Linux cpio images with the 9i database problem

Hi,
I have downloaded the 3 gzip files for linux, and converted them to cpio files, then exctracted everything, everything is okay till here.
But I don't have enough disk space for the instllation + the images, so my question is how to convert the 3 exctracted disks into 3 iso files and burn them into cds, I can't seem to find the right parameters for 'mkisofs' command, because that tool keeps renaming files into its own, Anybody could help ???

I'm not sure how much space you have.
I am also VERY new to installing Linux (of any version) and Oracle.
I would try to download one image file at a time.
run gunzip on it,
then run the CPIO -idmv command provided by the Oracle download site and then delete the <file>.cpio.
Copy the <directory>/Disk1 to a /mnt/cdrom/
Delete the <directory>/Disk1 and start from scratch with file2.gz.
Just a suggestion from a newbie.

Similar Messages

There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?

Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

There is a problem with the Office database - Office 2011

Good day!
I recently installed Office 2011 for Mac and i'm getting the following error message: There is a problem with the Office database. Excel comes up with the error message but i am able to get past the error and open the application, but it freezes when I try on Word. I have to force quit the application to close it completely.
I've searched online and tried all the suggestions - even those from the discussion board: Problem with Office Mac 2011 database. I've completely removed traces of the software : http://support2.microsoft.com/kb/2398768 and reinstalled using the disc, as well as followed suggestions to rebuild the database. I also installed the latest Office update: http://www.microsoft.com/en-us/download/details.aspx?id=44026 from Excel (As it was the only one I know of that's functioning after the error message) but to no avail.
Here are the tech specs:
OS X
version 10.9.5
Office 2011 for Mac
Version 14.4.4 (140807)
Update: 14.4.4
Hope you guys can point me to the right direction. Any suggestions are greatly appreciated.

Best ask question on one of the Microsoft boards.
Could try NeoOffice.
https://www.neooffice.org/neojava/en/index.php

How to mark (psd) Images with the Circle Symbol without duplicating them

I would like to import my layered images in Aperture.
The problem is i would like to further adjust them in photoshop cs3 without creating a duplicate.
Is there a possibility to mark this images with the Circle Symbol (for edited with external editor) or do I really have to open each image than close again, delete the master and then the remaining image with the circle can be opened and further enhanced in Photoshop without duplicating the image.
Another example:
I like to open a psd file within aperture with: edit with Adobe Photoshop CS3.
The Image should open without being duplicated. Then I could drag the layer into another PSD document and close it again.
Right now I would end up with a Master Duplicate which I have to delete afterwards.
I know I could use referenced files and say show in finder but I like managed better,
also:
Show in finder does show you only one image (I like to do that to 5 or 10 images at once).
bc

Like I said if you want to get into the programming business you can modify the aperture database directly but I don't know of an easier way with managed masters. You can always just do your workaround to files that you are actually working on and you only need to do it once.
Sorry there is no answer to easier answer to deal with all of them at the same time. At least none I can think of off the top of my head.
RB
Ps. Lightroom can just open your PSD files but that is an apples and oranges thing. Lightroom is not trying to manage your masters for you in a managed library an ensure that nothing modifies them, if you are ok with that method than referenced files should be ok with you as well, you can always use referenced for your legacy PSDs and use a managed methodology for your new images going forward starting with the source image.

Moving Images with the mouse

Sorry I am still fairly new to Java. I have a project due that will require me to move images with the mouse. And I was wondering if someone could give me the basics of doing this. Right now I only need to know how to move the image any where on the screen.

sweety_baby wrote:
It's not so usefull nebody plzz help me i wanna code for movinag an image from one place to another in frame
plzzzzzzzz help me out its urgentIf it's so d�mn urgent, then why
1) dredge up a thread that's more than 2 years old, and
2) provide us with hardly any information about your problem, what you've done, what's worked, what's failed.
Result: request denied.

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
Data migrated:
Migration rate:
Error:
MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server
FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824
Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288
StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624
dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856
dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115
Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970
StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
The Source Server is Running Exchange 2007.
I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
I would appreciate any help you can give me!
Thanks,
Jon

Any update if you have resolved the issue.
Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

9 month old Zen Micro with the headphone jack problem

So, I've been putting up with the headphone jack problem for a few months now, and i've finally decided to get it repaired or fixed. I emailed Creative a few months back and they told me to send it in. My question is, since I am out of warranty, will they repair the unit or send me a whole new one all together?
thanks,
mike

Actually, I just sent in my 7-month old Micro in b/c of the headphone jack problem and they sent me a brand new shrink-wrapped one. They <EM>didn't </EM>charge me for anything. All I had to do was wait 2 weeks for them to send it back to me (grueling but doable) and pay about 2.44 for shipping the micro to them. So now I'd have three batteries if it weren't for the fact that one of them swelled up; I have NO IDEA how that happened. So yeah I guess the point of the post is that you don't get charged anything even if you're out of the 90-day labor warranty.

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

When clicking "Save image as" how can I get Firefox to auto add a (1) (2) etc at the end of the filename if an image with the same filename already exists?

How can I get Firefox to automatically rename images when clicking "Save image as" on the menu, when an image with the same file name already exists in the folder??

Hello,
That is not a feature that is supported natively within Firefox but there are various add-ons which I think will do the job you need.
The one I have used is [https://addons.mozilla.org/en-US/firefox/addon/web-slide-show/?src=search Web Slide Show]. This is primarily an add-on for viewing a slideshow of images when they are presented as thumbnails on a web page. However once you are in the slideshow there is a download button which will download all the images in the slideshow. It will automatically rename the images if an image with the same name already exists in the folder.
If you don't like that add-on then here are some others that may do the same job:
* [https://addons.mozilla.org/en-US/firefox/addon/image-download-%E2%85%B1/?src=search Image Download II]
* [https://addons.mozilla.org/En-us/firefox/addon/image-picker/ Image Picker]
I hope that helps. Let me know if not.
Also I notice that you are using Firefox v23. That is now an outdated version. To get the latest security updates I suggest updating to version 24. See the support article here: [[Update Firefox to the latest version]].

DUPLICATE DATABASE IN ANOTHER HOST WITH THE SAME DATABASE NAME

Hi all.
I want duplicate a database(dbteste1 host:wander) to another host(magda) with the same database name.
My tnsnames in host wander is this:
DBTESTE1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = wander)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dbteste1)
DBTEST1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = magda)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dbteste1)
Tnsping is ok !!!
Follow the rman command;
RMAN> run
duplicate target database to dbtest1 nofilenamecheck;
and i get the following message:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE falhou
ORA-01504: o nome 'dbtest1' do banco de dados nÒo corresponde ao parÔmetro db_name 'dbteste1'
If i run this command:
RMAN> run
duplicate target database to dbteste1 nofilenamecheck;
and i get the following message:
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: RMAN-20021: database not set
RMAN-06031: could not translate database keyword
I´m using oracle 9.2.0.7 on Windows

Wrong procedure and connection command,
check Oracle document,
Duplicating a Database with Recovery Manager
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmdupdb.htm#RCMUG012
Follow all steps listed.

Capture a part of an image with the mouse ?

Hi,
I am really stuck with it ! I would like to capture a part of an image with the mouse. The selection can be a rectangle or an ellipse. For a rectangle a could use PixelGrabber but for an ellipse ?
Thanks a lot !

thanks a lot !

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application"

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

Multiple image upload with save to database problem

I am developing some backend work for a client, and we recently used the Multiple image upload with save to database wizard without a problem. A few days later, we noticed that we could only upload a single file at a time - it seems that the coding is no longer able to access the flash part of this and is using the javasript function instead. I know the web hosting company has made some changes on the server, and I did some reearch and it seems that there could be an issue with Flash 10, but has anyone else experienced anything like this? Any help is greatly appreciated.
Thanks.
Jeremy

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Connection problems with the Olite database

Hi,
I have a problem when I want to execute a BPEL Process from the process manager. I get a java.sql.SQLException with the following message "[POL-3207] a corrupted data page was detected".
The fact is that another person (with his own account) installed the SOA Suite and executed the same code before and it worked. But when I connected to the computer remotely using my account and tried to execute the BPEL Process this error appeared. Since then even the former user has the same error message. Is there a way to solve this problem or do I have to reinstall the SOA Suite? Is there a problem using the SOA Suite with different windows accounts?
When I also try to see the instances after executing the process, I get the following error:
The following exception occured while processing this request:
Cannot find instances.
An attempt to fetch the instances using the where condition "" from the datastore has failed. The exception reported is: [POL-3207] a corrupted data page was detected
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_ci WHERE ci_domain_ref = 0 ORDER BY ci_modify_date desc
Oracle BPEL Console v10.1.3.1.0
Is there a GUI program to access the Olite DB instead of using the mobility sql in the command prompt?
Any help would be greatly appreciated.
Amir

Hi rajesh,
You restart your Olite database. You can do one thing.
Goto control panel->Administrative tools->services-> Stop & start Olite multiuser service.
Then try to run the polsql.cmd command.
Hope this works fine.
Cheers,
Abhi...

Linux cpio images with the 9i database problem

Similar Messages

Maybe you are looking for