Linking errors during install on Linux Mandrake
When I installed oracle (8.1.7) on linux mandrake I got a series of errors during
the very last portion of the install involving a bunch of *.mk files.
The first error says:
Error invoking target relink of makefile
$ORACLE_HOME/precomp/lib/ins_precomp.mk
All the others are virtually identical. I'm still pretty new to linux so I avoided
recompiling the kernel. Aside from that I followed the install instructions to the
letter. If anyone knows whats going on I would very much appreciate a push in
the right direction.
Alright, I've tried using the most recent archboot (2011.02-2) a couple times. I selected GRUB2 x86_64 EFI. It asked me whether or not I wanted to convert my existing MBR to GPT. When I say no, it says installation was successful, when I say yes, it drops me into parted, so I just quit. My GPT should be fine as is.
My issue is that now, in rEFIt, I only get OS X and Legacy OS options. Legacy just freezes my computer. The legacy option has been there since I last tried to install, though I've tried to get rid of it a few different ways.
Should I choose a different bootloader option? Can I use the cd to boot in and fix it manually? if possible, I'd like to keep using rEFIt.
Similar Messages
-
Link error during install of O9i Application server
Hi there.
I have a problem when installing Oracle 9i Application Server rel. 1.0.2.2.0 on SuSE 7.3.
During installation phase "Linking Oracle 9i Application Server rel. 1.0.2.2.0", I get: "Error invoking target install of makefile /
opt/oracle/product/9.0.1/icache/lib/ins_icache.mk"
The make.log states:
building Oracle8i Cache Management Engine
gcc -o /opt/oracle/product/9.0.1/bin/wtcme -L/opt/oracle/product/9.0.1/icache/lib/ -L/opt/oracle/product/9.0.1/lib/ /opt/oracle/pro
duct/9.0.1/icache/lib/wtemain.o /opt/oracle/product/9.0.1/icache/lib/libicache.a /opt/oracle/product/9.0.1/lib/libwtc8.a /opt/oracle
/product/9.0.1/icache/lib/libxml8.a \
-lclntsh /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8
-lnl8 -lnro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneri
c8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -ln
ro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrac
e8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `ca
t /opt/oracle/product/9.0.1/lib/sysliblist` -ldl -lm \
-lpthread -lc
gcc: /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o: No such file or directory
make: *** [opt/oracle/product/9.0.1/bin/wtcme] Error 1
I had a similar problem when installing the database server software. This was fixed by editing the LD_SELF_CONTAINED parameter in
genclntsh. This, however, does not help in this case.
Kind regards,
Roald AndresenHi Melchor,
Please follow SAP Note 1618816 - Permanent or Temporary License Already Exists In Systemcopy
If possible please share files saplikey.log, dev_slic
Regards,
Gaurav -
Error During INSTALL of Application Export File
An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard. -
Re: Link error during fcompile
Hi Jeanne:
I have already gone trough the procedure you have described but the
result is same.
When I invoke link command on all the *.obj files with some libraries
from forte and
MSVC/Lib I get the same Error. The command I am invoking is
C:\> link *.obj *.lib
Assuming that I am in the dir where all .obj files are and I have copied
all required .lib files in this dir. Other thing that I have also tried
this with different link flags and/or with exact flags from Forte log
file.
Thanks for your respons.
Any othe suggestions please?
--Shahzad
Jeanne Hesler wrote:
Shahzad,
Have you tried manually invoking the link command itself from the
command
line? I was able to do this successfully when having problems with
the
Borland compiler under 16-bit windows. It is not a long-term
solution,
because you obviously want fcompile to handle the entire task, but it
might
help you determine if it is a problem with the fcompile or the linker
itself.
I executed the fcompile from a DOS window in the ...codegen\myapp
directory. When the error occurred, I found the log file that is
created
from the fcompile, and determined the last command that was executed.
I
can't tell you the exact specifics here, because I have not had
problems
with fcompile using the MSVC compiler. But I am assuming that Forte
is
consistent about writing the compiler output to a log file. I could
then
copy the command line from the log file to the command line in the dos
window and execute it manually.
You have to be careful copying the command line, because there are a
lot of
flags, and they ARE case-sensitive. If you get the same error when
invoking the command manually, then you can assume that the problem is
with
the compiler itself, or as it was in my case, with the compiler
setup. If
the command is successful when you execute it manually, then you can
pursue
it as a problem with the fcompile.
One other thought -- you might make sure that you have plenty of extra
disk
space. Compilers like to write temporary files during the compile
process.
On a very large compile, you might need a lot of working space for
these
temporary files. I believe the MSVC compiler writes these files to
the
directory indicated by the environment variable TMP (not TEMP).
Hope this helps,
At 11:22 AM 10/17/97 -0400, you wrote:
Hi,
I am getting this error during fcompile of a large (12MB) pgffile
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation saysthat
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even seeall
memory being utilized during compile.
Any clues?
--Shahzad
--Jeanne
============================================================
Jeanne Hesler [email protected]
============================================================The way to handle this is to break down the fcompile. Here is the
process:
1. fcompile -nocompile -fm "(x:40000)"
this will produce the CPP and H files
2. fcompile -nogen -fm "(x:40000)"
this will link the files and produce the exe.
If there is an error then you will know exactly where its happening.
Hope this helps.
Kamran Amin
Technical Leader, Software Engineering
Oxford Health Plan
http://www.oxhp.com/
From: Chaudary M. Shahzad[SMTP:[email protected]]
Sent: Friday, October 17, 1997 7:05 PM
To: [email protected]
Subject: Re: Link error during fcompile
Bruce:
I have tried that I have even tried
fcompile -fm '(x:400000)'
It seems like its the Microsoft Compiler and/or Linker problem. There
have to be some flags for compiler or linker I can
set with fcomile so it allocate more memory for the MSVC linker.
Any more clues or help ????
--Shahzad
Bruce Lipson wrote:
Chaudary,
There are flags for setting the usage of memory by the fcompile
command.
fcompile -fm '(x:250000)'
where x:250000 sets the maximum amount of memory fcompile will use to
250k.
the default is 64k.
Get it a try.
Bruce Lipson
[email protected]
-----Original Message-----
From: Chaudary Shahzad [SMTP:[email protected]]
Sent: Friday, October 17, 1997 11:22 AM
To: [email protected]
Subject: Link error during fcompile
Hi,
I am getting this error during fcompile of a large (12MB) pgf
file
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation says
that
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even see
all
memory being utilized during compile.
Any clues?
--Shahzad -
Solution for Power Saver error during install
Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye -
Quicktime errors during install, uninstall, or run
Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.
I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
Errors During Instalation Of Final Cut Studio 5.1
Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view. -
FCP error during install.
I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan -
I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
DonAs you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
OMS error during install Grid control 10gR2 on Windows 2003
He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanksThere are some guidelines here:
Subject: OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
Doc ID: Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
Doc ID: Note:358640.1
~ Madrid. -
Integrity constraint error during install
We have installed htmldb on zlinux from the companion CD.
Because we had an error during install of the flows schema we repeat it (have removed the Flows-User and Flow-Files before) using ins.sql! The apache was still running.
Most of the new installation was fine but near the end we got:
error creating "Procedure arguments" id=122 Ora-01400, cannot insert NULL into ("FLOWS_010500,"WWv_Flows_STEPS","SECURITY_GROUP_ID")
declare
Error at line1
Ora-02291- integrity constraint(FLOWS_0150000.WWV_FLOW_PLUG_ZO_PAGE_FK) violated
parent key not found
ORA-06512 at "FLOWS_01500.WWV_FLOW_API line 4695
...OK, it's solved:
I finally managed to install Apex 3.0 correctly once I figured out my error.
I was logging in remotely to the server the dadbase was on, then trying to connect to sqlplus using 'sys/password@instance as sysdba' to run the script.
Turns out that the problem had something to do with sys not being allowed to be sysdba when I log in remotely, or that having the username/password and instance info in there made the program think I was logging in remotely and therefore not giving me sysdba privileges.
The root of the problem was running the install .sql without the correct privileges.
Since I found out the database server I was trying to install on uses OS authentication, I remote-connected to the database server as the oracle user, tried to run the install .sql again after connecting to sqlplus: 'conn / as sysdba'
and everything worked like a charm!
~PF :) -
[SOLVED] DHCP error during install due to multiple net cards
Hello all,
At the "Setup Network" option during the installation, I choose eth0. Then it asks if I want to use DHCP. I select 'Yes' but get
Failed to run dhcpcd. See /dev/tty7 for details
while polling for DHCP. So I press Alt+F7 and the details are
eth0: dhcpcd 4.0.10 starting
eth0: waiting for carrier
eth0: timed out
When I try to manually set it up (ie select 'No' when asked if I want to use DHCP), it asks for the following: IP address, submask, broadcast, Gateway (optional), DNS Server. Then it says "Network is configured" but I still can't download the packages.
I have a Realtek RTL8139 Family PCI Fast Ethernet NIC card (not wireless) to a Linksys Router. I've set up DHCP on it for 5 users (only two being used). By the way I have WinXP on the same computer which accesses the network fine, and net access also worked during other distros' installation.
Any clues? Thanks.
Last edited by AMA (2009-05-11 13:17:53)ralvez wrote:OK. You have an IP address, so that rules out a problem with your Nic card.
Sorry I was maybe a little bit unclear on my previous post, but I'm pretty sure that I don't have an IP address during installation. I would like to add some precisions. Here are my observations:
When I type ifconfig immediately after login (as root), it shows
lo Link encap:Local loopback
inet addr:127.0.0.1 Mask 255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Then when I run /arch/setup, Configure Network, answer 'Yes' to DHCP, and after the error message (the one on 1st post), ifconfig gives this (which clearly shows that I do NOT have an IP)
eth0 Link encap:Ethernet HWaddr 00:00:39:63:8C:EE
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local loopback
inet addr:127.0.0.1 Mask 255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Finally, when I answer 'No' to the DHCP question, and after I've entered my IP/Broadcast/Subnet Mask/DNS addresses, the result of ifconfig is the one on the previous post, that is
eth0 Link encap:Ethernet HWaddr 00:00:39:63:8C:EE
inet addr:172.30.201.6 Bcast:172.30.201.255 Mask 255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local loopback
inet addr:127.0.0.1 Mask 255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
NB: I have entered the same addresses that I use normally (ie with Windows, the ones I see in cmd->ipconfig /all), but I could have entered whatever addresses I wanted. And I still don't have net access during install (ping does not return anything).
Can you explain what are you doing to install Linux? Do you try to run the CD from within Windows or are you placing the CD in the CD bay and re-booting the machine and the CD fails?
Of course I am booting the cd at startup (not within windows)! And the CD does not fail, or at least does not seem. Everything runs fine except the DHCP thing. So the problem is not the CD, but my computer. I'm finding a way to get DHCP working during the installation. -
"WRITE SAME failed. Manually zeroing." error during install or boot
Hello everyone!
Since the lasts kernels (I'm almost sure it happens since 3.9 because 3.8 worked fine) I can't boot on Archlinux anymore. This error floods my screen and I can't do anything, and because the new Archlinux iso (june 2013) comes with 3.9 kernel it now also happens during installation. Fortunately, I saved the may iso so I still can install archlinux and switch during install to LTS kernel but this is not a good solution. I can't find a solution online, some people have this issue but it seems to be a bit different everytime.
I use Archlinux on a server, with hardware raid : Dell PERC H200a with LSI SAS2008 according to my BIOS. According to http://kernelnewbies.org/Linux_3.7, the WRITE SAME SCSI command "allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O (commit)". Here is the exact configuration :
- DELL® PowerEdge R210 II
- 1x Intel® Xeon® E3 1220 V2
- HDD: 2 x 1 To SATA2 RAID
- RAID: Hardware, Dell PERC H200, (Raid 1)
So my first problem is that I can't find online if my server is capable of this command (but I don't think so) and then the other issue is that I want to know if I can disable it. I found kernel patches for this issue :
https://patchwork.kernel.org/patch/1898441/ and https://patchwork.kernel.org/patch/1982051/ (the first link seems to be a better solution).
Then, I checked in the kernel source of 3.9 and I think that this patch isn't implemented (there is no device_write_same_capable function for instance). But kernel patching is not a really good solution, if I have to patch my kernel everytime the main kernel is updated...
After some research, I found that my hardware RAID driver seems (I'm not sure) to be the kernel module "mpt2sas", so I checked both may and june isos of Archlinux and it's the same version (14.1) so it shouldn't be the problem.
Does somebody can help me on this issue ? I don't really know what to do now.
Thanks for reading, if I forgot something or if you want more informations, ask me!
Bye.
PS : My English isn't very good, sorry.
EDIT : I found a part of the solution ! It seems to be an issue with the kernel that doesn't detect properly if my disc is capable of doing WRITE SAME command.
So I have to write "0" in the file "max_write_same_blocks" under /sys. But the problem is that /sys is renewed every boot so I don't know how to make my changes permanent. I made a systemd service file, it almost works, but this solution isn't nice : the parameter is applied lately so errors shows at the beginning and this is not really easy to set up. I prefer a solution like "sysctl" but it seems that it only controls parameter under /proc/sys and not /sys, am I right ?
Moreover, I tried two other things : Ubuntu 12.04 with kernel 3.9.4 works and Archlinux iso with 3.8.10 has max_write_same_blocks > 0 and it also works... So I don't really understand this issue. Maybe in 3.8 the parameter max_write_same_blocks has no effect (or not the same as in 3.9) ?
Here is the systemd file that I made to reduce the issue :
[Unit]
Description=No WRITE SAME
After=local-fs.target
[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo 0 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks'
RemainAfterExit=no
[Install]
WantedBy=multi-user.target
This is not a good solution, see my next post. I don't delete it in case you want to compare.
Last edited by rfnx (2013-06-02 15:26:50)I found a solution to disable the WRITE SAME command. That doesn't answer all my questions but it solves my issue. I was looking for a file like "sysctl.conf" but for /sys parameters : you already can do that in Arch, just create a file that ends with ".conf" in tmpfiles.d and add one line per parameter you want to modify. This file will be loaded early at boot.
To disable it in an existing Archlinux installation, add in you file the line :
w /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks - - - - 0
Read the manpage of tmpfiles.d if you don't understand this line, it depends on your configuration and you can't copy it.
Then reboot and no more error !
If you want to disable it during the Arch install, just change directly the value you want in /sys. You have to do it at the beginning before mounting partitions, for instance just after choosing your keymap.
Bye.
Last edited by rfnx (2013-06-02 15:34:11) -
Link error with installing 11.2.0.3 x64 on Ubuntu 11.10 x64
Hi,
I'm upgrading from 11.2.0.2 to 11.2.0.3 on an Ubuntu 11.10 x64 platform. During the link process of the installation, I kept on encountering a link error which looked
like the following. This error firstly appeared in 'all_no_orcl'. If I clicked continue, this error would pop up when linking for other binaries. They all pointed to libocrb11.so. I could successfully installed 11.2.0.3 on another SUSE platform, but I'm wondering how I can make it work on Ubuntu. Not sure what packages I missed.
Thanks in advance.
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoOpenFile'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCreateCtxExt'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoIO'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoFnameMax'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCommit2P'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCheckHdl'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoRenameFile'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoDeleteFile'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCloseFile'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoErrorMessage'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoGetSize'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCreateFile'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoOpenDirty'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCheckMount'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoDestroyCtx'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoControl'
/hd15k/u01/app/oracle/product/11.2.0.3/dbhome_1/lib//libocrb11.so: undefined reference to `kgfoCreate2P'the problem because of gcc version in 11.10 ubuntu is 4.6, oracle relink need gcc 4.4
if you upgrade from previous version of ubuntu, checked in /usr/bin
ls -ltr gcc*
-rwxr-xr-x 1 root root 349120 2011-09-16 07:31 gcc-4.6
-rwxr-xr-x 1 root root 275952 2011-09-17 03:10 gcc-4.5
-rwxr-xr-x 1 root root 259232 2011-10-05 14:56 gcc-4.4
lrwxrwxrwx 1 root root 7 2011-11-12 07:13 gcc -> gcc-4.6
rm gcc
# ln -s gcc-4.4 gcc
# ls -ltr gcc*
-rwxr-xr-x 1 root root 349120 2011-09-16 07:31 gcc-4.6
-rwxr-xr-x 1 root root 275952 2011-09-17 03:10 gcc-4.5
-rwxr-xr-x 1 root root 259232 2011-10-05 14:56 gcc-4.4
lrwxrwxrwx 1 root root 7 2012-02-01 11:25 gcc -> gcc-4.4
you should be able to relink oracle. -
Error during installing Premiere Elements 10
Hello,
Installing failes all thetime with following message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed
Has somebody any idea what's wrong here?
ThanksCheck this link :- http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html
Maybe you are looking for
-
Alert about the loading time & Restrict the number of the rows retrieved
Hi everybody, maybe the question is stupid, but I didn't find yet an answer... I'm using BIP 10.1.3.4.1 Because I have many reports with a huge amount of data to display (in HTML format) and customers once clicked on "View" have to wait a lot of time
-
Why all newly installed Apps appear on the second page of Launchpad?
I'm new to Mac (1y now). Using 10.7.5 on my MacBook Air. Every time I install an App it appears in the second page of Launchpad and since I don't want to have a second page, I move it back into one of my App groups on the first page, erase the empty
-
Album Art in Zen Vision M / How did you do
This question is for those of you who have actually gotten the Album Art to show up in the Zen Vision M. I have been trying to figure it out for 3 days straight and I need some serious. My firmware version is .0.0 is this the right firmware? I have m
-
Image cannot be displayed (as htmltext) when published for Air, android and iphone
Hi, I am using Adobe Flash CS5.5 (AS3) and am building an online rss reader which loads a rss(xml) feed as htmlText containing title, description (with html formatting, linkage and image). My rss format is roughly based on the online sample found at
-
HELP please Wi-Fi (Wireless LAN) Disabled by device manager
I have HP 2000-2d02EIA Notebook PC, but my wireless not working it shows this message "Wi-Fi (Wireless LAN) Disabled by device manager" via hp connectin manager when its on, please help me.