started...
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) scheduled...
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) complete.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) starting...
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) successful.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) complete.
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) started...
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
    Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
    Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> dhcpcd started with pid 440
    Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning IP6 addrconf.
    Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) complete.
    Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: version 6.3.2 starting
    Jun 08 08:51:28 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed nbi -> preinit
    Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: DUID 00:01:00:01:1a:27:1d:43:1c:75:08:53:82:9a
    Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: IAID 08:53:82:9a
    Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: soliciting an IPv6 router
    Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: rebinding lease of 192.168.1.13
    Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: leased 192.168.1.13 for 3600 seconds
    Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: adding route to 192.168.1.0/24
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed preinit -> bound
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> address 192.168.1.13
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> prefix 24 (255.255.255.0)
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> gateway 192.168.1.1
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '192.117.235.235'
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '62.219.186.7'
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) started...
    Jun 08 08:51:35 Ira-Lenovo dhcpcd[440]: enp6s0: removing route to 192.168.1.0/24
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) complete.
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Policy set 'Wired connection 1' (enp6s0) as default for IPv4 routing and DNS.
    Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Writing DNS information to /usr/bin/resolvconf
    Jun 08 08:51:36 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) successful, device activated.
    Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
    Jun 08 08:51:36 Ira-Lenovo systemd[1]: Starting Network Manager Script Dispatcher Service...
    Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Jun 08 08:51:36 Ira-Lenovo systemd[1]: Started Network Manager Script Dispatcher Service.
    Jun 08 08:51:41 Ira-Lenovo dhcpcd[440]: enp6s0: no IPv6 Routers available
    Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): IP6 addrconf timed out or failed.
    Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Jun 08 08:51:59 Ira-Lenovo su[587]: (to root) ira on pts/0
    Jun 08 08:51:59 Ira-Lenovo su[587]: pam_unix(su:session): session opened for user root by ira(uid=1000)

    See https://bbs.archlinux.org/viewtopic.php?id=182030
    Here's the change you recently applied: https://projects.archlinux.org/svntogit … 882c43178c.

  • Lightdm hangs with wrong password

    Hi,
    I use lightdm with lightdm-gtk3-greeter and whenever I enter a wrong password to login, it just hangs. How can I solve this problem?

    The problem solved itself after updating the system.
    Thank you for your help.

  • LightDM-devel does not allow to change desktop environment

    Hi,
    I'm new to Arch and I'm trying LightDM under systemd as my display manager. I don't know if this is the right place to ask about it, since it involves a package from AUR but if anyone can help me, I'll appreciate it.
    I am currently using XFCE4 as my desktop environment. Since I need to switch user and language quite often, the current LightDM version available in pacman does not work for me since it has a bug that prevents it from reading the language selection correctly (https://bugs.launchpad.net/lightdm/+bug/1019314). Therefore, I'm trying the development version available in AUR which corrects the language problem but introduces a new one.
    Because I am new to systemd and LightDM, I'm afraid I have ask the following newbie question. On the first time that I log in, I am able to select language and desktop environment but if I log out and try to log in again, I notice a few strange things. First of all I see that the user name is in bold letters, as if the user would be still logged in. I also notice that I am not longer able to change my desktop session or language, but if I select another user I am able to do it (unless of course, I have already logged in witht this second user, in which case the problem is the same). If I reboot or restart lightdm, I am able once again to select session and language but just like before, only once until next restart. Is this the normal behaviour of lightdm or should i report this as a bug?
    Please, let me know if I'm omitting any important information regarding my system or configuration that may be responsible for this behaviour.
    Last edited by pedroobv (2013-08-02 22:46:20)

    Hello Liza,
    Did you try my solution?
    [Re: Change source system name in variant in BWQ]
    There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
    It's best to go for that solution I already provided to you...
    Diogo.

  • LXDM/LightDM in container: 'Seat has no VTs but VT number not 0' error

    I'm trying to run an x11 server in a container, using x11vnc to access it. OS container has obviously no GPU (the goal is NOT to passthrough any hardware).
    I manage to launch the Display Manager (I tried with both LXDM and LightDM) and then login successfully to a lxde session.
    However each time I get the following message in journalctl "pam_systemd(...): Failed to create session: Seat has no VTs but VT number not 0".
    Then loginctl list-sessions is missing the new session, and also lxpolkit complains with a "No session for pid ***" error window.
    My feeling is that this is related to container having no gpu hence no "real" seat but I was unable to find a solution despite multiple attempts...
    I tried both LXDM and LightDM and got same problem.
    LXDM conf is the standard one except the following line :
    [server]
    arg=/usr/bin/Xorg -noreset +extension GLX +extension RANDR +extension RENDER -config /etc/lxdm/xdummy.conf
    and then LXDM LoginReady script has
    /usr/bin/x11vnc -xkb -auth /var/run/lxdm/lxdm-\:0.auth -noxrecord -noxfixes -noxdamage -forever -bg -rfbport 5900 -o /var/log/x11vnc.log -display :0
    My xorg conf is attached below.
    Can someone point me in the right direction ?
    Thanks !
    xdummy.conf
    Section "ServerFlags"
      Option "DontVTSwitch" "true"
      Option "AllowMouseOpenFail" "true"
      Option "PciForceNone" "true"
      Option "AutoEnableDevices" "false"
      Option "AutoAddDevices" "false"
    EndSection
    Section "InputDevice"
      Identifier "dummy_mouse"
      Option "CorePointer" "true"
      Driver "void"
    EndSection
    Section "InputDevice"
      Identifier "dummy_keyboard"
      Option "CoreKeyboard" "true"
      Driver "void"
    EndSection
    Section "Device"
      Identifier "dummy_videocard"
      Driver "dummy"
      Option "ConstantDPI" "true"
      VideoRam 192000
    EndSection
    Section "Monitor"
      Identifier "dummy_monitor"
      HorizSync   5.0 - 1000.0
      VertRefresh 5.0 - 200.0
    EndSection
    Section "Screen"
      Identifier "dummy_screen"
      Device "dummy_videocard"
      Monitor "dummy_monitor"
      DefaultDepth 24
      SubSection "Display"
        Viewport 0 0
        Depth 24
        Modes "1024x768" "1024x600" "800x600" "320x200"
      EndSubSection
    EndSection
    Section "ServerLayout"
      Identifier   "dummy_server"
      Screen       "dummy_screen"
      InputDevice  "dummy_mouse"
      InputDevice  "dummy_keyboard"
    EndSection

    Norman-
    All outawater suggested is that you lop out the code that you are using
    for playing sounds and make sure that works, since that seems to be
    where your problem is. The rest of your (copious amounts of) applet-
    based code is just a distraction at this point.
    No, I have no clues as to your possible error. Though the first step that I would take, if this were my code, would be to isolate the part
    that's giving me troubles and get it as simple as possible - i.e. make
    sure I can write a console app that plays the midi file I want. Then I
    would build up from there - i.e. dump that into an applet with one
    button that does that.
    Good luck to you
    Lee

  • Lightdm with unity-greeter won't load

    I've been attempting to install lightdm and the unity greeter, and I'm a bit stuck here.
    I've installed the lightdm-ubuntu and lightdm-unity-greeter packages from the AUR.  It starts up normally, but there is no gear available to choose session type, and logging in causes the DM to just restart and go back to the logon page.
    I was able to use lightdm and lightdm-gtk-greeter successfully.  Also, running startx from another tty successfully starts my session (in my case, xmonad).  I've attached my configuration files and log files, in case anyone can make heads or tails of them.
    File dump follows!
    Here's my etc/lightdm/lightdm.conf:
    # General configuration
    # start-default-seat = True to always start one seat if none are defined in the configuration
    # greeter-user = User to run greeter as
    # minimum-display-number = Minimum display number to use for X servers
    # minimum-vt = First VT to run displays on
    # lock-memory = True to prevent memory from being paged to disk
    # user-authority-in-system-dir = True if session authority should be in the system location
    # guest-account-script = Script to be run to setup guest account
    # log-directory = Directory to log information to
    # run-directory = Directory to put running state in
    # cache-directory = Directory to cache to
    # xsessions-directory = Directory to find X sessions
    # remote-sessions-directory = Directory to find remote sessions
    # xgreeters-directory = Directory to find X greeters
    [LightDM]
    #start-default-seat=true
    #greeter-user=lightdm
    #minimum-display-number=0
    #minimum-vt=7
    #lock-memory=true
    #user-authority-in-system-dir=false
    #guest-account-script=guest-account
    #log-directory=/var/log/lightdm
    #run-directory=/var/run/lightdm
    #cache-directory=/var/cache/lightdm
    xsessions-directory=/usr/share/xsessions
    #remote-sessions-directory=/usr/share/lightdm/remote-sessions
    #xgreeters-directory=/usr/share/xgreeters
    # Seat defaults
    # type = Seat type (xlocal, xremote)
    # xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
    # xserver-layout = Layout to pass to X server
    # xserver-config = Config file to pass to X server
    # xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
    # xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
    # xdmcp-port = XDMCP UDP/IP port to communicate on
    # xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
    # greeter-session = Session to load for greeter
    # greeter-hide-users = True to hide the user list
    # greeter-allow-guest = True if the greeter should show a guest login option
    # greeter-show-manual-login = True if the greeter should offer a manual login option
    # greeter-show-remote-login = True if the greeter should offer a remote login option
    # user-session = Session to load for users
    # allow-guest = True if guest login is allowed
    # guest-session = Session to load for guests (overrides user-session)
    # session-wrapper = Wrapper script to run session with
    # display-setup-script = Script to run when starting a greeter session (runs as root)
    # greeter-setup-script = Script to run when starting a greeter (runs as root)
    # session-setup-script = Script to run when starting a user session (runs as root)
    # session-cleanup-script = Script to run when quitting a user session (runs as root)
    # autologin-guest = True to log in as guest by default
    # autologin-user = User to log in with by default (overrides autologin-guest)
    # autologin-user-timeout = Number of seconds to wait before loading default user
    # autologin-session = Session to load for automatic login (overrides user-session)
    # exit-on-failure = True if the daemon should exit if this seat fails
    [SeatDefaults]
    type=xlocal
    xserver-command=X
    #xserver-layout=
    #xserver-config=
    #xserver-allow-tcp=false
    #xdmcp-manager=
    #xdmcp-port=177
    #xdmcp-key=
    #greeter-session=lightdm-unity-greeter
    #greeter-hide-users=false
    #greeter-allow-guest=true
    #greeter-show-manual-login=false
    #greeter-show-remote-login=true
    user-session=XMonad
    #allow-guest=true
    #guest-session=UNIMPLEMENTED
    #session-wrapper=lightdm-session
    #display-setup-script=
    #greeter-setup-script=
    #session-setup-script=
    #session-cleanup-script=
    #autologin-guest=false
    #autologin-user=
    #autologin-user-timeout=0
    #autologin-session=UNIMPLEMENTED
    #exit-on-failure=false
    # Seat configuration
    # Each seat must start with "Seat:".
    # Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.
    #[Seat:0]
    # XDMCP Server configuration
    # enabled = True if XDMCP connections should be allowed
    # port = UDP/IP port to listen for connections on
    # key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
    # The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
    # it can be a word and the first 7 characters are used as the key.
    greeter-session=unity-greeter
    [XDMCPServer]
    #enabled=false
    #port=177
    #key=
    # VNC Server configuration
    # enabled = True if VNC connections should be allowed
    # port = TCP/IP port to listen for connections on
    [VNCServer]
    #enabled=false
    #port=5900
    #width=1024
    #height=768
    #depth=8
    My contents of /usr/share/xsessions:
    $ ls /usr/share/xsessions
    xmonad.desktop
    /usr/share/xsessions/xmonad.desktop
    [Desktop Entry]
    Encoding=UTF-8
    Name=XMonad
    Comment=Lightweight tiling window manager
    Exec=xmonad
    Icon=xmonad.png
    Type=XSession
    And the log files, after boot and one log on attempt:
    /var/log/lightdm/lightdm.log
    [+0.03s] DEBUG: Logging to /var/log/lightdm/lightdm.log
    [+0.03s] DEBUG: Starting Light Display Manager 1.4.0, UID=0 PID=355
    [+0.03s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
    [+0.03s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
    [+0.27s] DEBUG: Registered seat module xlocal
    [+0.27s] DEBUG: Registered seat module xremote
    [+0.27s] DEBUG: Adding default seat
    [+0.27s] DEBUG: Starting seat
    [+0.27s] DEBUG: Starting new display for greeter
    [+0.27s] DEBUG: Starting local X display
    [+0.31s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
    [+0.31s] DEBUG: Using VT 7
    [+0.31s] DEBUG: Activating VT 7
    [+0.36s] DEBUG: Logging to /var/log/lightdm/x-0.log
    [+0.43s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
    [+0.43s] DEBUG: Launching X Server
    [+0.43s] DEBUG: Launching process 368: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
    [+0.44s] DEBUG: Waiting for ready signal from X server :0
    [+0.44s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
    [+0.44s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
    [+2.46s] DEBUG: Got signal 10 from process 368
    [+2.46s] DEBUG: Got signal from X server :0
    [+2.46s] DEBUG: Connecting to XServer :0
    [+2.51s] DEBUG: Starting greeter
    [+2.51s] DEBUG: Started session 387 with service 'lightdm-greeter', username 'lightdm'
    [+3.33s] DEBUG: Session 387 authentication complete with return value 0: Success
    [+3.33s] DEBUG: Greeter authorized
    [+3.33s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
    [+3.38s] DEBUG: Session 387 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter
    [+4.53s] DEBUG: Greeter connected version=1.4.0
    [+4.53s] DEBUG: Greeter connected, display is ready
    [+4.53s] DEBUG: New display ready, switching to it
    [+4.53s] DEBUG: Activating VT 7
    [+5.34s] DEBUG: Greeter start authentication for jabenze
    [+5.34s] DEBUG: Started session 424 with service 'lightdm', username 'jabenze'
    [+5.36s] DEBUG: Greeter start authentication for jabenze
    [+5.36s] DEBUG: Session 424: Sending SIGTERM
    [+5.36s] DEBUG: Started session 426 with service 'lightdm', username 'jabenze'
    [+5.36s] DEBUG: Session 424 terminated with signal 15
    [+5.36s] DEBUG: Session 424 failed during authentication
    [+5.39s] DEBUG: Session 426 got 1 message(s) from PAM
    [+5.39s] DEBUG: Prompt greeter with 1 message(s)
    [+13.53s] DEBUG: Continue authentication
    [+13.55s] DEBUG: Session 426 authentication complete with return value 0: Success
    [+13.55s] DEBUG: Authenticate result for user jabenze: Success
    [+13.56s] DEBUG: User jabenze authorized
    [+13.56s] DEBUG: Greeter requests session ubuntu
    [+13.56s] DEBUG: Using session ubuntu
    [+13.56s] DEBUG: Stopping greeter
    [+13.56s] DEBUG: Session 387: Sending SIGTERM
    [+13.59s] DEBUG: Greeter closed communication channel
    [+13.59s] DEBUG: Session 387 exited with return value 0
    [+13.59s] DEBUG: Greeter quit
    [+13.60s] DEBUG: Dropping privileges to uid 1000
    [+13.60s] DEBUG: Calling setresgid
    [+13.60s] DEBUG: Calling setresuid
    [+13.62s] DEBUG: Restoring privileges
    [+13.62s] DEBUG: Calling setresuid
    [+13.62s] DEBUG: Calling setresgid
    [+13.63s] DEBUG: Dropping privileges to uid 1000
    [+13.63s] DEBUG: Calling setresgid
    [+13.63s] DEBUG: Calling setresuid
    [+13.63s] DEBUG: Writing /home/jabenze/.dmrc
    [+13.70s] DEBUG: Restoring privileges
    [+13.70s] DEBUG: Calling setresuid
    [+13.70s] DEBUG: Calling setresgid
    [+13.73s] DEBUG: Failed to load session file /usr/share/xsessions/ubuntu.desktop: No such file or directory
    [+13.73s] DEBUG: Failed to start greeter
    [+13.73s] DEBUG: Stopping display
    [+13.73s] DEBUG: Session 426: Sending SIGTERM
    [+13.73s] DEBUG: Session 426 terminated with signal 15
    [+13.73s] DEBUG: User session quit
    [+13.73s] DEBUG: Sending signal 15 to process 368
    [+14.28s] DEBUG: Process 368 exited with return value 0
    [+14.28s] DEBUG: X server stopped
    [+14.28s] DEBUG: Removing X server authority /var/run/lightdm/root/:0
    [+14.28s] DEBUG: Releasing VT 7
    [+14.28s] DEBUG: Display server stopped
    [+14.28s] DEBUG: Display stopped
    [+14.28s] DEBUG: Active display stopped, switching to greeter
    [+14.28s] DEBUG: Switching to greeter
    [+14.28s] DEBUG: Starting new display for greeter
    [+14.28s] DEBUG: Starting local X display
    [+14.28s] DEBUG: Using VT 7
    [+14.28s] DEBUG: Logging to /var/log/lightdm/x-0.log
    [+14.28s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
    [+14.28s] DEBUG: Launching X Server
    [+14.28s] DEBUG: Launching process 463: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
    [+14.28s] DEBUG: Waiting for ready signal from X server :0
    [+14.88s] DEBUG: Got signal 10 from process 463
    [+14.88s] DEBUG: Got signal from X server :0
    [+14.88s] DEBUG: Connecting to XServer :0
    [+14.88s] DEBUG: Starting greeter
    [+14.88s] DEBUG: Started session 468 with service 'lightdm-greeter', username 'lightdm'
    [+14.90s] DEBUG: Session 468 authentication complete with return value 0: Success
    [+14.90s] DEBUG: Greeter authorized
    [+14.90s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
    [+14.90s] DEBUG: Session 468 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter
    [+15.01s] DEBUG: Greeter connected version=1.4.0
    [+15.01s] DEBUG: Greeter connected, display is ready
    [+15.01s] DEBUG: New display ready, switching to it
    [+15.01s] DEBUG: Activating VT 7
    [+15.01s] DEBUG: Stopping greeter display being switched from
    [+15.10s] DEBUG: Greeter start authentication for jabenze
    [+15.10s] DEBUG: Started session 500 with service 'lightdm', username 'jabenze'
    [+15.11s] DEBUG: Session 500 got 1 message(s) from PAM
    [+15.11s] DEBUG: Prompt greeter with 1 message(s)
    [+15.15s] DEBUG: Greeter start authentication for jabenze
    [+15.15s] DEBUG: Session 500: Sending SIGTERM
    [+15.15s] DEBUG: Started session 502 with service 'lightdm', username 'jabenze'
    [+15.15s] DEBUG: Session 500 terminated with signal 15
    [+15.15s] DEBUG: Session 500 failed during authentication
    [+15.15s] DEBUG: Session 502 got 1 message(s) from PAM
    [+15.15s] DEBUG: Prompt greeter with 1 message(s)
    /var/log/lightdm/x-0-greeter.log:
    ** (process:468): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
    Activating service name='org.a11y.atspi.Registry'
    [+0.00s] DEBUG: unity-greeter.vala:438: Starting unity-greeter 12.10.4 UID=999 LANG=(null)
    [+0.00s] DEBUG: unity-greeter.vala:441: Setting cursor
    Successfully activated service 'org.a11y.atspi.Registry'
    [+0.00s] DEBUG: unity-greeter.vala:455: Loading command line options
    [+0.00s] DEBUG: unity-greeter.vala:483: Setting GTK+ settings
    ** (at-spi2-registryd:490): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
    ** (at-spi2-registryd:490): WARNING **: Unable to register client with session manager
    [+0.04s] DEBUG: unity-greeter.vala:506: Creating Unity Greeter
    [+0.04s] DEBUG: unity-greeter.vala:55: Creating background surface
    [+0.04s] DEBUG: Connecting to display manager...
    [+0.04s] DEBUG: Wrote 17 bytes to daemon
    [+0.04s] DEBUG: Read 8 bytes from daemon
    [+0.04s] DEBUG: Read 149 bytes from daemon
    [+0.04s] DEBUG: Connected version=1.4.0 default-session=XMonad show-manual-login=false hide-users=false has-guest-account=true show-remote-login=true
    [+0.06s] DEBUG: menubar.vala:342: LANG=(null) LANGUAGE=(null)
    [+0.06s] WARNING: File '/usr/lib/indicators3/7/libsession.so' does not exist.
    [+0.06s] WARNING: File '/usr/lib/indicators3/7/libdatetime.so' does not exist.
    [+0.06s] WARNING: File '/usr/lib/indicators3/7/libpower.so' does not exist.
    [+0.06s] WARNING: File '/usr/lib/indicators3/7/libsoundmenu.so' does not exist.
    [+0.06s] WARNING: File '/usr/lib/indicators3/7/libapplication.so' does not exist.
    [+0.06s] DEBUG: menubar.vala:360: LANG=(null) LANGUAGE=(null)
    [+0.07s] DEBUG: Loading users from org.freedesktop.Accounts
    [+0.07s] DEBUG: Loading user /org/freedesktop/Accounts/User1000
    [+0.08s] DEBUG: Loading sessions from org.freedesktop.DisplayManager
    [+0.08s] DEBUG: user-list.vala:950: Adding/updating user jabenze ()
    [+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
    [+0.08s] WARNING: Could not get accounts property XHasMessages
    [+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
    [+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
    [+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
    [+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
    [+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
    [+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
    [+0.08s] WARNING: Could not get accounts property XHasMessages
    [+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
    [+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
    [+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
    [+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
    [+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
    [+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
    [+0.08s] WARNING: Could not get accounts property XHasMessages
    [+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
    [+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
    [+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
    [+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
    [+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
    [+0.08s] DEBUG: user-list.vala:932: Adding guest account entry
    [+0.13s] DEBUG: Loaded session /usr/share/xsessions/xmonad.desktop (XMonad, Lightweight tiling window manager)
    [+0.13s] WARNING: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
    [+0.13s] DEBUG: Starting authentication for user jabenze...
    [+0.13s] DEBUG: Wrote 23 bytes to daemon
    [+0.18s] DEBUG: Starting authentication for user jabenze...
    [+0.18s] DEBUG: Wrote 23 bytes to daemon
    [+0.18s] DEBUG: main-window.vala:176: Screen is 3840x1080 pixels
    [+0.18s] DEBUG: main-window.vala:182: Monitor 0 is 1920x1080 pixels at 0,0
    [+0.18s] DEBUG: main-window.vala:182: Monitor 1 is 1920x1080 pixels at 1920,0
    [+0.18s] DEBUG: unity-greeter.vala:509: Showing greeter
    [+0.18s] DEBUG: unity-greeter.vala:198: Showing main window
    [+0.21s] DEBUG: background.vala:470: Regenerating backgrounds
    [+0.21s] DEBUG: background.vala:68: Making background /usr/share/backgrounds/warty-final-ubuntu.png at 1920x1080
    [+0.21s] WARNING: unity-greeter.vala:523: Error starting nm-applet: Failed to execute child process "nm-applet" (No such file or directory)
    [+0.21s] DEBUG: unity-greeter.vala:527: Starting main loop
    [+0.21s] DEBUG: Read 8 bytes from daemon
    [+0.21s] DEBUG: Read 37 bytes from daemon
    [+0.21s] DEBUG: Ignoring prompt authentication with invalid sequence number 1
    [+0.21s] DEBUG: settings-daemon.vala:97: Could not start gnome-settings-daemon over DBus: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon was not provided by any .service files
    [+0.27s] DEBUG: Setting keyboard layout to 'us'
    [+0.29s] DEBUG: Read 8 bytes from daemon
    [+0.29s] DEBUG: Read 37 bytes from daemon
    [+0.29s] DEBUG: Prompt user with 1 message(s)
    [+0.32s] DEBUG: unity-greeter.vala:181: starting system-ready sound
    [+0.38s] DEBUG: background.vala:117: Render of background /usr/share/backgrounds/warty-final-ubuntu.png complete
    /var/log/lightdm/x-0.log
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.7.0-1-ARCH x86_64
    Current Operating System: Linux frankie 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=51606072-17ca-431e-a2bf-ba739d1cfeb1 ro quiet
    Build Date: 16 December 2012 04:45:14PM
    Current version of pixman: 0.28.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 26 13:36:33 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Loading extension NV-GLX
    Loading extension NV-CONTROL
    Loading extension XINERAMA

    I am also stuck on this. I get pretty much the exact same result. Until I figure it out I'll be doing the quick startx.

  • Is lightdm recommended over gdm now (used with GNOME3)

    I am a Ubuntu user intending to switch over to ArchLinux. In Ubuntu, lightdm is used over gdm. But in the Arch docs for GNOME, https://wiki.archlinux.org/index.php/GN … ning_GNOME, it says
    For the best desktop integration, login manager GDM is recommended. Other login managers (a.k.a. display managers) such as SLiM can be used in place of GDM. Check out the wiki article on display managers to learn how desktop environments are started.
    Is that still the case? Or should I use lightdm which is newer already. Is there a problem with "desktop integration" if I use LightDM?

    hadrons123 wrote:
    jiewmeng wrote:
    I am a Ubuntu user intending to switch over to ArchLinux. In Ubuntu, lightdm is used over gdm. But in the Arch docs for GNOME, https://wiki.archlinux.org/index.php/GN … ning_GNOME, it says
    For the best desktop integration, login manager GDM is recommended. Other login managers (a.k.a. display managers) such as SLiM can be used in place of GDM. Check out the wiki article on display managers to learn how desktop environments are started.
    Is that still the case? Or should I use lightdm which is newer already. Is there a problem with "desktop integration" if I use LightDM?
    Stock packages are generally considered better than AUR packages.But you are free to use whatever you want when you know what you are doing.
    I have had issues with lightDM in the past and quit on it. I don't understand what lightDM brings that GDM doesn't?
    I use LXDM and it has been pretty good all this time.
    I think what lightdm brings to the table is the easier way to create frontends so it can adapt better to different environments.
    GDM is gtk only and has some hard depencies because of that but with lightdm you should be able to have a simpler core and a frontend with the technology you want, for example QT, QML, GTK, HTML, etc.

Maybe you are looking for