Linking calendar control from Crystal Reports to Business View Manager

I have a requirement to have 3 prompts on a crystal reports. First prompt will show list of all available regions from database and users will select a region.
2nd prompt will be 2 calendar controls for from data and to date where users can either type the dates or select from calendar.
Based on the value selected in first prompt and from and to date values entered in 2nd prompt I have to populate list of events in 3rd prompt.
Is this possible in crystal. Any help will be highly appreciated. I am doing parallel research and if I find a solution I will post it.
Regards
Ash

Moved to BV forums.

Similar Messages

Multi pass bursting of a Crystal report on business view with a bex query

In BO CMC, we have a group with a list of user.
The idea is to burst (via the multi pass bursting method) a Crystal report for this list of user with the constraint that this report should only contains data of the store linked to the user.
Our data comes from a SAP BI cube.
The link between a Store and a User comes from an other system.
We have build a bex query and use it as a data source of a Crystal Data Foundation.
In this Data Foundation we have an other table storing the user ID and the Store ID.
These 2 tables are linked in this Data Foundation on the Store ID.
Business element and Business View have also been created on top of this Data Foundation.
We have impletemented a filter in this Data Foundation to filter out data on the user id. This user id will be filled when bursting the report for all requested users thanks to this function :.
As a user is linked to one store, the data foundation will filter the data coming from the bex query and show only the data of the user's store.
We have build a crystal report using the business view created above as data source. We have made some test on a small amount of data and it works, data are correctly filter out and the reports shows only the data from one store.
But the problem is that we have a lot of stores (more than 600) and doing this way implies that the bex query will always return the data for all the stores as the filter will occurs in the data foundation and not on the bex query.
We need to find a way to make the bex query returning only the data of the store linked to the user for which we burst the report.
As we have more than 600 stores this was an idea to avoid managing more than 600 under BO groups or more than 600 different filters.
This solution do not work when the bex query result set is too large.
Does anyone has an idea on how to implement such "dynamic" filter in the bex query? The parameter is the user ID but the filter to be applied on the bex query is on the store ID.
We are under BO XI release 2, Crystal XI Release 2 and we have installed the BO release 2 integration kit for SAP

Hi,
what about setting up the data level security in BW ?
Ingo

Parameter Panel Calendar Control Error [Crystal Reports 2008]

I have a report which uses both starting date and ending date parameters. While the report is running, you cannot access the month of February with the calendar prompt. The resulting date is always in March. It looks like a bug...anyone else with this issue.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly.
Also need to know the Operating System and if all patches have been installed. There are also issue with JAva runtime. Be sure to install the latest Java SDK.

Passing Value from Crystal Report (special function) to Business View parameter

Friends,
Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
Eg : CurrentCEUsername (func in crystal report)-- gives login user which i should pass to parameter in a Business view (used in the same report).
Will be able to explain more if required.
Thanks in Advance,
Bharath

I guess you got the picture wrong. User_id is not a report_level parameter .
In Data Foundation, below query is used..
select Acc_Number, Account_Group,User_id from Accounts where user_id={?User_id}
where in {?User_id} is the BV parameter...
The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
How do i pass the CurrentCEUsername to {?User_id}
Value should ve CurrentCEusername always. so that query will be
select Acc_Number, Account_Group,User_id from Accounts where user_id=CurrentCEusername
It will restrict the data pulled from DB to BV .. right?

Migrate from Crystal Report XI R2 to Business Objects XI R2

Hello friends,
As per end of licence life cycle for Crystal report, we need to migrate our 30 crystal reports to BO xi r2.
First thing i need to ask is that ...is this possible to migrate from Crystal report XI R2 to BO xi R2 ?
If yes than where i can find migration guide..i tried import wizard but its not showing crystal reports in list.
please help..
thanks.

Ok. We used the same Administrator user.
It seems first we need to move report to Report Samples than only it shows in list.
If we keep *.rpt under user folders its not being imported.
Import is possible this way only. Now we need to call the report from java.
Which API should we use to print this crystal report migrated to BO?
Regards.
MNBdev

Progress Controle in Crystal Report 10.5

Hi All,
I am moving from crystal report 9.x to 10.5. In crystal report 9.0 some usefull properies such as EnableProgressControle to see your crstal report progress. I am trying hrad to find these properties. I am working on migration project and my client need exact replica of all features.
I searching any way to show some progress bar on crystal report viewer. I have to populate 300000 records.
Thanks In Advance.
Thanks
Ramit Singh

Below is an example of my code for a work around in a vb.net application by using the example given by Shweta Sharma.
This helps users know that the CrystalReportViewer1 control is still busy generating the report.
' Code for frmReportViewer Class (My Windows form that contains the CrystalReportViewer1 control)
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class frmReportViewer
   Private WithEvents rs As New clsReportStatus
   Private Delegate Sub BarUpdate(ByVal val As Integer)
   Private Delegate Sub ChangeCursor(ByVal myCursor As Windows.Forms.Cursor)
   Private Delegate Sub ctrlVisible(ByVal meVisible As Boolean)
   Private Sub Report_ProgressBarValue(ByVal val As Integer) Handles rs.ProgressBarValue
       Try
           If Me.InvokeRequired Then
               Dim bu As New BarUpdate(AddressOf Me.Report_ProgressBarValue)
               Me.Invoke(bu, New Object() )
           Else
               ProgressBar1.Value = val
           End If
       Catch ex As Exception
           MessageBox.Show(ex.Message)
       End Try
   End Sub
   Private Sub Report_ctrlVisible(ByVal meVisible As Boolean) Handles rs.ctrlVisible
       Try
           If Me.InvokeRequired Then
               Dim lv As New ctrlVisible(AddressOf Me.Report_ctrlVisible)
               Me.Invoke(lv, New Object() )
           Else
               lblWait.Visible = meVisible
               ProgressBar1.Visible = meVisible
           End If
       Catch ex As Exception
           MessageBox.Show(ex.Message)
       End Try
   End Sub
   Private Sub Report_mCursor(ByVal myCursor As Windows.Forms.Cursor) Handles rs.mCursor
       Try
           If Me.InvokeRequired Then
               Dim mc As New ChangeCursor(AddressOf Me.Report_mCursor)
               Me.Invoke(mc, New Object() )
           Else
               Cursor = myCursor
           End If
       Catch ex As Exception
           MessageBox.Show(ex.Message)
       End Try
   End Sub
   Private Sub frmReportViewer_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
       Try
           If Not rs.Running Then
               rs.StartThread()
           End If
           Application.DoEvents()
           Dim nPages As Integer
           Dim rep As New ReportDocument
           'To be continued in next post. You do NOT need to include this line in your code

Passing single/multiple values to stored proc parameter from crystal report

I tried below solution posted on this forum to pass either a single value or multi-value to a sql server stored procedure parameter (varchar datatype) from crystal report XI R2.
In my crystal report , I am displaying all the available parameter values to the user and the user will select either a single value or multi value.
This worked when I select single value and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1')}
But this did not worked when I selected multiple values and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1,Product 2')}
I think it might work if it is as below:*
For multiple values:
{CALL "xyz"."dbo"."storedprocedurename";1('Product 1', 'Product 2')}
Please advise.
Solution Posted on this forum is as follows:
Hi,
As you must be aware of that a crystal report created of a stored procedure will allow only a single value for inserting a multiple value as a parameter in your report and pass those values to your stored procedure please follow the below work around which will be helpful for you.
Symptom
In Crystal Reports, you want to pass a multi-value parameter to a stored procedure. The problem with doing so is that Crystal Reports considers the multi-value parameter to be an array.
How can you pass a multi-value parameter to a stored procedure?
Resolution
Here are the steps to pass a multi-value parameter to a stored procedure:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Regards,
Vinay

Hi Vinay,
First you need to make sure the stored procedure accepts multiple values in the fashion 'a','b','c'.
Then, create this formula in the Main Report:
numbervar i;
stringvar s;
for i:= 1 to ubound({?Parameter}) do
s := s + "'" + {?Parameter} + "'" + ",";
left(s,len(s)-1);
Link this formula to the sub-report's parameter.
Hope this helps!
-Abhilash

Export from Crystal Reports 2008 viewer fails if run on separate thread

I have a windows desktop application written in Visual Basic using Visual Studio 2008. I have installed and am trying Crystal Reports 2008 to run a report. Everything seems to work well except that when I preview a report (using the viewer control) and click the export button found in the upper left corner of that control, I get the following message:
Error 5: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it. This exception is only raised if a debugger is attached to the process.
I am a little confused on what to do exactly. Is the problem because I am running in the Visual Studio 2008 IDE? It says this exception is only raise if a debugger is attached to the process. No, I tried running it outside the IDE. The exception wasn't generated but the application hung when the button was clicked.
It says the current thread must be set to single thread apartment (STA) mode. If the report is run on its own thread, is the "current" thread the thread the report is running on or is the main application's UI thread? I don't think I want to set my main application to single thread apartment mode because it is a multi-threaded application (although I really don't know for sure because I am new to multi-threaded programming).
My objective is to allow reports to run asynchronously so that the user can do other things while it is being generated. Here is the code I use to do this:
 ' Previews the report using a new thread (asynchronously)
 Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
 Dim backgroundProcess As System.ComponentModel.BackgroundWorker
 ' Start a new thread to run this report.
 backgroundProcess = New System.ComponentModel.BackgroundWorker
 Using (backgroundProcess)
 ' Wire the function we want to run to the 'do work' event.
 AddHandler backgroundProcess.DoWork, AddressOf PreviewReportAsynch_Start
 ' Kick off the report asynchronously and return control to the calling process
 backgroundProcess.RunWorkerAsync(sourceDatabase)
 End Using
 End Sub
 Private Sub PreviewReportAsynch_Start(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs)
 ' The source database needed to call preview report was passed as the only argument
 Call PreviewReport(CType(e.Argument, clsMainApplicationDatabase))
 End Sub
 ' Previews the report. From the preview window, the user can print it.
 Public Function PreviewReport(ByVal sourceDatabase As clsMainApplicationDatabase) As FunctionEndedResult
 Dim errorBoxTitle As String
 Dim frmPreview As frmReportPreview
 ' Setup error handling
 errorBoxTitle = "Preview " & Name & " Report"
 PreviewReport = FunctionEndedResult.FAILURE
 On Error GoTo PreviewError
 ' Set up the crxReport object
 If InitializeReportProcess(sourceDatabase) <> FunctionEndedResult.SUCCESS Then
 GoTo PreviewExit
 End If
 ' Use the preview form to preview the report
 frmPreview = New frmReportPreview
 frmPreview.Report = crxReport
 frmPreview.ShowDialog()
 ' Save any settings that should persist from one run to the next
 Call SavePersistentSettings()
 ' If we got this far everything is OK.
 PreviewReport = FunctionEndedResult.SUCCESS
PreviewExit:
 ' Do any cleanup work
 Call CleanupReportProcess(sourceDatabase)
 Exit Function
PreviewError:
 ' Report error then exit gracefully
 ErrorBox(errorBoxTitle)
 Resume PreviewExit
 End Function
The variable crxReport is of type ReportDocument and the windows form called 'frmPreview' has only 1 control, the crystal reports viewer.
The print button on the viewer works fine. Just the export button is failing. Any ideas?

Hi Trevor.
Thank you for the reply. The report document is create on the main UI thread of my application. The preview form is created and destroyed on the separate thread. For reasons I won't get into, restructuring the code to move all the initialization stuff inside the preview form is not an option (OK, if you a really curious, I don't always preview a report, sometimes I print and/or export it directly which means the preview form isn't used).
What I learned through some other research is that there are some things (like COM calls and evidently some OLE automation stuff) that cannot be run on a thread that uses the MTA threading model. The export button probably uses some of this technology, thus the message stating that an STA threading model is required. I restructured the code as follows to accomodate this requirement. Here is a sample:
' Previews the report using a new thread (asynchronously)
 Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
 Dim staThread As System.Threading.Thread
 ' Start the preview report function on a new thread
 staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep1)
 staThread.SetApartmentState(System.Threading.ApartmentState.MTA)
 staThread.Start(sourceDatabase)
 End Sub
 Private Sub PreviewReportAsynchStep1(ByVal sourceDatabase As Object)
 Dim staThread As System.Threading.Thread
 ' Initialize report preview. This includes staging any data and configuring the
 ' crystal report document object for use by the crystal report viewer control.
 If InitializeReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase)) = FunctionEndedResult.SUCCESS Then
 ' Show the report to the user. This must be done on an STA thread so we will
 ' start another of that type. See description of PreviewReportAsynchStep2()
 staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep2)
 staThread.SetApartmentState(System.Threading.ApartmentState.STA)
 staThread.Start(mcrxReport)
 ' Wait for step 2 to finish. This blocks the current thread, but this thread
 ' isn't the main UI thread and this thread has no UI anymore (the progress
 ' form was closed) so it won't matter that is it blocked.
 staThread.Join()
 ' Save any settings that should persist from one successful run to the next
 Call SavePersistentSettings()
 End If
 ' Release the crystal report
 Call CleanupReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase))
 End Sub
 ' The preview form must be launched on a thread that use the single-threaded apartment (STA) model.
 ' Threads use the multi-threaded apartment (MTA) model by default. This is necessary to make the
 ' export and print buttons on the preview form work. They do not work when running on a
 ' thread using MTA.
 Public Sub PreviewReportAsynchStep2(ByVal crxInitializedReport As Object)
 Dim frmPreview As frmReportPreview
 ' Use the preview form to preview the report. The preview form contains the crystal reports viewer control.
 frmPreview = New frmReportPreview
 frmPreview.Report = DirectCast(crxInitializedReport, ReportDocument)
 frmPreview.ShowDialog()
 End Sub
Thanks for your help!
Andy

Migrating all configuration from Crystal Reports Server XI R2 to Crystal Server 2013

Hi,
We're running an old Crystal Reports Server XI R2 SP version (boe 11.5) and we're planning to start using Crystal Server 2013
As far as I know no upgrade is possible and that's not needed either.
Instead I'm interested in the migrate possibilities. I saw this thread but it doesn't answer all the questions https://scn.sap.com/thread/3462417
So first I will install Crystal Server 2013 on a new server and then I use some migrate tool.
Questions:
- does the migrate tool support migrating from my version CR server XI R2 SP1 to Crystal Server 2013 ?
- does the migrate tool copy all report schduling information (recurring schedule, destination etc)? We have ~1000 scheduled reports so doing manually is not an option
- does the migrate tool copy Business views/Business view connections ?
(- odbc data sources are probably not copied but that's ok)
-Mikael

Hi Mikael,
Since you're already on CR Server XI R2, you can use the Upgrade Management Tool to migrate all the content to CR Server 2013.
Anwers to your questions:
1) Yes, the Upgrade Management Tool does support this kind of migration
2) It does seem that the UMT allows you to move all report instances as well as the scheduled jobs over to the new server
3) I've always had issues with Business Views when using Import Wizard however I'm not sure whether they work well with the new UMT. In any case, I always prefer to export the LOVs and BVs from within the Business View Manager to a .xml file and then import them in the higher version of the Server, again, from within the Business View Manager.
-Abhilash

No Hyperlink in PDF after export from Crystal Reports 2008 SP2

When I export a report from Crystal Reports 2008 Developer (as well as from the runtime) SP2 to PDF the Hyperlink to a file on hard disk is missing.

Hi,
Go through this LInk
Re: No hyperlinks after exporting to pdf
Regards,
Salah

Get the Picture object location path from crystal report using CRAXDRT.DLL

Post Author: hpatel_it
CA Forum: Crystal Reports
Hi All,I am working on one project - Crystal report to SQL Report conversion and I am using CRAXDRT.DLL to open and read crystal report.I have done conversation of all controls but I am not able to get PICTURE object from Crystal report and also PICTURE object source path.I am using CRAXDRT.OLEOBJECT to get the path of the picture object.if someone have knowledge of CRAXDRT please help me.Regards,Harry

You can get at specific objects using events, but not a whole record.
Can't think of any way of doign this at all...
Ludek

Bapi Function call from Crystal reports 2008. import parameters syntax.

Dear,
I have an issue with calling a function directly from Crystal reports (2008) in the R3 system.
(if this belongs in another thread , please add the link if moved !)
I try to get data through function "BAPI_CLASS_GET_CLASSIFICATIONS".
Till now all possible input parameters have no data-result.
I already read other threads stating that 'for example' the Language key needs to be provided in a single character. 'E' in stead of 'EN'.
I also already created a Z-wrap-function that fills out all input parameters 'hardcoded'. This works.
clearly there are som syntax changes in passing the values to R3 when called from Crystal Reports.
Can someone state which syntax has to be followed for numeric fields, for datefields etc. (so when i make these dynamical, I know which syntax should be the outcome of the formula)
in my function that doesn't work I use these selections:
(this function is called in a standard report only calling this function)
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_ISO} = "E" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_INT} = "E" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSNUM} = "DSWTEST" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSTYPE} = "001" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_KEY_DATE} = Date (2011, 08, 05)
I already tried other languages or the 'EN' as input.
(I would like to know how the date is passed exaclty to R3.)
The function is of course RFC enabled.
when I call the my Z-function with predefined inputparameters in R3 it does give the wanted result.
FUNCTION ZBAPI_CLASS_GET_CLASSIFICATION.
""Local Interface:
*" TABLES
*"      OBJECT_CLASSIFICATION STRUCTURE BAPI_OBJECT_VALUES
*"      CLASS_OBJECTS STRUCTURE BAPI_CLASS_OBJECTS
data ZOBJECT_CLASSIFICATION type TABLE OF BAPI_OBJECT_VALUES.
data ZCLASS_OBJECTS type TABLE OF BAPI_CLASS_OBJECTS WITH HEADER LINE.
ZCLASS_OBJECTS-OBJECT_KEY = '000000000000000085'.
ZCLASS_OBJECTS-OBJECT_TYPE = 'MARA'.
Append ZCLASS_OBJECTS.
CALL FUNCTION 'BAPI_CLASS_GET_CLASSIFICATIONS'
EXPORTING
    CLASSTYPE                    = '001'
    CLASSNUM                     = 'DSWTEST'
*   KEY_DATE                     = SY-DATUM
*   LANGU_ISO                    =
*   LANGU_INT                    =
*   CHARACTS_OF_CLASS_ONLY       =
* IMPORTING
*   RETURN                       =
TABLES
    OBJECT_CLASSIFICATION        = ZOBJECT_CLASSIFICATION
    CLASS_OBJECTS                = ZCLASS_OBJECTS
OBJECT_CLASSIFICATION[] = ZOBJECT_CLASSIFICATION[].
ENDFUNCTION.
please advise.
once again if this should be moved to another forum , add the link please!

Dear,
I just debugged my Z-function, after adding all input parameters as in the standard BAPI function.
All parameters seems to be passed correctly except from the table parameters from
CLASS_OBJECTS
So all I_parameters are passed :
{ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_INT} = "EN" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_ISO} = "EN" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_KEY_DATE} = Date (2011, 08, 05) and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSNUM} = "DSWTEST" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSTYPE} = "001" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CHARACTS_OF_CLASS_ONLY.BAPIFLAG} = ""
but the table parameters aren't coming through:
{ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
{ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
these are 'blanco' in the function.
also after the function is executed and all data is retrieved, when passing the data back to Crystal reports, once again, the table result isn't passed to Crystal Reports.
please advise

Migrate from Crystal Report Server XI R2 to new Eclipse RAS SDK Question

Hi,
I am migrating Crystal Report Server XI R2 RAS SDK to Eclipse RAS SDK which seems to be quite easy.
I have the following old code which basicly programmaticly creates a Report from scratch adds a Table and then
populates the Report with a Pojo Collection.
 
Now before I would have : 
 
Table oTable = new Table(); 
oTable.setName("reportTable"); 
pbConnAttributes.putStringValue("QE_DatabaseType", "Java Beans Connectivity"); 
pbConnAttributes.putStringValue(PropertyBagHelper.CONNINFO_DATABASE_DLL, "crdb_javabeans.dll"); 
PropertyBag pbLogonProperties = new PropertyBag(); 
pbLogonProperties.putStringValue("Java Bean Classes", className); 
pbLogonProperties.putStringValue("SSOKEY", ""); 
pbConnAttributes.put("QE_LogonProperties", pbLogonProperties); 
pbConnAttributes.putBooleanValue(PropertyBagHelper.CONNINFO_SSO_ENABLED, false); 
oTable.getConnectionInfo().setKind(ConnectionInfoKind.CRQE); 
oTable.getConnectionInfo().setUserName(""); 
oTable.getConnectionInfo().setPassword(null); 
oTable.getConnectionInfo().setAttributes(pbConnAttributes); 
//following statement throws Exception 
doc.getDatabaseController().addTable(oTable, null); 
 
getDatabaseController().setDataSource(pojoCollection, pojoClass.class,"reportTable", "reportTable");
 
 
Now wenn using the c lient eclipse RAS SDK which pbConnAttributes should I use? 
No matter which ones I choose I get a Bad Driver Exception or Named Exception. 
Can anybody help?
Edited by: snake-john99 on Aug 11, 2010 10:35 AM
Edited by: snake-john99 on Aug 11, 2010 10:39 AM

Hi Mikael,
Since you're already on CR Server XI R2, you can use the Upgrade Management Tool to migrate all the content to CR Server 2013.
Anwers to your questions:
1) Yes, the Upgrade Management Tool does support this kind of migration
2) It does seem that the UMT allows you to move all report instances as well as the scheduled jobs over to the new server
3) I've always had issues with Business Views when using Import Wizard however I'm not sure whether they work well with the new UMT. In any case, I always prefer to export the LOVs and BVs from within the Business View Manager to a .xml file and then import them in the higher version of the Server, again, from within the Business View Manager.
-Abhilash

Printing font Barcode3of9 from Crystal Reports XI

I have an issue with printing font Barcode3of9 from Crystal Reports XI utilizing Manhattan Associates Performance Management (PM) UI application.
The font is applied to a field that is converted from a number to a text using the CStr formula in Crystal Reports XI in order to display the value as a barcode.
The barcode on the report is converted successfully in the PM UI 100% of the time. However the business tries to print the report using the print or the export the report functions and the barcode is not converted 100% of the time into a barcode only the value of the field displays.
The font is installed on the server that the business accesses and I have installed the font on the web server for our testing environment, but it still does not aide with fixing the issue.
Does anybody have any experience with this issue?
Thank you

Please contact Manhatten Assoc. for supporting their software.

"Catastrophic Failure" trying to export from Crystal Reports Explorer v10.5

In using Crystal Reports Explorer v10.5 (add on to Crystal Enterprise v10) I am trying to export just over 211k records to MS Word.
The data is coming from a Business View (created in Business View Manager) that uses an OLEDB connection to an Oracle database.
I get the following error message:
CrystalReportVIewer
Error caught in ICrystalReportGridViewerImpl::render
webReporting.dll '0x80004005'
Catastrophic failure
line: 16031
I have no idea what's causing this or how to resolve it. Can anyone assist? Thank you!!
Edited by: AmberDoreen on Mar 21, 2009 2:03 AM

No - it doesn't work with any of the viewers and the same error occurs. I think we've determined that it's due to the amount of data and the % of resource allocation in order to export the results. The query behind the data is pretty complex, and the Oracle views that are being accessed are also pretty beefy. It's just a huge hit on resources. I've advised my client to provide more filters & reduce the amount of returned rows to see if that clears things up. I'm waiting to hear if they are successful. Thanks for responding, though! I'll update once I hear from the client.

Linking calendar control from Crystal Reports to Business View Manager

Similar Messages

Maybe you are looking for