Linux Interrupts VISA - 0xBFFF003A Unable to start operation because set up is invalid (due to attributes being set to an inconsistent state.)

Hello!
I have question about VISA and Linux. I am trying to set and detect interrupts using the VISA commands on the LINUX platform.
I am able to read and write to the hardware using other VISA commands. I am not able to set or detect interrupts.
I used the driverwizzard to set up the .inf file.
I have read some questions and answers on the forum and have not been able to gain any success.
Does any one have any ideas or know of any fixes to get the interrupts to work?
Any help is appreciated.
Madwagon

Hello,
I'd like to direct your attn to a knowledge base, which addresses your issue. This KB is was originally written for windows operating system, but it implies as much to any other operating system. I'll also appreciate if you can tell me a little more about your set up i.e how are you servicing the interrupts and which device will be generating these interrupts? I'm also attaching a link to another discussion forum that might be helpful to fix this error. Hope these resources will be helpful.
Thank you,
Arjun K
http://digital.ni.com/public.nsf/allkb/dff952e483e212658625712b007b72fb
http://forums.ni.com/ni/board/message?board.id=140&message.id=15342&requireLogin=False
National Instruments
Applications Engineer

Similar Messages

Unable to Start Operation, Refreshing Cache. Pleas...

Hi, I have N9 and since last 3 days I am not having any download and installation also the updation. I have already updated the PR1.2 and it's fine. Only the problem when I go for new download message appears " Unable to Start Operation, Refreshing Cache, Please Wait" in the Screen.
Many many thanks in advance if anybody can advise me to resolve this issue.
Solved!
Go to Solution.

@dshiwakoti
Go to Settings > Security > Developer mode > move white dot to right and accept prompt
Launch Terminal as new icon ( ~ $) will now have appeared and type the following on each line followed by tapping enter:-
devel-su
rootme (password unless altered by user)
rm /etc/apt/sources.list.d/filemanager.list (to delete the problematic repository - note space after rm )
- Reboot the device
- Open X-Terminal
devel-su
rootme
apt-get update
Can't take credit for the above from My-Meego forums
Happy to have helped forum with a Support Ratio = 42.5

TS4009 unable to start ipad because not enough storage?

unable to start ipad because not enough storage? Why

You're iPad won't start? Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Encore unable to complete operation due to hardware error ?

encore unable to complete operation because of hardware error ?

These questions below may be for a different product... but the kind of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Linux+Oracle:Unable to start the DSCManager

Hello
I installed LCES on Linux+Oracle.When start Jboss,some errors like this:
2007-08-02 11:51:01,493 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
com.adobe.idp.DocumentError: The document pointing to the file "/opt/jboss_adobe_new/server/all/svcnative/DocumentStorage/docm1185965642591/0538f4740b03 e39d8e86e521ff9aa9cc" has expired. Consider increasing the document disposal timeout.
at com.adobe.idp.DocumentFileBackend.checkFileExistance(DocumentFileBackend.java:256)
at com.adobe.idp.DocumentFileBackend.copy(DocumentFileBackend.java:263)
at com.adobe.idp.Document.passivate(Document.java:744)
at com.adobe.idp.Document.passivate(Document.java:691)
^^^^^^^
and
2007-08-02 11:51:01,572 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$11.doInTransaction(Compon entRegistryImpl.java:665)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Caused by: java.lang.ClassNotFoundException: com.adobe.idp.scheduler.SchedulerServiceImpl
at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingImportExport(DSContainerSearchP olicy.java:446)
at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingParentLast(DSContainerSearchPol icy.java:300)
^^^^^^^^^^^^^^
and
2007-08-02 11:51:01,633 ERROR [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason: Internal error.
2007-08-02 11:51:01,643 WARN [com.adobe.idp.dsc.startup.DSCStartupServlet] Unable to start the DSCManager
Can somebody help me?
Thanks.

One suggestion I can make is to re-deploy the solution components (DSCs).
- Jayan

Unable to start UCM Idc server in linux 64-bit

hi,
we are faceing error's to start the UCM Idc server in linux 64-bit
1) error
*WARNING:        Unable to start server at /oracle/ucm/server/.**
**WARNING:          /usr/bin/env LDLIBRARY_PATH= /oracle/ucm/server/shared/os/linux64/bin/UnixProcCtrl exec /oracle/ucm/server/etc/idcserver_start_**
**WARNING:          Starting the Content Server etidbdev... The server terminated unexpectedly._**
**WARNING:          (internal)    07.18 11:20:04.836      main    !syFileUtilsDirNotFound,Review install settings. . .**
**WARNING:          Content Server Core Folder: /oracle/ucm/server**
**WARNING:          Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/!csLogUnableToAccessDir**
**_WARNING:          'CheckoutAndOpenInNative' component, version '2008-06-17', extends checkoutandopeninnative feature(s)**
WARNING: 'ContentFolios' component, version '1.0.0.87 ($Rev: 65280 $)', extends Folios:1.0.0-1.0.0.87 feature(s)
WARNING: 'ConfigMigrationUtility' component, version '2008_07_01 (build 51)', extends ConfigurationMigration:1.0-1.0.0.51 feature(s)
WARNING: 'FileStoreProvider' component, version '2008_05_21 (build 17)', extends FileStoreProvider feature(s)
WARNING: 'Folders_g' component, version '2008_07_25 (build 24) ($Rev: 65025 $)', extends folders:7.2-1000.0.0.24 feature(s)
WARNING: 'Helper' component, version '6.2 20080410T1355', extends Helper:6.2-0.0.558.1215716087 feature(s)
WARNING: 'InboundRefinerySupport' component, version '2008_07_16 (build 22)', extends Inbound Refinery:8.1.0.0 feature(s)
WARNING: 'CoreWebdav' component, version '2008_05_27 (build 17)', extends webdav:2.0-2.0 feature(s)
WARNING: 'FCKEditor' component, version '2007_06_19 (build 7)', extends FckEditor feature(s)
WARNING: 'NativeOsUtils' component, version '080222 (build $Rev: 61118 $)', extends NativeOsUtils feature(s)
WARNING: 'ContentAccess-linux' component, version '080222 (build $Rev: 64037 $)', extends ContentAccess:10gR3-8.1.9 feature(s)
WARNING: 'ComponentTool' component, version '080710 10gR3 (build $Rev: 64602 $)', extends ComponentTool feature(s)
WARNING: 'CoreUserInterfaceLibrary' component, version '2008_07_30 ($Rev: 65084 $)', extends CoreUserInterfaceLibrary feature(s)
WARNING: 'PopUpCalendar' component, version '2008_06_24 ($Rev: 64134 $)', extends PopUpCalendar feature(s)
WARNING: 'YahooUserInterfaceLibrary' component, version '2008_08_05 ($Rev: 65289 $)', extends YahooUserInterfaceLibrary feature(s)
WARNING: 'iTextComponent' component, version '2007_10_15 (build 2) ($Rev: 56511 $)', extends iTextComponent:2.0-1.0.0.2 feature(s)
WARNING: Failed to initialize the server.
WARNING: (internal) 07.18 11:20:49.752 main !csFailedToInitServer (!syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver)-exception stack
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
2) error
WARNING: Failed to initialize the server.
WARNING: (internal) 07.18 11:20:49.752 main !csFailedToInitServer (!syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver)-exception stack
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
WARNING: at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:954)
WARNING: at intradoc.server.IdcServerManager.init(IdcServerManager.java:79)
WARNING: at IdcServer.init(IdcServer.java:64)
WARNING: at IdcServer.main(IdcServer.java:37)
WARNING: Unable to create directory 'Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver'.
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
WARNING: at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:954)
WARNING: at intradoc.server.IdcServerManager.init(IdcServerManager.java:79)
WARNING: at IdcServer.init(IdcServer.java:64)
WARNING: at IdcServer.main(IdcServer.java:37)
WARNING: Unable to start server at /oracle/ucm/server/.
WARNING: /usr/bin/env LD_LIBRARY_PATH= /oracle/ucm/server/admin/etc/idcadmin_start
WARNING: Starting the Admin Server... The server terminated unexpectedly.
WARNING: (internal) 07.18 11:20:50.520 main !syFileUtilsDirNotFound,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/!csLogUnableToAccessDir
WARNING: Unable to create directory 'Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver'.
NOTICE: Finished install type Install with warnings at 7/18/11 11:20 AM.
please help on this ASAP
advance thank you.

hi,
we are faceing error's to start the UCM Idc server in linux 64-bit
1) error
*WARNING:        Unable to start server at /oracle/ucm/server/.**
**WARNING:          /usr/bin/env LDLIBRARY_PATH= /oracle/ucm/server/shared/os/linux64/bin/UnixProcCtrl exec /oracle/ucm/server/etc/idcserver_start_**
**WARNING:          Starting the Content Server etidbdev... The server terminated unexpectedly._**
**WARNING:          (internal)    07.18 11:20:04.836      main    !syFileUtilsDirNotFound,Review install settings. . .**
**WARNING:          Content Server Core Folder: /oracle/ucm/server**
**WARNING:          Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/!csLogUnableToAccessDir**
**_WARNING:          'CheckoutAndOpenInNative' component, version '2008-06-17', extends checkoutandopeninnative feature(s)**
WARNING: 'ContentFolios' component, version '1.0.0.87 ($Rev: 65280 $)', extends Folios:1.0.0-1.0.0.87 feature(s)
WARNING: 'ConfigMigrationUtility' component, version '2008_07_01 (build 51)', extends ConfigurationMigration:1.0-1.0.0.51 feature(s)
WARNING: 'FileStoreProvider' component, version '2008_05_21 (build 17)', extends FileStoreProvider feature(s)
WARNING: 'Folders_g' component, version '2008_07_25 (build 24) ($Rev: 65025 $)', extends folders:7.2-1000.0.0.24 feature(s)
WARNING: 'Helper' component, version '6.2 20080410T1355', extends Helper:6.2-0.0.558.1215716087 feature(s)
WARNING: 'InboundRefinerySupport' component, version '2008_07_16 (build 22)', extends Inbound Refinery:8.1.0.0 feature(s)
WARNING: 'CoreWebdav' component, version '2008_05_27 (build 17)', extends webdav:2.0-2.0 feature(s)
WARNING: 'FCKEditor' component, version '2007_06_19 (build 7)', extends FckEditor feature(s)
WARNING: 'NativeOsUtils' component, version '080222 (build $Rev: 61118 $)', extends NativeOsUtils feature(s)
WARNING: 'ContentAccess-linux' component, version '080222 (build $Rev: 64037 $)', extends ContentAccess:10gR3-8.1.9 feature(s)
WARNING: 'ComponentTool' component, version '080710 10gR3 (build $Rev: 64602 $)', extends ComponentTool feature(s)
WARNING: 'CoreUserInterfaceLibrary' component, version '2008_07_30 ($Rev: 65084 $)', extends CoreUserInterfaceLibrary feature(s)
WARNING: 'PopUpCalendar' component, version '2008_06_24 ($Rev: 64134 $)', extends PopUpCalendar feature(s)
WARNING: 'YahooUserInterfaceLibrary' component, version '2008_08_05 ($Rev: 65289 $)', extends YahooUserInterfaceLibrary feature(s)
WARNING: 'iTextComponent' component, version '2007_10_15 (build 2) ($Rev: 56511 $)', extends iTextComponent:2.0-1.0.0.2 feature(s)
WARNING: Failed to initialize the server.
WARNING: (internal) 07.18 11:20:49.752 main !csFailedToInitServer (!syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver)-exception stack
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
2) error
WARNING: Failed to initialize the server.
WARNING: (internal) 07.18 11:20:49.752 main !csFailedToInitServer (!syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver)-exception stack
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
WARNING: at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:954)
WARNING: at intradoc.server.IdcServerManager.init(IdcServerManager.java:79)
WARNING: at IdcServer.init(IdcServer.java:64)
WARNING: at IdcServer.main(IdcServer.java:37)
WARNING: Unable to create directory 'Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver'.
WARNING: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver
WARNING: at intradoc.common.FileUtils.checkOrCreateDirectoryPrepareForLocks(FileUtils.java:344)
WARNING: at intradoc.server.IdcSystemLoader.loadLogInfo(IdcSystemLoader.java:668)
WARNING: at intradoc.server.IdcSystemLoader.loadCaches(IdcSystemLoader.java:954)
WARNING: at intradoc.server.IdcServerManager.init(IdcServerManager.java:79)
WARNING: at IdcServer.init(IdcServer.java:64)
WARNING: at IdcServer.main(IdcServer.java:37)
WARNING: Unable to start server at /oracle/ucm/server/.
WARNING: /usr/bin/env LD_LIBRARY_PATH= /oracle/ucm/server/admin/etc/idcadmin_start
WARNING: Starting the Admin Server... The server terminated unexpectedly.
WARNING: (internal) 07.18 11:20:50.520 main !syFileUtilsDirNotFound,Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/!csLogUnableToAccessDir
WARNING: Unable to create directory 'Review install settings. . .
WARNING: Content Server Core Folder: /oracle/ucm/server
WARNING: Java virtual machine: Sun Java 1.6.0 JDK/groups/secure/logs/archiver'.
NOTICE: Finished install type Install with warnings at 7/18/11 11:20 AM.
please help on this ASAP
advance thank you.

Unable to start Forms designer in Linux O/s

Hi,
I have installed Forms6i for linux on my linux workstation. I am able to connect to my database but unable to start forms designer. Its giving me this error
FRM-91111 : Internal error. Windows system startup failure.
FRM-10039 : Unable to start forms builder.
Can anybody help me with this problem. Its very urgent

I am having the exact same problem. I have downloaded Forms6i for Linux from OTN. I have been able to load it and updgrade some 4.5 forms using f60gen, but I have not been able to get the designer to work. I get the same message FRM-91111. ANy information would be greatly appreciated.

My installation of photoshop elements 13 was interrupted, I can't seem to get it restarted, so I restarted my computer and am still unable to start the download again. What do I do to get the download restarted?

My installation of photoshop elements 13 was interrupted, I can't seem to get it restarted, so I restarted my computer and am still unable to start the download again. What do I do to get the download restarted?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

VISA - unable to queue operation & device reported an input protocol error.

To summarise I have two main questions:
How can I clear the VISA operation queue and what causes an input protocol error during transfer?
I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.
If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:
-1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."
Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).
This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.
Reason for small timeouts:
Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.
What causes the VISA protocol error? I can't find much information on it.
Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:
-1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."
Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?
Some NI I/O trace captures attached to show what happens and test VI.
Using LV2014 SP1
Attachments:
VISA problems.zip ‏38 KB

I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.
I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me
This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem
Trying your short timeout with a loop, I do not get what I or you expected.
If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.
BUT! If I try setting the timeout to something below the needed 175 ms like your 100ms...
Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.
But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.
I never see the queue error that you are seeing
How long does it take to do a simple *SAV
I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.
Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads
Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.
Is the SAV command on your instrument so long that you need to be able to break out of the loop?
Omar

Unable to start form listener on linux

Hi,
i have just installed 9iAS with oracle 8.1.6 on same redhat7.1
m/c
when I'm unable to start the form server, a listener error occur
error is like this............
$ forms60_server start
Stopping Forms Server processes on port 9001
f60ctl stop port=9001 mode=socket
port=9001
mode=cosket
choosing default pool 1 for this process........
1
Could not find Forms Listener om port 9001
Starting Forms Server processes on port 9001
f60ctl start port=9001 mode=socket
port=9001
mode=socket
Choosing default pool 1 for this process......
1
Forms environment:.......
Failed to exec runform f60webm [error:2]
Forms listener started on port 9001
In last it says form server started but when I execute any form
through browser it gives error
I haven't install form6i on my machine
is this the reason or any thing else
what should I have to do run form server
thanks in advance
Akhil

This is a common problem, if you have gcj (the GNU GCC java clone) in your path. My two suggestions are:
1. Deinstall GCJ or
2. Put the JDK bin directory in your PATH variable in front of everything
Works fine for me,
--olaf

Unable to start xorg after latest nvidia update

Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
Alexey

I just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core

Unable to start WC_Spaces managed server

Iam unable to start WC_Spaces managed server form console/managed weblogic. below is the error.
C:\WC\user_projects\domains\WebCenter_domain\bin>startManagedWebLogic.cmd WC_Spa
ces http://localhost:8888
'WLS_MEM_ARGS_64BIT' is not recognized as an internal or external command,
operable program or batch file.
'WLS_MEM_ARGS_32BIT' is not recognized as an internal or external command,
operable program or batch file.
Launcher.exe version: 11.1.1.4.1 (internal 7.3.2.0)
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize
=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\WC\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\WC\patch_wl
s1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WC\patch_oep
e180\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WC\patch_ocp3
71\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WC\patch_adfr11
11\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WC\JDK160~1\lib
\tools.jar;C:\WC\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\WC\WLSERV~1.3\server\l
ib\weblogic.jar;C:\WC\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\W
C\WLSERV~1.3\server\lib\webservices.jar;C:\WC\modules\ORGAPA~1.1/lib/ant-all.jar
;C:\WC\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:/WC/ORACLE~2/ucm/idc/component
s/NativeOsUtils/classes-NativeOsUtils.jar;C:\WC\ORACLE~1\soa\modules\commons-cli
-1.1.jar;C:\WC\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:
\WC\oracle_common\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-
api.jar;C:\WC\Oracle_WC1\wcps-services-app\modules\oracle.wcps_11.1.1\wcps-conne
ction-mbeans.jar;C:\WC\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\WC\WLSERV~1
.3\common\derby\lib\derbyclient.jar;C:\WC\WLSERV~1.3\server\lib\xqrl.jar;C:\WC\O
RACLE~2\ucm\idc\jlib\idcloader.jar;C:\WC\ORACLE~2\ucm\idc\components\NativeOsUti
ls\classes-NativeOsUtils.jar;
PATH=C:/WC/ORACLE~2/ucm/idc/components/EmailMetadata/lib;C:/WC/ORACLE~2/ucm/idc/
components/NativeOsUtils/lib/win32/7.2.1.1;C:/WC/ORACLE~2/ucm/idc/components/Sit
eStudio/lib;C:/WC/ORACLE~2/ucm/idc/components/SiteStudioPublisher/lib;C:\WC\patc
h_wls1036\profiles\default\native;C:\WC\patch_oepe180\profiles\default\native;C:
\WC\patch_ocp371\profiles\default\native;C:\WC\patch_adfr1111\profiles\default\n
ative;C:\WC\WLSERV~1.3\server\native\win\32;C:\WC\WLSERV~1.3\server\bin;C:\WC\mo
dules\ORGAPA~1.1\bin;C:\WC\JDK160~1\jre\bin;C:\WC\JDK160~1\bin;C:\app\skora\prod
uct\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft Platform SDK\bin\win64\x86\AMD64;c:\Program Files\Mic
rosoft Platform SDK\Bin\win64\AMD64;c:\Program Files\Microsoft Platform SDK\Bin;
c:\Program Files\Microsoft Platform SDK\Bin\Winnt;C:\PERL\BIN;C:\Program Files (
x86)\Intel\CPP\Compiler80\ia32e\bin;c:\program files (x86)\intel\cpp\idbe80\bin;
c:\jdk150\bin;c:\jdk160\bin;C:\MKSNT;c:\Program Files\WinZip;c:\orautil;C:\WC\WL
SERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\WC\JDK160~1\bin\java -client -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -
XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=WC_Spaces -Djava.security
.policy=C:\WC\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.security.SSL.trus
tedCAKeyStore="C:\WC\wlserver_10.3\server\lib\cacerts" -Xverify:none -da -Dpla
tform.home=C:\WC\WLSERV~1.3 -Dwls.home=C:\WC\WLSERV~1.3\server -Dweblogic.home=C
:\WC\WLSERV~1.3\server -Dcommon.components.home=C:\WC\ORACLE~1 -Djrf.version=11
.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logge
r -Ddomain.home=C:\WC\USER_P~1\domains\WEBCEN~1 -Djrockit.optfile=C:\WC\ORACLE~1
\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\WC\
USER_P~1\domains\WEBCEN~1\config\FMWCON~1\servers\WC_Spaces -Doracle.domain.conf
ig.dir=C:\WC\USER_P~1\domains\WEBCEN~1\config\FMWCON~1 -Digf.arisidbeans.carmll
oc=C:\WC\USER_P~1\domains\WEBCEN~1\config\FMWCON~1\carml -Digf.arisidstack.home
=C:\WC\USER_P~1\domains\WEBCEN~1\config\FMWCON~1\arisidprovider -Doracle.securit
y.jps.config=C:\WC\USER_P~1\domains\WEBCEN~1\config\fmwconfig\jps-config.xml -Do
racle.deployed.app.dir=C:\WC\USER_P~1\domains\WEBCEN~1\servers\WC_Spaces\tmp\_WL
_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\WC\ORAC
LE~1\modules\oracle.ossoiap_11.1.1,C:\WC\ORACLE~1\modules\oracle.oamprovider_11.
1.1,C:\WC\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle
.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Djps.auth.debug=false -D
tangosol.coherence.log=jdk -DjiveHome=C:\WC\USER_P~1\domains\WEBCEN~1\config\fmw
config\servers\WC_Spaces\owc_discussions -DUSE_JAAS=false -Djps.policystore.hybr
id.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true
-Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.
logging.impl.UserContextImpl -noverify -Doracle.webcenter.analytics.disable-nati
ve-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -Djava.awt.head
less=true -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+Dis
ableExplicitGC -Dportlet.oracle.home=C:\WC\oracle_common -Dwc.oracle.home=C:\WC\
Oracle_WC1 -Ducm.oracle.home=C:\WC\ORACLE~2 -Dem.oracle.home=C:\WC\oracle_commo
n -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.manag
ement.server=http://localhost:8888 -Dwlw.iterativeDev=false -Dwlw.testConsole=f
alse -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\WC\patch_wls1036\prof
iles\default\sysext_manifest_classpath;C:\WC\patch_oepe180\profiles\default\syse
xt_manifest_classpath;C:\WC\patch_ocp371\profiles\default\sysext_manifest_classp
ath;C:\WC\patch_adfr1111\profiles\default\sysext_manifest_classpath weblogic.Se
rver
<Jun 7, 2013 1:48:13 AM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 7, 2013 1:48:13 AM CDT> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 7, 2013 1:48:13 AM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following e
xtensions directory contents added to the end of the classpath:
C:\WC\user_projects\domains\WebCenter_domain\lib\mbeantypes\csp-id-asserter.jar;
C:\WC\user_projects\domains\WebCenter_domain\lib\mbeantypes\jps-wls-trustprovide
r.jar>
<Jun 7, 2013 1:48:13 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsyste
ms Inc.>
<Jun 7, 2013 1:48:14 AM CDT> <Info> <Security> <BEA-090065> <Getting boot identi
ty from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Jun 7, 2013 1:48:23 AM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jun 7, 2013 1:48:25 AM CDT> <Emergency> <Management> <BEA-141151> <The admin se
rver could not be reached at http://localhost:8888.>
<Jun 7, 2013 1:48:25 AM CDT> <Info> <Configuration Management> <BEA-150018> <Thi
s server is being started in managed server independence mode in the absence of
the admin server.>
<Jun 7, 2013 1:48:25 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STARTING>
<Jun 7, 2013 1:48:25 AM CDT> <Info> <WorkManager> <BEA-002900> <Initializing sel
f-tuning thread pool>
<Jun 7, 2013 1:48:25 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log fil
e C:\WC\user_projects\domains\WebCenter_domain\servers\WC_Spaces\logs\WC_Spaces.
log will be rotated. Reopen the log file if tailing has stopped. This can happen
on some platforms like Windows.>
<Jun 7, 2013 1:48:25 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log fil
e has been rotated to C:\WC\user_projects\domains\WebCenter_domain\servers\WC_Sp
aces\logs\WC_Spaces.log00014. Log messages will continue to be logged in C:\WC\u
ser_projects\domains\WebCenter_domain\servers\WC_Spaces\logs\WC_Spaces.log.>
<Jun 7, 2013 1:48:25 AM CDT> <Notice> <Log Management> <BEA-170019> <The server
log file C:\WC\user_projects\domains\WebCenter_domain\servers\WC_Spaces\logs\WC_
Spaces.log is opened. All server side log events will be written to this file.>
<Jun 7, 2013 1:48:30 AM CDT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm myrealm.>
<Jun 7, 2013 1:48:30 AM CDT> <Error> <Configuration Management> <BEA-150000> <An
error occurred while establishing a connection back to the adminstration server
t3://127.0.0.1:8888 during startup. Since bootstrap succeeded check that t3://1
27.0.0.1:8888 uniquely identifies the administration server.
javax.naming.ServiceUnavailableException [Root exception is java.rmi.NoSuchObjec
tException: The object identified by: '31' could not be found. Either it was ha
s not been exported or it has been collected by the distributed garbage collecto
r.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:70)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:32)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:792)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLI
nitialContextFactoryDelegate.java:431)
at weblogic.jndi.Environment.getInitialReference(Environment.java:245)
Truncated. see log file for complete stacktrace
Caused By: java.rmi.NoSuchObjectException: The object identified by: '31' could
not be found. Either it was has not been exported or it has been collected by t
he distributed garbage collector.
at weblogic.rmi.internal.OIDManager.getServerReference(OIDManager.java:2
51)
at weblogic.rmi.extensions.server.ServerHelper.getLocalInitialReference(
ServerHelper.java:455)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:131)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLI
nitialContextFactoryDelegate.java:427)
Truncated. see log file for complete stacktrace
>
<Jun 7, 2013 1:48:31 AM CDT> <Critical> <WebLogicServer> <BEA-000362> <Server fa
iled. Reason:
There are 1 nested errors:
javax.naming.ServiceUnavailableException [Root exception is java.rmi.NoSuchObjec
tException: The object identified by: '31' could not be found. Either it was ha
s not been exported or it has been collected by the distributed garbage collecto
r.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:70)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:32)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:792)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLI
nitialContextFactoryDelegate.java:431)
at weblogic.jndi.Environment.getInitialReference(Environment.java:245)
at weblogic.server.channels.RemoteChannelServiceImpl.registerInternal(Re
moteChannelServiceImpl.java:173)
at weblogic.server.channels.RemoteChannelServiceImpl.registerForever(Rem
oteChannelServiceImpl.java:146)
at weblogic.protocol.ConnectMonitorFactory.registerForever(ConnectMonito
rFactory.java:88)
at weblogic.management.provider.MSIService.registerForReconnectToAdminSe
rver(MSIService.java:174)
at weblogic.management.mbeanservers.compatibility.internal.Compatibility
MBeanServerService.start(CompatibilityMBeanServerService.java:154)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: java.rmi.NoSuchObjectException: The object identified by: '31' could
not be found. Either it was has not been exported or it has been collected by t
he distributed garbage collector.
at weblogic.rmi.internal.OIDManager.getServerReference(OIDManager.java:2
51)
at weblogic.rmi.extensions.server.ServerHelper.getLocalInitialReference(
ServerHelper.java:455)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:131)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLI
nitialContextFactoryDelegate.java:427)
... 9 more
>
<Jun 7, 2013 1:48:31 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<Jun 7, 2013 1:48:31 AM CDT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<Jun 7, 2013 1:48:31 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>

try starting managed server with startManagedWebLogic.cmd WC_Spaces without adding any parameter, I know this works in linux with startManagedWebLogic.sh WC_Spaces

[SOLVED] Terminator stopped working Unable to start shell:/bin/bash

Hello,
I just wanted to share as I didn't found anything about it,
Since yesterday I can't launch my favorite terminal emulator which is terminator, it gives me :
Unable to start shell:/bin/bash
displayed in terminator window where I'm supposed to type commands.
What is strange is that I can launch /bin/bash in tty's plus I installed xterm temporarily which works fine with bash.
One more thing is that if I close terminator window it closes my graphical session !
Any idea to troubleshoot this ?
Last edited by detestable (2013-08-16 08:39:54)

I'm getting this :
me@latitude ~ $ gdb /usr/bin/python
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/python3.3...(no debugging symbols found)...done.
(gdb) run /bin/terminator
Starting program: /usr/bin/python3.3 /bin/terminator
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
File "/bin/terminator", line 103
except (KeyError,ValueError), ex:
^
SyntaxError: invalid syntax
[Inferior 1 (process 13780) exited with code 01]
I also tried gnome-terminal which is not working correctly (installed right now)
From the user interface it says in red :
"There was an error creating the child process for this terminal"
"grantpt failed: Operation not permitted"
From gdb :
m@latitude ~ $ gdb /usr/bin/gnome-terminal
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/gnome-terminal...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/gnome-terminal
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7ffff7ffa000
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
[New Thread 0x7fffea2b9700 (LWP 13839)]
Error: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._vte_2dpty_2derror.Code1: grantpt failed: Operation not permitted
[Thread 0x7fffea2b9700 (LWP 13839) exited]
[Inferior 1 (process 13835) exited normally]
Only xterm seems to work

Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package

Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
NOTE: Tried to execute package from command line and it works...
Error starting debugging.
ADDITIONAL INFORMATION:
Unable to start program 'DTS'.
Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
Thanks,
Nayan
<a href="http://binaryworld.net/blogs"> Visit My Blog</a>

Hi Nayan,
According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
Download and install the latest Microsoft SQL Server Service Pack.
Cumulative Update package SQL Server Service Pack.
Download and install Microsoft Visual Studio 2010 Feature Pack 2.
For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Help. Windows 7: The application was unable to start correctly (0xc0150002).

I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
Oh, and I've already tried installing and uninstalling it.

Without system information nobody can say anything. also check the logs in the Event Viewer.
Mylenium

Linux Interrupts VISA - 0xBFFF003A Unable to start operation because set up is invalid (due to attributes being set to an inconsistent state.)

Similar Messages

Maybe you are looking for