Line Workflow for a PTO Model

Hi All
I have a question regarding which Standard Workflow should be associated to a PTO Model.
I could see a standard workflow - "Line Flow - ATO Model" but could not find anything for a PTO model.
Line Flow Generic does not look like a good choice because it does not have a Configurator node.
Pls guide.
Rgds
Vipul

@Vishal : Thanks for the reply.
After logging the question, I tried creating Transaction Type where I specified the Item Type to "PTO Model" and Workflow as "Line Flow - Generic".
Once I booked the order, I was able to see all the Option class and Items as different SO lines automatically (of the same line type). Once the workflow proceeded, the only difference that happened was that PTO Model and PTO Option Class lines remained booked and other (Standard Item) lines proceeded to Awaiting Shipping status.
After I Ship Confirmed the Standard Item Lines, the final status of PTO Model and PTO Option Class item lines became Closed and Standard Item Lines went into Status Picked.
The issue is thus resolved.
Rgds
Vipul

Similar Messages

  • PTO model item stuck at awaiting Fulfillment.

    Hi,
    I created an order with only PTO model item and no options and booked the order. Order Line followed the Line Flow-Generic, Bill Only process.
    Status is Awaiting Fulfillment..but even after running the WF Background process, it is stuck at awaiting fulfillment only.
    WF status monitor displays Notified at Fulfill Line node.
    I have checked for holds and fulfillment sets, they are not there.
    All pointers to the above problem are highly apprciated.
    Thanks,
    Rahul

    You may have a problem in how the model was setup or with the line type.
    1) Make sure that the line type is correct. Have you been able to ship PTO models using this line type?
    2) Go to BOM responsibility. Make sure you are in the org that is listed as warehouse on the sales order line. Open the INDENTED bom for the PTO item. Do you see option classes / ato models/ optional items. You have to have something there.
    Hope this answers your question
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant

  • Workflow for Sales Order Release via Status Profile

    Dear all,
    i want to make a workflow for sales order which have 4 User Status in One status profile.
    Once Event triggered for sales order
    1.   Mail should go to main authority with sales order number.
    2.  Once authority will do some changes in the required field then he/she changes
         the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
    3.  Once again same changes in sales order but now user status-2 from user status-1
         as per line Item and mail should go to department no-2 (Head authority).
    4.  Once again same changes in sales order but now user status-3 from user status-2
         as per line Item and mail should go to department no-3 (Head authority).
    5.  Once again same changes in sales order but now user status-4 from user status-3
         as per line Item and mail should go to department no-4 (Head authority) .
    and parrally for each changes of Status mail should also go to User (Event Creator).
    6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
    Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
    please help me out.
    Thank You

    Hi Neeraj,
    First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
    Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
    As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
    The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
    Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
    Just go with these things and let me know if you get stuck up somewhere.
    Regards,
    Guddan

  • Workflow for Document Approval

    Hi all,
    I'm a newbie to SolMan and is trying to figure out how to implement a workflow for document approval. A similar question has probably been posted in the past, but I can't find a definite solution, only some hints.
    Basically, what we're trying to achieve is the following:
    When a document is uploaded using SOLAR02, and the creator of the document changes the status to ready for sign-off, we would like to trigger a workflow which will send an email to a couple of persons who are responsible to approve the document. We already implement the digital signature, we just want to add an automatic email notification to be sent to the approvers.
    Based on my research, it seems that this is not supported by SolMan and hence we have to do a custom development.
    There's an object key called SOLMANDOC and we should raise an event (something like SIGNATURE_PROCESS_START) to send an email notification to the approvers. Can somebody confirm whether my understanding is right ? Does anybody know the name of the BADI that we can modify to achieve our goal ? 
    FYI, we're using SolMan Rel 7.01 SP 19.
    Thanks in advance
    Lara

    Hi Phil,
    I'm facing with problems with creating a simple 2 steps release strategy.
    the problem is I cant approve the last step of the release.
    This is what I did:
    In spro Digital Signature->Signature strategy:
    in "Define Authorization groups" I create this entries:
    1. EING
    2. VERIF
    in "Define Individual Signatures" I create this entries:
    1.  S1   EING
    2.  S2   VERIF
    in "Define Individual Strategies: I create this entries:
    SigStrat: ZSIGSTR
    Signature Method: R
    Display comment: X Required
    Display Remark: X
    Display document: X
    Verification: not checked
    in "Assign individual signatures"
    CtrIn  Indiv.SIG.      AGrpDIG
    1          S1               EING
    2          S2               VERIF
    Display Predecessor for Ctrln is 2 is 1
    for "Display release statuses"  an entry with one line with the value 1
    and in "Display individual signatures there 2 entries 1 and 2.
    in spro "Define Document status schemes"
    stat scheme "ZSIGSTR"
    4 status:
    Status                 init status      Sequence    Low     High       lock         Signature schma  End status         Cancel status
    COPY_EDITING       X                  10           10       20          -                    
    REVIEW                                     20           10        40        X                    ZSIGSTR         RELEASED    DECLINED
    RELEASED                                30           10        40        X                   
    DECLINED                                  40           10        20             
    I created two roles with object c_sign_bpr one with the value "EING"   and the other with the value "VERIF"
    I assign this status scheme to a document type in my project.
    I tried to release a document the first step was the author of the document move the status to "REVIEW" and I got a window that i need to enter my password and it worked ok.
    The problem is in the second step that I need to release the document (now is in a REVIEW status) When I press on the icon in order to release I didn't get the option to release only to cancel there is no "V" option in the small window.
    Can you please tell me if I did a correct customization? also can you tell me if my problem is maybe missing authorization? Can you direct me to reading material or to an example?
    Best regards
    Lior Grinberg
    Edited by: Lior Grinberg on Nov 28, 2011 6:22 PM

  • Command line parameters for automator?

    I'm trying to setup a cron job to so that every morning at 8 am "New Mail.workflow" will open and run. I'm able to get it to open but I was wondering if there were command line parameters for Automator that could open AND run a workflow file? Ideally I'd like it to close after running, but I'll worry about that later. Thanks in advance.

    The preferred way is to save your workflow as an application and then call usr/bin/open on it. If for some reason you must have the workflow run inside of Automator (not self-contained) then you're looking at some quality time with man osascript. As it happens Apple has removed even the need for Cron for most users. A click to File -> Save As Plug-In -> for iCal handles it from start to finish.
    Edit: I forgot to mention that Automator has its own simple command line utility for running *.workflow files. Check out man automator

  • Command line parameters for al_engine.exe

    If you go to a command line window on a DS server and type al_engine.exe with no parameters it prints "Usage" information.  Some of the parameters it mentions are known to the community (like -XX, -XI, etc).  However there are some which sound pretty interesting, but I can't find any information or examples how it should be used.  Examples:
    -L<list of value> : List of Object Labels from UI (separated by , or ; or space) to filter.
    -Je<XML file> Execute the Installation scenario defined in XML file.
    -jd"datastore delta file in quotes>" : Modify datastore values using "file"
    -Jf, -Ja, -We,  and many more.
    I am particularily interested in -Je functiohnality - it sounds like it can be used to automate deployment.  I am using import/export options to do some automation, but real automation would include deletion of some objects, adding jobs to projects, etc.
    Can anybody help with the documentation/examples?

    The preferred way is to save your workflow as an application and then call usr/bin/open on it. If for some reason you must have the workflow run inside of Automator (not self-contained) then you're looking at some quality time with man osascript. As it happens Apple has removed even the need for Cron for most users. A click to File -> Save As Plug-In -> for iCal handles it from start to finish.
    Edit: I forgot to mention that Automator has its own simple command line utility for running *.workflow files. Check out man automator

  • Workflow for P.O release process.

    Hi Guys,
    As per the one of the thread I have done setting as per the below. Ref last 10 line for the details of the problem.
    Hi,
    1) Work flow: - Work flow is standard functionality of SAP.
    I give one example to u.
    In the case of purchase order creation, First purchase person create purchase order, then first purchase order approved by purchase head and then auditor approved purchase order on print of purchase order.
    With work flow you can send soft copy of purchase order to both person purchase head and auditor to approve your purchase order.
    Due to this your process for purchase material is faster then manual process.
    2) You can implement work flow in purchase order release strategy with below mention detail.
    For mail facility, you need to activate workflow for PO release procedure;
    *Go to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders *
    Define Release Procedure for Purchase Orders > Release Codes >
    here assign Workflow indicator as "1" against each Release Code
    Now come to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders >
    Define Release Procedure for Purchase Orders > Workflow >
    Here against each release code assign OT as US and respective User ID's for Release Codes.
    Now Go to OOCU > here under MM, go to MM-PUR,
    Now click on "activate event linking"
    Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
    Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
    Same way and click on "Assign agents" and proceed all above steps.
    Now create a PO and check the SBWP for SAP Mail of respective Users
    This was the details given by the thread but now I have completed till
    OOCU > here under MM, go to MM-PUR,
    Now click on "activate event linking"
    Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
    Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
    For proceeding futher as said in the above procedure. I am getting User ID inside WS20000075 when I click on Assign Agents but I am not getting the details button to repeate the step as said.
    Please let me know whatever I have done is enough to get the mail or is there any thing else need to be done.
    Thanks
    Dhanu

    Hi,
    release code and release group should be assigned in the authorization object for the approving authorities.
    apart from this the settings looks ok and it will work

  • Single Step approval BRF Workflow for RFx.

    Hi,
    I am facing one problem in process controlled workflow for RFx. I have the scenario where I have only one approver but 7-8 reviewer are there in between of approver and initiator for example:
    Initiator >reviewer1>reviewer2->reviewer3->....reviewer8-->approver.
    For acheiving this I have activated standard single step approval workflow.
    But while I am trying to add reviewers to the RFx at the time of creation of RFx the system is not shwing the reviewers. it gets refreshed only reviewers line is added to the reviewers Tab but system did not display any reviewer.
    And while I publish the RFx it directly goes to the approver and while i tried to add the reviewer from approver end the same problem is coming.
    Please help me. How I cam achieve this functionality.
    Thanks & Regards,
    Sachin

    Hello Ashutosh,
    Thanks For your reply. I want to add reviewers at the time of creation of RFx not ad-hoc approvers.
    As I explain in my question that I have only one approver in whole approval process rest all are the reviewers only who only do the review and add comments not the approving authority.
    Thanks,
    Sachin

  • Not able to query the price of PTO model through Pricing and availability

    Hi all,
    I book an order for PTO model through OM, i get the prices displayed,
    if i query the same model through Pricing and availability form, to know the price, there is no item found in the LOV
    The same model in istore, shows no prices in the catalogs.
    What might be the reason??
    Regards,
    PRasad

    I think this could be because the configurations are created and priced dynamically at the time of order entry.

  • Workflow for purchase requisition?

    Dear all;
    I would like to know if there is any standar workflow for MM that can map this requeriment: user A creates a purchase requsition, the WF sends a mail to the user B to release it, user B releases it and then the WF sends a mail to user A to let him know the event.
    The WF should know how many approvals (if any) the purchase has, so it can adapt to any type of purchase
    Thank you very much!

    Hi f_mont.
    Workflow don't need a design with a loop because it is created a new workflow to each step of aproval. Standard program will trigger other workflow to next level and will trigger terminator event to already running.
    It's automatic and transparent to user and you. This follow the sequence of each aproval sequence depending of functional configuration about it.
    To get it ready to start and be triggered, ask to functional fill field in SPRO, with 1 (users of viwl T16FW) or 9 (EXIT). --> SPRO --> Materials management --> Purchasing --> Purchasing req. --> Release procedure ... --> Define Release procedure for PR...Release Codes --> Field workflow = 1 or 9.
    Configure the same number in rule PFAC in workflow step task to 20000027 and it will get automatic depending on configuration in 1 or 9. 1 is automatic and needs previous functional configuration and 9 needs that you encode some line codes in user exit EXIT_SAPLEBNF_005 (enhance M06E0005 in CMOD).
    I need to do the same here (for PO, contract and requisition), but here will be type 9 and I need to get users by profile in user exit.
    best regards.
    Glauco
    Edited by: Glauco Kubrusly on Jun 14, 2011 9:58 PM

  • Standard workflow for FB60 vendor invoice

    Dear experts,
    I am looking for a standard workflow for transaction FB60. Is that WS00400012(BO: BSEG)?
    I just wonder if I could check the link between a transaction and business object.
    In SWO1, BSEG is noted as "Accounting document line item". So i am not sure if it is for Vendor Invoice.

    There are several standard workflows for vendor invoices.  WS00400012 is for release of payment. If that is what you are looking for, it is fine. But go to the customizing to find more information about both the release for payment solution and the release for posting solution from SAP. Can't recall the customizing path now, but it is in Financial Accounting, I think the path is Accunts Receivable and Payable, then Business Transactions, and there you will at least find the Release for Payment part of it. The customizing screens are partly common, but the help available for the customizing nodes is most likely specific for each solution. I have never set up release for posting, so I don't know it.

  • Trigger workflow when PR changed and copmlete activ workflow for same PR

    Hi,
    i am triggering the workflow for all line item of PR when PR is created. now i want to create workflow when PR change also.
    but before triggering the workflow i have to check the any in process workflow for the same and if then complete is and delete all its work item.
    for Ex.
    PR -4500000001 created with item 10 workflow triggerd ,
    suppose i changed it and agan save next workflow trigged now before triggerin this workflow we have to complete the 1 instance of workflow , delete all workitem of that instant
    Please suggest how can i achive this .
    Thanks in Advance
    Deepanker Dwivedi

    Hello,
    We have already implemented this in our old  project.Please find below the solution.
    No config change is required.
    1.Go to tcode SWETYPV
    2. Double click on your linkage.
    3. You will see there check function module.
    4. MAke a custom custom function module of yours and it will have CDPOS and CDHDR as its component.
    5. When so pr is changed or created this function module will be triggered there you can identify whether pr is changed or not using cdpos and cdhdr.
    6. If it is change raise two events one for completeion of old worklfows which are in process second for creation of new workflow instance.
    7. Create a wait step in your workflow which will wait for the completion event to be raised.
    Hope it helps.
    Regards,
    Nabheet Madan

  • What is the workflow for creating templates in full FrameMaker and pushing them to XML Author?

    Hi All,
    I'm working for a large organization (3000+) that is subdivided into 60+ business units.  I'm trying to figure out the workflow for using full FrameMaker to create a template that I can provide my business units to fill in via XML Author, send back to me, and then I can publish into a number of products using the Tech. Comm. Suite.  I am somewhat new to XML so I am not sure how to get my structure and format to translate.
    Can anybody clarify what the general workflow would be for this process?  All I have been able to find is the flowchart showing full FM to XML to XML Author and back to full FM.  From my test driving of the Tech Comm Suite though it has not appeared that easy.
    ---Corey---

    Hi Corey...
    Here's a rough outline of what is needed.
    1) First, you'll need to define the data model that your documents are using. This could be some existing model like DITA or a new custom model. Depending on the complexity of your document's needs, this may drive that decision.
    2) Once you've got a model, you'll need to create a structure application (in full FM). This structure application defines the model and appearance of documents. This will provide the fundamental structure of the "template" as well as placeholder text for the elements where you want people to provide information.
    3) Then you have to install the structure application on each of the XML Author installations. This involves copying the structure application definitions file (structapps.fm) onto the client systems as well as the structure application files (into the proper location as indicated in the structure application definition). The structure application definition may reference these files at a network location, which might simplify the deployment, but would require that each person is connected to that network in order to create the files (pros/cons with this approach).
    Once that's set up, your XML Author users should (in theory) be able to create a new document using the new structure application, then send you the resulting files. Lots of hand waving here .. but that's the general idea.
    Cheers,
    Scott Prentice
    Leximation, Inc.
    www.leximation.com

  • Workflow for Reversing Invoice (FB08)

    Hi Gurus,
                  We are configuring Payment Release workflow for our project.
                  I am using the standard Workflow WS00400012  for the same and its working fine.
                  In the above mentioned workflow, if the payment release is rejected it will go the next step 'Change document line'
                  to change the line item and post again.
                  But now the requirement is, once the payment release is rejected system should do the invoice reversal for that
                  document (FB08).
                  Is this possible by customizing the standard workflow ?
                  If so, is there any business object or workflow to reverse invoice through FB08.
                  Please suggest me.
                   Thanks in advance,
                   Santosh.

    Hi Suresh,
                   Thanks for the reply.
                   I have checked those methods to display and edit documents.
                   Actually they are calling the Transaction code  directly and we can change the data manually and save.
                   But we want the workflow should take care of the reversing invoice without manual interaction.
                   Can i use any BAPI or FM in my custom method to meet my requirement ?
                      Thanks in advance,
                      Shyam.

  • Workflow for LIV- MIRO

    Hi SAP Guru
    I want to activate workflow for Logistic invoice verification (MIRO)
    My requirement is :- At the time of MIRO , system will post a payment bolck (say "P") and will not allow to make payment to the users and it will trigger a workflow . Once the same is release by the designated person ( in workflow) then only system should allow payment posting for the invoice.
    Pls let me know how to activate this workflow.
    Is it possible in standard system or we need to develop a workflow.?
    pls let me know how to go about this
    Regards
    Ajay

    hi,
    Single click is possible if you have maintained all the defaults as below,
    1. Your PO qty will always be equal to your GR qty (so you need nt change the GR qty)
    2. Sloc populate frm the PO (so no need to key the sloc)
    3. Make the default OK in the MIGO default setting.
    and if all this done then as soon you enter the PO  and line item number you can just save it.
    For MIRO,
    Just make the ERS setting then no need to do any MIRO.
    Thanks,
    Suresh

Maybe you are looking for