Linkage and Export in first/second frame question

I just change my publish setting in my file to export classes
in the 2nd
frame, so I can have my preloader working in the first frame.
Then I
change the linkage to several MCs that I was attaching
dynamically in
frame 3. All I did there was unclick the export in frame one
checkbox.
After doing these things, my attachMovie does not work
anymore. Why?
Shoudn't all the movie linkage get exported in frame 2 and
then work as
before in frame three? I had a look at the bandwidth profiler
and it all
looks good, with the most of bandwith being used on frame 2.
Thank you for any help with this!

Does the same thing happen if you just export to your desktop, and then import to iTunes?
One solution is to move your entire song over by a beat or a measure or so before you export. For example, have the whole song start on the downbeat of measure 2. If it turns out that that lines things up perfectly in iTunes, problem solved.
Alternatively, you could export with the extra space in the front and then open up your stereo audio file in a simple audio editor (there are free ones floating around out there), trim off the front so that it precisely triggers at the downbeat, and then import into iTunes.
Perhaps someone else might know of a better way or a setting or something that avoids the problem in the first place!

Similar Messages

  • AddChild + "export in first frame" unchecked

    Hi all,
    i've got this problem that i can't figured out. i've tried
    google and adobe website, but no luck. i guess the people here
    could help me
    this is about addchild and export in first frame. i wanna
    call an object from my library. in its linkage option i:
    1. name it "rectangle"
    2. give a class name "Rect"
    3. have a base class "flash.display.MovieClip"
    4. check "export for Actionscript"
    5. unchecked "import in first frame"
    no problem this far.
    but when i tried to call it in main timeline with this
    script:
    var a:Rect = new Rect();
    addChild(a);
    i got this error:
    1046: Type was not found or was not a compile-time constant:
    Rect.
    1180: Call to a possibly undefined method Rect.
    why is that?
    isn't flash automatically generate the class for me?
    (a definition of this class could not be found in the
    classpath, so one will be automatically generated in the SWF file
    upon export.)
    can anyone help with my problem...

    because you haven't done anything to export your class.
    if you're not going to let flash take care of exporting your
    class in the first frame, you have to do something to export it
    later. and you're not and flash won't do that automatically
    becauese it doesn't know what you want to do.

  • I am trying to export a video I have made in FCP 10.0.8 to Youtube or to a master file and I keep on getting an error -50, or "error exporting master file at frame 20074" Any ideas?

    Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine.  I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing.  Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error.  It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in.  Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
    Any help would be much appreciated.
    Gerry

    Hi Russ,
    Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
    I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec.  I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app.  Any ideas?
    Thanks
    Gerry

  • Exporting movies in iPhoto using 'Current' Setting, exports the first frame only

    Hi,
    When I export my iPhoto library into separate events using the 'Current' Setting, it exports all video / movie files as the original file type with a single frame in it. 
    I don't want to go through each event and drag and drop each video to the exported folder as that would be an enormous pain.  Does anyone have ideas to fix this?  I have edited some photos, so I don't want to export as 'original' if possible
    Thanks!
    iPhoto has the latest updates installed and the original videos play perfectly in iPhoto.

    Yeah, I have upgraded from previous iPhoto versions, some videos are a few years old (.MOV iPhone format) and some are only a few months old (Canon EOS .MOV format), both export only first frame.  I might have to recreate my iPhoto library and start fresh!  Currently I am exporting as 'Original' and 'Current' to two different folders, and just grabbing the videos from the original and replacing the videos in the 'Current' folder.
    LarryHN's solution works well, but when I add a second condition to select a specific event, I can't choose from a list of specific events (unlike albums).  Entering in the event title (in the Event condition) sometimes adds videos from silmilar titled events.

  • Premiere CC 7.1 - Red frames in playback and export

    Having some problems after the 7.1 update.
    In a variety of projects, on a variety of footage, we're experiencing random fully red frames (#ff000). Sometimes there are 1-2 frames in a clip, and occaisionally it's 80%-90% of the frames in a clip (this is less frequent). It has never been all of the frames of a clip.
    This happens:
    - On an undrendered timeline (you'll be watching an edit and you'll see a red frame - if you scrub back to it it'll still be there)
    - On a rendered timeline
    - In exports
    Red frames that are visible on a timeline, are sometimes carried through to the export and sometimes not. Sometimes an exported file will display red frames that were not present on the timeline.
    Red frames seem to be based on clips, not sequence frames. For example, in one of my exports, I had video footage with a lower third graphic over it. In one frame of the export, a red box appeared over the graphic, but the main shot was not affected.
    This has happened to the following types of footage:
    - .MTS (from C100)
    - .MXF (from C300)
    - ProRes 422 MOV
    - ProRes 4444 MOV with alpha channel
    Fixes that seem to work:
    - If an export has red frames, re-export. Watch the new one like a hawk. Repeat until you get lucky.
    - If a clip on a timeline has red frames, force a re-render via a Crop filter or similar
    - Quit Premiere and reopen it
    System/environment details:
    - OSX 10.8.5
    - Premiere Pro CC 7.1
    - Mercury Playback Engine Software Only
    - Often (always?) I-Frame Only MPEG sequence settings
    - Much (all?) of the footage we've been working with has been on AFP shares via GigE with MTU of 9000
    I haven't been able to confirm yet:
    - Whether this ever happens with locally stored footage
    - Whether this ever happens when Queueing to media encoder (rather than Exporting from Premiere)
    - Whether changing to a QuickTime Desktop based sequence setting resolves the issue
    Is anyone else experiencing this issue? It's frutstratingly un-testable, since it seems to happen at random. We'll continue to gather data points though and see if we notice any other trends.
    Edit: Added additional system context

    the error also appears with PRORES 422 files, but only after a certain amount of source data from prores 422 clips is processed / read
    i made a test comp in AE with only one gigantic prores 422 source clip (8000 pixels x 1000 pixels @25fps) and the error first appeared at around 1500 frames read from the source file (equalling a few GB of source read and processed). after the red frames error appears once, the erroneous red frames appear more often but never in the same place when rendering the same comp several times)
    i also made a test comp containing only a few full HD prores 422 clips (1920 x 1080, @25fps), there the error appeared only seldom (but still randomly). so it can be that a broader user base never experiences this erroneous behaviour at all.
    i also made a testcomp containing about 40 full HD prores 422 clips (each 1920 x 1080, scaled down to 10% in size and distributed all over the comp so i can see them all at once). the erroneous red frames appeared within the first rendered frames!! obviously, many qt files had to be open and read in parallel, and so the error appeared from the very beginning of the rendering / export.
    i suspect that the AE / PR applications open a RAM buffer for each open prores source file they need to read, and that this buffers somehow becomes compromised when it overflows and when buffer resize / buffer clear / flush operations take place.
    of course i tested all sorts of RAM assignents for MP rendering (1GB per core, 2GB, 4GB, 6GB) and i rendered with several different settings of how many cores and ram should be available to other tasks. but the error always appeared. randomly.
    --> fact in AE is, that nearly all MP renders / exports using prores clips as source files contained the bad red frames. when rendering without the MP option on (but of course up to 20x slower) so far i never experienced this error (of course always after fresh restarts once the error appeared)
    PLEASE FIX THIS ASAP
    mac pro 2011, 12 cores, osx 10.8.5, 64 GB ram, angelbird SSD, ati hd radeon 5770 1GB

  • Indesign CS3 text frame parameters and export PDF

    could use some help with the following:
    I need to edit and export a large number (7000) Indesign documents (one page)
    1. check for locked text frames and unlock
    2. group all text frames
    3. set grouped text frames at x=8 millimeters, y 10 milimeters
    4. export the documents to PDF in a subfolder called "Out"
    5. save and close the documents in the same subfolder as an Indesign CS3 document (orig is CS2)
    This is what I've been trying soo far:
    Now only checking one text frame - should be all text frames
    "close document 1 saving yes" doesn't work because the originals are from CS2
    I get a PDF called "Adobe Indesign SC3"
    set processFolder to choose folder with prompt "Choose a folder that contains Innd Docs to process"
    tell application "Finder"
    if not (exists folder "OUT" of processFolder) then
    make new folder at processFolder with properties {name:"OUT"}
    end if
    set the destination_folder to folder "OUT" of processFolder as alias
    end tell
    tell application "Finder"
    try
    set listFiles to (files of contents of processFolder) as alias list
    on error
    set listFiles to (files of contents of processFolder) as alias as list
    end try
    repeat with thisFile in listFiles
    tell application "Adobe InDesign CS3"
    with timeout of 120 seconds
    activate
    set properties of view preferences to {horizontal measurement units:millimeters, vertical measurement units:millimeters, ruler origin:page origin}
    open thisFile
    set myDoc to document 1
    set docName to name
    tell myDoc
    set transform reference point of layout window 1 to top left anchor
    set myBox to text frame 1 of page 1
    set properties of myBox to {locked:false}
    move myBox to {8, 10}
    end tell
    export document 1 format PDF type to (destination_folder as string) & docName & ".pdf" using PDF export preset "[Drukwerkkwaliteit]" without showing options
    close document 1 saving yes
    tell application "Finder" to move thisFile to destination_folder with replacing
    end timeout
    end tell
    end repeat
    end tell
    end
    end
    Any help is greatly appreciated - Doing this manually is a lot of work!!!!!
    Peter

    You're asking for the name of the application, not the document -- you need<br />to do it after your "tell myDoc".<br /><br />You could also get the name from the alias you open, rather than the open<br />document, something like:<br /><br />repeat with thisFile in listFiles<br />set oldDelims to AppleScript's text item delimiters<br />set AppleScript's text item delimiters to {":"}<br />set docName to text item -1 of (thisFile as Unicode text)<br />set AppleScript's text item delimiters to oldDelims<br /><br />You should also move your "set properties of view preferences" line to after<br />your "tell myDoc".<br /><br />-- <br />Shane Stanley <[email protected]>

  • Export in first frame

    I have some large movie clips that I don't want to load in
    the first frame. So in my publish settings I set my classes to load
    in frame 3. Then I've turned off "Export in first frame" for my
    large movie clips and place them on the stage in frame 2. I've
    placed a simple "loading" message in frame 1 and 2. This worked in
    AS2, but in AS3 my movie clips are invisible when I turn off
    "Export in first frame". I think they are invisible because I'm
    making a game and there are bullets being fired from the x and x
    coordinates of were the enemies should be.
    Does anyone have any suggestions?
    Thanks!

    because you haven't done anything to export your class.
    if you're not going to let flash take care of exporting your
    class in the first frame, you have to do something to export it
    later. and you're not and flash won't do that automatically
    becauese it doesn't know what you want to do.

  • Blank second page and export error in Crystal 10 Web Report Viewer

    We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer.  When they view a report that is 12 pages, the first page appears OK.  When they click Next to go to the Next page, the page shows as blank.  The second issue is that If they try to export the .rpt they get this error:
    Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack trace:
    [COMException (0x80000220): Access denied.
    Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.]
          CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
    CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
    [LoadSaveReportException: Access denied.
    Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.]
    CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
    CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
    CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
    I can view and export the same .rpt file in my environment without any issues.  Has anyone seen these errors before and have any ideas on how to resolve them?  They seem to be environment related since I can view the same report OK on my machine.
    This is using Crystal 10 on Windows Server 2003.

    Hello,
    This sounds like a postback issue. Does your application handle postback by putting the report in session?
    There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
    The basic code is:
    Private crReportDocument As ReportDocument
        Private Sub ConfigureCrystalReports()
            'Check to see if the report exists
            If (Session("crReportDocument") Is Nothing) Then
                crReportDocument = New ReportDocument()
                crReportDocument.Load("C:\1 - Report\CRParams.rpt")
                'Do anything required for the report
                'Logon to the database
                'Pass parameters
                'Assign the report into Session
                Session("crReportDocument") = crReportDocument
                'Assign the report to the Viewer
                myCrystalReportViewer.ReportSource = crReportDocument
            Else
                'Assign the report that is stored in Session to the report instance.
                crReportDocument = CType(Session("crReportDocument"), ReportDocument)
                'Assign the report to the Viewer for each postback
                myCrystalReportViewer.ReportSource = crReportDocument
            End If
        End Sub
    Elaine

  • Exported movies only have first few frames of audio

    Hello everyone,
    I've encountered a strange new problem with Premiere Pro CC on the PC.
    For some reason, every time I export a movie now, no matter the format, it only contains the first few frames of audio then drops out everything else immediately afterward. The video tends to play fine, but the audio is just completely missing after a few frames.
    I feel as though it's some sort of muxing issue, but I do not understand why it is happening
    1. I have not had any major software updates, and my hardware has been the same.
    2. I have tried exporting with and without GPU acceleration.
    3. Just three days ago, on April 4, everything was working fine.
    4. When I open the project on my MacBook Pro, everything exports just fine.
    5. The audio always plays just fine when playing it inside the project, both on my PC and my MacBook Pro.
    6. A seemingly related issue is that some videos have been randomly failing exports in Media Encoder (this has never happened when exporting directly from PrPro, though). The error message I get is:
    - Encoding Time: 00:04:18
    04/07/2014 03:21:12 AM : Encoding Failed
    A low-level exception occurred in: H.264 (Exporter)
    Export Error
    Error compiling movie.
    Unknown error.
    Does this have something to do with a recent PC Premiere Pro update that I was not aware of?
    Here are my specs:
    Windows 7 Ultimate
    Intel Core2 Quad CPUQ 9550 2.83 ghz
    8 gigs of ram
    NVIDIA Geforce GTX 650
    Audio is going through the motherboard, though I also have NVIDIA High Definition Audio and NVIDIA Virtual Audio Device (Wave Extensible) (WDM) installed.
    I am also currently working off of external G-DRIVEs.
    Anyone have any idea why this could be happening? This has been a very annoying problem.
    I am going to try reinstalling PrPro to see if that will fix things.

    I have viewed these files in Windows Media Player, VLC, Quicktime, and Media Player Classic. All have the exact same issue. They also have the exact same issue when played on a different computer (a MacBook Pro) with the same players. I have tried exporting in H.264 (.mp4 container) and MPEG2, same issue. They also have the same issue when I import the file I exported back into PrPro to play it back in there.
    When I export on my MacBook Pro with Premiere Pro, everything works fine. This leads me to believe that it's either something wrong with the installation on my PC's version of PrPro or some hardware/software is interacting with my version of PrPro strangely, the latter of which I think is somewhat unlikely since it was working fine just three days before this issue came up.
    When I re-installed PrPro, it gave me an error saying some optional components could not be installed. I looked into it, and it said that it could not install Visual Basic C++ 2008. which is fine since I already have it installed (both 2008 and 2010, and x86 and x64 versions of both).
    I will try exporting one more time to see if the latest update today has somehow resolved the issue.

  • I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
    It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
    You could also list any relevant error messages you encounter.
    What version of FCP X are you using?
    All these things will make it easier for people to help you.
    Andy

  • HT5312 i could not follow anything, it needs to be clearer, and i all i wanted was to find the answers to my questions, you told me how to make an itunes account. and i'm pretty sure the questions used to be "first teacher" and "favorite teacher"not partn

    HELP i just could not figure out how to find the answers to my security questions, and i do believe that the questions used to be "who was your first teacher" and "who was your favorite teacher" but now the second one is "where did you and your partner go on there first trip together, so now i'm wondering if i dont even have the answers anymore! why, have you changed the questions, and i really am having trouble following the help pages. i need help, it wont let me buy any songs or apps, so i've been saving the links and names to songs.

    We are fellow users on these forums, you're not talking to Apple or iTunes Support.
    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use.

  • I have an iPod 5th generation and it is my second iPod but when I try to buy a song it says I need to answer security questions but they are ones I don't recognize or know the awnser to!! Help!!

    My second iPod is a 5th generation and when I try to buy something it says it needs make sure I am who I say I am and it makes me answer security questions. But the problem is I don't know the answers to them. I did not choose them. And if I can't find an answer I can't buy anything!!! Help!!!!

    You need to log in to your Apple ID and change you security questions.  Take a look at this link, http://www.apple.com/support/appleid/

  • Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...

    Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...  When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything...  Very buggy. 

    It appears to me that network file access is buggy in Maverick.
    In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
    It makes impossible navigate a directory tree.
    File access has been trashed in Maverick.
    They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • How to create and export a still frame from a movie in iMovie 09

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
    *To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
    *If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
    *If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
    Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
    Note: If you do not have a right mouse button, then control-click will work instead of right-click.
    This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    First, click iMovie/About and see which version you have.
    Versoon 9.0.2 would be iMovie 11.
    Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
    If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

Maybe you are looking for