Linksys EA4500 findet DSL Modem nicht

Hallo Zusammen,
wenn du denkst " ich kann das, ist ja einfach" Schlägt dir die Technik ein Schnippchen.
Ich habe folgende Harware:
DSL Modem Dlink DSL-321B
Linksys EA4500-EW
Laptop Win7 32 Bit
Das Modem ist konfigueriert und ich kann per Kabel direkt ins Internet.
Der Router wurde mit EasySetup eingerichtet und ich kann die Konfiguration ändern.
Der Assistent findet aber das Modem nicht (mitgeliefertes DSL-Kabel vom Modem an Internetport angeschlossen)
Es wird er Hinweis "Router ist eingerichtet aber... wir können nicht feststellen ob eine Internetverbindung möglich ist" angezeigt.
Meine Versuche manuel zu konfigurieren scheitern mit von kein Internet bis verabschiden des Routers. Auch ein Rest und eine neue Konfiguration bleiben erfolglos.
Jetzt zähle ich auf das Forum um die Kiste ans Netz zu bekommen.
Gruß Markus

Hallo,
Bitte gehen Sie hier für Hilfe zum Produkt:http://support.linksys.com/de-eu/support/routers/EA4500
Danke,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Similar Messages

  • Can't connect LINKSYS router to DSL modem

    I'm trying to set up a WRT54GS2 Linksys router with a D-Link DSL-2320b modem.  Have a Westell 6100 modem that is going bad, so I bought the D-Link to replace it. Originally had a D-Link router connected with the Westell, but the router overheats often and has to be reset.
    I have been able to connect to the internet using the DSL-2320b modem only, but once I add the Linksys router I am not able to connect to the modem. The Linksys router came from a cable modem connection for which it worked fine.  I'm sure it has something to do with the fact that they both use the same IP, 192.168.1.1.  I have tried changing the IP of the modem, but still having issues.
    Any help will greatly be appreciated.  I'm still able to use my old setup to connect to the internet now, but the Westell shut down my phone line today and had to be turned off and back on.  I'm hoping to be able to replace this as soon as possible.   Thanks in advance...

    Connect the Mode to the router on the Internet port and the computer to the router on the Ethernet port..If the IP address of the Modem is 192.168.1.x then,change the ip address of the linksys router to 192.168.2.1 and power cycle the entire network and check...

  • Port Forwarding for Counter Strike Server - DSL Modem to Linksys Router then to my Laptop (wifi)

    Hi,
    i have read many posts here but did not find any solution. Below is my current situation.
    Objective: I want to create a Counter Strike 1.6 Server and for that i have to forward port 27015.
    Networking Issues: Im currently using a Shiro (Dsl Modem) which is given by my ISP & i have connected my DSL modem to my Linksys WRT54G (ver 7.2) router. I connect my laptop thorugh wifi to router.
     I know basic port forwarding but that does not help me. I need a complete tutorial on this issue coz i dont have much network knowledge.
    waiting for reply
    thank you

    Try this link to forward port for Counter Strike on the router.

  • I have a Mac connected to Internet via DSL modem. Just bought iPad (today). What hardware do I need to set up wireless LAN so iPad can be used anywhere in house? Will Linksys work with Apple?

    I have a Mac connected to Internet via DSL modem. Just bought an iPad2 and need to know what hardware do I need to add wireless LAN so I can use iPad anywhere in the house. Will a Linksys router work with Apple? Can Mac be "hardwired" and iPad wireless? Probably stupid questions but I need to learn. Thanks.

    Bob Timmons wrote:
    Thanks for the info. You are correct. I was speaking in general terms here based on my experience with the two devices in day to day use, and not in terms of exact specifications.
    A better choice would have been to say that the "coverage" is about the same with the edge going to the Extreme....due to the newer mutliple antenna design.
    We sure could use more help on the forums. Hope that you will become a regular.
    Hi Bob
    RF is a minefield, but one that I have worked in for ages, the most critical factor in my experience is location, location, location!
    Better routers have more intelligently designed antenna systems, output power as I said is the same, radiation pattern (coverage) is dependent on antennas and physical location more than all other factors.

  • Managing DSL modem (web interface) via Linksys WRT610N router.

    I have a router WRT610N Version 1.0 connected to my DSL gateway (3wire). My PC is connected to WRT610N. All is working fine except: If I set Linksys Internet connection type in DHCP I am able to see my DSL modem (3wire) via web interface from my PC. But, if I set Linksys Internet connection type in PPPoE I can't connect to my DSL management web page from my PC via Linksys to DSL modem.
    FYI, I need PPPoE for DDNS.
    Any idea?

    Correct. If you configure PPPoE the modem is inaccessible because it works like a standard modem. That's normal. With PPPoE on the WRT the WRT is connected directly to the internet and there are not really any settings on the DSL modem/router which you have to change.

  • DSL Modem + Linksys Router

    Hello
    I have DSL Modem connected with linksys router and linksys router is connected with normal switch all our workstations are directly connected with switch. now let me tell you the configuration also.
    DSL MODEM
    ISP DEDICATED IP : ***.***.**.**
    LOCAL IP : 192.168.1.1
    DHCP ENABLED
    LINKSYSROUTER
    DHCP ENABLED
    LOCAL IP: 192.168.2.1
    LINK IP: 192.168.1.5 (Assigned by DSL MODEM DHCP)
    DNS: Assigned by DSL Modem
    WORKSTATION
    LOCAL IP: Assigned by Linksys router for e.g 192.168.2.100
    Now my problem is that after every one hour we get disconnect from the router when we ping the router 192.168.2.1 from workstation it says "Request timed out" and when we give a power cycle to router its repling by ping command, I am also using WLAN on this router.

    Why so difficult?
    DSL MODEM
    ISP DEDICATED IP : ***.***.**.**
    LOCAL IP : 192.168.1.1
    DHCP ENABLED
    set dhcp range from .50 to .200
    LINKSYSROUTER
    DHCP disabled
    LOCAL IP: 192.168.1.2
    LINK IP: not used, only use the router side(wan=empty)
    DNS: fixed to 192.168.1.1
    WORKSTATION
    LOCAL IP: Assigned by DSL for e.g 192.168.1.50...200
    You might need to add a static LAN route on the linksys like
    192.168.1.0 -> 192.168.1.1 (mask 255.255.255.0)
    Message Edited by linkwpw on 04-09-200704:57 AM

  • Connecting a WRT54G Wireless Broadband Router to a Westell DSL Modem

    For some reason I can't get my wireless router to finalize the last step on installation on my desktop. I followed all the tutorials from the linksys help center and I still can't get the router to install correctly. I did ipconfig/release and ipconfig/renew. I made sure the IP address was in the 169.xxxxx range. Changed the default IP on the web based utility from 192.168.1.1 to 192.168.2.1  . When I changed all of the info mentioned before I could get internet service to my base computer, but I could not get passed the last step of installing the router and no wireless to any laptops. I have done everything by the book and it still doesn't work. If there is anyone that could help me, I would really appreciate it. I have DSL Internet service throught AT&T. My router is a WRT54G and my DSL Modem is a Westell Modem, Its black square shaped with five lights on the front.

    As your Internet Service Providor is DSL follow this link

  • Westell ProLine 6100 DSL modem with generic wireless router

    I am planning to purchase the Starter Verizon high speed internet plan.  It comes with a free Westell ProLine 6100/6110 DSL modem.  The combined modem and wireless router is $55.  I have a wireless router (Linksys and Cisco).  Can I use the Linksys or Cisco wireless router with the Westell ProLine DSL modem, or will I have compatibility problems?  Thanks.

    To use that modem with a router, I point to:
    URL: http://www.dslreports.com/faq/13600
    Location: All DSLR (dslreports.com) FAQs » Verizon Online DSL FAQ » Hardware » How do I use a router with the Westell 6100?
    ^^
    Otherwise, you will...
    #1 NOT be able to go anywhere online because of Double NAT.
    #2 Or if you can go some where online then..
    ..For example: If you want to allow users from the net to connect to your computer, you can't just portforward in your generic wireless router. You must also portforward in the Westell 6100. (Called Double NAT Forwarding)
    Points to: portforward.com -> Other Guides -> Port Forwarding Behind Two Routers?
    ^^
    I will leave this up to you on what you want to do. Good luck.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Trouble connecting a BEFW11S4 to a netopia dsl modem

    hi,
    I'm trying to connect my BEFW11S4 router to a netopia dsl modem via an ethernet cable.  The router doesn't seem to be able to get an ip from the modem.  the modem's log doesn't even show any attempts from the router   Any ideas for what to try? 
    I just want to extend the wireless network that i have already from the netopia, whether via bridging or routing, i don't care.  
    thanx,
    steev
    Solved!
    Go to Solution.

    Thanks but I've already tried what's described. I've tried it with 2 different 2nd routers.
    One weird thing I observed with my latest attempts is that once I got the 2nd router on the same subnet, connected to the 1st router via LAN ports,  I could actually ping the 1st router from behind the 2nd, only with something like 80% packet loss. In fact I could ping out to the internet but also with 80 to 90 percent packet loss, and no http. And I can't ping the 2nd router from the Netopia (the Netopia has a little ping utility on it)
    here's another possible clue: in the Netopia log there are entries like this:
    00:00:15:20 LHD: Interface  Eth 100BT, State offline
    00:00:15:20 LHD: IP  192.168.0.2, MAC 00-0c-41-4f-f0-fe
    00:00:15:19 LHD: Interface  Eth 100BT, State suspect
    00:00:15:19 LHD: IP  192.168.0.6, MAC 00-23-32-2f-52-f9
    00:00:15:19 LHD: Interface  Eth 100BT, State suspect
    00:00:15:19 LHD: IP  192.168.0.2, MAC 00-0c-41-4f-f0-fe
    00:00:11:45 LHD: Interface  Eth 100BT, State online
    00:00:11:45 LHD: IP  192.168.0.77, MAC 00-23-32-2f-52-f8
    .77 is a host connected directly to the Netopia.
    .2 is the 2nd router (connected via a LAN port). 
    .6 was the machine i was pinging from (connected to a port of the 2nd router).
    What's the 'state suspect' business? Could the Netopia somehow be not "trusting" the connection from the 2nd router, for some reason? Or...?
    It seems like this has to be some problem with the Netopia, because the same thing happens with 2 different 2nd routers a linksys and a netgear, and the linksys worked fine when i was using it behind a motorola cable modem.  the thing is, the Netopia is brand new and provided by Qwest...

  • Problems hooking up my router to my dsl modem

    ok, first off I have a emachines computer running on windows millenium edition. A westell dsl modem model 6100, and a linksys wireless G 2.4ghz broadband router  model number wrt54gs version 6. all this connects to a 3com  etherlink xl 10/100 pci tx NIC model number 3C905B-TX. Lastnight I searched for any and all help I could find to install this router due to the multiple problems I had trying to get it all to work together, just as I finally got it working 5 hours later, it was bed time and I shut it all down. I woke in the morning to use the computer and was heavily irritated to find myself back at no internet connection and was unable to get any of this equipment to work again. Now finally after I restored my computers operating system and resetting my dsl modem, I have internet again. I just bought this router and I am very disappointed in how difficult it has been. If anyone could help me on installing this, give me details on exactly what to change, or do to make this work, I would be very grateful. I am aware of the issues between westell modems, verizon dsl and linksys routers. From what I have read its almost not designed to all work together at all unless you tweak with it forever and ever and never shut your equipment down. Please if anyone can help, give me step by step instructions or your experiences that could help me make it work right, please respond, thank you.

    Use this LINK as a reference to configure your router to use a DSL connection.  Also go to the linksys web site and make sure your router has the latest firmware.  If not download the latest version and update it. 
    Richard Aichner (Ikester)

  • WRT54G & Westell DSL Modem/Router

    I want to use the WRT54G as a WAP or signal repeater to extend the range of my Westell 327W DSL modem/wireless router. Is there a way to do that? I'd like to put it halfway between my wireless router and another wireless computer in my house.
    Message Edited by rweintra on 08-08-2007 05:13 AM

    That router can not be used as a repeater.  You can turn it into a wireless access point but it will not repeat the signal from another wireless router with the linksys firmware.  You can try to look for a third party firmware that may give you that option but if you do install a third party firmware it will void any warrenty you have on that router. 
    Check this LINK for other firmware.
    Richard Aichner (Ikester)

  • Westell DSL modem connects to WRT54GX2 SRX 200 with wire

    I follow the instructions found on this site..  The first couple of times the procedure did not work.  On the MODEM ( Westell) needed a manual  reset.  At that time  the network starting working.
    A note needs to added to this instruction as stated above.   The title of the instruction  is:
    Setting up DSL on a Linksys Router using a wired connection
    Thanks for the good info
    BlackSteel

    Mahalo nui, 
    Hawaiian Telcom, my internet provider did, a while back, go into the bridge setup for the WRT54G, and yes, you are absolutely correct that it need be hardwired into the DSL modem. 
    Since going wireless is the goal, I see no extra benefit to the additional WRT54G hardware.
    From the Airport Extreme Setup Manual, under "Using the Airport Extreme with a Broadband Internet Service", again, still need to hardwire to the DSL modem. 
    No mention of the "Wireless Bridge" function so I am unsure, though will try to use the USB port on the Dell to make her wireless. If not there, then maybe the USB Iomega Drive. As the Iomega reads both PC and Mac files which is important, wireless access would be a benefit.
    So my thoughts are that as long as the DSL modem wireless network coverage is acceptable, there is no benefit to hardwiring in additional APs with wireless capability.
    Maybe though, the additional hardware would diminish the click-clicking. On the other hand, a square waveform is easy to enhance and modulate with analog voice, think!....
    Thanks, aloha

  • DSL modem in the Airport - does it exist?

    OK, this is either going to be a stupid question or one everyone's tired of hearing, so please forgive me.
    Over the last year, we've purchased over a dozen different routers for various premises and uses. Netgear, D-Link, Belkin, LinkSys, etc. - I personally like to try different brands and units just to see what’s available. The glaring omission here is Apple’s own technology.
    I bought a couple of Airport base stations years ago but never went back as there doesn’t seem to be an option for one with an ADSL modem built in. Is there? I just saw Apple have released another variant but still no modem. Am I missing something obvious here? Is there some technical reason they can’t incorporate a broadband modem?
    I guarantee you: if Apple’s product had a simple DSL modem in it, we would’ve just bought a heap of them and the other manufacturers would’ve been left out in the cold. As I said, maybe such a thing exists but we’ve been too blind to see it. Thank you for any explanations you may be able to give.

    Hello again. Thank you for your consideration. I made the mistake of being presumptuous. Here in Ireland, we have little choice in terms of DSL service. There are a few companies but the only thing that would change - when switching supplier - is the username, password, IP and DNS numbers, etc. Hence, all of the routers we’ve purchased have DSL modems built-in and we just configure accordingly.
    My apologies. I just thought it was such a simple thing to do as all the other manufacturers seem to do it and for less money than what the Airport Extreme BS cost. The issue is more complex than I thought [especially in other countries] but I still can’t help but think if everyone else can do it, why not Apple...?
    Thank you again.

  • What's the best DSL modem to go with my EA6500 ?

    Hi All,
    I'm showing my ignorance around modems and routers here but here we go...
    I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.
    What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?
    My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?
    Any suggestions on what type/brand/speed of modem I should consider most appreciated...
    thanks
    Tony

    Cisco does not have a plain DSL modem but they do have an ADSL gateway (modem/router) with model number: X3000. There is no such thing as a gigabit internet speed offered by an ISP (not that I’ve known of) but this gateway has a gigabit port which means that the modem is capable of supporting adapters with gigabit link/card speed. To know more about that gateway then check on the link below.
    Getting to know the Linksys X3000 Linksys X3000 product features and specifications

  • Bridge mode for airport extreme or dsl modem? Recomendations?

    I'm upgrading to a 'blisteringly fast' 12 Mbps with my local DSL ISP (no cable in my area), and I'm thinking of changing out my
    My current, antiquated setup is with a Speedstream 5200 Modem/Router (8 Mbps max) with a Linksys E1200 802.11n router. We have an Apple TV with HDMI into a stout Panasonic plasma, 2 Macs, 3 iPads (2xgen4 + mini), 3 5C iPhones and an old Dell Winbox (XP vintage that I will toss out) that access this configuration in a good-sized house (2 stories, ~4000 sq.ft.).
    The Linksys 'n' speed router is somewhat adequate, but we want to do movie/video/music streaming to the AppleTV and we want to buy a new Mac (probably a Mac-mini to replace the Winbox). I also want to future-proof this setup for a few years, given the pain it usually is to do a wholesale swap-out like what I'm contemplating. I want to swap-out this pairing with:
    a DSL modem/router to either a Netgear DM111PSP-100NAS (ADSL2+) or an older, but robust Actiontec GT-701D (or the newer -NF).
    an Airport Extreme (802.11ac) to manage my Apple menagerie for fast streaming, and also to hang a poor man's network file storage off the USB port.
    I'm asking for some recommendations from the community at-large so I can minimize the hassles when I do this swap-out.  Which of the two devices (the modem/router or the AE router) should I put in bridge mode? Any performance penalties one way or another, or hidden gotchas?
    Thanks in advance.
    Craig

    I'm back and wanted to put a coda on this thread.
    First of all, many thanks to the recommendations by Tesserax and LaPastenague.  You helped allay my fears in converting over to the Time Capsule environment.
    The home network is working just great.  Internal speed-ups all the way around.  TC is working great as both a file server AND a Time Machine site.  The Netgear DSL modem is the firewall and the DHCP server for my network.  As stated in earlier posts, it has superior firewall capabilities compared to the Time Capsule.  I configured the Time Capsule to Bridge Mode with my iPhone 5C, the configuration of which only took a couple of minutes.  The speed between the 802.11 ac devices, my TC and the new Mac Mini, are unbelievably fast--on the order of 150+ Mbps at a distance of 40 feet or so through several walls--beamforming really does appear to work as advertised.  That doesn't matter overall except for the Time Machine aspects, as my DSL line is a blisteringly fast 12 Mbps.
    The only glitch I've had over the last 3 weeks was due to a short power outage, and the main problem was the networking with hard ethernet connection to the Time Capsule.  I had to reboot the Netgear modem, as it was in a funky state, while other devices, such as my new Mac Mini, were waiting for the modem to vend a DHCP address.  It turns out that the Apple TV had some persistence with its old DHCP-vended address, and the Mac Mini somehow received its IP address first--which conflicted with the Apple TV.  Now, I'm not sure why the wirelessly networked Mac Mini beat the Apple TV to receiving a DHCP vending first, but it did, and the address persistence of the Apple TV created a conflict on the Apple TV network connection.  Once I realized the problem, I shut down the Mac Mini and made sure all my other devices were off as well.  I then restarted the entire network, the Apple TV received its IP address first, and all was well again.  Granted, I could have disconnected the ethernet and allowed really fast wireless to the Apple TV, but it's only 4 feet away from the Time Capsule, so I might as well have the fastest pipe available for HD streaming to my large-format HD television.
    The switchover was absolutely painless.  Both the modem and the Time Capsule took, all total, about 10 minutes to set up and configure.  Much easier than with Winboxes.  Other than the Apple TV IP conflict after the power outage, it's been a real delight.
    I'm very happy I switched to this new network configuration.

Maybe you are looking for