Link to file hyperlinks

How to create an InDesign document with link to file hyperlinks in InDesign to PDF and still be able to use via a USB flash drive?

Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul

Similar Messages

Linking KN9 files together using hyperlinks, fades to black

When linking KN9 files together using hyperlinks, I press play the document being linked to fades in, then out to a black screen and after a couple of seconds returns to the files open files on my desktop.
I've checked all the setting and it even does it on 2 empty pages I tested with no transitions or document settings.
If I open both document before pressing play it's OK but because I have several large files being linked together I dont want to have to open all the files before presenting to clients etc.
Thanks!

The History
I reported the hyperlinking problem over a year ago when I updated Keynote from version 5.0.5 to version 5.1. According to the Apple tech that I wroked with at that time the Apple engineers had reproduced the issue and had put it on the fix list (Case 235638615). I then worked with Apple in December 2011 to test a version that supposedly fixed the problem, but did not, so Apple sent me a data logging monitor program which I ran and sent back. The Apple tech asked me to be patient as it might take awhile for the Apple engineers to fix the issue. When version 5.2 came out I reran my testing suite of presentations and found that the hyperlinking issue had still not been fixed. I have tried to contact Apple about my case since July 26th - my emails to the Apple tech with whom I worked back in December bounce back as undeliverable and he does not answer his phone (I have left messages with no replies) plus when I try to use Apple support to follow up on the case, all I get is a message to contact my Apple tech (Doh!). If Apple techs or Apple engineers watch the forums I hope they look into unresolved Case 235638615.
The Workaround
Hyperlinking worked fine with 5.0.5 - the .key files would load and display and did not have to be preloaded prior to runing the linked presentations. Version 5.1 through the current version 5.2 require all of the linked presentations to be preloaded prior to running them. Prior to the current version of Lion, I was able to manually run version 5.0.5 to successfully run my system of 32 presentations. The only downsides were that I could not use any transitions or animations introduced with version 5.1 and I had to force quit Keynote 5.0.5. However, when I tried that solution this month, it would not work. So I created an Automator app to load the appropriate subset of presentations for each day of the five day class and used version 5.2. Everything went okay with preloaded presentations.
I love using Keynote and do not want to go back to PowerPoint, so I hope Apple fixes this issue. I think we have been more than patient with the Apple engineers.

Flash File Gets a White Border on Page loaded and link changes to hyperlink

Hi,
Flash File Gets a White Border on Page loaded and the mouse
pointer changes to hyperlink Pls Help Its caused only in a System
which has Win XP or higher version U can view the Bug at "
www.prosystems.in"
Regards,
Francis

> Also, I need to link the file a URL and putting <a
href> brackets around it is
> not working. Does the link to the page have to embedded
in the swf file?
wrapping an A HREF tag around a flash .swf object will not
work.
the link has to be "in" the swf, back when it was an FLA file
in flash.
Or- the .swf has to have actionscripting in it so that it
will take a url as
a parameter.
On the flash not showing--
Random observations from a quick look.
There is no \ backslash in a web path or url.
you can usually "get away with it" on a windows server, but
it's incorrect
and something to avoid.

<link type="text/css" rel="stylesheet"
href="build\fonts\fonts.css">

<script type="text/javascript"
src="build\yahoo\yahoo.js"></script>
<script type="text/javascript"
src="build\dom\dom.js"></script>
<script type="text/javascript"
src="build\event\event.js"></script>

<script type="text/javascript"
src="build\calendar\calendar.js"></script>
<link rel="stylesheet" type="text/css"
href="build\calendar\assets\calendar.css" >
The javascript call to show the flash file contains an
absolute local path:
'file:///Macintosh HD/Users/user/Documents/ Work/Nimble Press
/Grant
Wrangler/Website/GW ADs/tiged
The noscript tag uses an absolute local path:
<param name="movie" value="file:///Macintosh
HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf">
<param name="quality" value="high">
<embed src="file:///Macintosh HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf" quality="high"
pluginspage="
http://www.adobe.com
it's also not a good idea to put things in a folder using a
blank space, and
whose name contains the word "ADs"
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Link to files in iWeb

Newbie to iWeb! I have created a site in iWeb, and want to create links to pages (.htm) generated by another program (Reunion). When I try to create the links I can't get iWeb to bring up the "linked" page. I've tried using link to file (clearly wrong) and link to external page, without success. If this should be possible in iweb, how to do it please? Where should my "external" pages be located?
Thanks.

Where should my "external" pages be located?
Welcome to the discussions. They should be published to a server. "External page" is the option to use. ...Does the URL you're trying to enter into iWeb's Link inspector work if you enter it into a browser's address bar? ...If not, it's not going to work in iWeb either.
Did you check the "Make hyperlinks active" box? If you do that, you should be able to click on the hyperlinked element and go to that page. If you haven't checked that box, the hyperlinked element won't become active until you've published the page and clicked on the element in a browser.

IWeb File-Hyperlink issue

Hi,
i want to create a File Hyperlink (the file is a .pdf-file). When I upload the file to the server and try the hyplerlink online it does not work. Anybody the same experience?
All other Hyperlinks I use work except the File-Hyperlinks! There is just 1 File-Hyperlink which works but I really do not know why!
Thanks!

Hi, Welcome to the forums.
Are you physically uploading the file yourself? If so does the location where you upload it to match the URL of the link.
iWeb should automatically upload any file you link to on your Mac, I have a tutorial on my site:
http://allaboutiweb.com/index.php/2008/12/adding-a-file-to-download-from-your-iw eb-site/
AAi
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Linking to File

Hello All,
time for round # 2 of questions.
I'm trying to insert a hyperlink to an external file which is
an XLS.
i use the interface chose file, browse to the file and insert
it. when i get prompted to copy the file in to the project folder i
say yes.
i use the preview feature in RH (CTRL + W) and the link works
fine. The problem is when i generate the flash help,
the link does not work on single click. if i do right click
save as works fine.
when i hover over the link it shows
"file:///C:/outpufolder/filename.xls" with no spaces and/or special
characters. the only difference i see is that in the preview the
link shows "file://filepath"
what would cause that third slash to appear in the final
product?
any help is appreciated.
Thanks

Welcome to our community, Erluk9
My guess is the difference in link slashes or whatever is
simply a red herring. Odds are you are experiencing an issue impose
by the Mark Of The Web option. With MOTW enabled, links to other
content will fail when you test locally. The good news is that once
you deploy to a server, the issues vanish.
Cheers... Rick

How to link pdf file in flash by xml ??

how to link pdf file in flash by xml ??

try to give <a href="your address">My Pdf</a>
and your textfield should be html enabled
mytextField.html=true
mytextField.htmlText=your xml text

How to link Excel file to Access

Hello,
I created a barcode database using excel and labview. Now i want this data to be in access as a database and continuosly update it.
I have a doubt also as i have created excel sheet of various product barcode and there is always a new sheet that is saved when ever working( this is a requirement) so how can i link all the file and creat one access database.
Thanks in advance, Need urgent help
Regards
Naman Vaidya

sorry for the confusion.
i want labview to link my excel and acess, so that a database is created.
second thing is i am having verious barcode data like for eg. for product X i have a particular barcode and for product Y another so my software create a new excel file whenever we change a product or a particular quantity of any product is filled. Now the question is if everytime i creat a new excel how do i creat a single database by linking all files using labview.
Thanks for the reply.

Shockwave won't play linked Director files from server

I created a bunch of director files for the course content of my class. All can be accessed from a contents file. When I created an html contents file on my desktop (in the same folder as the linked director files), the contents pages would open in shockwave in my browser (both Firefox and Safari) and then by clicking on a link other director files would open and play. However, when all these files were place on our server (in the same folder), only the contents pages would open and we get an error message saying the dirctor files cannot be opened. I think this means it sees them, but can't open them.
Help!

Hi Sean
   sorry if my e-mail was a bit whiney, but I got a bit frustrated,
having tried to use the Adobe website for help and then trying for
help over the phone. Adobe has this nice thing where they will call
you back instead of you sitting on hold, which I used at first, but
you get called back by a machine, not a person, then you subsequently
get a progression of robocalls with nobody on the other end! I
finally just sat and waited and got a person, who seemed
knowledgeable and nice, but couldn't help me without a payment. So, I
would greatly appreciate any help you could provide!
       What I have is this. I constructed a "book" in CD form for my
class. This is based on CDs that Mike Coleman and I published a few
years ago. A picture of the contents page is shown below. Each topic
is in a separate Director file, each with its own casts. We made a
lot of animations, some in Flash and some in Quicktime that appear in
each topic. I redid everything in Director 11.5, changing text
spacing because of the way things get altered when things get played
in Shockwave! When I click on one of these subtopics, the
corresponding Director file opens. I accomplished linkage this by
appending a behavior to the text, "Play Movie X". I then originally
made a projector file of the contents page and distributed the CD to
my class free (textbook prices are getting out of hand). Now I want
to put it on the web, because I'm tired of burning CDs and we're
getting students from other locations taking the course on-line. So
within the folder on my desktop that held all the Director files, I
made a second folder "dswMedia" into which I placed all the
animations. I also linked all the animation casts to the Contents
Director file. I then constructed a Contents.html file and
Contents.dcr file using the Publish commands in Director. When I
click on the Contents.html file within my main folder (the one
holding all the Director files and the dswMedia file) the page opens
nicely in my browser (Firefox) and I can play all the Director movies
by clicking on each topic. All the animations play beautifully.
Great , I thought, I'm in business. I then took the files to our
media guy who put it on the server, in the same form as on my
desktop. If we click on the Contents.html file through the web it
opens. Clicking on a topic does not open that Director Movie. The
error message is not that it can't find the movie, however, but that
it can't open it. Everything works just fine on our media guys
computer, we only have a problem when we attempt to use this stuff
through the web. (Our web guy's computer does not have Director, so
that's not the issue).
      Any guidance would be greatly appreciated!
         Regards
                Paul

I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it.

I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like. I am trying to drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though. I tried resetting the folder, and deleting the DS files. No luck.

You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
Thomas Cannon Jr.

How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

CS3:How to link a file to a InDesign document?

Hello all,<br /><br />I looked at in the LinkWatcher sample code to get an idea how to link a file to a document, I came up with the code below, the last line of code needs pageitemUID instead of pageUID which I used it here:<br /><br />IDFile outFile = Utils<ImyUtils>()->getMyFile(); // it reads the file <br />InterfacePtr<IDataLinkHelper> dataLinkHelper(::CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)); <br />InterfacePtr<IDataLink> dataLinkNew(dataLinkHelper->CreateDataLink(outFile)); <br /><br />IDocument* theFrontDoc = Utils<ILayoutUIUtils>()->GetFrontDocument();<br />IDataBase* database = ::GetDataBase(theFrontDoc); <br /><br />InterfacePtr<IDocument> piDoc(theFrontDoc, UseDefaultIID()); <br /><br />InterfacePtr<IPageList> pageList(piDoc, UseDefaultIID()); <br /> <br />UID pageUID(kInvalidUID);<br /><br />if (pageList->GetPageCount() > 0)<br /> {<br /> pageUID = pageList->GetNthPageUID(0);<br />}<br />// I try to link the file to the front document, although it say pageitemUID, as a second //parameter, but I don't want to link the file to a particular page item. is this a right thing to do?<br /><br />int32 result = dataLinkHelper->AddDataLink(database,pageUID, dataLinkNew); <br /><br />as I execute the code it doesn't add the file in Link palette in CS3, but when I pass a UID of one page item such as text frame, it will add the name of file to link palette with a "1" comes to end of row that shows how many times this file was included in the frame. but in case I have not a page item can I use the pageUID instead ?<br /><br />Thanks In Advance,<br />Mor

Lee,
Sorry I think I didn't use the right terminology, somehow I want to include/link the file (not with menu item 'place') programmatically in my current open Indesign document, then I expect to see the filename in Link palette. I can do this with linking to a page item in doc but I don't want to assign it to a particular page item, rather I want to assign it to doc. Is any approach to do it?
Thanks again,
Mor

Need to link 2 files, one with a numeric firld and on with an alpha numeric

I need to link 2 files in my report by employee number. In the employee file it is an 8 character Numeric field like 1505087. In the GL File, it is an 8 character field like '01505087' I have done a TONUMBER on the employee number. Where do I link these files? I have done it in my data selection, but it now takes hours to run the report. The report does work. Any suggestions for linking the files together?
Thanks,
Rick

Hi Rick,
Linking numeric and non numeric fields at report level takes long time because for each detail it has to process i.e convert your non numeric field to numeric and then link.
To avoice this, try to use Add command for your non numerica table and convert the field to numeric in free hand SQL itself.
Eg: Select fields..convert(non numeric to numeric) from table // my convert syntex is not correct becasue i don't know what database you are using
Now you get both tables with numeric fields and you can link both. It will not take much time to retive records.
Thanks,
Sastry

Illustrator CS2 adds mysterious white dashed line thru my linked Photoshop file

Im using Windows XP, Illustrator & Photoshop CS2, Acrobat 7.0 Professional.
I have an illustrator file with a linked PSD file that has this mysterious thin white dashed line going through the entire image & I have no idea what it's from or how to repair it.
My trouble shooting thus far includes:
- In illustrator - I hide all the layers to see if there was an odd graphic on another layer that was causing the line, nothing. I tried to select the dashed line, not possible. I've created a PDF of the file, and the dashed line is in the PDF too (to verify it wasn't just Illustrator). Oddly in both Acrobat & Illustrator when I zoom in & zoom out, the dashes maintain their on-screen viewing proportions (like the dash spaces recalculate to the same tiny thin dashed line no matter what zoom Im at)
- In Photoshop - I zoomed in until I couldn't zoom no more and there is not the slightest dashed line in the graphic.
Lastly, I have this exact linked setup repeated throughout several different files (basically its the same ad but laid out to different dimensions for each)... and none of the others have this mysterious white dashed line.
here's a screen capture from Acrobat... zoomed into 6400%
argh - can someone help? Thanks!
kristin

Hi guys (and sorry for the tremendous delayed response).
No the line doesn't print on my local b/w laser printer. However I have seen the lines print in 1 newspaper publications... (this is out of 50 different publications)
Yes, the image is rotated slightly in illustrator, and I always flatten prior to making the PDF (cuz of the transparency/drop shadow).
It's really making me nervous that ALL our ads have these lines appearing during onscreen viewing... Im making a new batch of ads for our campaign & there are more lines than before!
Any tips theories remedies my friends?

Acrobat X 10.02 crashes when converting Word 2007 document wiht linked Visio file.

Acrobat X 10.02 crashes when converting Word 2007 document with linked Visio file and causes a C++ runtime error in Word and crashes Word.
To see the behavior create a short Word 2007 document with a linked Visio file (e.g., create a Visio file with one box and text and insert it as a link into a Word docx).
No problem in Acrobat 9

There may be some of an issue with AA X on this, but part of the blame probably goes to MS also. I would suggest you simply clip the graphic from VISIO as a vector graphic (EMF will be used by default) and not do the link and do not embed the VISIO object. The linking and use of embedded objects in WORD 2007 seems to have been a major problem and is mostly a MS issue.

Link to file hyperlinks

Similar Messages

Maybe you are looking for