Linking one Web-I to other.

Hi All
I am trying to link one web-i report with other.
Both the reports are in My Favorites folder.
Following is the formula I am using for linking.
="<a Title='SOC Sched vs Actual Report Detail'
href=\"../../../OpenDocument/opendoc/openDocument.jsp?sWindow=New&sType=wid&sPath=[MyFavorites]&sDocName=Detail&lsMEnter Action Day="[Action Day]"\">"[Count of Distinct Users]+"</a>"
But I am not getting the result.The same I tried before , it worked well(but in that case reports are not in my favorites).
Now My doubt is whether the reports in My Favorites folder can be accessed using the link or not. If yes , is there any problem in the above formula.
Please help me out.
Thanks
Vishnu

Hi,
If you are using BO XIR 3.1, you dont have to create the hyperlink manually, BO does it for you. Check out my 2nd response in this post.
http://www.forumtopics.com/busobj/viewtopic.php?t=176586
Let me know if that helps.

Similar Messages

How to show data from one web site to other web site having diffrent domain.

Dear all,
i want to show the selected data from one web site to other web site.
the location of the two web site is geographically seprated (and diffrent domain)
Please tel me in how many ways it can be accomplished.
If it can be done using jquery then please tel me the function or procedure to do it.
Note: ( i have seen the above behavior in many web sites .
like, i was purchasing some thing but finally declined,
after that i visited some other web sites to gets some other data on other area
, and i show my selected items of the first web site on second website as advertisement.)
i would like to know how these things are accomplished and how it can be done in asp.net.
yours sincerely

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Document/hyper link among webi reports

Hi Gurus,
I am trying to link webi documents,
I hav 2 options
1.)hyperlink and
In hyper link I am using this link but i am not able open the target document..
https://bodev.pg.com/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=ATjA2dUY7u1Hldh9n6imWmM&lsSR=[Run Date]
2.) document link
I am not able to see the document link tab in report elements (as in attachments). I would like to know how to view that option
regards
mahi

Hello Victor,
I am able to apply doc linking on horizontal/vertical tab successfully but I want to apply doc linking on crosstab..
And the linking should be row wise linking.. I have 7 rows in my main rep where when i click on each row it should get navigated to respective detailed report.
Please advice me..
thanks
mahi
Document/hyper link among webi reports

How do I link multiple Spry Accordions so that when one is opened the other ones close?

I have created a web site using six Spy Accordions as the menu. I know this is not what they are usually used for but the animation as they open was just right for the site. I've gotten them working just as perfectly as I could want, with one exception. Because there are six independent accordions they all open and close independently. What I want is a way to link them so that when you open up one it closes the others so only one is open at a time. I've looked and looked for anyone anywhere talking about this and I've found nothing. I'm not even sure if it's possible. I know that Spry is being fazed out and jQuary is basically replacing it. I have considered heading in that direction but I've put so much time into this and it works so perfectly except that one thing. Here's the website for referance: http://journeywilderness.com/
Please... if anyone has any ideas about how to make only one Accordion open at a time please please help me. I'm frustrated beyond words at this.
Thank you.

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

More than one web link in a Business Event

Hi SAP experts,
Having created a web link in a business event I was very pleased with myself. Now I find that I would like to add up to two more (different) web links for the same Business Event. There does not seem to be an obvious option to do this. I have tried the route of Create->Create Attachment and Create->Create External Document. These actions subsequently apear in the Attachments List but are not visible to users in the Employee Self Service.
The SAP manual hints that more than one web link should be possible (it refers to 'web links' several times). However in the manual I have, there is no guidance on how to make multiple web links in a Business Event.
Is it possible? What's happening with the 'Attachments' that have been created? Should all the desired documents to be viewed be bundled into one document and then given the one, allowable web link? Is this the thickest question asked on this forum?
Many thanks for any guidance you may be able to offer.
Tony
oic3120

Hello,
"Having created a web link in a business event I was very pleased with myself."
Could you summarise how you did that so it's clear what you mean by this?
regards
Rick Bakker
hanabi technology

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

One Webi Report with multiple Cascade Prompts

HI
I have a requirement to create Cascading prompts on WebI reports. I have two questions.
1) Can one Webi report have two or more sets of Cascading prompts.
2) The universe is used by several groups of business useres. But only one group needs to have a Cascade prompts. Therefore, if i create Cascading prompts on Universe what is the impact to other business users who dont want the prompts as cascading prompts.
Please provide me this information.
Thanks in advance.

Hi
Thanks for the repoly. Can you please provide me more information.
I understand that I need to do following steps.
1. copy existing universe as universe II.
2. link Universe II to Universe 1.
3. Create cascade prompts on Universe II.
4. Provide access to Business group with the requirement of cascade prompts to Universe II and rest of the groups to Universe I.
Please let me know if my understanding is right.

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

How to Open another WEBI from one WEBI by clicking a data point on the first tab?

Hello Guys,
I have a requirement in which user wants to open another tab by clicking a data point on one tab.
So, lets say we have a table in one Webi and its has following fields:-
Customer : Sales DOC: Month : Year : Qty : Amt
User wants, that if they click on Customer, it should open another webi which should show them a chart reflecting the data about that customer only.
How can I do that?
Regards
Prashant

Hi,
Check Below links about Hyperlink details
http://scn.sap.com/docs/DOC-21161
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0daee1d-0e38-2d10-0c91-8bb4ab5aa266?quicklink=index&overridelayout=true
Regards,
Anish

How to create a link to web page (URL) to a billing document

Hi,
I have an urgent requirement of creating a link to web page (URL) to a billing document.
I call the function module "GOS_EXECUTE_SERVICE" with :
ip_service = 'URL_CREA'
is_object-objkey = no billing document
is_object-objtype = 'VBRK'
is_object-logsys = 'BO'
ip_rwmode = 'E'
Then, I enter the title and the address.
And, I have the message : "The attachment was successfully created".
But when there's nothing in the attachment list of the billing document.
(Tha table SOOD contains the record )
If any one has some idea about his , how to achieve this functionality, can you please help me.
Thanks
Virginie
geoge bush
Posts: 6
Questions: 0
Points: 6
Registered: 7/9/04
Re: Attaching a file to a purchase Order from EP6 to R/3 4.6C
Posted: Jul 13, 2004 2:46 AM Reply E-mail this post
Hi Somaraju,
I am also looking for A CODE EXAMPLE TO ATTACH A DOCUMENT TO A AN sap OBJECT E.G. BUS222 AND ISUACCOUNT.
IF YOU'VE AN Example code that you can email me . it would be great.
thanks for the help.
geoge.

Hey,
If you are using Portal (not Framework), the below tag will do the trick
<wcdc:userProfile id="profileUserLink" immediate="false" text="#{security.userDisplayName}" shortDesc="#{security.userDisplayName}" xmlns:wcdc="http://xmlns.oracle.com/webcenter/spaces/taglib"/>
-K

Detail Navigation missing when i link a web page in the WPC Scenario

Hi to all.
I had publish WPC site with the External Connector method.
I have some Web Pages linked in the Navigation Structure, when i link one of this from a internal link (for example in a List link or other) I displayed the page and the detail navigation is visible and the focus on the destination page is light.
Well, when I try to link a Web Page that not is linked in the Navigation structure (open it in the same page) the Navigation structure is missing.
Why? How i can leave the NAvigation structure and display the page?
Many thanks for your help in advance.

Hi,
this scenario is not supported by WPC. I think it was written somewhere (in a note or so). The problem is that if a page is not included in the navigation structure there is no navigation node associated. And so link to that page does not contain NavigationTarget therefore it does not trigger a real portal navigation but just displays the page in the iframe in which it has been fired. That means if you are using the standard framework page (i.e. with frames) page is shown in the inner most frame and the rest is untouched (side effect from which is that the TLN is not updated) and if you are using the light framework page after click the page is shown on the whole window as there are no iframes.
May be you would be able to work around this by selecting such page to be opened in pop up window. Other options exist but they are more complicated as solutions.
Hope that helps.
regards,
--epexpert

Trouble with making a link to Web photo Album in Dreamweaver cs4

I am pretty new to this. I have created my website, made all my links, which are working fine, but when I made a Web Photo Album in Adobe Bridge, saved in Dreamweaver under my other web pages on my site.
Here comes the problem, I made a link from i.e. (parents.html) to go into my Web Photo Album but it won't work when I preview it in browser, but other pages will work when I test it with the same link on my (parents.html) page.
I am pulling my hair out, I can't understand why the link to Web Photo Album won't work, it is the last thing I have to do before I have to upload website. Can someone please, please, please tell me what is wrong.
Cheers

You may need to upload the pages anyway, so that people can help you find the problem. Seeing the code and the associated files is the only way to try and help you ;-)
You can always upload the files to a test folder on the server instead of directly into the root of the site if that is going to be an issue for you,
PS: If it's working from being linked to from other pages, then there must a pathing issue when it comes to that one page.

Linking between Web Servers

All,
Looking for more of a high-level answer than a detailed technical one. Is there a way to link a user logged into one web server to a completely independent web server, where the first web server has the credentials for the second web server, and those credentials should not be passed to the user's computer in any format?
Put another way, User is logged into Web Server 1. Web Server 1 has credentials (username/password) for the User on Web Server 2. Those credentials should not be passed to the User; however they are required to link the User into Web Server 2.
One solution is to have Web Server 1 make an API call to Web Server 2 with the credentials; have Web Server 2 issue temporary credentially that expire; and then pass these credentials to from Web Server 1 to the User.
I'm curious if there is another solution where Web Server 1 logs directly into Web Server 2, and then "proxies" Web Server 2's session back to the User. If so, is this easy to implement on Web Server 1? What is this called?
Thanks,
Kevin

Hi,
Quoted from
https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
Publish.
Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
http://www.xylos.com/default.aspx?id=1050
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Poor Performance of Sun One Web Server 6.0 SP6

We are running on an E450 with 2GB of memory, Solaris 8 2/02 with Recommended and Security Patch Cluster from 31 Jul 03, Sun One Web Server 6.0 SP6, Macromedia ColdFusion 5, JDK 1.4.1_02. We are seeing intermittent (three or four times a day) performance problems, extremely poor response time.
A vanilla, �test� iPlanet web server was put up on port 2443 with https turned on and off. Repeated control tests on file operations (�copy link as�) showed similar results as those described in High Impact above. Changes to add KeepAlive parameters (in magnus.conf) showed no noticeable improvement.
Tests were conducted -- on the test server -- accessing the same file from two clients, one a thin client (TC), the other a Unix workstation (UW).
Results:
1) Sometimes process TC was started first and continued normally while process UW hung up; when this happened, only one httpd process was building cpu time;
2) Sometimes process UW was started first and continued normally while process TC hung up; when this happened, only one httpd process was building cpu time;
3) Sometimes both process TC and process UW continued normally regardless of which was started first; when this happened, two different httpd processes were building cpu time together;
Speculation on Process Management - speculation is that, in the case of the 3rd bullet above, iPlanet assigned different httpd processes to the two requests. In the case of the first two bullets, however, the belief is that iPlanet actually assigned the second request to the same process it had previously assigned the first request. In this case, the second request was left to wait. It appears that most of the work done by httpd children is performed by only two or three children, even when there are 10 available.
Questions;
Why are the other httpd children are not more fully utilized?
What about changing the number of Acceptor Threads?
Could turning on Native Polling help (UseNativePoll in magnus.conf)?
Any other thoughts about what is going on or how to fix the issue?
Thanks for any assistance
Excerpt from /etc/system
* Web Server and ColdFusion Setting
set shmsys: shminfo_shmmax = 2147483647
set shmsys: shminfo_shmmin = 1
set shmsys: shminfo_shmmni = 100
set shmsys: shminfo_shmseg = 50
set semsys: seminfo_semmns = 1750
set semsys: seminfo_semmni = 70
set msgsys:msginfo_msgmax = 65535
set msgsys:msginfo_msgmnb = 65535
set msgsys:msginfo_msgseg = 8192
set msgsys:msginfo_msgssz = 16
* Default is 512, which handles several thousand connections
*set tcp:tcp_conn_hash_size=262144
* Do not set to 0 in solaris 8 on Production Systems
*set sq_max_size=0
set rlim_fd_max=8192
set rlim_fd_cur=8192
* END of Web / ColdFusion Settings
Excerpt from /etc/rc2.d/S69inet
## Web Server and ColdFusion Settings
# Comment out tcp_slow_start_initial, because default is 4
#ndd -set /dev/tcp tcp_slow_start_initial 2
ndd -set /dev/tcp tcp_xmit_hiwat 32768
ndd -set /dev/tcp tcp_recv_hiwat 32768
ndd -set /dev/tcp tcp_conn_req_max_q 1024
ndd -set /dev/tcp tcp_conn_req_max_q0 4096
ndd -set /dev/tcp tcp_time_wait_interval 60000
ndd -set /dev/tcp tcp_keepalive_interval 900000
# Comment out next 4 to accept default
# - change only if tcp longer than 10 seconds expected
#ndd -set /dev/tcp tcp_ip_abort_interval 60000
#ndd -set /dev/tcp tcp_rexmit_interval_max 10000
#ndd -set /dev/tcp tcp_rexmit_interval_initial 3000
#ndd -set /dev/tcp tcp_rexmit_interval_min 3000
# Left out changing ephemeral (short lived) port
#ndd -set /dev/tcp tcp_smallest_anon_port 1024
# Keep default of 1480576
#ndd -set /dev/tcp tcp_cwnd_max 65535
## End of Web / ColdFusion Settings
Excerpt from magnus.conf
RqThrottle 1
MaxProcs 10
StackSize 131072
## Added for lightly loaded systems
KeepAliveQueryMeanTime 1
KeepAliveQueryMaxSleepTime 0

Because the security context is set as a process context, the NSAPI thread locks the process prior to setting the security context. The older NASPI plugin that we are using is not reentrant, it will not work with the mulitthreading model. Under multithreading each thread would have access to the security context of each thread.

How to read URL parameters of one wdp component into other WDP component?

Dear Experts,
Can anyone let me know how to read URL parameters of one wdp component into other WDP component?
My requirement is i have one standard WDP component with 3 URL parameters and i needto
read that URL parameters along with their values in my Z-WDP component.
Thanks
SK

Hi Santosh,
You can read parameters send from one WebDynpro Component to another component by adding code in "HANDLEDEFAULT" Event Handler method ( Window )of your target Web Dynpro Component.
data: lt_parameter             type tihttpnvp,
         ls_parameter             type ihttpnvp.
lo_api_controller ?= wd_this->wd_get_api( ).
   call method lo_api_controller->get_message_manager
     receiving
       message_manager = lo_message_manager.
   clear : ls_parameter.
   refresh : lt_parameter[].
* Read all URL parameters
   wdevent->get_data( exporting name = if_wd_application=>all_url_parameters importing value = lt_parameter ).
if not lt_parameter[] is initial.
     clear : ls_parameter.
     read table lt_parameter into ls_parameter index 1.
     if ls_parameter-name = 'ACTION' and
        ls_parameter-value is initial.
       lv_flag = 'X'.
       clear : lo_msg.
       lo_msg = 'Action Parameter Missing in URL Link !'.
*         report message
       call method lo_message_manager->report_error_message
         exporting
           message_text = lo_msg.
     else.
     endif.
Best Regards
Priyesh Shah

Linking one Web-I to other.

Similar Messages

Maybe you are looking for