Linux Ubuntu: connection Failed
Greetings,
do you know if there are some issues using ConnectNow from
Linux Ubunt, using Firefox? With this configuration (and also with
Opera 9.6, unsupported but perfectly working both in win XP and win
Vista), I tryed to joyn a room, as guest, that I had opened on
another machine (running win XP).
The application loaded ok, and when I selected meeting the
bar properly loaded 'ntil full 100%, and then a page from Adobe
informed me that Connection Failed. It was impossible to establish
a connection, etc.
So I guess if it is a more general issue with Linux.
Thanks for your attention
Hello cinacchio,
Thanks for your post!
I'm looking into your issue at the moment, and will get back
to you when I have more good information for you!
In the meantime, have a look at
http://www.adobe.com/go/kb403684
which is the Linux docufment for Acrobat.com
In there you can see if there is any information that makes a
difference there!
Otherwise I'm looking into this! :)
Cheers,
Pete
Similar Messages
-
SAPGUI7.10rev9 on 64bit Linux - Connection failed
Hi, I installed SAPGUI7.10rev9 on 64bit Linux and try to connect to the SAP Netweaver2004s Test Drive. The connection failed:
Attempt to load shared library /opt/SAPClients/SAPGUI7.10rev9/bin/libJPlatin.so failed.
The library file exists, so either the program has insufficient privileges to access the library or the library is not loadable by the shared object loader.
Please recheck the system requirements for your operating system and make sure all required libraries are installed.
I follow the note 1018530. The 32bit JAVA is installed JRE1.5.0_19. My profile is:
PATH=$PATH:$HOME/bin/:/home/roland/jre1.5.0_19/bin/
export JAVA_HOME=/home/roland/jre1.5.0_19/
export PLATIN_JAVA_VER=1.5.0_19
export PLATIN_JAVA=$JAVA_HOME/bin/java
The permissions of /opt/SAPClients/SAPGUI7.10rev9/bin/libJPlatin.so are:
-rwxr-xr-x. 1 root root
Could you help me?
Thanks RolandHello Roland,
please also have a look at [note 909250|https://service.sap.com/sap/support/notes/909250].
Is "ldd libJPlatin.so" giving some hint?
Maybe the 32-bit C++ runtime lib or some other library is missing.
Best regards
Rolf-Martin -
Please Help: Error! Connection failed to MaxDB (Linux)
Hello,
our current situation is, that we copied manually (after a system crash) all files under /sapdb from an old backup into the our (empty) Live system. Only the database files under sapdb/KRT/sapdata comes from the chrashed SAP system. These files are not lost.
If we start the Sap System following messages appears:
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
09:04:34 27.04.2010 LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - v2.12, AMD/Intel x86_64 with Linux, 2008/01/02
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 5469) is already running .....
saposcol already running
Running /usr/sap/EC6/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/ec6adm/startdb.log
Database start failed
DB startup failed
Our system administrator is ill and i'm not a system administrator.
Could you help me ?
Thank's lot
FranzSome additional informations:
/home/ec6adm/startdb.log:
Di Apr 27 09:04:34 CEST 2010
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Di Apr 27 09:04:34 CEST 2010
Checking required environment variables
SAPSYSTEMNAME is >EC6<
Start database with xuserkey >c<
Di Apr 27 09:04:34 CEST 2010
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Di Apr 27 09:04:34 CEST 2010
Starting XServer
12916 XSERVER Found other running x_server with version 'X64/LIX86 7.6.03 Build 009-123-163-622'
12902 XSERVER started, 'already...'
Di Apr 27 09:04:34 CEST 2010
Starting database
Starting Database Instance...
Error! Connection failed to node kurt for database KRT:
database not found
Opening Database...
Error! Connection failed to node kurt for database KRT:
database not found
Di Apr 27 09:04:34 CEST 2010
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed -
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
h1. Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Author: Dude
Version: D
Last modified: 14-Jan-2012
You are welcome to add comments, but please do not discuss your installation issues in this thread. If you have a question about the instructions, please add a simple note to the link of your own thread. The instructions are the result of my own research and development. If you would like to use any of the information for your own blog or website, please include a link to this reference to include future changes.
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
h2. Purpose
This document outlines instructions how to install Oracle XE under Ubuntu 11.10.
Ubuntu or Debian based Linux is not on the list of supported operation systems according to the Oracle documentation at http://download.oracle.com/docs/cd/E17781_01/install.112/e18802/toc.htm. You may want to consider virtualization software like Oracle Virtualbox and install Oracle Enterprise Linux as a free and professional alternative to installing XE under Ubuntu. You can also download pre-build virtual machines that include Oracle XE. You can browse http://otn.oracle.com/community/developer-vm for more information.
h2. Topics
h4. 1) Install Linux Ubuntu
h4. 2) Remote Terminal
h4. 3) Install Additional Software
h4. 4) Managing Swap Space
h4. 5) Modify Kernel Parameters
h4. 6) Oracle Home Directory
...a) Resize the Root Partition
...b) Setup External Storage
h4. 7) ORA-00845: MEMORY_TARGET
h4. 8) Installing Oracle 11gR2 Express Edition
h4. 9) Post-Installation
h4. 10) Tips and Troubleshooting
...a) Port 1521 appears to be in use by another application
...b) cannot touch `/var/lock/subsys/listener': No such file or directory
...c) ORA-00845: MEMORY_TARGET
...d) Apex ADMIN password
...e) SYS and SYSTEM password
...f) Uninstall Oracle 11g XE
...g) Reconfigure Oracle 11g XE
...h) Gnome Classic desktop
...i) Unix vi cursor keys
...j) Backup Database
h4. 11) History
h4. 12) References
h2. 1) Install Linux Ubuntu
The following assumes you have installed Ubuntu 11.10 Desktop Edition for AMD 64-bit, or upgraded from a previous version. Keep in mind that Oracle 11gR2 Express Edition is only available for 64-bit architecture. It is not necessarily a requirement, but I would not bother to install Oracle 11gR2 XE on a system with less than 2 GB of RAM installed. You can download Ubuntu for free at: http://www.ubuntu.com/download/ubuntu and install it using the default settings provided.
You can apply the latest OS patch-sets by clicking the power button icon in the upper right hand corner of the screen and selecting "Updates available..."
h2. 2) Remote Terminal
You will need command line access to perform the installation tasks. Select the top "Dash Home" button of the Unity toolbar and enter the word "terminal", or use CTRL-ALT-t. If you prefer to open a remote terminal session use SSH. Ubuntu does not come with a secure shell login by default. To install it, use the following command:
sudo apt-get install openssh-serverYou cannot login as root unless you set a root password using the "sudo passwd root" command. However, you can get root user access using the "sudo" command, which requires only to re-enter the password of your personal account. Access to "sudo" is controlled by the /etc/sudoers file.
The best way to establish a remote command line session as root is to login with your personal account, e.g.: ssh [email protected], and then type "sudo su -" to become root, or use "sudo <command>" to execute individual commands. If your account does not have "sudo" access you can login as root using "su - root", but will need to know the root password.
h2. 3) Install Additional Software
Oracle 11g Express Edition requires additional software that is not installed by default:
sudo apt-get install alien libaio1 unixodbch2. 4) Managing Swap Space
Oracle demands that the minimum swap space for Oracle Database XE is 2 GB (2095100 KB) or twice the size of RAM, whichever is lesser. Enter the following shell command to verify your swap space:
cat /proc/meminfo | grep -i swap
SwapCached: 0 kB
SwapTotal: 2095100 kB
SwapFree: 2095100 kBYou can increase available swap space by using a swap file as long as disk space permits. The advantage of a swap file versus a swap partition is flexible space management because you can add or delete swap space on demand as necessary. The following will create and enable an additional 1 GB swap file at system startup, located in the /home directory:
Login as root:
sudo su -Enter the following commands:
dd if=/dev/zero of=/home/swapfile bs=1024 count=1048576
mkswap /home/swapfile
swapon /home/swapfile
swapon -aCreate a backup of the original "fstab" file and add the new swap file:
cp /etc/fstab /etc/fstab.backup_`date +%N`
echo '/home/swapfile swap swap defaults 0 0' >> /etc/fstabExit from root and verify the new swap space:
exit
swapon -s
Filename Type Size Used Priority
/dev/sda5 partition 2095100 0 -1
/home/swapfile file 1048572 0 -2Swap space is not a substitute for installed RAM. Swap space is a safeguard that allows the system to move idle processes to disk before the OOM killer will begin to terminate processes in order to free up enough real memory to keep the system operational. The general rule for sizing the swap space depends on the size of installed RAM. If your system has less then 4 GB of RAM the swap space should usually be at least twice this size. If you have more than 8 GB of RAM installed you may consider to use an equal size as swap space. The more RAM you have installed, the less likely you are going to run into memory starvation, and the less likely you are going to need swap space, unless you have a bad process.
h2. 5) Modify Kernel Parameters
Oracle 11gR2 Express Edition requires the following Kernel parameters. Enter the commands exactly as shown:
Login as root:
sudo su -Cut & paste the following directly into a command shell (not a text editor):
cat > /etc/sysctl.d/60-oracle.conf <<-EOF
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65500
kernel.sem=250 32000 100 128
# kernel.shmmax=429496729
kernel.shmmax=107374183
EOFLoad and verify the new kernel parameters:
service procps start
sudo sysctl -q fs.file-max
sudo sysctl -q kernel.shmmax
sudo sysctl -q net.ipv4.ip_local_port_range
sudo sysctl -q kernel.sem The SHMMAX kernel parameter defines the upper memory limit of a process. It is a safeguard to stop a bad process from using all memory and causing RAM starvation. The Linux default is 32 MB. The official Oracle XE installation documentation suggests a value of 4 GB -1 bytes (429496729). Since Oracle 11g XE has a 1 GB memory limit, a smaller footprint will be a better safeguard for the complete system. Setting the SHMMAX parameter to 107374183 will be sufficient.
h2. 6) Oracle Home Directory
At the time of this writing, Enterprise Linux 6 is not supported for Oracle database yet. It is therefore not possible to confirm Oracle ext4 filesystem compatibility, which is default in Ubuntu 11. According to various information, ext4 may cause a performance problem for Oracle 11g database. The following will show you how to add a ext3 partition to your existing setup.
h3. 6.a) Resize the Root Partition
Provided you have sufficient free disk space, you should be able to resize the root partition to create an extra ext3 filesystem. Considering the 11 GB user datafile limit of the Express Edition, 18 GB should be more than enough.
You can use the free Gparted Live CD to shrink your startup volume. Gparted downloads are available at http://sourceforge.net/projects/gparted/files/gparted-live-stable. When burning the CD, pay attention to burn the raw .iso image and not the possibly "mounted" image. If you are using a virtual machine like Oracle Virtualbox, you can mount the .iso image directly. There are going to be a few prompts when the system starts from the CD, but you can press Return to accept the defaults.
When the Gparted window appears:
- Select your ext4 root partition, usually /dev/sda1
- Select the "Resize/Move" button from the toolbar.
- Enter 18000 into the "Free space following" field and press the Return key.
Be careful not not change the start of the partition!
- Click the "Resize/Move" of the dialog and then then the "Apply" toolbar button.
The process may take several minutes - do not abandon it!
- Select the new unallocated free space of ~ 18 GB and push the "New" button.
- Set the file system to "ext3" and label it "oraclexe" and click the "Add" button.
Be sure to label it oraclexe, otherwise the follow-up instructions will fail.
- Finally select "Apply from the toolbar to apply the changes.
- Quit "Gparted", select "Exit" from the desktop and choose "Reboot" to restart the system.
{code}
After the system has restarted, open a terminal command shell.
Login as root:
{code}
sudo su -
{code}
Backup "fstab" and add the UUID of the partition. The "tr" command remove the quotes:
{code}
cp /etc/fstab /etc/fstab_`date +%N`
uuid=`blkid | grep oraclexe | awk '{print $3}'`
uuid=`echo $uuid | tr -d '\042'`
echo $uuid
echo "$uuid /u01 ext3 errors=remount-ro 0 1" >> /etc/fstab
{code}
The UUID is a unique number and should look similar to:
{code}
UUID=d1db753e-b5dd-4a4c-a61e-259c69867b58
{code}
Restart the system:
{code}
reboot
{code}
Verify the success:
{code}
df -h /u01
{code}
h3. 6.b) Setup External Storage
If you prefer to setup an external drive to install Oracle XE, beware that it can be a fatal mistake to make an entry in /etc/fstab to automount your external storage device. An unavailable device in /etc/fstab will prevent a system startup and prompt for appropriate actions at the console.
The following is an example of how to prepare an external storage device to be used for Oracle 11g, including a script to automatically mount an external drive at system startup without the disadvantages of /etc/fstab. The script will also take into consideration that a device name might shift if you attach additional devices.
To find out which USB devices are connected:
{code}
sudo parted -l
{code}
Look for the device that matches your USB storage. For example: /dev/sdb1
{code}
Model: USB 2.0 Flash Disk (scsi)
Disk /dev/sdb: 2064MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 20.5kB 1929MB 1929MB hfs+ mystick
{code}
Initialize the device using ext3 filesystem - this will erase all data. The "-c" option will check for bad blocks (read-only), "-L" is the volume label:
{code}
sudo umount /dev/sdb1
sudo mkfs.ext3 -c -L oraclexe /dev/sdb1
{code}
Install the pmount distribution package:
{code}
sudo apt-get install pmount
{code}
Login as root:
{code}
sudo su -
{code}
Cut & paste the following into the command prompt (not a text editor):
{code}
cat > /etc/init.d/oracle-mount <<-EOF
#! /bin/sh
# /etc/init.d/oracle-mount
VOL_UUID=alphanumeric
VOL_LABEL=oraclexe
VOL_SYMLINK=/u01
mount=/usr/bin/pmount
uuid2dev() {
VOL_DEVICE="\`blkid | grep \$VOL_UUID | awk '{print \$1}'\`"
VOL_DEVICE="\`echo \$VOL_DEVICE | tr -d ':'\`"
echo \$VOL_DEVICE
case "\$1" in
start)
echo "Starting script /etc/init.d/oracle-mount"
uuid2dev
\$mount \$VOL_DEVICE \$VOL_LABEL
if [ -d /media/\$VOL_LABEL ]; then
echo "Mount \$VOL_DEVICE success"
ln -sf /media/\$VOL_LABEL \$VOL_SYMLINK
else
echo "Error mouting \$VOL_DEVICE"
fi
stop)
echo "Stopping script /etc/init.d/oracle-mount"
uuid2dev
/bin/umount \$VOL_DEVICE 2>/dev/null
if [ "\`/usr/bin/pmount | /bin/grep \$VOL_DEVICE\`" ]; then
echo "Error unmounting \$VOL_DEVICE"
else
rm -f \$VOL_SYMLINK
fi
echo "Usage: /etc/init.d/oracle-u01 {start|stop}"
exit 1
esac
### BEGIN INIT INFO
# Provides: oracle-mount
# Required-Start: \$remote_fs \$syslog
# Required-Stop: \$remote_fs \$syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start daemon at boot time
# Description: Mount hotplug-usb drive and create symlink
### END INIT INFO
EOF
{code}
Install the oracle-mount init script:
{code}
chmod 755 /etc/init.d/oracle-mount
update-rc.d oracle-mount defaults 01 99
{code}
Get the UUID of the volume "oraclexe" and update the VOL_UUID in the init script accordingly:
{code}
uuid=`blkid | grep oraclexe | awk '{print $3}'`
echo $uuid
sed -i "s/^VOL_UUID=.*/VOL_$uuid/g" /etc/init.d/oracle-mount
{code}
The UUID of your device will be a unique number, but should be similar to:
{code}
UUID="3f5e9963-b328-49f3-b3e8-a3561ae34106"
{code}
Logout of root and test the init script:
{code}
exit
sudo /etc/init.d/oracle-mount stop
ls /u01
sudo /etc/init.d/oracle-mount start
ls /u01
{code}
Your output should look like:
{code}
Stopping script /etc/init.d/oracle-mount
/dev/sdb1
ls: cannot access /u01: No such file or directory
Starting script /etc/init.d/oracle-mount
/dev/sdb1
Mount /dev/sdb1 success
lost+found
{code}
h2. 7) ORA-00845: MEMORY_TARGET
Oracle 11gR2 XE under Ubuntu 11.10 will result in "ORA-00845: MEMORY_TARGET not support on this system" either at Oracle database startup or during the initial installation. Ubuntu 11.10 uses a new version of the "systemd" system and session manager and has migrated away from /dev/shm and other common directories in favor of /run.
There are several ways how to address the problem. You can either enable /dev/shm shared memory, or change the default memory management of Oracle 11g from AMM (Automatic Memory Management) to ASMM (Automatic Shared Memory Management) as it was in used the previous 10g version. Since AMM is one of the new features of 11g, the following will show you how to make to make AMM work.
Login as root:
{code}
sudo su -
{code}
Cut & paste the following into the command prompt (not a text editor):
{code}
cat > /etc/init.d/oracle-shm <<-EOF
#! /bin/sh
# /etc/init.d/oracle-shm
case "\$1" in
start)
echo "Starting script /etc/init.d/oracle-shm"
# Run only once at system startup
if [ -e /dev/shm/.oracle-shm ]; then
echo "/dev/shm is already mounted, nothing to do"
else
rm -f /dev/shm
mkdir /dev/shm
mount -B /run/shm /dev/shm
touch /dev/shm/.oracle-shm
fi
stop)
echo "Stopping script /etc/init.d/oracle-shm"
echo "Nothing to do"
echo "Usage: /etc/init.d/oracle-shm {start|stop}"
exit 1
esac
### BEGIN INIT INFO
# Provides: oracle-shm
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Bind /run/shm to /dev/shm at system startup.
# Description: Fix to allow Oracle 11g use AMM.
### END INIT INFO
EOF
{code}
Install the oracle-shm init script:
{code}
chmod 755 /etc/init.d/oracle-shm
update-rc.d oracle-shm defaults 01 99
{code}
Restart the system:
{code}
reboot
{code}
Verify the success:
{code}
sudo cat /etc/mtab | grep shm
{code}
{code}
none /run/shm tmpfs rw,nosuid,nodev 0 0
/run/shm /dev/shm none rw,bind 0 0
{code}
The upper limit of shared memory under Linux is set to 50 % of the installed RAM by default. If your system has less than 2 GB of RAM installed, there is still a chance to run into ORA-00845 error if your shared memory is used by other software.
The verify available shared memory, type the following commands:
{code}
sudo df -h /run/shm
{code}
h2. 8) Installing Oracle 11gR2 Express Edition
The final release version of Oracle 11gR2 Express Edition can be downloaded for free at http://otn.oracle.com/database/express-edition/downloads. The software should automatically downloaded into the "Downloads" folder of your home directory.
Enter the following commands to unpack the installer:
{code}
cd ~/Downloads
unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip
rm oracle-xe-11.2.0-1.0.x86_64.rpm.zip
{code}
The Debian Linux based package management of Ubuntu is not compatible with the Red Hat package manager. The Oracle installer needs to be converted using the following commands:
{code}
cd ~/Downloads/Disk1
sudo alien --to-deb --scripts oracle-xe-11.2.0-1.0.x86_64.rpm
(This may take a few minutes)
rm oracle-xe-11.2.0-1.0.x86_64.rpm
{code}
The following needs to be set for compatibility:
{code}
sudo ln -s /usr/bin/awk /bin/awk
sudo mkdir /var/lock/subsys
{code}
Ubuntu uses different tools to manage services and system startup scripts. The "chkconfig" tool required by the Oracle installer is not available in Ubuntu. The following will create a file to simulate the "chkconfig" tool.
Login as root:
{code}
sudo su -
{code}
Copy & paste the following *directly* into the command prompt to create a file:
{code}
cat > /sbin/chkconfig <<-EOF
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian based Linux (by dude)
# Only run once.
echo "Simulating /sbin/chkconfig..."
if [[ ! \`tail -n1 /etc/init.d/oracle-xe | grep INIT\` ]]; then
cat >> /etc/init.d/oracle-xe <<-EOM
### BEGIN INIT INFO
# Provides: OracleXE
# Required-Start: \\\$remote_fs \\\$syslog
# Required-Stop: \\\$remote_fs \\\$syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Oracle 11g Express Edition
### END INIT INFO
EOM
fi
update-rc.d oracle-xe defaults 80 01
EOF
{code}
Exit root:
{code}
exit
{code}
Set execute privileges:
{code}
sudo chmod 755 /sbin/chkconfig
{code}
Install Oracle 11gR2 Express Edition entering the following commands:
{code}
cd ~/Downloads/Disk1
sudo dpkg --install ./oracle-xe_11.2.0-2_amd64.deb
(This may take a couple of minutes)
{code}
Run the configuration script to create (clone) the database and follow the screen. Accept the default answers, including "y" to startup the database automatically, or modify as required.
{code}
sudo /etc/init.d/oracle-xe configure
(This can take a few minutes - the installation completed successfully.)
{code}
To verify success, the procedure should end showing:
{code}
Starting Oracle Net Listener...Done
Configuring database...Done
Starting Oracle Database 11g Express Edition instance...Done
Installation completed successfully.
{code}
Set a password for the Oracle account:
{code}
sudo passwd oracle
{code}
h2. 9) Post-Installation
In order to use sqlplus and other tools, the Oracle account requires specific environment variables. The following will set these variables automatically at every Oracle login:
Login as the Oracle user:
{code}
su - oracle
{code}
Copy the default account skeleton files and add the Oracle env script to .profile:
{code}
cp /etc/skel/.bash_logout ./
cp /etc/skel/.bashrc ./
cp /etc/skel/.profile ./
echo "" >>./.profile
echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >>./.profile
{code}
By default, the Oracle Database XE graphical user interface is only available at the local server, but not remotely. The following will enable remote logins:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and execute the following:
{code}
sqlplus / as sysdba
SQL> EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exit
{code}
See http://download.oracle.com/docs/cd/E17781_01/admin.112/e18585/toc.htm for more information.
h3. a) Unity desktop configurations
The Oracle XE menu under the previous Gnome Classic desktop shows several useful scripts to backup the database, start and stop the database, etc. Under the Unity based desktop this menu is not available. You can either switch to the Gnome Classic desktop as outlined in chapter 2, or perform the following steps to modify and copy the scripts as outlined below. The start and stop database scripts will also be modified to perform a progress feedback.
Login as user root:
{code}
sudo su -
{code}
Convert desktop files:
{code}
cd /usr/share/applications
sed -i 's/Categories.*/Categories=Database;Office;Development;/g' oraclexe*
sed -i 's/MultipleArgs/X-MultipleArgs/g' oraclexe*
sed -i 's/MimeType.*/MimeType=application\/x-database/g' oraclexe*
sed -i 's/.png//g' oraclexe*
sed -i 's/Terminal=false/Terminal=true/g' oraclexe-startdb.desktop
sed -i 's/Terminal=false/Terminal=true/g' oraclexe-stopdb.desktop
{code}
Exit root:
{code}
exit
{code}
Login as user Oracle:
{code}
su - oracle
{code}
Modify database start and stop scripts:
{code}
cd /u01/app/oracle/product/11.2.0/xe/config/scripts
cp startdb.sh start.sh_orig
cp stopdb.sh stopdb.sh_orig
sed -i 's/>.*//g' startdb.sh
sed -i 's/>.*//g' stopdb.sh
{code}
You will need SYSDBA privileges and set Oracle environment variables in order to use your regular user account.
Login to your regular user account:
{code}
su - dude
{code}
Enter the folowing command:
{code}
sudo usermod -a -G dba dude
{code}
Then update your profile to automatically set the necessary Oracle environment variables:
{code}
echo "" >>./.profile
echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >>./.profile
{code}
Update your Desktop folder to contain useful Oracle XE scripts:
{code}
cp /usr/share/applications/oraclexe* ~/Desktop
chmod 750 ~/Desktop/oraclexe*
{code}
To verify success re-login and try "sqlplus":
{code}
su - oracle
sqlplus / as sysdba
{code}
h2. 10) Tips and Troubleshooting
h3. 10. a) Port 1521 appears to be in use by another application
Error: Port 1521 appears to be in use by another application. Specify a different port.This error happens after a previously unsuccessful configuration attempt using /etc/init.d/oracle-xe configure script. The script was able to start the Listener process, but most likely failed to continue to clone the database, e.g. ORA-00845. The following should correct the problem:
Determine the oracle listener process that is already running:
{code}
$ ps -ef | grep oracle
{code}
Your output should be similar to:
{code}
oracle 19789 1 0 19:46 ? 00:00:00 /u01/app/oracle/product/11.2.0/xe/bin/tnslsnr
{code}
Then kill the process, using the appropriate process id, for instance:
{code}
$ sudo kill -9 19789
{code}
h3. 10.b) cannot touch `/var/lock/subsys/listener': No such file or directory
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directoryThis error occurs when you run /etc/init.d/oracle-xe configure, but failed the preinstallation step to create the /var//lock/subsys directory as outlined in chapter 8.
h3. 10.c) ORA-00845: MEMORY_TARGET
ORA-00845: MEMORY_TARGET not supported on this system See chapter 7 to enable /dev/shm and verify free space available in /run/shm
h3. 10.d) Apex ADMIN password
According to the Oracle documentation, the password for the INTERNAL and ADMIN Oracle Application Express user accounts is initially the same as the SYS and SYSTEM administrative user accounts. Well, I tried several times without success. To reset the Apex Admin password:
Login as user oracle:
{code}
su - oracle
{code}
Login as SYSDBA and type the following:
{code}
sqlplus / as sysdba
{code}
At the SQL prompt, type the following to be prompted to change the password:
{code}
SQL> @?/apex/apxxepwd.sql
exit
{code}
When done, open your browser and go to http://127.0.0.1:8080/apex
Workspace: Internal
Username: ADMIN
Password: password you set with apxxepwd.sql
I will prompt you to reset the password:
old password: password you set with apxxepwd.sql
new password: final_password
You can also login as the Apex Admin using http://127.0.0.1:8080/apex/apex_admin
h3. 10.e) SYS and SYSTEM password
Use the following commands to reset the SYS and SYSTEM passwords if necessary:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and type the following at the SQL prompt:
{code}
sqlplus / as sysdba
SQL> alter user sys identified by "password" account unlock;
SQL> alter user system identified by "password" account unlock;
SQL> exit
{code}
h3. 10.f) Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Open a terminal seesion and login as user root:
{code}
sudo su -
{code}
Enter the following:
{code}
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe remove
update-rc.d -f oracle-mount remove
update-rc.d -f oracle-shm remove
{code}
h3. 10.g) Reconfigure Oracle 11g XE
Type the following commands in a terminal window:
{code}
sudo /etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
sudo /etc/init.d/oracle-xe configure
{code}
h3. 10.h) Gnome Classic desktop
Ubuntu 11 moved from the Gnome Classic desktop to Unity and removed the "Ubuntu Classic" login option. Unity was designed to make more efficient use of space given a limited screen size and touch screens. If you prefer to use the Gnome Classic desktop, enter the following into a terminal window:
{code}
sudo apt-get install gnome-panel
{code}
To log into the Gnome Classic desktop, select the "Gearwheel" at the login screen and select "Gnome Classic".
h3. 10.i) Unix vi cursor keys
The instructions in this tutorial do not require the use of any text editor. However, if you would like use the backspace and cursor keys in the "vi-editor", the following needs to be installed:
{code}
sudo apt-get install vim
{code}
h3. 10.j) Backup Database
In order to perform an online database backup using the supplied "Backup Database" script, the database needs to run in Archive-Log mode. This can be setup using the following commands:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and type the following:
{code}
sqlplus / as sysdba
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog;
SQL> alter database open;
SQL> exit
{code}
h2. 11) History
Version: A, 24-Oct-2011
- first release
Version: B, 25-Oct-2011
- reduced instructions.
- corrected errors in 6a and 8.
- new strategy addressing ORA-00845 error.
- rework of chapter 10.
Version: C, 30-Nov-2011
- corrected typo in 6a
- new procedures in 9a.
- added progress feedback to database scripts.
Version D, 14-Jan-2012
- corrected presentation errors.
- reorganized instructions.
h3. 12) References
http://download.oracle.com/docs/cd/E17781_01/install.112/e18802/toc.htm
http://askubuntu.com/questions/57297/why-has-var-run-been-migrated-to-run
http://lwn.net/Articles/436012/
https://forums.oracle.com/forums/thread.jspa?threadID=2300750&tstart=0
Kind regards and best of luck!
Dude.Excellent Blog. Thank You
Small clarification on Step **6) Oracle Home Directory, ...a) Resize the Root Partition**
Ubuntu 11.10 has Gparted available as a Ubuntu software download, DONT use that while trying the above step, instead download the ISO file from http://sourceforge.net/projects/gparted/files/gparted-live-stable/ gparted-live-0.12.0-5.iso (124.6 MB)
Burn that ISO file on a Blank DVD, reboot the Ubuntu , during startup select Boot from DVD Option if not already selected. this will take to Boot Menu Options of Gparted Live then select the first menu option, and this allows to do further action such as Re-sizing .
and once you have chosen and executed step a) . do NOT run step b) also that is "Setup External Storage"
I hope this minor clarification can avoid some confusion
Regards
Madhusudhan Rao
Edited by: MadhusudhanRao on Mar 24, 2012 11:30 PM -
Connection Failed in OBIEE 11g Admin tool
Hi,
I have virtual image V305 of OBIEE on linux x86-64. It is working fine but I was not able to access Admintool from linux m/c.
So I have installed OBIEE 11g client on windows XP. It is showing all the subject area & tables. But when I am importing any table from my DB, it is giving error "Connection has failed". I have done tnsname.Ora file in both folder Oracle client & OBIEE client
Please help me as soon as possible.
ThanksI've found a work around for using tnsnames:
put the following string in "Data Source" and it works
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = <your host>)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = <your database>)))
Can you please refer below links for more methods.
https://forums.oracle.com/thread/2315030
http://satyaobieesolutions.blogspot.com/2013/10/obiee11g-connection-failed-error-import.html
http://allaboutobiee.blogspot.com/2012/03/connecting-oracle-data-source-with.html
http://www.rittmanmead.com/2012/05/obiee-administration-tool-import-metadata-shows-no-schemas/
Thanks,
Satya Ranki Reddy -
ORA-12545: Connect failed because target host or object does not exist
Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
RobertHi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun -
[SOLVED] Wireless connection fails after upgrade to dhcpcd 6.2.1
After upgrade of dhcpcd 6.1.0 to 6.2.1 three days ago (pacman -Syu) my wireless connection fails: deauthenticating from ... by local choice (reason=3)
# uname -a
Linux localhost 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Linux
# dhcpcd --version
dhcpcd 6.2.1
Copyright (c) 2006-2014 Roy Marples
# dmesg
[ 132.809506] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 133.863692] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 134.116365] r8169 0000:02:00.0 eth0: link down
[ 134.116479] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 135.030954] wlan0: authenticate with a2:05:44:ff:33:a4
[ 135.041929] wlan0: send auth to a2:05:44:ff:33:a4 (try 1/3)
[ 135.045781] wlan0: authenticated
[ 135.045879] ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 135.046559] wlan0: associate with a2:05:44:ff:33:a4 (try 1/3)
[ 135.049960] wlan0: RX AssocResp from a2:05:44:ff:33:a4 (capab=0x431 status=0 aid=4)
[ 135.050609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 135.051337] wlan0: associated
[ 169.302610] wlan0: deauthenticating from a2:05:44:ff:33:a4 by local choice (reason=3)
[ 169.339662] cfg80211: Calling CRDA to update world regulatory domain
[ 169.396876] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 169.715612] r8169 0000:02:00.0 eth0: link down
[ 169.715702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Downgrade to dhcpcd 6.1.0 heals the problem.
# dhcpcd --version
dhcpcd 6.1.0
Copyright (c) 2006-2013 Roy Marples
In case it is related to ath9k:
# modinfo ath9k
filename:
/lib/modules/3.12.9-2-ARCH/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko.gz
I couldn't find a bug report on neither dhcpcd nor ath9k.
Any idea what I can do to follow up on this?
Last edited by nocreativity (2014-02-23 08:03:11)Here is an extract from journalctl (syslogs are empty):
Feb 15 17:43:11 localhost dhcpcd[3068]: wlan0: soliciting a DHCP lease
Feb 15 17:43:11 localhost dhcpcd[3068]: wlan0: IAID ca:59:49:5b
Feb 15 17:43:11 localhost dhcpcd[3068]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:43:11 localhost dhcpcd[3068]: version 6.2.1 starting
Feb 15 17:43:10 localhost kernel: wlan0: associated
Feb 15 17:43:10 localhost kernel: wlan0: RX AssocResp from 00:1a:4f:8d:06:3b (capab=0x451 status=0 aid=2)
Feb 15 17:43:10 localhost kernel: wlan0: associate with 00:1a:4f:8d:06:3b (try 1/3)
Feb 15 17:43:10 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Feb 15 17:43:10 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Feb 15 17:43:10 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:43:10 localhost kernel: wlan0: authenticated
Feb 15 17:43:10 localhost kernel: wlan0: send auth to 00:1a:4f:8d:06:3b (try 1/3)
Feb 15 17:43:10 localhost kernel: wlan0: authenticate with 00:1a:4f:8d:06:3b
Feb 15 17:43:08 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:43:08 localhost dhcpcd[3050]: dhcpcd not running
Feb 15 17:43:08 localhost wicd[224]: dhcpcd[3050]: dhcpcd not running
Feb 15 17:43:08 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:43:08 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:43:08 localhost dhcpcd[3042]: dhcpcd not running
Feb 15 17:43:08 localhost wicd[224]: dhcpcd[3042]: dhcpcd not running
Feb 15 17:43:08 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:43:08 localhost dhcpcd[3036]: dhcpcd not running
Feb 15 17:43:08 localhost wicd[224]: Throttling dhcpcd[3036]: dhcpcd not running
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:41:16 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:40:22 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:40:22 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:40:21 localhost dhcpcd[2941]: dhcpcd not running
Feb 15 17:40:21 localhost wicd[224]: dhcpcd[2941]: dhcpcd not running
Feb 15 17:40:21 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:40:21 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:40:21 localhost dhcpcd[2934]: dhcpcd not running
Feb 15 17:40:21 localhost wicd[224]: dhcpcd[2934]: dhcpcd not running
Feb 15 17:40:18 localhost dhcpcd[2915]: exited
Feb 15 17:40:18 localhost dhcpcd[2915]: timed out
Feb 15 17:39:48 localhost dhcpcd[2915]: wlan0: soliciting a DHCP lease
Feb 15 17:39:48 localhost dhcpcd[2915]: wlan0: IAID ca:59:49:5b
Feb 15 17:39:48 localhost dhcpcd[2915]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:39:48 localhost dhcpcd[2915]: version 6.2.1 starting
Feb 15 17:39:47 localhost kernel: wlan0: associated
Feb 15 17:39:47 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=5)
Feb 15 17:39:47 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:39:47 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:39:47 localhost kernel: wlan0: authenticated
Feb 15 17:39:47 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:39:47 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:39:45 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:39:45 localhost dhcpcd[2897]: dhcpcd not running
Feb 15 17:39:45 localhost wicd[224]: dhcpcd[2897]: dhcpcd not running
Feb 15 17:39:45 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:39:45 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:39:45 localhost dhcpcd[2889]: dhcpcd not running
Feb 15 17:39:45 localhost wicd[224]: dhcpcd[2889]: dhcpcd not running
Feb 15 17:39:45 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:39:45 localhost dhcpcd[2883]: dhcpcd not running
Feb 15 17:39:45 localhost wicd[224]: dhcpcd[2883]: dhcpcd not running
Feb 15 17:36:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:36:59 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:36:58 localhost dhcpcd[2773]: dhcpcd not running
Feb 15 17:36:58 localhost wicd[224]: dhcpcd[2773]: dhcpcd not running
Feb 15 17:36:58 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:36:58 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:36:58 localhost dhcpcd[2766]: dhcpcd not running
Feb 15 17:36:58 localhost wicd[224]: dhcpcd[2766]: dhcpcd not running
Feb 15 17:36:56 localhost dhcpcd[2750]: exited
Feb 15 17:36:56 localhost dhcpcd[2750]: timed out
Feb 15 17:36:26 localhost dhcpcd[2750]: wlan0: soliciting a DHCP lease
Feb 15 17:36:26 localhost dhcpcd[2750]: wlan0: IAID ca:59:49:5b
Feb 15 17:36:26 localhost dhcpcd[2750]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:36:25 localhost dhcpcd[2750]: version 6.2.1 starting
Feb 15 17:36:24 localhost kernel: wlan0: associated
Feb 15 17:36:24 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=4)
Feb 15 17:36:24 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:36:24 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:36:24 localhost kernel: wlan0: authenticated
Feb 15 17:36:24 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:36:24 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:36:22 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:36:22 localhost dhcpcd[2730]: dhcpcd not running
Feb 15 17:36:22 localhost wicd[224]: dhcpcd[2730]: dhcpcd not running
Feb 15 17:36:22 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:36:22 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:36:22 localhost dhcpcd[2722]: dhcpcd not running
Feb 15 17:36:22 localhost wicd[224]: dhcpcd[2722]: dhcpcd not running
Feb 15 17:36:22 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:36:22 localhost dhcpcd[2716]: dhcpcd not running
Feb 15 17:36:22 localhost wicd[224]: dhcpcd[2716]: dhcpcd not running
Feb 15 17:35:09 localhost kernel: usb 3-1: dtv_property_legacy_params_sync: doesn't know how to handle a DVBv3 call to delivery system 0
Feb 15 17:33:49 localhost kernel: usb 3-1: dtv_property_legacy_params_sync: doesn't know how to handle a DVBv3 call to delivery system 0
Feb 15 17:33:36 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:33:36 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:33:36 localhost dhcpcd[2625]: dhcpcd not running
Feb 15 17:33:36 localhost wicd[224]: dhcpcd[2625]: dhcpcd not running
Feb 15 17:33:35 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:33:35 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:33:35 localhost dhcpcd[2617]: dhcpcd not running
Feb 15 17:33:35 localhost wicd[224]: dhcpcd[2617]: dhcpcd not running
Feb 15 17:33:32 localhost dhcpcd[2602]: exited
Feb 15 17:33:32 localhost dhcpcd[2602]: timed out
Feb 15 17:33:02 localhost dhcpcd[2602]: wlan0: soliciting a DHCP lease
Feb 15 17:33:02 localhost dhcpcd[2602]: wlan0: IAID ca:59:49:5b
Feb 15 17:33:02 localhost dhcpcd[2602]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:33:02 localhost dhcpcd[2602]: version 6.2.1 starting
Feb 15 17:33:01 localhost kernel: wlan0: associated
Feb 15 17:33:01 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:33:01 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:33:01 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:33:01 localhost kernel: wlan0: authenticated
Feb 15 17:33:01 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:33:01 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:32:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:32:59 localhost dhcpcd[2583]: dhcpcd not running
Feb 15 17:32:59 localhost wicd[224]: dhcpcd[2583]: dhcpcd not running
Feb 15 17:32:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:32:59 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:32:59 localhost dhcpcd[2575]: dhcpcd not running
Feb 15 17:32:59 localhost wicd[224]: dhcpcd[2575]: dhcpcd not running
Feb 15 17:32:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:32:59 localhost dhcpcd[2569]: dhcpcd not running
Feb 15 17:32:59 localhost wicd[224]: dhcpcd[2569]: dhcpcd not running
Feb 15 17:30:13 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:30:13 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:30:12 localhost dhcpcd[2489]: dhcpcd not running
Feb 15 17:30:12 localhost wicd[224]: dhcpcd[2489]: dhcpcd not running
Feb 15 17:30:12 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:30:12 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:30:12 localhost dhcpcd[2481]: dhcpcd not running
Feb 15 17:30:12 localhost wicd[224]: dhcpcd[2481]: dhcpcd not running
Feb 15 17:30:09 localhost dhcpcd[2447]: exited
Feb 15 17:30:09 localhost dhcpcd[2447]: timed out
Feb 15 17:29:39 localhost dhcpcd[2447]: wlan0: soliciting a DHCP lease
Feb 15 17:29:39 localhost dhcpcd[2447]: wlan0: IAID ca:59:49:5b
Feb 15 17:29:39 localhost dhcpcd[2447]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:29:39 localhost dhcpcd[2447]: version 6.2.1 starting
Feb 15 17:29:38 localhost kernel: wlan0: associated
Feb 15 17:29:38 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:29:38 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:29:38 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:29:38 localhost kernel: wlan0: authenticated
Feb 15 17:29:38 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:29:38 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:29:36 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:29:36 localhost dhcpcd[2429]: dhcpcd not running
Feb 15 17:29:36 localhost wicd[224]: dhcpcd[2429]: dhcpcd not running
Feb 15 17:29:36 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:29:36 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:29:36 localhost dhcpcd[2421]: dhcpcd not running
Feb 15 17:29:36 localhost wicd[224]: dhcpcd[2421]: dhcpcd not running
Feb 15 17:29:36 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:29:36 localhost dhcpcd[2415]: dhcpcd not running
Feb 15 17:29:36 localhost wicd[224]: dhcpcd[2415]: dhcpcd not running
Feb 15 17:26:50 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:26:50 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:26:49 localhost dhcpcd[2323]: dhcpcd not running
Feb 15 17:26:49 localhost wicd[224]: dhcpcd[2323]: dhcpcd not running
Feb 15 17:26:49 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:26:49 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:26:49 localhost dhcpcd[2316]: dhcpcd not running
Feb 15 17:26:49 localhost wicd[224]: dhcpcd[2316]: dhcpcd not running
Feb 15 17:26:46 localhost dhcpcd[2288]: exited
Feb 15 17:26:46 localhost dhcpcd[2288]: timed out
Feb 15 17:26:16 localhost dhcpcd[2288]: wlan0: soliciting a DHCP lease
Feb 15 17:26:16 localhost dhcpcd[2288]: wlan0: IAID ca:59:49:5b
Feb 15 17:26:16 localhost dhcpcd[2288]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:26:16 localhost dhcpcd[2288]: version 6.2.1 starting
Feb 15 17:26:15 localhost kernel: wlan0: associated
Feb 15 17:26:15 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:26:15 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:26:15 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:26:15 localhost kernel: wlan0: authenticated
Feb 15 17:26:15 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:26:15 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:26:13 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:26:13 localhost dhcpcd[2269]: dhcpcd not running
Feb 15 17:26:13 localhost wicd[224]: dhcpcd[2269]: dhcpcd not running
Feb 15 17:26:13 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:26:13 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:26:13 localhost dhcpcd[2261]: dhcpcd not running
Feb 15 17:26:13 localhost wicd[224]: dhcpcd[2261]: dhcpcd not running
Feb 15 17:26:13 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:26:13 localhost dhcpcd[2255]: dhcpcd not running
Feb 15 17:26:13 localhost wicd[224]: dhcpcd[2255]: dhcpcd not running
Feb 15 17:25:07 localhost kernel: usb 3-1: dtv_property_legacy_params_sync: doesn't know how to handle a DVBv3 call to delivery system 0
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Throttling autoreconnect
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:25:06 localhost wicd[224]: Starting automatic reconnect process
Feb 15 17:23:27 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:23:27 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:23:26 localhost dhcpcd[2174]: dhcpcd not running
Feb 15 17:23:26 localhost wicd[224]: dhcpcd[2174]: dhcpcd not running
Feb 15 17:23:26 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:23:26 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:23:26 localhost dhcpcd[2166]: dhcpcd not running
Feb 15 17:23:26 localhost wicd[224]: dhcpcd[2166]: dhcpcd not running
Feb 15 17:23:23 localhost dhcpcd[2151]: exited
Feb 15 17:23:23 localhost dhcpcd[2151]: timed out
Feb 15 17:22:53 localhost dhcpcd[2151]: wlan0: soliciting a DHCP lease
Feb 15 17:22:53 localhost dhcpcd[2151]: wlan0: IAID ca:59:49:5b
Feb 15 17:22:53 localhost dhcpcd[2151]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:22:53 localhost dhcpcd[2151]: version 6.2.1 starting
Feb 15 17:22:52 localhost kernel: wlan0: associated
Feb 15 17:22:52 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:22:52 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:22:52 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:22:52 localhost kernel: wlan0: authenticated
Feb 15 17:22:52 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:22:52 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:22:50 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:22:50 localhost dhcpcd[2132]: dhcpcd not running
Feb 15 17:22:50 localhost wicd[224]: dhcpcd[2132]: dhcpcd not running
Feb 15 17:22:50 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:22:50 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:22:50 localhost dhcpcd[2124]: dhcpcd not running
Feb 15 17:22:50 localhost wicd[224]: dhcpcd[2124]: dhcpcd not running
Feb 15 17:22:50 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:22:50 localhost dhcpcd[2118]: dhcpcd not running
Feb 15 17:22:50 localhost wicd[224]: dhcpcd[2118]: dhcpcd not running
Feb 15 17:20:04 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:20:04 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:20:03 localhost dhcpcd[2028]: dhcpcd not running
Feb 15 17:20:03 localhost wicd[224]: dhcpcd[2028]: dhcpcd not running
Feb 15 17:20:03 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:20:03 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:20:03 localhost dhcpcd[2020]: dhcpcd not running
Feb 15 17:20:03 localhost wicd[224]: dhcpcd[2020]: dhcpcd not running
Feb 15 17:20:00 localhost dhcpcd[2003]: exited
Feb 15 17:20:00 localhost dhcpcd[2003]: timed out
Feb 15 17:19:30 localhost dhcpcd[2003]: wlan0: soliciting a DHCP lease
Feb 15 17:19:30 localhost dhcpcd[2003]: wlan0: IAID ca:59:49:5b
Feb 15 17:19:30 localhost dhcpcd[2003]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:19:30 localhost dhcpcd[2003]: version 6.2.1 starting
Feb 15 17:19:29 localhost kernel: wlan0: associated
Feb 15 17:19:29 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:19:29 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:19:29 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:19:29 localhost kernel: wlan0: authenticated
Feb 15 17:19:29 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:19:29 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:19:27 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:19:27 localhost dhcpcd[1985]: dhcpcd not running
Feb 15 17:19:27 localhost wicd[224]: dhcpcd[1985]: dhcpcd not running
Feb 15 17:19:27 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:19:27 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:19:27 localhost dhcpcd[1977]: dhcpcd not running
Feb 15 17:19:27 localhost wicd[224]: dhcpcd[1977]: dhcpcd not running
Feb 15 17:19:27 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:19:27 localhost dhcpcd[1971]: dhcpcd not running
Feb 15 17:19:27 localhost wicd[224]: dhcpcd[1971]: dhcpcd not running
Feb 15 17:16:41 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:16:41 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:16:40 localhost dhcpcd[1871]: dhcpcd not running
Feb 15 17:16:40 localhost wicd[224]: dhcpcd[1871]: dhcpcd not running
Feb 15 17:16:40 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:16:40 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:16:40 localhost dhcpcd[1863]: dhcpcd not running
Feb 15 17:16:40 localhost wicd[224]: dhcpcd[1863]: dhcpcd not running
Feb 15 17:16:37 localhost dhcpcd[1848]: exited
Feb 15 17:16:37 localhost dhcpcd[1848]: timed out
Feb 15 17:16:07 localhost dhcpcd[1848]: wlan0: soliciting a DHCP lease
Feb 15 17:16:07 localhost dhcpcd[1848]: wlan0: IAID ca:59:49:5b
Feb 15 17:16:07 localhost dhcpcd[1848]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:16:07 localhost dhcpcd[1848]: version 6.2.1 starting
Feb 15 17:16:06 localhost kernel: wlan0: associated
Feb 15 17:16:06 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:16:06 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:16:06 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:16:06 localhost kernel: wlan0: authenticated
Feb 15 17:16:06 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:16:06 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:16:04 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:16:04 localhost dhcpcd[1829]: dhcpcd not running
Feb 15 17:16:04 localhost wicd[224]: dhcpcd[1829]: dhcpcd not running
Feb 15 17:16:04 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:16:04 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:16:04 localhost dhcpcd[1821]: dhcpcd not running
Feb 15 17:16:04 localhost wicd[224]: dhcpcd[1821]: dhcpcd not running
Feb 15 17:16:04 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:16:04 localhost dhcpcd[1815]: dhcpcd not running
Feb 15 17:16:04 localhost wicd[224]: dhcpcd[1815]: dhcpcd not running
Feb 15 17:13:18 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:13:18 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:13:17 localhost dhcpcd[1723]: dhcpcd not running
Feb 15 17:13:17 localhost wicd[224]: dhcpcd[1723]: dhcpcd not running
Feb 15 17:13:17 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:13:17 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:13:17 localhost dhcpcd[1716]: dhcpcd not running
Feb 15 17:13:17 localhost wicd[224]: dhcpcd[1716]: dhcpcd not running
Feb 15 17:13:14 localhost dhcpcd[1697]: exited
Feb 15 17:13:14 localhost dhcpcd[1697]: timed out
Feb 15 17:12:44 localhost dhcpcd[1697]: wlan0: soliciting a DHCP lease
Feb 15 17:12:44 localhost dhcpcd[1697]: wlan0: IAID ca:59:49:5b
Feb 15 17:12:44 localhost dhcpcd[1697]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:12:44 localhost dhcpcd[1697]: version 6.2.1 starting
Feb 15 17:12:43 localhost kernel: wlan0: associated
Feb 15 17:12:43 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:12:43 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:12:43 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:12:43 localhost kernel: wlan0: authenticated
Feb 15 17:12:43 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:12:43 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:12:41 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:12:41 localhost dhcpcd[1679]: dhcpcd not running
Feb 15 17:12:41 localhost wicd[224]: dhcpcd[1679]: dhcpcd not running
Feb 15 17:12:41 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:12:41 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:12:41 localhost dhcpcd[1671]: dhcpcd not running
Feb 15 17:12:41 localhost wicd[224]: dhcpcd[1671]: dhcpcd not running
Feb 15 17:12:41 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:12:41 localhost dhcpcd[1665]: dhcpcd not running
Feb 15 17:12:41 localhost wicd[224]: dhcpcd[1665]: dhcpcd not running
Feb 15 17:09:55 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:09:55 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:09:54 localhost dhcpcd[1567]: dhcpcd not running
Feb 15 17:09:54 localhost wicd[224]: dhcpcd[1567]: dhcpcd not running
Feb 15 17:09:54 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:09:54 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:09:54 localhost dhcpcd[1558]: dhcpcd not running
Feb 15 17:09:54 localhost wicd[224]: dhcpcd[1558]: dhcpcd not running
Feb 15 17:09:51 localhost dhcpcd[1539]: exited
Feb 15 17:09:51 localhost dhcpcd[1539]: timed out
Feb 15 17:09:21 localhost dhcpcd[1539]: wlan0: soliciting a DHCP lease
Feb 15 17:09:21 localhost dhcpcd[1539]: wlan0: IAID ca:59:49:5b
Feb 15 17:09:21 localhost dhcpcd[1539]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:09:21 localhost dhcpcd[1539]: version 6.2.1 starting
Feb 15 17:09:20 localhost kernel: wlan0: associated
Feb 15 17:09:20 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:09:20 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:09:20 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:09:20 localhost kernel: wlan0: authenticated
Feb 15 17:09:20 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:09:20 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:09:19 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:09:19 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:09:19 localhost dhcpcd[1521]: dhcpcd not running
Feb 15 17:09:19 localhost wicd[224]: dhcpcd[1521]: dhcpcd not running
Feb 15 17:09:19 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:09:19 localhost dhcpcd[1515]: dhcpcd not running
Feb 15 17:09:19 localhost wicd[224]: dhcpcd[1515]: dhcpcd not running
Feb 15 17:09:18 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:09:18 localhost dhcpcd[1509]: dhcpcd not running
Feb 15 17:09:18 localhost wicd[224]: dhcpcd[1509]: dhcpcd not running
Feb 15 17:09:18 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:09:18 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:09:17 localhost dhcpcd[1501]: dhcpcd not running
Feb 15 17:09:17 localhost wicd[224]: dhcpcd[1501]: dhcpcd not running
Feb 15 17:09:17 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:09:17 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:09:17 localhost dhcpcd[1494]: dhcpcd not running
Feb 15 17:09:17 localhost wicd[224]: dhcpcd[1494]: dhcpcd not running
Feb 15 17:09:11 localhost dhcpcd[1476]: exited
Feb 15 17:09:11 localhost dhcpcd[1476]: timed out
Feb 15 17:08:41 localhost dhcpcd[1476]: wlan0: soliciting a DHCP lease
Feb 15 17:08:41 localhost dhcpcd[1476]: wlan0: IAID ca:59:49:5b
Feb 15 17:08:41 localhost dhcpcd[1476]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:08:41 localhost dhcpcd[1476]: version 6.2.1 starting
Feb 15 17:08:40 localhost kernel: wlan0: associated
Feb 15 17:08:40 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:08:40 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:08:40 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:08:40 localhost kernel: wlan0: authenticated
Feb 15 17:08:40 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:08:40 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:08:39 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:08:39 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:08:39 localhost dhcpcd[1458]: dhcpcd not running
Feb 15 17:08:39 localhost wicd[224]: dhcpcd[1458]: dhcpcd not running
Feb 15 17:08:39 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:08:39 localhost dhcpcd[1452]: dhcpcd not running
Feb 15 17:08:39 localhost wicd[224]: dhcpcd[1452]: dhcpcd not running
Feb 15 17:08:38 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:08:38 localhost dhcpcd[1446]: dhcpcd not running
Feb 15 17:08:38 localhost wicd[224]: dhcpcd[1446]: dhcpcd not running
Feb 15 17:08:38 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:08:38 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:08:37 localhost dhcpcd[1438]: dhcpcd not running
Feb 15 17:08:37 localhost wicd[224]: dhcpcd[1438]: dhcpcd not running
Feb 15 17:08:37 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:08:37 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:08:37 localhost dhcpcd[1431]: dhcpcd not running
Feb 15 17:08:37 localhost wicd[224]: dhcpcd[1431]: dhcpcd not running
Feb 15 17:08:37 localhost kernel: wlan0: associated
Feb 15 17:08:37 localhost kernel: wlan0: RX AssocResp from a2:05:43:f9:33:a4 (capab=0x431 status=0 aid=2)
Feb 15 17:08:37 localhost kernel: wlan0: associate with a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:08:37 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:08:37 localhost kernel: wlan0: authenticated
Feb 15 17:08:37 localhost kernel: wlan0: send auth to a2:05:43:f9:33:a4 (try 1/3)
Feb 15 17:08:37 localhost kernel: wlan0: authenticate with a2:05:43:f9:33:a4
Feb 15 17:08:37 localhost kernel: wlan0: deauthenticating from 00:1a:4f:8d:06:3b by local choice (reason=3)
Feb 15 17:08:31 localhost dhcpcd[1280]: exited
Feb 15 17:08:31 localhost dhcpcd[1280]: timed out
Feb 15 17:08:01 localhost dhcpcd[1280]: wlan0: soliciting a DHCP lease
Feb 15 17:08:01 localhost dhcpcd[1280]: wlan0: IAID ca:59:49:5b
Feb 15 17:08:01 localhost dhcpcd[1280]: DUID 00:01:00:01:19:8e:1d:14:00:08:ca:59:49:5b
Feb 15 17:08:01 localhost dhcpcd[1280]: version 6.2.1 starting
Feb 15 17:08:00 localhost kernel: wlan0: associated
Feb 15 17:08:00 localhost kernel: wlan0: RX AssocResp from 00:1a:4f:8d:06:3b (capab=0x451 status=0 aid=1)
Feb 15 17:08:00 localhost kernel: wlan0: associate with 00:1a:4f:8d:06:3b (try 1/3)
Feb 15 17:08:00 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Feb 15 17:08:00 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Feb 15 17:08:00 localhost kernel: ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
Feb 15 17:08:00 localhost kernel: wlan0: authenticated
Feb 15 17:08:00 localhost kernel: wlan0: send auth to 00:1a:4f:8d:06:3b (try 1/3)
Feb 15 17:08:00 localhost kernel: wlan0: authenticate with 00:1a:4f:8d:06:3b
Feb 15 17:07:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:07:59 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:07:59 localhost dhcpcd[1250]: dhcpcd not running
Feb 15 17:07:59 localhost wicd[224]: dhcpcd[1250]: dhcpcd not running
Feb 15 17:07:59 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:07:59 localhost dhcpcd[1244]: dhcpcd not running
Feb 15 17:07:59 localhost wicd[224]: dhcpcd[1244]: dhcpcd not running
Feb 15 17:07:58 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
Feb 15 17:07:58 localhost dhcpcd[1234]: dhcpcd not running
Feb 15 17:07:58 localhost wicd[224]: dhcpcd[1234]: dhcpcd not running
Feb 15 17:07:58 localhost wicd[224]: Failed to connect to non-global ctrl_ifname: eth0 error: No such file or directory
Feb 15 17:07:58 localhost kernel: r8169 0000:02:00.0 eth0: link down
Feb 15 17:07:57 localhost dhcpcd[1224]: dhcpcd not running
Feb 15 17:07:57 localhost wicd[224]: dhcpcd[1224]: dhcpcd not running
Feb 15 17:07:57 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 15 17:07:57 localhost kernel: wlan0: deauthenticating from a2:05:43:f9:33:a4 by local choice (reason=3)
Feb 15 17:07:57 localhost dhcpcd[1217]: dhcpcd not running
Feb 15 17:07:57 localhost wicd[224]: dhcpcd[1217]: dhcpcd not running
Feb 15 17:07:53 localhost dhcpcd[655]: exited
Feb 15 17:07:53 localhost dhcpcd[655]: timed out
Feb 15 17:07:34 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:34 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Feb 15 17:07:34 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:34 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Feb 15 17:07:32 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Feb 15 17:07:32 localhost dbus[227]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Feb 15 17:07:32 localhost gnome-session[686]: ** (nm-applet:913): WARNING **: fetch_connections_done: error fetching connections: (32) Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory..
Feb 15 17:07:32 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:32 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Feb 15 17:07:32 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
Feb 15 17:07:32 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
Feb 15 17:07:32 localhost gnome-session[686]: ** (nm-applet:913): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:32 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:32 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Feb 15 17:07:29 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Feb 15 17:07:29 localhost dbus[227]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Feb 15 17:07:28 localhost dhcpcd[655]: wlan0: soliciting a DHCP lease
Feb 15 17:07:28 localhost dhcpcd[655]: wlan0: DHCP lease expired
Feb 15 17:07:26 localhost dhcpcd[655]: wlan0: reject NAK via 192.168.178.1
Feb 15 17:07:25 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Feb 15 17:07:25 localhost dbus[227]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Feb 15 17:07:25 localhost dbus[227]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Feb 15 17:07:25 localhost dbus[227]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
I will try the lastst code installation 2morrow and let you know the results. Thanx for your involvement!
Moderator edit [ewaller] Changed BBCode quote tags to code tags
Last edited by ewaller (2014-02-16 20:19:55) -
ORA-12545: Connect failed because target host or object does not exist(EBS)
Hi All,
We are using Oracle EBS R12 on Linux x86 Enterprise Server.
We have installed vision database (both apps and db on same machine)
Host name: ERPDEV
IP:192.168.1.211
We can connect from client machines to our database using sqlplus i.e.
sqlplus apps/****@vision
Similarly tnsping is also successfully returning results.
Also following commands are returning results
ping erpdev
ping 192.168.1.211
ping erpdev.domainname.com
All above commands are running fine.
However we are trying to create new "Legal Address Entry" through "Legal Entry Manager". After filling all the details like Location,Country,City etc, when I push the apply button, getting following error messages:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1674 ORA-12545: Connect failed because target host or object does not exist in Package xle_legal_address_swi Procedure create_legal_address
I dont know why this ORA-12545 error is occuring through application although all of the above tests are running fine from client terminals.
Do any one have any solution for this???
Thanks
FarooqHi,
I really am new to this application.
I could not get this document.
Can you pls guide me, how can i fix this problem.
It's really imp to me to fix this.
--Satish -
Connect failed because target host or object does not exist
Hello,
I've installed XE 10.2 under Fedora Core 7 from the downloaded .rpm. The RPM installs fine, and I've run the config from the command line. I've edited my bash file to load the environment variables. Here's my hosts file:
xxx.xxx.xxx.xxx hostname hostname.domain
127.0.0.1 localhost.localdomain localhost
When I start the oracle-xe service from the services interface, I get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-JUL-2007 14:49:01
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX.XXXX)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
with the HOST name filled in. None of the messages I've searched though on this forum relate to this error. Any help would be greatly appreciated.
-B
ps. I'm running this on my local machine.Thanks! that got most of my listener up and running. I now get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-JUL-2007 09:01:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 24-JUL-2007 09:01:31
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
I performed a quick search on the forum and then tried this:
SQL> connect / as sysdba
Connected.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
I checked the log file and it shows this:
Fri Jul 20 11:14:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:17 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5332
Fri Jul 20 11:14:18 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:18 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5334.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5334
Fri Jul 20 11:14:19 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:19 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5341.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5341
Fri Jul 20 11:14:20 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:20 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5360.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5360
Fri Jul 20 13:47:47 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:47:47 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7963.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7963
Fri Jul 20 13:48:41 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:48:41 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8332
Fri Jul 20 13:49:32 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:49:32 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8671.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8671
Fri Jul 20 13:50:51 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:50:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8708.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8708
Fri Jul 20 14:15:44 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:15:44 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9214.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9214
Fri Jul 20 14:27:16 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:27:16 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9688.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9688
Fri Jul 20 14:32:26 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:32:26 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9828.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9828
Fri Jul 20 14:40:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
MMAN started with pid=4, OS id=2232
PSP0 started with pid=3, OS id=2230
PMON started with pid=2, OS id=2228
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Fri Jul 20 14:40:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Fri Jul 20 14:40:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Jul 20 14:40:42 2007
ALTER DATABASE MOUNT
Fri Jul 20 14:40:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Jul 20 14:40:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:23:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2228
PSP0 started with pid=3, OS id=2230
MMAN started with pid=4, OS id=2232
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Mon Jul 23 08:23:19 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Mon Jul 23 08:23:19 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 08:23:20 2007
ALTER DATABASE MOUNT
Mon Jul 23 08:23:20 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 08:23:23 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:28:52 2007
Starting ORACLE instance (normal)
Mon Jul 23 14:22:36 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2226
PSP0 started with pid=3, OS id=2228
MMAN started with pid=4, OS id=2230
DBW0 started with pid=5, OS id=2232
LGWR started with pid=6, OS id=2234
CKPT started with pid=7, OS id=2236
SMON started with pid=8, OS id=2238
RECO started with pid=9, OS id=2240
CJQ0 started with pid=10, OS id=2242
MMON started with pid=11, OS id=2244
Mon Jul 23 14:22:38 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2246
Mon Jul 23 14:22:38 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 14:22:39 2007
ALTER DATABASE MOUNT
Mon Jul 23 14:22:39 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 14:22:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:05:53 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PSP0 started with pid=3, OS id=2235
MMAN started with pid=4, OS id=2237
PMON started with pid=2, OS id=2233
DBW0 started with pid=5, OS id=2239
LGWR started with pid=6, OS id=2241
CKPT started with pid=7, OS id=2243
SMON started with pid=8, OS id=2245
RECO started with pid=9, OS id=2247
CJQ0 started with pid=10, OS id=2249
MMON started with pid=11, OS id=2251
Tue Jul 24 08:05:55 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2253
Tue Jul 24 08:05:55 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:05:56 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:05:56 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:05:59 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:16:25 2007
Stopping background process CJQ0
Tue Jul 24 08:16:25 2007
Stopping background process MMNL
Tue Jul 24 08:16:26 2007
Stopping background process MMON
Tue Jul 24 08:16:27 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:16:27 2007
Stopping Job queue slave processes
Tue Jul 24 08:16:27 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 08:16:29 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:16:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3340
PSP0 started with pid=3, OS id=3342
MMAN started with pid=4, OS id=3344
DBW0 started with pid=5, OS id=3346
LGWR started with pid=6, OS id=3348
CKPT started with pid=7, OS id=3350
SMON started with pid=8, OS id=3352
RECO started with pid=9, OS id=3354
CJQ0 started with pid=10, OS id=3356
MMON started with pid=11, OS id=3358
Tue Jul 24 08:16:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3360
Tue Jul 24 08:16:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:16:32 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:16:32 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:16:32 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:38:07 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:43:09 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:49:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2224
PSP0 started with pid=3, OS id=2226
MMAN started with pid=4, OS id=2228
DBW0 started with pid=5, OS id=2230
LGWR started with pid=6, OS id=2232
CKPT started with pid=7, OS id=2234
SMON started with pid=8, OS id=2236
RECO started with pid=9, OS id=2238
CJQ0 started with pid=10, OS id=2240
MMON started with pid=11, OS id=2242
Tue Jul 24 08:49:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2244
Tue Jul 24 08:49:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:49:42 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:49:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:49:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:51:39 2007
Stopping background process CJQ0
Tue Jul 24 08:51:39 2007
Stopping background process MMNL
Tue Jul 24 08:51:40 2007
Stopping background process MMON
Tue Jul 24 08:51:41 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:51:41 2007
Stopping Job queue slave processes
Tue Jul 24 08:51:41 2007
Job queue slave processes stopped
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Tue Jul 24 08:51:42 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:51:45 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3070
PSP0 started with pid=3, OS id=3072
MMAN started with pid=4, OS id=3074
DBW0 started with pid=5, OS id=3076
LGWR started with pid=6, OS id=3078
CKPT started with pid=7, OS id=3080
SMON started with pid=8, OS id=3082
RECO started with pid=9, OS id=3084
CJQ0 started with pid=10, OS id=3086
MMON started with pid=11, OS id=3088
Tue Jul 24 08:51:45 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3090
Tue Jul 24 08:51:45 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:51:45 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:51:45 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:51:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:00:41 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:00:54 2007
Starting ORACLE instance (normal)
Tue Jul 24 09:01:02 2007
alter database open
Tue Jul 24 09:01:02 2007
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:01:21 2007
Shutting down instance: further logons disabled
Tue Jul 24 09:01:21 2007
Stopping background process CJQ0
Tue Jul 24 09:01:21 2007
Stopping background process MMNL
Tue Jul 24 09:01:22 2007
Stopping background process MMON
Tue Jul 24 09:01:23 2007
Shutting down instance (immediate)
License high water mark = 2
Tue Jul 24 09:01:23 2007
Stopping Job queue slave processes
Tue Jul 24 09:01:23 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 09:01:29 2007
PMON failed to acquire latch, see PMON dump
Tue Jul 24 09:01:29 2007
ALTER DATABASE CLOSE NORMAL
Tue Jul 24 09:01:29 2007
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 09:01:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3682
PSP0 started with pid=3, OS id=3684
MMAN started with pid=4, OS id=3686
DBW0 started with pid=5, OS id=3688
LGWR started with pid=6, OS id=3690
CKPT started with pid=7, OS id=3692
SMON started with pid=8, OS id=3694
RECO started with pid=9, OS id=3696
CJQ0 started with pid=10, OS id=3698
MMON started with pid=11, OS id=3700
Tue Jul 24 09:01:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3702
Tue Jul 24 09:01:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 09:01:31 2007
ALTER DATABASE MOUNT
Tue Jul 24 09:01:31 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:01:31 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:01:57 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:02:47 2007
alter database mount
Tue Jul 24 09:02:47 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:02:47 2007
ORA-205 signalled during: alter database mount...
I checked the /usr/lib/oracle/xe/oradata/XE/ directory, and there is nothing in that file...
I am also concerned about these lines near the top of the log:
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths -
Could not open a connection to host on port 23 : Connect failed
Hi,
I am using Oracle Unbrakeable Linux 5, when i try to connect to the server from the client machine using TELNET, i get the following error
c:/> telnet 192.168.6.184
Connecting to 192.168.6.184...Could not open a connection to host on port 23 : Connect failed.
regards,
CharanHi,
i did the following but still doesn't work
# mv /etc/securetty /etc/securetty.bak
The following is the Hosts file
=====================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.6.184 vision12.dsrc2.com vision12
#::1 localhost6.localdomain6 localhost6
192.168.6.181 prod20.dsrc2.com prod20
============================================================
When i try to connect to other server using TELNET from this server, i am able to connect. and when i try to connect to this server from other server using TELNET i am able to connect. But, when i try to connect from the CLIENT Machine, i am not able to connect, the client machine is Windows 2000 Professional.
SERVER to SERVER communication using TELNET is working.
CLIENT to SERVER communication using TELNET is not working.
regards,
Charan -
Can't Install oracle 10g on Linux Ubuntu server
Hi all,
I was looking for the oracle 10g client to install in a Ubuntu Server but When I am trying to install it is giving me the following error:
Checking Installer Requirements...
Checking operational system version: must be redhat-3, suse 9, redhat-4.... and other <<<Failed
All the forums I've search I only find people installing Oracle-xe version but I don't want the express version.
Is there a way to install the oracle 10g version on a ubuntu server?
Could'nt find the 10g forum that is why I am posting here.
Thanks in advance.Hi,
Ubuntu is not supported OS.
You can check these blogs
For client
http://thisbrokenworld.wordpress.com/2008/04/10/oracle-10g-client-tools-on-ubuntu-710/
For database
http://revtech0.ash.com/blog/45254/entry/482/installing-oracle-10gr2-on-gutsy.html
http://www.makina-corpus.org/blog/how-install-oracle-10g-full-64-bits-version-not-xe-and-tora-gnu-linux-ubuntu-karmic-910-64-bits
http://www.excession.org.uk/blog/installing-oracle-on-ubuntu-karmic-64-bit.html
Regards,
Jari -
Problem with a Flex into Linux (Ubuntu)
Good morning to all
I have a problem with a project done in flash builder 4.
My project works well in a WAMP Server in Windows 7 is a project that connects to a MySQL database, but I would like to migrate the entire project done in a WAMP server on Linux (Ubuntu Web Server). The problem I have is that my Ubuntu server I have everything properly installed:
Apache
Php
MySQL - phpMyAdmin
Zend Framework
but when I upload all my project from WAMP to my Linux server - I get an error:
... Class "CategoryService" does not exist: Plugin by name 'CategoryService' was not found in the registry; Used paths:
: C: / wamp / www / Servers-debug / services /
# 0 / opt/ZendFramework/release-1.9.7/library/Zend/Amf/Server.php (550): Zend_Amf_Server-> _dispatch ('getAllCategory', Array, 'CategoryService')
# 1 / opt/ZendFramework/release-1.9.7/library/Zend/Amf/Server.php (626): Zend_Amf_Server-> _handle (Object (Zend_Amf_Request_Http))
# 2 / var / www / Servers-debug / gateway.php (69): Zend_Amf_Server-> handle ()
# 3 (main) ...
obviously -> "... C: / wamp / www / Servers-debug / services / ..." it is a mistake because it is the path of my wamp server (Windows), but do not know
where to modify the code of my project to understand the
following path: / var / www / Servers-debug / services / <- that is my address in ubuntu?
anyone can help me, please!!Good morning to all
I have a problem with a project done in flash builder 4.
My project works well in a WAMP Server in Windows 7 is a project that connects to a MySQL database, but I would like to migrate the entire project done in a WAMP server on Linux (Ubuntu Web Server). The problem I have is that my Ubuntu server I have everything properly installed:
Apache
Php
MySQL - phpMyAdmin
Zend Framework
but when I upload all my project from WAMP to my Linux server - I get an error:
... Class "CategoryService" does not exist: Plugin by name 'CategoryService' was not found in the registry; Used paths:
: C: / wamp / www / Servers-debug / services /
# 0 / opt/ZendFramework/release-1.9.7/library/Zend/Amf/Server.php (550): Zend_Amf_Server-> _dispatch ('getAllCategory', Array, 'CategoryService')
# 1 / opt/ZendFramework/release-1.9.7/library/Zend/Amf/Server.php (626): Zend_Amf_Server-> _handle (Object (Zend_Amf_Request_Http))
# 2 / var / www / Servers-debug / gateway.php (69): Zend_Amf_Server-> handle ()
# 3 (main) ...
obviously -> "... C: / wamp / www / Servers-debug / services / ..." it is a mistake because it is the path of my wamp server (Windows), but do not know
where to modify the code of my project to understand the
following path: / var / www / Servers-debug / services / <- that is my address in ubuntu?
anyone can help me, please!! -
How to install JDK on LINUX Ubuntu on system with no net/wireless?
Hello!
I need to install JDK on LINUX Ubuntu on system with no net/wireless connection.
What are the commands?
Thank you!
Edited by: 800512 on 07:29 10/01/2011- Download your release of choice from http://www.oracle.com/technetwork/java/javase/downloads/index.html
- Put the file on a USB thumb drive
- Mount that drive on the target machine
- Follow the installation instructions.
The Linux/Ubuntu downloads of the JDK are offline installers (i.e. the downloaded file contains everything that's required). Only Windows currently has an online installer (smaller initial download, but requires a net connection for the actual installation)
Alternatively: install the OpenJDK from the official Ubuntu packages using apt-zip (http://wiki.debian.org/AptZip). -
Installing SQL Server 2012 on Linux Ubuntu
Hello, Can I install SQL Server 2012 on Linux Ubuntu? So far I can only find downloads of ODBC for Red Hat. Any ideas?
Hi Mike,
Please also take a look at the following article regarding the Operating System requirement to install SQL Server:
Hardware and Software Requirements for Installing SQL Server 2012:
http://technet.microsoft.com/en-us/library/ms143506.aspx
As Sean said, we can connect to SQL Server via ODBC from Linux Ubuntu. Here are some articles for your reference, please see:
SQL Server ODBC Driver:
http://www.easysoft.com/products/data_access/odbc-sql-server-driver/index.html
Connecting to Microsoft SQL Server using ODBC from Ubuntu Server:
http://blog.jamesrossiter.co.uk/2011/03/08/connecting-to-microsoft-sql-server-using-odbc-from-ubuntu-server/
Regards,
Elvis Long
TechNet Community Support -
hey all
this is my first app to access remote data, and i am trying to build both clieant and server side
i am working on a flashbuilder 4.6 and php simple system.
I use the php data wizard to build my php code/services and develop locally on a wamp server, configuring the local mysql db with phpmyadmin. the wizard itself enables the zend framework needed
locally, all looks fine
i am trying out deployment to my real, linux based remote server, and for the first step I uploaded my php services to the remote server
i used this guide by Mihai Corlan and when testing my app i get an Alert with
Send failed
Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 501: url: 'http://(my domain + file structure to..)gateway.php'
so i guess even before i get to see if i changed the amf_config.ini and gateway.php itself and the services properly for deployment i am unable to connect to the gateway, correct?
http 501 is something about html headers? i dont know any html, any php, any sql just as3 and mxml
can anyone help?I do get "Zend Amf Endpoint" - as well - the app works perfectly when testing on my desktop as iphone4 simulation and on android, just not on my 4s device.
as a side note, i can even browse to the gateway.php that I have set up via safari on the device. That makes me think that theres just some dumb http entitlement or "allow" setting for ios that I'm not finding.
Maybe you are looking for
-
Unable to transfer pix from computer to iPod
When I try to download photos from my iPod to my computer (Windows XP)I get the following message: "The iPod 'My name' cannot be synced. The disk could not be read from or written to." I have no problems with music, podcasts, video etc., just photogr
-
Change the database charecterset in 9.2.0.7
Hi, we have 9.2.0.7 database running on HP-UX Itanium 64bit. we have current WE8MSWIN1252 as the charecter set. we use this db for banking application. This Database contains english and Arabic data also. so we are in the process of upgrade of bankin
-
BC 4.8 Migration for SAP e-filing
Hello, We are planning to upgrade existing BC 4.7 to BC 4.8 on new hardware. I am bit concerened about SAP e-filing package for GB customer, How will it function when upgraded to BC 4.8. My basic queries are 1. Is any newer release of BC Application
-
PLS LET ME KNOW IF YES
-
Reload a virtual context in ACE
Hi, is possible to reload one or more virtual contexts in ACE module? Is possible to download checkpoints from ACE to remote server and vice versa? Thank you