Linking dll and testing

HI,
I need to link labview to a third party software and test the VI.
I have the dll file, header file, a sample testfile and also the
source file of the dll in c language.
I know that I need to use the callnode function.
I have created a VI but I am not sure how to test the program
I can include all the files as an attachment here.
Can anyone go through the VI and then help me hot to test the VI using
the testfile that I have.
Any suggestions are welcome.
Thanks,
Ajit
Attachments:
New_Folder.zip ‏36 KB

Hello Ajit,
You might want to look through the Using External Code in LabVIEW manual, which gives a good explanation and examples of how to use the Call Library Function Node.
I am still a little confused as to what you are trying to test. Are you trying to test your dll, run your testfile through LabVIEW, or both? If you could provide some more details as to what you want to examine, I would be more than happy to help you further.
Good Luck!
Jeremy L
National Instruments
Jeremy L.
National Instruments

Similar Messages

Remote and testing server don't see root relative links the same

My site works fine on my testing server (Apache, MYSQL,
PHP). I use root relative links in a library
file (include file) so that it will work with all pages. For the testing server these links look like this:
/my_sites_root_folder/aaa/bbb/ccc etc.
If I use these same links on the remote server they won't work. To get hem to work I have to change all these links to the form
/aaa/bbb/ccc etc.
When dreamweaver uploads files to the remote server, the site name folder (my_sites_root_folder) doesn't go along for the ride--just the files in it. So on the remote all the site files are stored in htdocs. On my testing server, the files are stored in htdocs/my_site_root_folder.
I think it must have something to do with the way I'm setting up the remote and testing servers, but I'm read a hundred pages of instructions without being able to figure it out. I think I'm just seeing something wrong, but I've already spent days on this. Can someone please point me in the right direction?
I'm using DWCS5. Internet explorer 8, Windows 7.

Thank you for your prompt response. I'm afraid I'm still totally puzzled here. It sounds like you're very knowledeable about your comments, but I would like to know more. I accept that using the local site root in links would be bad, but I'm not clear WHY. Structuring the links as I have doesn't cause any links to break. I've structured them this way because it's the only way I can find that everything works. But I still do not understand WHY I have to do it. Using different libary include files doesn't seem like a good way to go, though
You suggest that if I use any root relative links at all, I need to use vitual hosts. I'm not finding any good coverage of what these are, and especially why they are necessary. If this is the case, does that imply that templates (which use root relative links) also will not work on the test server (at least without vitual hosts)? The conclusion I'm coming up with, given your remarks, is "Dreamweaver doesn't work with root relevant links when you're trying to test a site with a test server." Is this right?

ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but pr

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

How do I stop Win7 from breaking my software? Ole32.dll and "Power" service suspected culprits.

Hello and thanks for any help with this.
I built a new computer for my aunt and her one major request is that she still be able to use her card maker software Creatacard (yes misspelled just like that) by American Greetings. I thought this would be no issue, I could give her a much faster machine
and get her off (the no longer supported) WindowsXP all at the same time by moving her to Windows7 and copying all her files over from the old PC to the new one.
I tested the software first on a test PC of mine and found it would not install in a 64bit environment (error message saying use 32bit during install) which I solved by using Windows7 32bit. It worked perfectly so I proceeded to build her machine thinking
that issue resolved. Problem is after the new rig was built and SP1 plus all windows updates were installed the Creatacard software would not load. I get an instant popup message saying "Creatacard Application File has stopped working" with the options
to "Check online for a solution..." and "Close the Program."
Checking online does nothing noticeable and close program doesn't help as every time you reload it fails immediately with the same message. Clicking on the "view problem details" drop menu reveals that this is an APPCRASH with the following clues
Fault Module Name ole32.dll
Fault Module Version 6.1.7601.17514
I have researched and tried everything I could find online about this crash and none of it (up to and including completely re-installing Windows, systematically loading a few Win-updates and trying the app after each batch, editing the registry multiple
times, trying alt versions of ole32.dll, and using a Linux live CD to alter windows settings) has fixed the problem. I have learned the following though:
When windows is first installed the card maker software (CMS from here on) works fine.
After windows updates itself and a few device drivers auto load (like when you first plug in a USB mouse or Flash drive) CMS breaks.
Loading windows normally after it is up to date always causes CMS to crash and give the above message.
When I perform a "clean boot" CMS works fine once again.
When I boot into safe mode CMS works fine.
Someone online suggested a service could be the actual problem and there being 140 of them I used the 50% method to quickly narrow the list and found that yes indeed windows services do appear to be related because if I don't allow the "Power"
service to run the CMS works perfectly. With a bit of testing to see what it does I found that it controlled wake/sleep settings, delay until your monitor goes dark etc and that if the Power service is disabled it remembers the last settings entered and I
thought GREAT! Finally after many days of frustration and being balked by nonsense I have a solution. My aunt will never use/miss the power settings I will set them up for her once and then kill that service and all is well for a Happy Holiday... (from my
research online some may already guess where this is headed) until I went to play a video............ and there was no sound.
A little red X had appeared next to the speaker icon down in the system tray next to the clock and hovering over it gave a popup with "The Audio Service is not running." This is where the BS gets deep. I had of course NOT disabled the sound (Windows
Audio) service and a quick check showed it and all the services it depended on were in fact on and running. The Windows trouble shooter offered to fix the issue and so I let it run but it comes back with "one or more Audio service is not running"
and attempting to restart the service on its own came back with a "Not fixed" result. Now if I go to check dependencies for the "Power" it claims that no other services depend on it and it depends on nothing but that is an outright lie.
Further digging shows me the Power service's "path to executable" as... C:\Windows\system32\svchost.exe -k DcomLauncher and many other services show they depend on DcomLauncher to run.
Long extra trouble shooting session short here is where I am at. I can have the sound working or the CMS but not both.
Uninstalling and re-installing the sound card drivers didn't help (since sound is being stopped at the windows OS level) either.
As soon as I turn on the Power service and reboot the CMS breaks. As soon as I disable the Power service and reboot the CMS works perfectly but all audio breaks. Both of these are a deal breaker as she will not leave her old slow XP machine without her CMS
and I cannot give her a new machine that has no sound. Reboots take 30 seconds on this new PC so were it mine I could just live with it as the CMS has no sound and I don't need music playing when I am designing a Christmas card. Use the sound/power on 99%
of the time and disable them and reboot whenever I make a card and then enable and reboot when I am done. This would be over her head though I fear as she is a senior and not very tech savvy. My question then is...
Is there any way to have the CMS work while still keeping the Windows Audio service (and all the other not listed but still existing dependent services) running? Or alternatively is there something else I can do to the ole32.dll to make it stop the crash/error?
To be clear I would happily accept a system without the Power service running if (like it actually says under dependencies) nothing else other than the "Power Options" in Control Panel ceased to function.

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

How do I use a dll and C++ code to create a labview driver

I have a dll and some .net code to read temperature from a USB HID device I purchased from the website below. In addition some other people have posted their methods/codes of reading the temperatures. I am trying to convert this into a Labview VI but I am very lost.
http://www.no-feature.com/2008/01/taking-advantage-of-your-temper-device.html
It seems I can use the call function to see the functions in the DLL but I cannot use them to actually do anything. I have used serial communcation in labview before but never USB so I feel like I am in a little over my head and would really appreaciate some guidance.

This is not quite easy But to find out how try to reverse engineer this code http://pc8-termo.fis.ucm.es/~josechu/mitemper.zip
Before starting on the job I would recommend doing some testing to see if the code work with your device. I can help if you promise to post the tested code here in this forum. It doable in Labview. It just requires some bit manipulation. Also the unit drive must be installed
To establish a communication link with the device, the settings can be extracted from function SetupCommPort in MITEMPer.c, which are:
9600bps, 8 bits, no parity bit and one stop bit with DTR and RTS enabled.
To initialize the device, the function is init in functions.c. The sequence is:
Calling the Start_IIC function, which in turn calls the SetDataLine and SetClockLine passing 1 as parameters for both, and then calling those two functions again with 0 as parameters.
SetDataLine function sets the RTS line if the passed parameter is 1 or clears the RTS if the passed parameter is 0.
Similarly, the SetClockLine function sets the DTR line if the passed parameter is 1 or clears the DTR line if the passed parameter is 0.
In other words to to initializes the device, we first have to set the RTS, set the DTR, then clear RTS and clear DTR.
So to some part that involves a technique that is often referred to as bit banging. There are 3 groups of 8 bits (one byte) that need to be transferred. Which are, first group 10011110, second group 00000001, third group 01100000.
Then stop the IIC (look in the respective function on what have to be done here).
Start the IIC again.
Transfer another 3 groups of 8 bits.
Stop the IIC.
The sequence of transferring the group can be obtained from the function Transmit in functions.c:
The transmission is done through the DTR and RTS line only. Not through the usual TX data line.
If the data is 1 set the RTS or if the data is 0 clear the RTS.
Then the tick (clock), set the DTR followed by clearing the DTR.
Loop to the next data bit for 8 times.
After 8 bits, set the RTS line and set the DTR line.
Then read the CTS line for acknowledgement (inverted).
Closed by clearing the DTR.
You can follow the C code and find the necessary sequences and data that you need to talk to the device and obtained a reading.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

NI-MAX/NVIORef.dll and RTE 8.2.x nightmare. pls someone sends me a RTE 8.2.1 dll?

hi there
i just installed LV 7.1 PDS 2005Q3 (default installation), and after that LV 8.5 PDS 2007Q4 (default installation). all works fine except the NI-MAX panels (e.g. devices test panels etc.). see attached ni-max (sorry for the german version..). this is annoying because i cannot add any devices etc.!
LVBroker needs the RTE 8.2.1 , well OK, i downloaded the RTE 8.2.1 and ran the installer. the installer says "8.2.1 already installed", and so does MAX (see rte attachment). so the installer does nothing at all. the only content of the \Shared\LabVIEW Run-Time\8.2 - directory is the NVIORef.dll with version 8.2.0.131. i assume this is the 8.20 dll version, and not the 8.2.1.
i'd like to replace this single dll with a "real" 8.2.1 dll. can someone please send me this dll?. or does someone have a better idea?
the NVIORef.dll can be found in the directory \Shared\LabVIEW Run-Time\8.2, you can find out the version number in explorer with right click on the dll and then click the "version" tab page.
thanks in advance
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
ni-max.JPG ‏18 KB
rte.JPG ‏72 KB

Chris,
I just checked my LabVIEW 8.2.1 installation, and the version of the NVIORef.dll in the Runtime directory is still 8.2.0.131.
BUT: this is not the only content of the Runtime directory, as you can see in the screenshot attached to this post.
What OS are you using? If it is Microsoft Windows 2000, be sure to have at least SP3 installed before running the LabVIEW-RTE Setup.
Regarding the broken Test Panels in MAX - do you have any drivers installed (VISA, DAQmx, ...)? If so, did you reinstall them after running the LabVIEW 8.5 setup?
From my personal experience, I dare recommend you a clean new installation of both LabVIEW versions and the 8.2.1 runtime engine, best performed in the version order (7.1, then the 8.2.1 RTE, than 8.5.
There is a forum entry with a download link to MSI blast and a very good PDF which points you to the Windows Registry keys that you need to delete after deinstallation, which you can find here:
http://forums.ni.com/ni/board/message?board.id=250&message.id=34373&requireLogin=False
I think it's worth giving a try.
Attachments:
version check1.gif ‏59 KB

Problem with linking dll.

Hi,
I am trying to link a third party dll in labview. I have the dll, the
header file and the c file but I am unable to define the input
parameters of the fuctions correctly.
I am attaching the files, can any one please check and correct the
problems that I have and check if I have defined the input parameters
correctly.
Thanks,
Ajit
Attachments:
New_Folder.zip ‏35 KB

Hi Becky,
Thanks a lot for your response.
I am a student at the university of Delaware.
This is what I am trying to do,
I have a third party software. I am trying to work with it in LabVIEW 7.0 version.
I have the dll, the header file, the C file and all the data.
I am using the call function node but I am finding a difficulty to figure out how to call the dll, then test the dll by running a very simple test.
The dll has a few functions and they are clearly explained in the header file which I am including in the attachment.
I also have the c code of the test file I am trying to run with this dll.I am including it also in the attachment.
Can you help me by building a VI that can link to the dll and run the simple test file that I have he
re.
Thanks a lot,
Ajit R Nalla.
Attachments:
New_Folder.zip ‏31 KB

Captivate 6 Errors: Missing file libwinpthread-1.dll and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

Hi,
I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
Thanks in advance & kind regards.

Wow, No replies so far !!
Any one ??

How do you use a SOA Composite after you have deployed it and tested it?

I have created a SOA Composite application, deployed it with no problems, and tested and it works. However I am having trouble finding info on what to do next. I really would like to know how to use this SOA Composite application in a web application. I am trying to create an interface that would use the SOA composite. Any links to help would be greatly appreciated.
This is the only help I have found so far, http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e15524/uc_bpel_bc.htm

Hi,
It's a web service call, you go to EM get the WSDL and with it you generate the webservice client for your web application... By calling the web service you will be starting the composite...
Cheers,
Vlad

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

Development and Test on same machine

Hi,
In my current setup I have a development application, a test application and a production application.
The dev. and test is on the same machine, with different APP ID's. Dev is 102, and test is 110
At first there was no problems with this. But now all of a sudden it starts to create problems for me. In APEX you can create a coloumn link on an item in a report. In the column link you can set link text, attributes, the page the link links to and you can set items that should be send to the new page.
The problem that occurs with the link is that APEX uses the APPS name instead of the APP_ID, so that my link will be the same from the development app and the test app. F.x.:
http://test.test.dk/pls/apex/f?p=APP
instead of
http://test.test.dk/pls/apex/f?p=110
I think that APEX stores some cookie information on the machine that accesses the sites, and the problem hasnt occured untill these cookies ran out.
I see 2 solutions to this problem:
1. Install a new server with the development app
2. Rename the development APP to something different.
The problem with no 2. is that I will then have to (re) rename the app everytime I release the app to the test server.
Let me hear some suggestions. How do other people do this?
Edited by: bjarkekr on 2009-12-22 13:09

I would recommend separating DEV and TEST into different database instances - they can still be on the same physical server and even share the web server (if you are using Apache/modplsql). All that's needed is a second DAD pointing to the second DB (e.g. your URLs would then look like http://test.test.dk/pls/apexdev/f?p=APP and http://test.test.dk/pls/apextest/f?p=APP if you define a DAD named apexdev to point to the DEV database and a second one named apextest to point to the TEST database).
If you really have to stick with one DB, then I believe all you need to do is changing the application alias, not the application name itself, for your DEV application (and yes, you would need to change this setting once you migrate from DEV to TEST, but that shouldn't be really that big deal, it's just changing that one setting on the app definition page...). By default the alias is the same as the app name.
Holger

How can i re-link .mpkg and .pkg files to hidden Installer?

I am near the end of the process of setting up my new Mac Pro (early 2009) eight core. Quite the wonderful difference from my "Mirror Drive Door" dual 1.25 GHz machine!
The Mac Pro came with Mac OS X 10.6.2 installed. I updated this to 10.6.6 via Software Update along with a slew of other updates presented there. I downloaded and installed a bunch of software. Finally, I was ready to install iLife 11 from the "CPU Drop-in" DVD that was on top of the box when the computer was originally unpacked.
Unfortunately, it wouldn't even begin the install. The "iLife.mpkg" file, when double-clicked, returned the error message "no application associated with this document". Hours of investigation reveals that NO .mpkg or .pkg file will open; doing a "get info" on the files reveals that those files have lost their link to the Installer app.
AND since the only installer I can find is hidden in /usr/sbin, there is no way I can re-link .mpkg and .pkg files to it via "get info".
I downloaded Pacifist and used it to open the "Mac OS X 10.6.6 Combo" package and re-installed the Combo updater. Much to my surprise, that didn't fix the linking issue.
I've logged in as root, but still can't re-link the package files to the Installer as /usr/ is still hidden. Is there a way I can temporarily "un-hide" the /usr directory so that "get info; open with" can see it?
I've started from the Mac OS X installer DVD and repaired permissions on the hard disk and "repaired" the hard disk. No luck there either.
I did a clean install of Mac OS X 10.6.2 to a different hard drive and applied the combo updater and the packages worked as expected there. So some software I installed or by running a slew of updaters via Software Update broke the link between packages and the Installer.
I'm sure that re-linking to packages to the hidden installer app can be done via Terminal and possible other ways, but I don't know how to do it.
Short of doing a complete Mac OS X 10.6 re-installation and update and having to re-do several days of other software installations and data transfers, I'm hoping someone will offer some solutions or tips on how to solve my problem.
How do I re-link .mpkg and .pkg files to the Installer?

Thanks for the reply. I know I had previously checked for the missing installer in /System/Library/CoreServices/ and I rechecked and it's still not there. But your tip spurred me to check the test 10.6.6 installation on the other hard disk and yes! It's there!
A quick copy from the second hard disk to my current hard disk and doing the "get info" trick and everything now works wonderfully. Only one day lost to trying to figure this out. Now that the problem is fixed, quite the relief.

SP 2013 Development - How can I Simulate Different Devices to Help Design and Test a New UI?

Hello Community!
I am working with SharePoint 2013 and I need to be able to design and test a new design across multiple device browsers. Does anyone know how to simulate a device browser for design and testing? BTW, I know about Device Channels, and they give
me a way to dynamically change my UI for different device browsers, but because this UI is complex, I cannot be sure what dynamic changes need to occur until I can simulate the device browsers and view my new UI in them.
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
Because your question is mainly how to simulate different devices, which is more related to SharePoint development, I am moving this thread to
SharePoint 2013 - Development and Programming forum for better response.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

Linking dll and testing

Similar Messages

Maybe you are looking for