Limit execeed for Recovery files.
After starting my DB ,Getting this Erro........
Database mounted.
ORA-16038: log 1 sequence# 227 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 1 thread 1:
'D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\REDO01.LOG'
How can Resolve this problem.
16038, 00000, "log %s sequence# %s cannot be archived"
// *Cause: An attempt was made to archive the named file, but the
// file could not be archived. Examine the secondary error
// messages to determine the cause of the error.
// *Action: No action is required.
bcm@bcm-laptop:~$ oerr ora 19809
19809, 00000, "limit exceeded for recovery files"
//*Cause: The limit for recovery files specified by the
// DB_RECOVERY_FILE_DEST_SIZE was exceeded.
// *Action: There are five possible solutions:
// 1) Take frequent backup of recovery area using RMAN.
// 2) Consider changing RMAN retention policy.
// 3) Consider changing RMAN archived log deletion policy.
// 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE.
// 5) Delete files from recovery area using RMAN.
Similar Messages
-
Please HELP with ORA-19809: limit exceeded for recovery files
Hi Gurus,
I am not a DBA but a developer. Today my Oracle database 11g on my PC will not open and I am getting the errors,
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
I checked my alert logs and found these errors,
Errors in file c:\oracle\diag\rdbms\orcl\orcl\trace\orcl_ora_2144.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 41072128 bytes disk space from 4039114752 limit
ARCH: Error 19809 Creating archive log file to 'C:\ORACLE\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_04_08\O1_MF_1_120_%U_.ARC'
Errors in file c:\oracle\diag\rdbms\orcl\orcl\trace\orcl_ora_2144.trc:
ORA-16038: log 3 sequence# 120 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\ORCL\REDO03.LOG'
USER (ospid: 2144): terminating the instance due to error 16038
Instance terminated by USER, pid = 2144
So I started searching for answers on this forum and found a suggestion using RMAN to delete all the archive logs,
RMAN> connect target sys/*******
RMAN> delete archivelog all;
RMAN>crosscheck archivelog all;
But I get these errors in RMAN,
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 04/08/2011 11:20:58
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
So, please help me: How do I fix this problem since I can't start the instance?
Thank you.
BenYou need to increase the FRA by changing the parameter DB_RECOVERY_FILE_DEST_SIZE. Create a parameter file while being connected as Sys user and issue,
sql>create pfile from spfile;It would create the pfile in the Oracle_Home/database folder. Edit that file and increase the parameter to a larger size-like double of it's current value. Save the file and issue,
sql>startup pfile=<your location of the file>HTH
Aman.... -
ORA-19809: limit exceeded for recovery files and flash_recovery_area
Hi.
I am getting the below errors (at the end) when trying to backup the database using RMAN.
The directory structure is
E:\oracle\TEST
E:\oracle\TEST\flash_recovery_area
E:\oracle\TEST\flash_recovery_area\arch --> HAS ARCHIVE FILES
E:\oracle\TEST\flash_recovery_area\TEST
E:\oracle\ATEST\flash_recovery_area\TEST\BACKUPSET --> RMAN backup sets
E:\oracle\TEST\flash_recovery_area\TEST\ONLINELOG --> This is empty.
D:\oracle\product\10.2.0\ is oracle home
It has:
D:\oracle\product\10.2.0\admin
D:\oracle\product\10.2.0\db1
D:\oracle\product\10.2.0\oradata
D:\oracle\product\10.2.0\oradata\test has data files.
1) I created this database using OUI and DBCA and I have a feeling that this structure is somewhat convoluted. Could you let me know if this needs to be changed?
2) Secondly, the RMAN error. The entire size of E:\oracle\TEST\flash_recovery_area is now only 1.74 GB yet I am getting this error.
I deleted old archive logs from E:\oracle\TEST\flash_recovery_area\arch . Currently it has only arch logs for seven days. Next I issued delete expired archivelog all command. Right now crosscheck archivelog all finds only 40 archive logs..
and increased db_recovery_file_dest_size to 10GB. alter system set db_recovery_file_dest_size=10000M scope=both;
select name
, floor(space_limit / 1024 / 1024) "Size MB"
, ceil(space_used / 1024 / 1024) "Used MB"
from v$recovery_file_dest
order by name
This query is returning the use space as 6GB. However physically only 1.74 GB is currenly used. Please let me know the way forward. Appreciate in advance.
channel ORA_DISK_1: starting piece 1 at 09-JUN-09
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:56:
15
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 09-JUN-09
channel ORA_DISK_1: finished piece 1 at 09-JUN-09
piece handle=E:\ORACLE\TEST\FLASH_RECOVERY_AREA\TEST\BACKUPSET\2009_06_09\
O1_MF_NCSNF_TAG20090609T175224_52XPN0Y9_.BKP tag=TAG20090609T175224 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:56:
15
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/09/2009 17:54:
19
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 10485760000 limit
RMAN>Hi,
Thanks for looking into my problem... Here are the answers..
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination E:\oracle\TEST\flash_recovery_area\arch
Oldest online log sequence 1011
Next log sequence to archive 1013
Current log sequence 1013
SQL>
select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0.00 0.00 0
ONLINELOG 0.00 0.00 0
ARCHIVELOG 0.00 0.00 0
BACKUPPIECE 66.57 0.20 5
IMAGECOPY 0.00 0.00 0
FLASHBACKLOG 0.00 0.00 0
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string LOCATION=E:\oracle\TEST\flash_recovery_area\arch
log_archive_dest_10 string
log_archive_dest_2 string
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
NAME TYPE VALUE
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string enable
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
SQL> -
Do I need to create a recovery file for my new laptop if there is a HP recovery
I have just bought a HP Pavilion 15 Notebook PC 15 - n219 sa
Serial : [Edited for Personal Information]
Product # : F9U67EA#ABU
There is a recovery partition.
I am a bit confused on the issue of recovery file creation. I have found instructions on youtube on the the creation of an image of the laptop but I wonder why I need to do that given there is a HP recovery manager.
Although I do not really know what the manager does.
Can anyone tell me what the best strategy is regarding recovery files for this laptop taking in to account the partition.
After I have done this I wish to remove macfee and install the Norton I bought. Do I need to disable the macafee? If so how do I do this?
Can I remove the macefee to save space on the hard drive?
If you can help with these questions that would be much appreciate.
I gues I just want to do the right thing with this new laptop and avoid deleting too much whilst savinbg space and having a protected machine I can restore.
Thank you
This question was solved.
View Solution.Hi,
You should definetely create a set of Recovery Media - this is your copy of the operating system. An example of when you may need this would be if you had to replace the Hard Drive - details on creating this can be found on the following HP document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03481733&lc=en&cc=us&dlc=en
Regarding McAfee, you should uninstall this first before trying to install Norton - you can do this in the usual way by opening Windows Control Panel, open Programs and Features, right click the entry for McAfee and select Uninstall. When the process has completed, restart the notebook before installing Norton.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
ORA-27078: unable to determine limit for open files
I installed Oracle XE on my Gengoooraclexe@ghost ~ $ lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2011 16:51:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-JUN-2011 10:03:30
Uptime 0 days 6 hr. 48 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ghost.emacs.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Poraclexe@ghost ~ $ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 25 07:19:58 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> show user
USER is "SYS"
SQL> startup
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -2958340
SQL> startup force
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -3378372
SQL> startup
ORA-03113: end-of-file on communication channel
SQL> exit
Disconnectedunable to determine limit for open filessee http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJFAIA
Is that a debian flavored distro? -
Is there a storage limit for the files sent?
Is there a storage limit for the files sent? Do I have to delete the files or I can keep them indefinitely? Also, do link to the documents expire for the recipients so they can go back to the email if they forget to download?
4kByte file size, 1000 notes max.
-
Is there a size limit for uploading files?
is there a size limit for uploading files?
You have max 20GB storage.
Upload anything you want up to that limit - be it one file or many.
The only limit after that is the speed of your internet connection since extremely large files can take hours to upload. -
Where are the auto recovery files stored for Visio 2010?
I have auto recovery set for every 5 minutes. I have been working on a file that has been saved several times a day. Today when just moving a shape Viso 2010 crashed after I had been working on the file for over 2 hours. Auto recovery popped
up every 5 minutes indicating it was saving the file. After the crash the ony file I could find was the file as it was when I first opened it this AM. None of the work done today was saved.
Did auto recovery completely fail? Where can I look for the auto recovery file?
I have not done a reboot because I am afraid that if the file exits it will be gone for sure if I reboot. Any suggestions are welcome.
There must be a temp file or something that I can look for but not sure what the extension would be or the location.
Hopefully someone here can help.
thanks,
greg
Greg J WilsonHow do I know? You state the the auto-save file extension is .vxd - that's the Visio document XML format.
You can change this in File -> Options -> Save
As for the crashes, are there any messages when a crash occurs?
Check that the video drivers you have are the latest, try a different screen resolution to see if that changes anything and turn off or change any screen accelerators.
-- Paul Herber, Sandrila Ltd. http://www.sandrila.co.uk/ Engineering and software shapes for Visio.
My mistake - the file format is .vsd - standard visio format
Here is the info from the event viewer for the specific crash that caused me temporary pain.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2011-07-25T17:15:25.000000000Z" />
<EventRecordID>83552</EventRecordID>
<Channel>Application</Channel>
<Computer>gw-Tosh_laptop</Computer>
<Security
/>
</System>
<EventData>
<Data>VISIO.EXE</Data>
<Data>14.0.6022.1000</Data>
<Data>4d6eacd6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>8469f91f</Data>
<Data>1668</Data>
<Data>01cc4ae02611b81c</Data>
<Data>C:\Program
Files\Microsoft Office\Office14\VISIO.EXE</Data>
<Data>unknown</Data>
<Data>af70a4ff-b6e1-11e0-82fc-001e33913568</Data>
</EventData>
</Event>
Greg J Wilson -
T500 - HDD for Ultrabay - can it be used for Recovery Media & Backups & Page File & data?
I'm learning to check first before buying things.
I am considering getting a generic ultrabay SATA adapter
http://cgi.ebay.com/SATA-adapter-IBM-THINKPAD-43N3412-R400-W500-X200S-R500-/130441260492
and a WD 7,200 HDD
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136278
Can the ultrabay HDD be used for Recovery Media, and also Backups, page file, and other data?
And can the Backups on this HDD be deleted, so only the last backup is present?
Also, is it possible to use a HDD in the ultrabay slot, without an adpater? My T500 is a desktop replacement currently, so the HDD wouldn't need to be protected from movement or bumps.
Thanks for any ideasFor all of you who know less than I do, a HDD in the ultrabay slot can be used as a Recovery boot, and for the R&R backups.
These must both be put on the primary partition of the HDD.
I believe, but can't test or confirm, that another partition (logical partition) could be added to the drive and used for page filing and data. -
What is limit to load csv file for Apex Utility?
What is limit to load csv file for Apex Utility?
How many records can I load through apex load utility?
I am loading csv files.
Thank you.Hi,
You download the report that is displayed in APEX which is limited to 65k. There may be some way of creating a custom file based off the table rather than using APEX's built in export to csv option but I don't know of any being released. Denes produced an export to .xls option but I don't know how many rows that caters too: http://htmldb.oracle.com/pls/otn/f?p=31517:108:1512181285516724::NO:: -- I assume 65k too though.
Mike -
Recovery File For Mountain Lion
Is there such a thing as a Mountain Lion Recovery File that needs to be made by the user? If so how is it made?
AndyApple started that with Lion, recovery is via the hard drive instead of an install disk...only catch is that you must have an internet connection because the recovery HD is a bare-bones startup that then goes to the Apple servers to reinstall Mac OS X if that is what you want to do. Other utilities, however, are resident in the recovery HD so thngs like disk repair that you used to have to rely on the install disk to use on the startup volume, you can now use from the Recovery HD.
All that you do is restart your Mac and hold the Command and R keys to boot to the recovery HD, then choose what you want to do from the options window that appears. Disk Utiility is there so you can repair permissions, repair hard drive, and so on. -
Channel count limit for tdm files
Hello,
I have not been able to find any documentation listing the maximum number of groups, channels/group for tdm files. Does anyone know these values, or a document that lists them??Hello CAN_man,
There is a DevZone document on the topic of TDMS files that can be found at the following link: TDMS File Format Internal Structure
The document contains the answer to your question, and states that:
"Each file can contain an unlimited number of groups, and each group can contain an unlimited number of channels."
Please let me know whether you have more questions!
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/ -
I have a HP Pavillion P6540F desktop running Windows 7 Home Premium. A few days ago a problem occured with windows which basically wiped out my OS and I had to restore my computer to factory settings. Before restoring my computer I backed up all of my files to a disk. Upon reinstalling windows I placed the disk with all of my recovery files on it into my computer and ran the recovery .exe file which began the download of my files. This all worked perfectly fine but the problem is that these files only saved to a file on my desktop and did not restore to their original locations. Is there any way to get these files to restore to the correct locations on my computer without having to manually drag the folders to their former locations? Honestly I do not know where many of these files were located before the restore, and many items such as preferences for certain programs are impossible for me to relocate. Thanks for the help.
This question was solved.
View Solution.The backup used in Recovery only restores the files to a folder, leaving the owner to move them.I agree, not the most helpful backup app but better than nothing I suppose.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
11.2.0.3 grid installation fails while selecting OCFS2 for ocr files
We are installing 11GR2 (11.2.0.3) cluster on a 64 bit system. we have OCFS2 filesystem for shared devices. version 1.6.3.
While selecting ocr file locations , we get the following error
[INS-41321] Invalid oracle cluster register [OCR] Location
Cause- The installer detects that the storage type of location is not supported for Oracle Cluster registery
Action - Provide a supported storage location for the Oracle Cluster Registry
Additional information
/crp2db01/OCR/ocr_1 is not shared
However , this mountpoint is shared across both the nodes.
Note: 11201 grid installation was successful and it accepted the above locations for OCR. however ,we need 11.2.0.3 cluster for 11.2.0.3 databaseAs for your current problem, just because Oracle "allows" OCFS2 in a GRID environment, I would never suggest nor implement that. It adds a layer of complexity that is totally unnecessary when a GRID/ASM implementation performs circles around OCFS2. ASM is much easier to manage, maintain, expand and shrink than OCFS2. Especially at version 11.2.0.3. When working at a large telco a few years ago, we had a 300TB+ ASM environment. OCFS2 could not even begin to be that big. ASM will provide you a MUCH more stable environment than OCFS2. And with ASM there is a lot of "magic" that happens with OCR/Voting that makes your life MUCH easier. If you "require" shared application files, then use ASM/ACFS. It is a much better "volume manager" than OCFS2.
Since you must present devices to the system for OCFS2, you should not have any problems doing the same for ASM. (and don't use ASMLib as it is going away and is not necessary - just make sure you use a partition that skips the first 1M (usually cylinder 1) and you should be good to go!)
I also would not use a "shared ORACLE_HOME" on either ACFS or OCFS2. The biggest reason is that you lose the ability to do a "rolling" upgrade and when you have a VLC, that becomes much more important that saving a few GB worth of storage.
I would also pay attention to this:
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
3.1.4.2 General Storage Considerations for Oracle RAC
Use the following guidelines when choosing the storage options to use for each file type:
You can choose any combination of the supported storage options for each file type provided that you satisfy all requirements listed for the chosen storage options.
If you plan to install an Oracle RAC home on a shared OCFS2 location, then you must upgrade OCFS2 to at least version 1.4.1, which supports shared writable mmaps.
Oracle recommends that you choose Oracle ASM as the storage option for database and recovery files.
For Standard Edition Oracle RAC installations, Oracle ASM is the only supported storage option for database or recovery files.
Maybe you are looking for
-
I downloaded OS X Yosimite and now I can't update my iPhoto. I keep getting this message "This update is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled". None of this has happene
-
Hello, a webservice consumer-proxy does'nt work fine and I have no idea, what's wrong. In SOAMANAGER I checked the tracefiles and a lot of errors occurs: "CX_ST_GROUP_MISSING_CASE:XSLT Exception bei Offset 409, XPath n0...Element id fehlt (fault loca
-
How to batch rename with index/counter all files in a project?
I have a project with files named with an index (I believe that is the correct term). For example, the files are named XX1, XX2, and so on. However, some files have the same name because I imported from two different memory cards, without thinking
-
Condition Values not being copied when creating sales order with reference
hi experts i am copy a sales order with reference in va01 , when i copy the order it status is shown as incomplete beacue the condition values in some condition type sis zero, whereas if i delete amount for some condition type and re-eneter it the co
-
Runtime error to get the attribute value of an element
mydoc.xml ========= <?xml version = "1.0"?> <persons> <person name="Joe" age="22" /> </persons> In mydox.xml, I want to get the attribute values of element person. Of course, in the actual XML file, it is more complicated. However, I get the fol