Limit to UIU authorization

Hello Experts,
I faced a issue recently where I am not able to include any more UIU_comp authorizations. The error that pop up is "All authorizations beyond the maximum number are ignored" . Is there a way where we can increase the limit of authorization objects in a given PFCG?
Thanks!
Neha

Hi Neha,
This problem usually happens due to bad role design. The error message
description is most likely the following:
Message no. 5@026
Diagnosis
The maximum number of 100 authorizations per object was exceeded.
System Response
All authorizations beyond the maximum number are ignored.
Procedure
Additional authorizations can only be included if you first delete a
corresponding number of existing authorizations. Note that deleting
authorizations with the status "Standard" or "Maintained" can lead to
the inclusion of new default authorizations at the next merging of the
authorization data. Avoid the maintenance associated with this by
removing only changed or manual authorizations.
Probably you have a role that has among other authorization objects,
more than 100 occurrances for authorization object UIU_COMP. This is
more than the recommended, as the system limit of 100. You can confirm
that by selecting the role in question and reviewing this object in
table AGR_1251.
So, in order to overcome the problem, all you have to do is to
approach your Security expert and ask for a redesign on this role. It
will be most likely needed to split your authorization data in more
than one role, to avoid trespassing the expected limit.
==================================================
Hoping that above is helpful.
Best regards - Christophe

Similar Messages

How do i deauthorize one computer in itunes when the limit of 5 authorizations was reached less than one year ago?

How do I deauthorize just one PC in itunes when the limit of 5 authorizations was met less than one year ago?

the authorized 5 are one computer

How delete account or reset the limit of account authorize

after i authorize my iPhone 3GS& iPad to my Desktop & Laptop, my limit only left 1 time.
is't posible to delete the apple account and re-create, or reset the limit of account authorize?

Click here and follow the Deauthorize All instructions.
(60114)

Reservation authorization to limit plant on IW31,IW32

Dear all,
Could you please advise me about authorization check in
reservation created from maintenance order. I create role to use IW32
and maintain authorization to limit plant at authorization object
M_MRES_WWA. But we still create reservation from maintenance order all
plant but we cannot create reservation by MB21 except plant that we
maintain at authorization object.
I do not sure that I maintain it correctly or there are other way
to limit plant to create reservation from maintenance order.
Thank you.

Hi consult.,
I am not very sure about the object you are using, but if it is correct(else serch for the correct object), then make a master role for the T-Codes IW31 and IW32.
then make a drived role from the above made role, and assign the object(above searched object) in the object give the value as that of your plant, and activity as per the requirement.
you can maintain as many derived roles as the no. of plants.
hope it helps.
regards,
YK

Authorization Error Message

When I try to authorize I get this message
+There was an error storing your authorization information on this computer. The required directory was not found or has a permissions error. Correct this permissions problem and try again.+
I've already tried repairing permissions with Disk Utility, and I've trashed all of the iTunes files (other than the music of course) in the iTunes folder and the Preferences folder.
My iTunes purchases had been playing on this computer for years without problem until today.
How can I fix this problem? Is there a file I can trash somewhere?
Thanks for your suggestions.

Thanks for the gear reminder...I did read that somewhere. (I'm happy to run on Panther for now....)
Sorry...but I'm not sure what else to suggest. Perhaps someone else in the forum will have the answer.
Just curious...you haven't reached your limit of five authorizations, have you?

Restrict authorizations for loads from HR to BW for certain data

Hi,
our customer wants protect some data in the HR productive system. This data are defined/restricted by certain personal areas.
It is not enough to use reporting authorizations in BW to restrict presentation in queries or use filters in infopackets during load to avoid this data.
The requirement is to make load of such data from HR to BW absolutely impossible, even BW administrator cannot see them and must not be able to load them.
We will probably have to somehow limit ALEREMOTE users authorizations in BW. I do not know how and I even doubt, that extractors in HR source system perform authorizations checks for fields.
Is there any way to do this?
Thank you very much,
Petr

Hi Petr,
Create a general enhancement program (restricted authorization) with generic name, which should be called dynamically for every datasource.
Refer-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2d99121a-0e01-0010-e78c-b1ae566a2413?overridelayout=true
Not personally tested but check following.
In that program, you may try applying following logic:
1) You may need to use TYPE ANY field symbols
2) In While Loop until all fields of C_T_DATA checked, may be a counter based on total number of fields.
DELETE C_T_DATA where <TYPE_ANY1> EQ (OR use IN) specific value(s) of Personnel Area
DELETE C_T_DATA where <TYPE_ANY1> CS (Contains, check pattern) specific value(s) of Personnel Area
ENDWHILE.
Optionally: For Standard Daatsources in the same program you can add logic based on standard field only "WERKS".
Note: You may need to research on dynamic pointing using field symbols for every field.
Thanks
Arun Purohit

Authorization-Display report from InfoProvider-ODS

Hello,
Currently, I got some problems displaying data through the reports which were created from InfoProvider-ODS.
The authorization team already configure the authorization objects. Unfortunately, there was no data display from the queries at all.
One concern related to the authorized configuation is:
from checking authorization for dealer report in ODS model, we use auth. object: ZBPCODE which is dealer id value.
but it's not required only dealer id value, it require "*" for this object.
How do I limit in this authorization case?
Any suggestion would sincerely appreciate.
Thank you very much
-WJ-

Closed without solution!

Authorization Object for using Object Services

Can you tell me how to limit a users authorization to create or delete attachements using the object services functionality? We'd like to control the addition and deletion of the attachments. Is there a specific authorization object for this functionality?
Thank you, Julie

Hi julie;
I hope that following are the solution for you problem. Check wheather this is helpful to you or not.
Authorization Object C_DRAW_BGR (Authorization Group)
The following table shows authorization object C_DRAW_BGR. This authorization object allows you to limit access to individual documents.
Fields      Possible Values      Description
BEGRU (Authorization group)      0000 - ZZZZ      Used to restrict the authorizations for document maintenance further.
Authorization object C_DRAW_BGR can be used to restrict access to individual documents. It works like a simple on/off switch. If the check of object C_DRAW_BGR is fine, the user's authorization can be further restricted by checking C_DRAW_TCD (check only based on the document type) or C_DRAW_TCS (check of the
combination of document type and status). At the fifth level there is a BADI called DOCUMENT_AUTH01, which you can use to design your own authority check.
Authorization Object C_DRAW_DOK (Document Access)
The following table shows authorization object C_DRAW_DOK. This authorization object controls which original data of a specific document type there are access authorizations for.
Fields      Possible Values      Description
ACTVT (Activity)      52 53 54 55 56 57      Change application start Display application start Display archive application Change archive application Display archive Store archive
DOKAR (Document type)            Here you enter the document type that access to original data is allowed for.
Authorization Object C_DRAD_OBJ (Object Link)
The following table shows authorization object C_DRAD_OBJ. This object controls which users can process which document info records, based on a combination of activity, object, and status.
Fields      Possible Values      Description
ACTVT (Activity)      01 02 03 06      Create Change Display Delete
DOKOB (Object)            You must enter the data base table for the objects here (for example, MARA for material record).
STATUS (Document status)
if useful rewards points.
Regards,
nitin
Edited by: nitin bhagat on Feb 18, 2008 6:23 AM

How do I get rid of a computer that doesn't exist anymore from my iTunes account? The old computer has been recycled with my iTunes acoount on my current desktop. I neglected to remove iTunes prior to being recycled.

I'm continuing to have major issues getting iTunes to recognized my son's iPod Touch. It was last sync'd to the old computer more than a year ago. I've backed up and updated all iTunes material; Uninstalled iTunes and reinstalled; confirmed other iPods will connect. The only issue I'm having is with my son's Touch.

If you're referring to authorization, you cannot deauthorize a computer to which you no longer have access. Unless you've reached the limit of five authorizations, that shouldn't be a problem. If you have reached five authorizations for that account, there will be a button in your iTunes Store account information that will allow you to deauthorize all systems associated with that account. Log into your Store account and you should see it. You can then reauthorize the computers you're using now.
I'm not sure what this would have to do with an issue with an iPod touch, though. Can you please explain that issue in more detail?
Regards.

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

Letter of Credit amount information

Hi guys,
My client want the system should block delivery, when ever the amount of letter of credit below the invoice amount.
Can we map it in B1?
what is calculation field? and how could it be done?

Hi
Administration -> System Initialization -> General Settings -> BP tab,
select 'Customer Activity Restrictions'
Check the boxes, 'Credit Limit' and 'Delivery'
In the BP Master,
Business Partners ->Business Partner Master Data -> Payment Terms tab,
set the 'Credit Limit'
Go to 'Authorizations' window and select the user from the left window. From the Right window, select
'Confirm Credit Line Deviation' option under 'Sales A/R'. Set 'No Authorization' here.
This makes the user to restrict delivery when the credit limit exceeds.

My iPod keeps thinking I'm using a new computer

Since I bought my iPod Mini about 18 months ago I've had to format my hard drive several times as most people will do when Windows throws a wobbly every now and then. I keep backups off all my music and iTunes libraries.
My problem is that my iPod was registered for my current PC; but whenever I re-install iTunes and log into it I get a message saying I have used up one of the 5 times I'm allowed to register my iPod on a computer. What happens if I use up those 5 times? I haven't changed my computer or tried to put my iPod on a different computer, and yet it thinks I'm using a different PC each time I have to format it. I've searched the forums and looked about on the iTunes website but haven't seen anything that can help me with this. I don't want to be blocked out from using my iPod if something goes wrong with my PC in the future.
Thanks in advance to anyone who can help.
PC Windows XP
PC Windows XP

If you reached the limit of 5 authorizations, you can de-authorize them all once a year: About iTunes Music Store Authorisation and Deauthorisation

Computer got virus and lost everything

My dell got a major virus and crashed and lost everything, got new dell inspiron and downloaded Itunes will read i pod but wonr sync music do i have to reset ipod?

You can only deauthorize computers you still have physical access to. If you have reached the limit of 5 authorizations and need to authorize yet another machine you can always use the deauthorize all option described in this Apple support document. This procedure can only be performed once a year.
iTunes Store: About authorization and deauthorization
As for your other problem, see this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Unable to Open Query

Hello,
I have a user that is unable to open a query using the BEx Analyzer. The user is able to refresh workbooks, but cannot open queries using the Business Explorer Menu.. When selecting a query, the screen goes blank. I have tried this user's ID on my computer and it still does not work. We are running BEx 3.5.
Any help would be greatly appreciated.
Thanks!
Tina

It could be either or both. SAP BW has two, and potentially three, levels of security.
1) There could be custom Authorization Objects created to limit access to authorization-relevant InfoObjects. Any
InfoProvider where an authorization-relevant InfoObject exists will invoke this security.
2) BEx has some Authorization Objects required in order to do particular functions within the tools. Also, there are activities (e.g. create, read, modify, etc) that are associated to the objects.
3) If you're using the SAP BI Portal or SAP Enterprose Portal for your reporting, it has it's own set of Authorization Objects because you can setup tabs whereby you can restrict who can view specific tabs. For example, you can have a tab for Labor reports in your portal where only a select few people can even execute the reports. This would be desirous even though the data is security and the report would come back with no data.

Process having dynamic subqery in for loop cursor

I created a process that puts all retrieved rows into a collection. Users can select on quite a few columns, say unit, last_name, shift, etc. When the query is built based on users' inputs, I can't get it working using a For Loop Cursor (code 3.). But I tried and found out that sample 1 is working while sample 2 is not.
Can anyone please help? give advices or point to the right direction?
Thanks very much in advance!!!
DC
sample 1, works:
begin
:P8_TEST_CURSOR := '';
for c in ( select ename from emp ) loop
:P8_TEST_CURSOR := :P8_TEST_CURSOR || ', ' || c.ename;
end loop;
end;
sample 2, does not work:
declare
q varchar2(2000) := 'select ename from emp';
begin
:P8_TEST_CURSOR := '';
for c in q loop
:P8_TEST_CURSOR := :P8_TEST_CURSOR || ', ' || c.ename;
end loop;
end;
code 3, my actually pursuing code, sorry it's long:
declare
q varchar2(2000);
v_unit_id cpd_units.id%TYPE;
begin
q := 'select distinct e.user_id
, nvl(to_char(law_common.get_star_no(e.id)), ''-'') star_no
, nvl(e.last_nme, ''-'') last_name
, nvl(e.first_nme, ''-'') first_name
, nvl(e.MIDDLE_INITIAL, ''-'') middle_initial
, e.employee_no
, nvl(to_char(e.employee_position_cd), ''-'')
, nvl(w.uod_cd, e.cpd_unit_assigned_no) unit
, nvl(w.watch_cd, ''-'')
from cpd_employees e, dpv2wtch w
where e.status_i = ''Y''
and nvl(e.resignation_date, sysdate) >= sysdate
and e.employee_position_cd in (''9112'', ''9152'', ''9153'', ''9155'', ''9161'', ''9164'')
and e.user_id is not null
and w.ssn_no(+) = e.ssn
and e.user_id not in (select c001
from htmldb_collections
where collection_name = ''ACTIVITY''
if :P300_STAR_NO is not NULL then
q := q || ' and e.id = law_common.get_employee_id(:P300_STAR_NO)';
--q := q || ' and law_common.get_star_no(e.id) = :P300_STAR_NO';
end if;
if :P300_EMPLOYEE_NO is not NULL then
q := q || ' and e.employee_no = :P300_EMPLOYEE_NO';
end if;
if :P300_USER_ID is not NULL then
q := q || ' and e.user_id = :P300_USER_ID';
end if;
if :P300_LAST_NAME is not NULL then
q := q || ' and upper(e.last_nme) like ''' || upper(:P300_LAST_NAME) || '%''';
end if;
if :P300_FIRST_NAME is not NULL then
q := q || ' and upper(e.first_nme) like ''' || upper(:P300_FIRST_NAME) || '%''';
end if;
if :P300_EMPLOYEE_POSITION_CD is not NULL then
q := q || ' and e.employee_position_cd = :P300_EMPLOYEE_POSITION_CD';
end if;
if :P300_UNIT is not NULL then
q := q || ' and nvl(w.uod_cd, e.cpd_unit_assigned_no) = :P300_UNIT';
end if;
if :P300_WATCH_CD <> 'NULL' then
q := q || ' and w.watch_cd = :P300_WATCH_CD';
end if;
--htp.p('Limit Unit '||:P0_LIMIT_UNIT);
/* authorization of editing OWN, UNIT, or ALL recs */
if substr(:P0_PERMISSION, 1, 5) = 'QUERY' then
q := q || ' and e.user_id = v(''FLOW_USER'')';
elsif substr(:P0_PERMISSION, -4, 4) = 'UNIT' then
q := q || ' and coalesce(w.uod_cd, e.cpd_unit_assigned_no)= :P0_LIMIT_UNIT ';
end if;
htp.p('q: ' || q);
cursor q_c is q;
for c in ( q_c ) loop /* HOW CAN BE DYNAMIC ???? */
l_seq_id := htmldb_collection.add_member(
p_collection_name => 'OFFICER_ACTIVITY'
, p_c001 => c.user_id
, p_c002 => c.star_no
, p_c003 => c.last_name
, p_c004 => c.first_name
, p_c005 => c.middle_initial
, p_c006 => c.employee_no
, p_c007 => c.employee_position_cd
, p_c008 => c.unit
, p_c009 => c.watch_cd
, p_c050 => :P0_APP_USER
end loop;
end;

Come back to solve my need. I get the working test process:
declare
type ty_cursor is ref cursor;
my_cursor ty_cursor;
my_rec emp%rowtype;
l_num number := 7900;
q varchar2(2000) ;
l_using varchar2(200) := null;
begin
:P8_TEST_CURSOR := '';
q := 'select * from emp';
if :P8_ENAME is not null then
q := q || ' where ename like :P8_ENAME';
l_using := ':P8_ENAME';
end if;
if l_using is not null then
open my_cursor for q using :P8_ENAME; --l_using;
else
open my_cursor for q;
end if;
loop
fetch my_cursor into my_rec;
exit when my_cursor%notfound;
:P8_TEST_CURSOR := :P8_TEST_CURSOR || ', ' || my_rec.empno;
end loop;
end;
But I need
open my_cursor for q using l_using;
to be working since my application has several searchable columns for users and I have to put users' input search into l_using. It does NOT work: q got 'select * from emp where ename like :P8_ENAME' and l_using got ':P8_ENAME' at "open ...." statement.
How can I get this cursor opened dynamically?
Thanks again!
DC

Limit to UIU authorization

Similar Messages

Maybe you are looking for