Linksys pap2 without router

hi
i recently created account with iconnecthere.com and got broadband phone adapter from linksys PAP2t. I am using bsnl as my broad band service provider from india. Can i use pap2t without router? i mean that can i set connection as modem to pap2t withount router?
thanks for cooperation.

It seems your modem is also a router since the IP address that you got was 192.168.1.3 and you also have a default gateway of 192.168.1.1. Now if it is really a router/modem in one, then you can connect your PAP2T and your computer to this modem/router and both devices should be able to get online. Otherwise, if this modem is just a modem and not a router then only one device will get online at a time; either PC only or PAP2T only.
Now for the PAP2T to be able to get dial tone, you need to make sure that all your VoIP account info from iconnecthere is properly configured in the PAP2T.
If you are not sure how to configure it, you better go to www.linksys.com/kb and select VoIP under products then pap2. Click on the search button and look for KB article 5198 which you can use as a reference on how to set your pap2t.

Similar Messages

  • Linksys WRT54GSV4 Wireless Router

    Hi
    I have a Linksys WRT54GSV4 Wireless Router with frimware version 1.06.1.
    I have a internet connection that can performe 100Mbit/s. But when i check my connection with "TP Test" I only get ~40Mbit/s. I do the test without the router and I get 80Mbit/s+.
    Why is that? How do I get the router to pass through the traffic at high speed?
    Thanks....

    I guess you should get the latest firmware 1.00.9

  • Trying to setup my Linksys WRT54G Wireless Router but having trouble.

    Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
    But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
    I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
    If you can reply speaking English and not too much computer language that would be fantastic.
    Many thanks

    Hi candn14 and welcome to the forums!
    Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
    Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
    Setting-Up a Router with Cable Internet Service
     Setting-Up a Router with DSL Internet Service
    Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
    Here are the steps:
    Setting-Up the Wireless Settings on a Router
    And please secure your network w/ a password.
    Setting-Up Wireless Security on a Linksys Router
    Please feel free to ask any questions again if you encounter any problems. Hope this helps.

  • Hookup Linksys Broadband Cable Router with Linksys Hub

    Hello All,
    New here and have ran into an issue and I thought what better place to go then to here for help.
    Ok here is my situation.  I am currently running cable internet with the LinkSys RT31P2 Broadband Router and the LinkSys EFAH05W 5 Port Workgroup Hub.  I currently have 2 IP's one is shared and one is running 1 system as we have 3 computers.
    I had issues awhile back with one of the IP's not registering after the cable company changed my IP addy's.  They told me I had the hardware wired improperly and that was the cause of my issue.  Well since then I got the one computer running on it's IP without changing anything.  Now all the sudden that computer cannot connect to the internet again.
    Here is the way I have it wired.  Wire from Cable modem going into Hub (Uplink slot), then a Grey wire from the #1 slot in Hub running to router (Internet slot)  The one system with it's own IP is hooked up to the #2 slot in the hub and the other 2 shared connecting computers in the 1&2 Slots of the Router.
    Now I am wondering one of 2 things: 1) IP is blocked for some reason from the cable company or 2) the Hub has gone bad.  Cause if I unhook the the one system on its own IP and plug it into the #3 slot in the router it gains access to the net.  If I unplug one of the system on the router and plug it into the hub I loose internet.
    My 2 questions are pertaining to this thread is:
    1) is there a way to tell if the hub is actually bad as it is about 5+ years old?
    2) Is my wiring setup properly before I call the fricking cable company back and go round and round with them?  Last time I battled them for like a total of 5 Hours on the phone and via live chat about the wiring and really don't want that headache again
    Thanks much in advance for your help and expertise on these questions.
    Much Appreciated.
    Ron S.

    Just connect the computer with its own IP(i think it is static IP) directly to modem and see if it works, to test if IP address is blocked. Connect router to modem directly to check if modem gives IP address to router. If both work individually, hub might be the issue.

  • Configuring IPCop with Linksys PAP2 Adapter

    I want to configure my Linksys PAP2 Adapter with the IpCop.. Any thing regarding this can be very helpfull....
    Thanks

    Hi… I think IpCop is just another router, so just go ahead and install the PAP2 as per instructions. Only thing is that IPCop have only one Ethernet port, so get a switch and connect the IpCop to the switch and connect the PAP2 to the switch. Revert back if have any specific error while configuring the PAP2.

  • Linksys Wireless N Router w/ Belkin Wireless G Adapter Connection?

    I recently bought a Linksys wireless n router to better serve my two new laptops with wireless n cards. They are now lightning fast and super reliable. However, my desktop, which has a Belkin wireless g card connects about a third as fast and last only about 5-10 minutes before needing to be reconnected, which can cometimes take a while itself. I changed the channel to 11 which helped a little and am running the router on 20 MHz only.
    My previous router was a Belkin wireless G.
    I'm looking for answers/explanations and possible solutions to speeding up my desktop's speed and increasing its reliability w/o jeopardizing my laptops' supreme performance.
    Thanks for your help,
    ~Josh

    Set the Channel Width to 40MHz only,Wide Channel to 9 and Standard Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Under the Security tab,uncheck.. dw(vs_internetfilter0);Filter Anonymous Internet Requests and click on save settings..Now,power cycle the router and check...

  • In an attempt to configure Linksys PAP2 VOIP adapter, I a...

    In an attempt to configure Linksys PAP2 VOIP adapter, I am constantly receiving this message, "Your phone may be plugged into incorrect phone port. Please try the other port." Manual reboot did not solve the problem. Can anyone help?

    Hello,I am partheeban.Have you got to fix the problem.Me al so have same problem.If you sole that let me know.How you did.this is the massage i have got on my phone
    This is the voice massage i have got it from my phone.
    Connected in the incorrect phone port. Please try other port. If you believe
    your correct port. Please log on to your web account to check your states of
    your service O108.
    This is the voice massage i have got it when you pickup the phone
    immediately the voice massage will comes.
    Thanks

  • Error when trying to sign into Linksys WRT 120N router management page, indicates browser authentication not capable - a HTTP401 error.

    In trying to get into the Linksys WRT-120N router's management utility browser, I was unable to sign in. After resetting the router multiple times and exhausted all the variants of the username/password combination that I can find and think of, I was still unable to sign in to the utility browser. Just for the sake of trying something different, I opened IE 8 browser and was able to sign in just fine. This tells me that FF has a problem with authentication, somewhere along the request information aren't being sent correctly to allow signing in to the utility page of the router.

    hi , here is a step by step for for you need to do..
    a:- Do not use the setup disc....remove it and keep is somewhere safe.
    b:- Disconnect the USB cable from the modem and PC and keep it somewhere safe as well
    c:-turn off the modem and PC....
    d:- with the power plugged in....reset the linksys router for 1 minute...once done , unplug the power.
    e:- connect the modem to the "internet" port of the router and connect the PC to one of the other ports..
    f:- turn on the modem only.....wait for 1 minute for the modem to initialize
    g:- turn on the router and PC.
    h:- on the PC...hit "start">>"run">>cmd and enter ....now the black window should stay up......type ipconfig and enter.....the IP u get should be 192.1638.1.100....if so...
    i:- bring up your web browser and key in http://192.168.1.1 and hit go.....type the password as "admin" when prompted...
    j:- under the setup page....look for an find MAC address clone.....enable and "clone"......save settings and check if you are going online.

  • Hi,   I just bought a linksys WRT54G Wireless Router. My...

    Hi,
    I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
    While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
    I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
    What is wrong?
    Thanks in Advanced

    Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

  • Linksys WRT110 Wireless Router

    I need to setup my Linksys WRT110 wireless router for  wireless use as well as a router between my cable modem and my desktop PC. So far, I cannot find any documentation on how this is done or if it is possible at all. When I called Linksys support they told me it can be done and provided me with a link to the instructions, however, they did not work. Does anyone know if this is possible? I need to setup in order to work from home and I cannot use a wireless connection to my cable modem but I need a router between my desktop PC and my cable modem. Oh, by the way, I have a new HP desktop which is running Windows 7.  I would appreciate any help someone can lend me.  Thank you. SHH

    From what i read on your post looks like your trying to use your wrt110 as a wireless access point and you want to still use your router near your modem.
    To do this what you have to do is disable your wrt110 as a dhcp server since your other router near your is acting as the dhcp server.
    So what you do is hook a cable to your wrt110 in port 1. type in 192.168.1.1 in the address bar of your internet explorer.For now this 192.168.1.1 number will get you into the wrt110 until you change it to 192.168.1.5  under setup you will see 2 areas. Under the ip address type in 192.168.1.5 so this make your wrt110 have this ip address.
    Below that you will see DHCP server setting disable this. So your wrt110 will not act as the dhcp server it will act as a wireless access point.
    Now if you type 192.168.1.1 in your web brower that will open the configuration screen of the router next to your modem. Which that dchp server setting will be enabled.
    So basically from your modem your first router will route the signal from the modem thru the router to the computers hooked to it. then say you run a cable from that router to the wrt110.So basically your just uplinking to the wrt110. only thing is your wrt110 will have to act as a access point instead of a router.
    Your main router configuration screen to get into it. you would type 192.168.1.1 in your brower after you setup your wrt110 an disable the dhcp server and set the ip to 192.168.1.5 when you type this number  the 105 number in your browser it will go into the web config screen of the wrt110
    So to access the web config screens of both routers they will have different numbers.
    1st router by your modem will be 192.168.1.1
    2nd wirless one will be 192.168.1.5 which you changed when you when in and disable it as a dhcp server since your 1st router by your modem acts as the dhcp server.
    Hopefully this will help. I know it does get a little confusing been there and done that more then once.  If not call linksys on the phone tell them what products you have and how you want it to work they will walk you thru it.
    My setup in my home from my modem it connects to a 4 port router, then from there to a 24 port switch then uplinks with a Power over Ethernet adapter which sends power thru this little adapter over the brown pair in the cable so you dont need a electrical outlet where you put your wireless access point/router. Then from my switch it uplinks with that POE to a Wrt110 upstairs in my home. I know what a pain this can be i've call them more then once to get mine setup and working.
    GOOD LUCK HOPE THIS HELPS

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • Configure dj 2540 printer for wireless print thru samsung grand (without router)

    how to configure  dj 2540 printer for wireless print thru samsung glaxy grand mobile (without router)

    Hi patede,
    Welcome to the HP Support forums.  I see that you would like to learn how to set up your Deskjet 2540 printer to be able to print wirelessly from your Android mobile device when you don’t have a router.
    I have included the document titled Printing from an Apple or Android Mobile Device with HP Wireless Direct.  The document will walk you through setting up the printer and  how to print from your Android mobile device.  Please note that when you are connected to the printer’s network you will not have access to the internet.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Activity posting without routing

    Hi, Experts
    we are implementing product costing in a power plant, where activity quantity could not be measurred, client want to transferred activity cost to production order without routing, please suggest there is any option in sap to transferred activity cost to production, via allocation cycle or, any other method.
    rgds,
    rakesh

    Hi Rakesh,
    If you cant measure, then how would you allocate...
    If you are trying to allocate means, you have some basis of allocation in your mind, i guess
    I would suggest calculate the basis outside, and enter it as an activity qty from Cost Center to the prod order via KB21N...
    You can also allocate from cost ctr to prod orders, but that will be cumbersome...
    Regards
    Ajay M

  • How can I turn off my Linksys 1200 wireless router?

    Hi,
    I just got a Linksys 1200 wireless router and wanted to know how (and the best way) I can turn it off (besides unplugging it) when I am out of town? 
    Thanks

    hi there.
    there is no on/off switch in the router. these devices are meant to run 24/7 so there's no off on it.

  • My Linksys E1200 wireless router stopped working

    Hi, my Linksys E1200 wireless router stopped working. When my checked my network it said "Limited Connection." However, when I connect my ethernet cable directly to the modem my internet works fine.
    Can someone help me with this?

    @JeffNewYork
    Are you getting that error hardwired to the router? Or wireless? Since the internet is working directly to your modem, you may need to reset and reconfigure the router depending on the settings from your Internet Service Provider (ISP).
    Setting up a Linksys router with Cable Internet service
    Setting up a Linksys router with DSL Internet service
    Setting up a router with a Static IP account
    Good luck! 

Maybe you are looking for