LinkSys CIT400 no longer working

Since the last two weeks at least, our LinkSys CIT400 Skype phone no longer works. We can make a call (SkypeOut) but when the other side answers, we hear no sound nor hear anything being said from the other side of the line.
Is there a reason for this break?
Francisco

Thank Provider 7. The next day I noticed that my router and the new dsl modem were using the same address. Off I changed the address of the router and everything worked just fine. For those of you who had the same problem go to the Linksys website and search the FAQ at http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2243
Although I could have done it by myself there were step by stpe instructions - always nice to make sure you cover all the bases. So everything is working fine. I hope this post helps someone else !

Similar Messages

Linksys CIT400 mic stopped working

Just yesterday with these new updates in Skype (I presume that's what caused it), the mic on my Linksys CIT400 phone stopped working. It was working flawlessly up until then, then it just wasn't working anymore.
To make it more weird, it's not just skype, it doesn't work on landline connection either. Now I did think its a hardware issue, but honestly, mics don't just stop working like a flick of a switch. Especially as you can hear clicks when you tap on the phone. Googled the problem, and it seems it corresponds to phone being basically stuck in mute mode. But I try to make a call, and turn mute on and off, and it still isnt passing sound along. My only conlusion is that with the latest Skype update - the voice isn't carried through for whatever reason.
BTW, I did try to reset the device and update software, but none of that helped (says I have the latest version of the software). So please if you have any ideas or solutions to this, let me know.
Solved!
Go to Solution.

First, I wish to thank you for your reply and the suggested answers. Sadly, I've tried them and none worked. I was really hoping that updated sound drivers will resolve the problem, but no luck. This is just the tip of the iceberg of some 100 changes, updates, resets I've done in past 10 days trying to resolve this problem.
Frankly, I'm very tired and disappointed with Skype at the moment. When you have 2 completely separate devices like I do and they both exhibit the same behavior at the same time, like mine do, there's only 1 thing to pinpoint it to and that is the 1 thing they share in common, which is Skype. I've been a loyal customer of Skype for probably a decade now. Having active subscriptions, buying Skype products, Skype out credits etc. I tip the hat to their support which spent over 2 hours with me on Sunday trying to troubleshoot my problems, even gave them Remote access to my PC so they can try to instal and change any setting they want, but no luck...
It's obvious the problem is deeper and that Skype changed the way it processes or picks up sound, and that's what is causing the issue on multiple devices like mine. I have no problem with that, or progress in general, but if you do that, then WARN the customers, say "hey, your device might stop working". And last but not least, leave them an option to use a previous, FUNCTIONING version of Skype, not the new and obviously buggy one.
I am very, very disappointed in this behavior, it's no wonder people are switching to other apps and for the first time in last 10 years, if I don't manage to solve this problem out, I will be looking into them as well.
Once again, thank you for your reply and if you or anyone has another suggestion, while Skype tech team is working on analyzing logs in my calls, I am more than willing to try them out. But after 2 weeks of being unable to use the product I'm actively paying for, my patience is nearing the end.
Still, I'll try to stay positive and keep my fingers crossed that a temporary solution comes up
Grateful in advance,
Milan

Linksys router no longer works with Westell 6100 modem

Hi all,
I came back after a 3 month work absence (and many days power outages, according to the neighbors), to find that my system can no longer connect to the internet using the Verizon Westell 6100 modem to a Linksys wrt54G router to 2 PCs!
I reset the Westell modem and directly connected the PC to it and THAT works okay, but put the router back in the mix (so I can connect my other PC) and nothing works!
I have read on this forum about 'Bridgeing" the Westell modem but nothing about setting up the router.
Can someone PLEASE give me explicit instructions on how to:
    1.) set up the Westell modem in this "Bridge" mode,
    2.) Set up the Linksys router to work with the modem again??
    3.) Tell me why the old setup no longer works, did verizon change something for this modem?
Thank you VERY much for your help in this matter!
SUE ;>)

the router has two connections. one is called a WAN and that is a wide area network, and it means the internet in your case. and one is called a LAN, local area network.
what you saw means - that the way you connect to your internet is through PPPoE, a username and a password.
and then way your LAN connects is DHCP, how all of your local computers connect. This is important, because after you bridge the westell, you will be setting your Linksys up for PPPoE connection, and NOT DHCP. if you don't do this step, then you will never connect.
that is fine, and normal. if you follow the instructions at the link provided - you will be able to connect real easily.
you will want to bridge the westell just follow the instructions for "If your Westell uses the red and black Verizon firmware:"

Linksys E1200 No Longer Working After Verizon Modem Replacement

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

JHStup wrote:
I want to add that I:
1) Have not yet tried returning my router to factory settings. (Is this step necessary? Is this usual, that the router needs to be returned to factory settings if the modem it was formerly connect to changes?)
2) I did do all of the power-down/reboot modem instructions per the router's software instructions.
Hello, yes reset and reconfigure. Just download the latest version of Cisco connect 1.4. That will set up the router for you and will update the router if needed. You can download it here http://homesupport.cisco.com/en-us/support/routers/E1200.

Linksys router no longer working

I have had NO problem swith my linksys router unti I installed the model Westell 6100F. After having to perform a hard reset on the dsl modem to get it to work. I tried to reconnect my router to my network and it will not connect. I can connect to the net directly through the dsl modem but NOT through the router. My router worked for years until Installed this new dsl modem. I am using dhcp with all factory defaults for the router. - has anyone had this problem ?
My router is a Linksys BEFSR41.
Message Edited by fleeteedo on 02-19-2009 05:47 PM
Solved!
Go to Solution.

Thank Provider 7. The next day I noticed that my router and the new dsl modem were using the same address. Off I changed the address of the router and everything worked just fine. For those of you who had the same problem go to the Linksys website and search the FAQ at http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2243
Although I could have done it by myself there were step by stpe instructions - always nice to make sure you cover all the bases. So everything is working fine. I hope this post helps someone else !

Which range extender works with the Linksys CIT400 phone?

Which range extender works with the Linksys CIT400 VoIP phone? Can I use any range extender from any other comany or does it have to be one from Linksys? I am not sure if the CIT400 uses standard frequences.
On a side note, where's the forum for the phones? I see one in the archives section which seems to be ready only.

You can use the Linksys WRE54G range expander. For that matter, any 2.4Ghz range expander will work. But what’s more important is what router you would be using the range expander with!! Which router are you using?

Airprint no longer working – router settings wrong?

Airprint no longer working – router settings wrong? Network TP-Link TD-W8951ND router. version 5.1, Firmware build 120522. As far as I know the settings are factory defaults with two exceptions. My ISP input various settings to reflect my proper internet connect configuration. I have assigned one static port “100” to a printer not currently on the network. Auto DHCP now starts at “101”. Epson Artisan 837 printer. New, Bonjour service name EPSON3FC9CA (Artisan 837), auto IP address (currently 192.168.1.103), firmware WB15D3 38.38 linked wirelessly not by Ethernet. iPhone 4S Software 6.1.3 (10B329). iPad 3 Software version 6.1.3 (10B329) Windows Vista 32-bit laptop, linked wirelessly, auto IP address Windows 7 64-bit desktop, linked via Ethernet, auto IP address MagicJack Plus, linked via Ethernet, auto IP address Installing Epson On June 6, 2013, using my laptop, installed it wirelessly on my network. Updated firmware etc. All worked well. Same for the desktop. Again all functioning as planned. The installed printer name was Artisan 837 (Network) When I tried to use the Airprint function on my iPhone it could not find any Airprint printers. I downloaded and ran the Bonjour print services wizard. This created a printer named EPSON3FC9CA (Artisan 837). I could now print wirelessly as planned. Problem solved I thought. As of June 6, 2013 all software and firmware is current. On June 12 attempted to link my iPad to Airprint for the first time. It could not find an Airprint printer. I tried my iPhone and it could no longer find an Airprint printer. I tried numerous powerdowns, reboots, reinstalls etc. to no avail. I can point Safari wirelessly to the printer IP address on both iPhone and iPad and see the printer’s “web page” to check ink level, settings etc. I downloaded Epson iPrint to both iPhone and iPad and that software works as planned allowing wireless printing. I tested the Epson on my older Linksys router and my iPad found it as an Airprint printer! Worked wirelessly as planned. Conclusions The only thing that is not working as planned is Airprint functionality on my TP-Link network. I am thinking there is a setting on the TP-Link router that needs to be adjusted to keep the Bonjour established software path open and persistent. From the time I first established the Airprint connection to the next time I tried to establish a connection was some 6 days. Although the iPad and iPhone renew their network lease every 90 days, the other equipment lease runs for 3 days before renewal. I don’t know if the IP address of the Epson changed on renewal. (Even if it did, I would hope the discover functionality should follow to the new address.) Over that 6 day period there were no software or firmware changes. As far as I know the only environmental change would be related to IP addresses or something else at the router level severing the connection. Before trying a static IP setting for the Epson (and I don’t know if that will work) are there any other router settings to check that will clear up this situation? I am sending this to TP-Link, Epson, Apple, and my ISP in hopes that a solution can be found.

Thank you for your reply. What I didn't mention was that I have spent days googling to find an solution. I have tried most alternatives suggested to no avail. My problem is quite technical and most probably has a very specific and simple solution related to my router (set ABC to 123XY). All alternatives ended, "if this doesn't work contact the supplier". So I have - Apple (here), Epson, TP-Link and my ISP. When (if?) I find a solution I'll post it here for others to learn from.

PhotoSmart D110a Wi-Fi no longer working after move

I have a PhotoSmart D110a that I connect to via Wi-Fi (WPA security). I've had the printer for several months. When I originally got it, it set up and it connected like a dream, and worked without a hitch since day 1.
This past weekend I moved into a new house, and once I had my network up and running again, the printer no longer works. I am using the same wireless router (Linksys E-series), with the same SSID and WPA password, and the same computers in the same configuration as previously worked in the old house. Needless to say, the computers can connect to the Internet through the wireless router just fine, and they are sitting right next to the printer (so there should be no signal strength issue).
What happens is this. The printer claims that it is properly connected to my network, but neither computer on the network can find the printer. I have used the printer's wireless networking setup utility to re-join the network (it seems to find the correct network, no problem), and re-enter the password through the printer's keyboard utility, as well as using the WPS method (i.e. "pushing the buttons") to re-connect the printer to the network. Every time, the printer says that it has connected just fine, and is able to print out a network status page. The IP address listed is in the 194.168.x.x range.
But every time, neither my computer nor my wife's laptop (both 64-bit Windows 7 machines) can detect the printer on the network. I have tried adding a new printer via the native Windows program, as well as uninstalling and reinstalling HP's software, to no avail. I have also tried inputting the IP address the printer claims into the computers manually, but the computers still cannot find the printer.
I would be grateful for any and all assistance. It's quite frustrating - for all the printer's concerned, it's working just fine, but it's not, and literally nothing has changed except the physical location of the equipment (same ISP, same cable modem, same wireless router, same computers, same printer). Thanks in advance.
This question was solved.
View Solution.

OK, well, are you sure that the printer and the computers are on the same network? Probably are, but stranger things have happened.
Have you restarted the router and verified that its firmware is updated?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Internet radio no longer works on E1000 network

My E1000 no longer works with my Livio Internet Radio although it worked perfectly for many months and my Mac Book continues to work perfectly accessing the Internet. The third time I called Cisco tech support they told me the E1000 was discontinued and no longer supported (and I should just buy a new one!), but that there was a firmware update (although I only bought it earlier this year)! I tried to download the update and got a warning "This software can destroy your computer. Do you still want to download?" 3 different customer service people assured me they were sending the program driver update to me, but nothing has ever been received! I have gotten conflicting online advice on what channel I should use. It is currently on Chan. 11, which the Livio Radio people say I should change to 10 or 5 but I cannot find any screen under "Wireless" that allows changing the channel! My screens look entirely different than on the Cisco help pages. Cisco advice says to use 6 or 11 so I'm at a loss here. When I move the Livio radio closer to the E1000 it works, but it worked in the next room without problems before, for many months. When I reviewed the Livio at my publication it worked perfectly with no such problems: http://www.audaud.com/article.php?ArticleID=6711
Cisco's tech support even worse than Adobe's - absolutely Kafkaesque. I've spent many hours on this so far now. What is going on?

Open the setup page of the router. Go to the wireless tab. Set the configuration view to manual.
Channel width should be on Standard 20MHz. Now you can change the channel to 6 or 11.
Click on Advanced wireless settings sub tab. Change the beacon Interval to 75, RTS threshold to 2307, fragmentation threshold to 2306. See if that works.
Download the latest firmware from Linksys website for your router. Save it on your computer. Open the setup page of the router. Go to Administration tab and click on firmware upgrade sub tab. Browse the firmware file that you have downloaded and upgrade it on your router.

Easy Link 1.6 no longer works and latest version states will not work with my router

I have the WRT54G router (version 8.00.2 firmware) and the Easy Link Software I got with it no longer works correctly (version 1.6), saying I am not connected to the internet even though I clearly am connected. (I theorize that it tries to connect by pinging Linksys and I cannot ping Linksys using any method, so I think Linksys no longer accepts pings.) I downloaded the newest version, thinking it would work, and the forum states it will only work with a few routers that are more recent (I bought mine in Jan 2008.) Am I out of luck, with no verion working correctly? I appreciated the information that was found in the Easy Link Advisor software that I no longer have.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

PCS no longer working with contacts and 6086

I have applied the latest release of PC Suite 6.84.10.3.
Previously the installed level was 6.83.14.1
The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
(translate it from french: The contact has been well recorded into the phone)
Folder browsing still works correctly, either the phone folder or the memory card folder
Need a fix or a way to install the previous version, at least for the contacts...
This is a really negative feedback!
Phil

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

System password no longer works after 10.9.4 update

YOU CAN READ MORE ABOUT IT HERE:
Re: Issues after Software OS X 10.9.4 (13E28) upgradeRe: Issues after Software OS X 10.9.4 (13E28) upgrade
Same problem, here, updated, pw n longer works, HOW TO FIX? Can’t install anything, any ideas?
HERE IS MY ENTRSFO, HOPE IT HELPS:
EtreCheck version: 1.9.12 (48)
Report generated July 18, 2014 at 11:49:39 AM PDT
Hardware Information:
27" iMac (Early 2011)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software:
OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27
Disk Information:
ST31000528AS disk2 : (1 TB)
EFI (disk2s1) <not mounted>: 209.7 MB
Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
HGST HUS724020ALE640 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 2 TB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
HGST HUS724020ALE640 disk1 : (2 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
LaCie d2 quadra (button) 400mbit - 800mbit max
EFI (disk4s1) <not mounted>: 209.7 MB
Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)
Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)
OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)
Recovery HD (disk4s5) <not mounted>: 650 MB
MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)
Avid Mbox Pro 400mbit - 400mbit max
Thunderbolt Information:
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files:
/etc/hosts - Count: 18
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support
[loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support
[loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support
[not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
[not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.line6.l6ksettingmgr.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.avid.mboxpro.helper.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
iTunesHelper
SpeechSynthesisServer
uTorrent
G-Technology Assistant
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
EPPEX Plugin: Version: 10.0 Support
iLokClientHelper: Version: 3.6 - SDK 10.5 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support
MagellanPlugIn: Version: 1.2 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Safari Extensions:
Conduit Search for Safari: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
UploadManager: Version: (null) - SDK 10.5 Support
Google Earth Web Plug-in: Version: 7.1 Support
ContentManager: Version: (null) - SDK 10.5 Support
RocketEngine: Version: (null) - SDK 10.5 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Line6AudioMIDI Support
Mbox Pro Support
YAMAHA-USBMIDIPatch Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB
Destinations:
TIME MACHINE [Local] (Last used)
Total size: 1
Total number of backups: 3
Oldest backup: 2013-10-21 19:02:42 +0000
Last backup: 2014-03-19 11:19:09 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 875.71 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      2% SGProtocolService
      1% DashboardClient
      1% WindowServer
      1% fontd
      0% Safari
Top Processes by Memory:
999 MB com.apple.SpeechRecognitionCore.speechrecognitiond
459 MB DaisyDisk
360 MB mds_stores
180 MB Safari
164 MB Mail
Virtual Memory Information:
8.79 GB Free RAM
4.12 GB Active RAM
1.46 GB Inactive RAM
1.62 GB Wired RAM
1.76 GB Page-ins
9 MB Page-outs
Like Show 0 Likes(0)

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

IPod Apps no longer work, Music disappears, Fix?

QUESTION : How to fix permanently the “iPod Touch Breakdown“?
(seems identical to the iPhone “Breakdown“)
Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
Here is what I call the “iPod Touch Breakdown“:
- Apps won’t start : the iPod would go back to the home screen after a few seconds.
- Music and Films disappear (My music consists essentially of personnal CDs).
- (for me Photos are still there)
- all original Apple Apps work OK
This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
Two ways:
see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
1- sync using iTunes
2- in iTunes/Store: deauthorize your account
3- sync
4- authorize
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
(the whole process may take several hours; I have also done a reboot between 3 and 4)
(ii) proposed by various people :
1- deselect all applications
2- sync
3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
4- select the Apps you want back
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
Sadly,
because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
Cheers
(*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

Same issue here since updating to 2.0.2; Is there a way to back I wonder?
So I plugged back in my iPod touch and,...
0. make a note of all your music, movies, photos, apps selections to restore
1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
3. clicked <OPTION>[Restore] once selecting my iPod touch device
4. navigate to <home>/Library/iTunes/iPod Software Udpates/
5. pick the prior update: iPod1,12.0.1_5B108Restore
6. then waited through iPod window status displays
'Preparing iPod software for restore...'
'Restoring iPod software...'
'Verifying iPod Software...'
7. OK the 'Your iPod has been restored to factory settings,...'
8. Ssync process did NOT automatically being so I unplugged & plugged it
(I did verify that 2.0.1 was loaded seeing the App Store)
9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
(mostly 'cause I couldn't be sure which was a good failsafe).
10. iTunes then begin setup of my [ahem] new iPod.
STOP IT; it'll try and do restore everything. Then navigate the tabs for
your iPod and re-select those things you want (music,photos,movies,apps,etc)
So like any computer you need to keep proper backups.
The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
HTH
/los "I was a teenage net-random"

LinkSys CIT400 no longer working

Similar Messages

Maybe you are looking for