Linking a tab to another portal page

Hi,
Several users have wondered if it's possible to link to another portal page by clicking on the tab. So for example, when the user clicks the tab name they will be linked to a specified portal page and not have to click a link from under the tab? Is this possible?
Thanks

yes it is, just add an html portlet under the tab with some javscript that redirects to the page you want (document.location.href=http://.....)

Similar Messages

What is the Web Dynpro tab on the portal page?

Newbie here...
I am confused between NDWS and the Web Dynpro tab on the portal page. As I don't have access to either right now, I need to know what is required by a Portal Content Admin to maintain an application. The Basis people do the JCO setup. Those are the only tabs I have seen when using the Web Dynpro tab from the portal, not NDWS. Seeing as I don't have access to either tool, and I have to ask for what I need and I don't know what I need... Been there?
I guess my question is the use of the two tools.
Thanks,
Amy Smith
Haworth, Inc.

Thanks so much for a quick response!
So, the Web Dynpro Content Admin is normally a part of the content admin role. Hmm... I get a "you are not authorized" when I click that tab, even though I can do iViews, etc. and was told I have the content admin role. So if no one edited the rights of the content admin, I should be able to get into Web Dynpro Content Admin tool. Is this so? Is there any special user config, check box, etc in addition to the role?
Is the Dynpro content admin tool useful for content admins or content developers?
My Basis person does not want the content admin to be able to change JCO settings. Is there a way to give the content admin rights to everything in the WDCA except that?
Thanks again. I am a J2EE developer who volunteered to take content admin and content development roles and am trying to figure out what has been done here and what needs to be done. On top of that anyone who has been involved claims "I know nothing..." until I ask specific questions. It's just hard to know what the specific questions are.
I know, training... No money. Sigh... I am good at doing tutorials and reading manuals and experimenting, however, I need access to the right tools and permissions first.
Thanks again.
--Amy Smith Haworth, Inc.

Link in xml form article text to open another portal page?

Like in all websites our intranet have pages with articles (xml forms) where it's logical for the text to include links to other articles in other areas of the portal.
Since all iviews (km navigation in this case) are displayed as iframes, links within the text only lead to the target page being displayed within the iview/iframe. I need the complete portal page to change to also show where in the page hierachy/navigation structure the user has landed.
I am aware of the related links iview, but this doesn't do the trick. I want the article text itself to include the links.
A logical solution would be to find the page's navigation URL and use this as a text link, but then I would need to add a target=_top to change the whole page around. This is not possible within a xml form. (<a href="/irj/portal?NavigationTarget= navurl://cf1c773631c70d216fe3434ca4dc3a0e" target="_top")
Ideas?
Henning

Thanks for answer. Points awarded.
BUT: Still, a link to http://server/irj/portal/link added in the html editor window of an xml form only give the options of opening the link in new browser, or in the active window. The first option results in a massive amount of opened browsers, the second results in the target page being opened in the iframe (not nice!)
Of course I could edit the xml directly adding a target=_top, but every new editing of this file would overwrite these changes.
The best way would be to add a new option in the html editor allowing an option of "fill entire window" when adding a text link that adds target=_top in the xml.
Ideas?
Henning

Need help linking spry tabbed panel from external page

Could use some help. I need to link to a specific spry tabbed panel on page "A" from a link on page "B" I have tried several "solutions" on the web and had no luck. When I add the code needed at the bottom of the code where you initiate the instance, it stacks the content of ALL panels in the first panel, and renders the tabs inoperable. This is a key feature I need in a new site being developed.

I need to link to a specific spry tabbed panel on page "A" from a link on page "B" I have tried several "solutions" on the web and had no luck.
Have you tried http://foundationphp.com/tutorials/spry_url_utils.php ?
When I add the code needed at the bottom of the code where you initiate the instance, it stacks the content of ALL panels in the first panel, and renders the tabs inoperable.
Depending on what the code looks like, it can do all sorts of things.
Please be reminded that the best way for us to help you is by you supplying a link to your site with a one sentence description of the problem.
Gramps

IMac: How to open/save a Safari window of tabs on another screen page?

I would like to open another Safari window on a new page in order to scroll between the two screens on my iMac.
But when I open a new Safari window it opens ontop of the present Safari window ... (not - as hoped for - on a separate screen).
Can I open and save a new window on another screen. Please advise me on this if possible. Thank you.

Hello patongandy,
It sounds like you are opening a new window in Safari, but it is opening on the main display and you would like to move it to your other monitor. You can do this with mission control as outlined in the following article:
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Using Mission Control to organize windows and full-screen apps
App windows are assigned to a single space. You can use Mission Control to see all of the Spaces assigned to each display and to move them. To move a Space, drag it from one display to the other.
Thank you for using Apple Support Communities.
All the best,
Sterling

Report link to Form in another tab.

Basically I have a chart with a link. The link on the chart links to a report and in this report there is another link that links to a form. When you click on the link in the report that leads to the form it brings the form up in a new window. This same form is on another tab of my portal page. I want to know if it's possible for that link to lead to the form under the tab the form is on.
Now after I have said that I hope that isn't too confusing lol...
So let me try to sum it up even further lol... I want to make a link link to another tab on my portal page.

Going to try to clear this up even further.
I have a portal page with three tabs on it. The first tab has a bar chart with technician names that act as a link to a report. The second tab has a form for inserting, updating, and querying open tickets. The third tab just has an advance search feature that displays a report.
When the technician clicks on their name it takes them to a report that only displays their open calls. On this report that comes up there is another link that when clicked on brings up a new window with the form from the second tab on it. What I'm trying to do is make that link from the report use the form from the second tab and not a new window.

Link to other portal page

Hi experts,
I would like to link from a portal page to another portal page. E.g. in Role A there is an iView with a link "xyz". If somebody clicks on he gets to another portal page from Role B (in the same or another window).
Any ideas how to manage this?
Thx for time and effort!
Sandra

Sandra,
check these links you may get some idea
http://help.sap.com/saphelp_nw04/helpdata/en/f0/eca04267deb211e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/314ae7a5-0c01-0010-c198-9c7c5e8cee46
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401
Thanks
Bala Duvvuri

Publishing content from reports server to a portal page

I have a system with Forms/Reports 6i in a client/server implementation. I have 6i reports server from this on the server tier. I have added 9iAS (minimal install) to get Portal and HTTP server. I have completed the configuration and I can have the portal page submit jobs to the reports server and they are displayed properly.
But I also wish to run reports from the application. This app submits jobs to the reports server via RWCLI60. I was hoping I could use 'File' as the destype and drop off content into a directory the web server knows about and then have a portal page that will generate links to the files. These could be pdf or html output.
Can anyone tell me if this is possible and provide a short list of steps to configure it? Thanks.

there is an example of this on dev2dev, see sample code, "redirect" example
(dev2dev.bea.com)
"Lancy Mendonca" <[email protected]> wrote:
>
All
In a webflow how is it possible to redirect to a portal page from a input
processor.
The situation I have is as follows. I have a homepage that has a login
portlet.
The user enters the username and password and after performing the validation
and authentication I need to redirect to another portal page that is
available
only to logged users.
Any help will be creatly appreciated

How can i change the default Portal page

When i access Portal (3.0.9) with my browser it leads me to the well known 'Welcome to Oracle Portal' page (which was installed during Portal configuration). From there i can continue to the login screen, log in and start working.
Now, i would like to change the welcome screen to another Portal Page, one with my company's info on it. Can anyone tell me how to to it?
Thanx
Ben

Just change the default page of the public user.
Regards,
Arnoud Koot
Oracle Web Consultant
http://thedoc.nl

I can't keep the web page zoomed out, after I click a link or go to a differnet page, it goes back to being zoomed in, what can I do to keep it that way?

I went to the toolbar, clicked on View, then Zoom, then Zoom Out. It does Zoom Out, but after I click a link or go to another web page, it Zoom's right back in. How do I keep it Zoomed Out where I want it permanetly?

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

Oracle portal page error.

Hi!
When I click on a tab in Oracle Portal page i got the following error:
- ORA-01403: no data found ORA-20101: ORA-06512: at "DEV_PORTAL.WWPOB_API_PAGE", line 5247 ORA-01403: no data found ORA-01403: no data found.
In WLS_PORTAL.log fileL do not appear any error message but in the WLS_PORTAL.out i get:
- ERROR: Repository Gateway error: Database Error: ORA=20001 ORA-20001: Unable to obtain session information from the cookie.
ORA-06512: at "DEV_PORTAL.WPG_SESSION", line 174
ORA-06512: at line 32
I Have installed the 11g version in a Windows Server 2008.
Anybody knows how can i solve it?
Regards.

Dennis
A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
The Configuration Assistant determines the shared pool size from the view v$parameter,
which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
null

Non-final version download link on OTN SQL Dev home page

The Downloads link (not tab) on the home page leads to the EA 4 version, not the final 3.0!
Home page: http://www.oracle.com/technetwork/developer-tools/sql-developer/
I guess this should to be fixed quickly, now when the XE beta is out ;)
Edited by: orafad on Apr 4, 2011 3:47 PM

Thanks for fixing this and quickly too.

How can I link to a jsp page from another jsp page within websphere portal?

Afternoon all,
I have a websphere portlet which displays a jsp page. I want to put a hyperlink on the jsp page which when clicked will open another jsp page.
Does anyone know how to do this?
Thanks,
Alex

The anchor tag is the correct one for generating clickable links.
<jsp:forward> is for transferring control at the server end. Its when you decide to change which page you want to show the user. ie check user is logged in. If not then forward them to login page, else display current page.
I tried that. It does open the jsp page
but the place and page links in the portal theme get screwed up.Whats mucked up about them? Do they point where they shouldn't?
You might try using a <base> tag to set where relative links are resolved from.
Cheers,
evnafets

Link to specific tab on another page but don't anchor

Hello, I used this tutorial to link to a specific tab on another page:
http://foundationphp.com/tutorials/spry_url_utils.php
It works great, except I don't want to go directly to the tabbed panel. I want the particular tab to be active, but the page should load as it normally does. So the user should always be at the top of the page when it loads.
This is the link code:
<a href="registration.html?tab=1#form">
As you can see, #form identifies the tabbed panel, but it also directs the link where to go. I only want to use it as an identifier, not as a navigator as well.
Thank you.

FShea31 wrote:
Hello, I used this tutorial to link to a specific tab on another page:
http://foundationphp.com/tutorials/spry_url_utils.php
It works great, except I don't want to go directly to the tabbed panel. I want the particular tab to be active, but the page should load as it normally does. So the user should always be at the top of the page when it loads.
This is the link code:
<a href="registration.html?tab=1#form">
As you can see, #form identifies the tabbed panel, but it also directs the link where to go. I only want to use it as an identifier, not as a navigator as well.
Thank you.
Remove the hash part of the URL parameter and just open the tab in the constructor
<a href="registration.html?tab=1">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1",
{defaultTab: params.tab ? params.tab : 0});
I hope this helps.
Ben

How to Link another JSP Page in the same portal component

Hi Guys,
I am a new guy to SAP, currently, I want to add href link to another JSP in the same component, so I used <a href="<%=webpath%>/jsp/AboutPage.jsp">, but obviously, the link can not display target page due to privilege restriction, does anyone know how to resolve this problem? thanks very much!
Best Regards
James

Thanks srinivas,
   Sorry for late response, too busy yesterday.
   Currently, I want to create a URL link in the page which links another JSP page in the same portal component, but the problem is this JSP page is under PORTAL-INF folder, so due to privilege problem, I can not create the link like the following:
<a href="jsp/test.jsp">Link</a>
   I konw if I move test.jsp out of folder PORTAL-INF, the above way should work, but then, I found the JSP page can not access componentRequest and get resource bundle object.
Am I clear, please let me know, thanks!
Regards.
James

Linking a tab to another portal page

Similar Messages

Maybe you are looking for