LIS extraction and BCT

Hi,
can anyone share a document with detailed steps on how to use and activate LIS structures?
   I´m trying to use standard inforsource 2LIS_01_S001and I´m lost.
Best Regards
Walter

Hi ,
Re: LIS extraction Will help you
Renjith Kumar

Similar Messages

  • Relation between LIS datasources and Extract Structures

    Roberto,
    Your detailed information does make it very clear why the SAP creates 2 SnnBIW1, SnnnBIW2 tables, and a structure.
    I have another question related to this process.
    Once you create a datasource from the custom LIS structures, you can assign a Development class to that datasource.
    But the automatically created 2 tables and the structure are local objects, and you cannot reassign them to other object. That is fine because when you export/import the transport, all the other objects are also transported.
    But when we enhance the extract structures, it creates a structure ZASnnnBIWS which also HAS TO BE a local object. This creates a problem of how do we transport these changes?
    I would appreciate your insight into this.
    Thanks
    InduBala

    I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
    How would I check "..<i>fields you have enhaced are ready to use</i>...." from LBWE.
    From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
    "<i>Did you check in LBWE if your strcutures have the fields ready to use?" </i>How would I do this? Maybe this is the problem.
    Thanks
    Message was edited by:
            NoNoNo ...

  • LIS Extraction

    Hi,
    I have one exisitng cube(based on LIS datasource) which is getting data for the last two+ years and a new one which i have to extract and load now.The data source for both is 2LIS_02_ITM.What steps should i take while initializing for the new one to ensure that i do not upset the older cube.
    Regards
    Kalpit

    Hi,
    The simplest way to do that is as follows, but there is a pre-requisite, i.e. all your requests should exist and be available in the PSA.
    If yes, then just open the new cube; go into the recontruction tab.
    1.  Search/Select the original init request and click the reconstruct button
    2.  Once done, start doing the same for all the other requests.  You can do this in one go, if the number of requests are not large or in groups/ranges.
    3.  Once done, open the current infopackage in use for delta from this datasource and in the Data Targets Tab, tick the check box in front of the new cube.
    Your cube is now ready to load normal delta along with the other targets.
    However, if PSA is not available, then here is what you do.
    If all the fields are already contained in the other cubes or ODSs, then:
    1.  Create an update rule from one of them to the new cube.
    2.  Carry out a full load. 
    3.  Once done, delete the original init on the datasource, ensure no extraction run is on or no job is active in LBWE for the datasource.
    4.  Carry out an init without data transfer for all the data targets you want.
    Your cubes are now ready for the next delta run.
    As always, be careful of the sequence and before running it on the productive system, carry out a couple of trial runs on your Dev or Quality box.
    Cheers...

  • LIS header and ITEM ds

    Could you guys please help understand how i can retreive LIS header and ITEM level DS? what is that contains and how i can use that inforamation in BW?
    do i need to have diferrent target for Both DS?
    any details about this will be apreaciated....

    hi,
    hope u r using the LO extractions.
    for loading data to the BW for LO header and item for any applications, hope u can use different DSO/ODS at the first level and can combine the data in the next level with cube. if you do this type then memory is saved in the second level but report performance will be low.
    in the second lvele also if u use two cube to store data and using multiprovider combine both the cubes to achieve effective and effiecient reports with good performance.
    Ramesh

  • Diffrance between SD extraction and FI extraction

    Hello Friends,
    Can you please suggest me what is a difference of extracting FI data and SD data from R/3?
    As I know that SD extraction is through LO method and it is based on V3 update.
    But what about FI and is there any specific difference while extracting the data from FI.
    FI data source is based on table; let’s take an example that I want to extract the data for Special ledger and for Sales distribution cube.
    Please let me know that what all are the scenario where we can differentiate SD extraction and FI extraction.
    If any once can give me FI SL extraction navigation steps then it would be really nice help for me.
    Regards

    Jain
    Check this previous thread
    Differences between LIS,LO,CO/PA and FI-SL extractors
    FI-SL
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
    CO PA
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
    Thnaks
    Sat

  • Need LIS Extraction Step by Step

    Hi ,
    Any one can give me a LIS Extraction Step by Step.
    Already i've got some LIS Extraction steps, but i haven't clear with that.
    MC18 &#8211; create field catalog
    How to create this field catalog?
    THanks,
    Arun.M.D

    Hi,
    LIS
    lis
    Steps in LIS EXTRACTION:
    T.code - :MC18 – create field catalog
    1. Characteristic Catalog
    Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
    Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
    Save, similarly create key figures catalog
    T.code : MC21 – create infostructure
    Example –
    Inforstructure : S789
    Application – 01
    Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
    T.code – MC24 – create updating
    Infostructure : S789
    Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating –1)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
    T.code – LBW0 - Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
    Select the radio button-Generate data source and Execute.
    For Delta update:
    Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
    T.code – SBIW – Display IMG (implementation guide) Setting for applications specific data source – logistics – Managing transfer information structure – setup of statistical data – applications specific setup of statistical data –perform statistical setup – sales.
    Choose activity
    Setup – Orders, deliveries, billing
    Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
    T.code – RSA3 – Extractor checker
    Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source – Assign infosource – Create infocube – Create update rules – create infopackage and schedule the package with initialize delta process.
    For delta update :
    In R/3 side
    T.code – MC25, set update (V1) or (V2) or (V3)
    T.code – LBW0, choose generate updating and execute then choose activate / deactivate and execute
    BW side - create infopackage and schedule the package with delta update.
    First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
    If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
    and schedule the infopackage with delta update.
    Modules for LIS : SD,MM, PP,QM.
    Deltas for LIS:
    After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables ‘SnnnBIW1’, ‘SnnnBIW2’ and the structure ‘SnnnBIWS’ and the InfoStructure itself ‚Snnn‘
    The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
    Extract structure ‘SnnnnBIWC’ is used as an interface structure between OLTP InfoStructure and BW
    The OLTP system has automatically created an entry in the control table ‘TMCBIW’. Within transaction ‘SE16’ you’ll see, that for your particular InfoStructure the field ‘BIW active’ has the value ‘X’ and the field ‘BIW status’ is filled with value ‘1’ (refers to table SnnnBIW1).
    The orgininal LIS update program ‚RMCX#### will be enhanced within the form routines ‚form Snnnbiw1_update_....‘ and ‚form Snnnbiw2_update
    With the transaction ‘SE38’ you’ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a ‘BIW delta update’ coding
    Within the flag ‚Activate/Deactivate‘ the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table ‚TMCBIW‘ is defined, which table is active for delta update.
    Note: The delta updating is client dependent !
    Thanks,
    JituK

  • LIS EXTRACTION STEP BY STEP

    hi friends
    i want some information on lis extraction in step by step
    thanks in advance
    regards
    shafeeq

    Dear Shafeeq ,
    Look at the following steps :
    LIS EXTRACTION
    T.code - :MC18 – create field catalog
    1. Characteristic Catalog
    Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory
    Controlling, etc..
    Catalog category 1. Characteristic catalog, 2. Key figures catalog 3.
    Date catalog
    Select characteristic catalog and enter, click on characteristic select
    the source table and it will be display the relevant source field and
    select the source field, copy + close, copy.
    Save, similarly create key figures catalog
    T.code : MC21 – create infostructure
    Example –
    Inforstructure : S789
    Application – 01
    Choose characteristic select the catalog, select the fields, copy +
    close
    Choose key figures catalog select the key figures ,copy + close, save
    and generate
    T.code – MC24 – create updating
    Infostructure : S789
    Update group : 01- Sales document, delivery, billing document ,enter
    Select the key figures click on rules for key figures give suggest
    rules, copy save and generate
    Click on updating (activate updating)
    Select the infostructure set periodic split 1. Daily, 2. Week, 3.
    Month, 4. Posting period
    Updating –1)No updating,2)Synchronous updating (V1), 3)As synchronous
    updating (V2), 4)As synchronous updating (V3),
    T.code – LBW0 - Connection of LIS Information structures to SAPBW
    Information structure : S786
    Select the radio button-Setup LIS environment and Execute.
    Select the radio button-Generate data source and Execute.
    For Delta update:
    Select the radio button-Generate updating and Execute
    Select the radio button -Activate / deactivate and Execute.
    T.code – SBIW – Display IMG (implementation guide)
    Setting for applications specific data source – logistics – Managing
    transfer information structure – setup of statistical data – applications
    specific setup of statistical data –perform statistical setup – sales.
    Choose activity
    Setup – Orders, deliveries, billing
    Choose the activities enter the infostructure (S789), give name of the
    run, date of termination, time of termination, No. of tolerated faulty
    documents. Then execute
    T.code – RSA3 – Extractor checker
    Give the data source name eg. 2LIS 01S789 and execute, result will
    get some records
    Go to BW side replicate data source – Assign infosource – Create
    infocube – Create update rules – create infopackage and schedule the package
    with initialize delta process.
    For delta update :
    In R/3 side
    T.code – MC25, set update (V1) or (V2) or (V3)
    T.code – LBW0, choose generate updating and execute then choose
    activate / deactivate and execute
    BW side - create infopackage and schedule the package with delta
    update.
    First time if your scheduling the infopackage -in R/3 side T.code :MC25
    -Udating set to No update,insted of selecting the update V1,V2,V3.
    If your doing the Delta update:in R/3 side T.code :MC25-Updating set to
    either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button
    Active/deactivate and Execute.
    and schedule the infopackage with delta update.
    ***its been taken from one of the thread in SDN by RAJ , Thanks Raj
    Hope it helps..
    Thanks,
    Krish

  • LIS EXTRACTIONS

    Hi firends,
    1) want to now why we go for the LIS EXTRACTIONS?
    2) what r the steps for the LIS ?
    3) What r the Modules used for the LIS ?
    4)where we can put the DELTAS for the LIS?
    thanks and regards
    shafeeq ahmed

    hi
    steps for LIS:
    Step by Step for LIS Extraction
    LIS EXTRACTION
    T.code - :MC18 – create field catalog
    1.     Characteristic Catalog
    Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc.
    Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog
    Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
    Save, similarly create key figures catalog
    T.code : MC21 – create infostructure
    Infostructure : S789
    Application – 01
    Choose characteristic select the catalog, select the fields, copy + close
    Choose key figures catalog select the key figures ,copy + close, save and generate
    T.code – MC24 – create updating
    Infostructure : S789
    Update group : 01- Sales document, delivery, billing document ,enter
    Select the key figures click on rules for key figures give suggest rules, copy save and generate
    Click on updating (activate updating)
    Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period
    Updating –1)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
    T.code – LBW0 - Connection of LIS Information structures to SAPBW
    Information structure : S786
    Select the radio button-Setup LIS environment and Execute.
    Select the radio button-Generate data source and Execute.
    For Delta update:
    Select the radio button-Generate updating and Execute
    Select the radio button -Activate / deactivate and Execute.
    T.code – SBIW – Display IMG (implementation guide)
    Setting for applications specific data source – logistics – Managing transfer information structure – setup of statistical data – applications specific setup of statistical data –perform statistical setup – sales.
    Choose activity
    Setup – Orders, deliveries, billing
    Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
    T.code – RSA3 – Extractor checker
    Give the data source name eg. 2LIS 01S789 and execute, result will get some records
    Go to BW side replicate data source – Assign infosource – Create infocube – Create update rules – create infopackage and schedule the package with initialize delta process.
    For delta update :
    In R/3 side
    T.code – MC25, set update (V1) or (V2) or (V3)
    T.code – LBW0, choose generate updating and execute then choose activate / deactivate and execute
    BW side - create infopackage and schedule the package with delta update.
    First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
    If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
    and schedule the infopackage with delta update.
    3.Modules:
    SD,MM, PP,QM..
    4. Deltas for LIS:
    After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables ‘SnnnBIW1’, ‘SnnnBIW2’ and the structure ‘SnnnBIWS’ and the InfoStructure itself ‚Snnn‘
    The tables  S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
    Extract structure ‘SnnnnBIWC’ is used as an interface structure between OLTP InfoStructure and BW
    The OLTP system has automatically created an entry in the control table ‘TMCBIW’. Within transaction ‘SE16’ you’ll see, that for your particular InfoStructure the field ‘BIW active’ has the value ‘X’ and the field ‘BIW status’ is filled with value ‘1’ (refers to table SnnnBIW1).
    The orgininal LIS update program ‚RMCX#### will be enhanced within the form routines ‚form Snnnbiw1_update_....‘  and ‚form Snnnbiw2_update
    With the transaction ‘SE38’ you’ll see at the end of the program [starting at line 870 / 1006], that the program is enhanced within a ‘BIW delta update’ coding
    Within the flag  ‚Activate/Deactivate‘ the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table ‚TMCBIW‘ is defined, which table is active for delta update.
    Note: The delta updating is client dependent !
    Regards,
    M Kalpana

  • I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again

    I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again it says that the "Object Already Exists."  It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

    cactisken
    You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
    Can you still use 12/12.1 on this same computer that will not let you use 13?
    What specific Window operating system are you using?
    Let us go through the usual drill...
    1. Does the problem exist with and without the antivirus and firewall(s) disabled?
    2. Are you using a pen and tablet device instead of a mouse?
    3. Did you install the program with antivirus and firewall(s) disabled?
    4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
    Local Disk C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
    from SLCache to SLCacheOLD.
    5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
    computer as Premiere Elements 13?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • Extraction and Reporting is not working in BI SYSTEM

    Hi,
            The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

    HI,
    If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
    Regards,
    Sharath

  • Maintenance view:  how to read EXTRACT and TOTAL table

    Hi, All,
    I created a maintenance view, as stated in the documentation, there are 2 internal tables EXTRACT and TOTAL available in running environment. Now I want to read a record from the internal table by using "READ TABLE...."
    In my example: the table strucutre has  A, B, C 3 fields.
    So I tried to use "READ TABLE EXTRACT with key A=' xyz' assigning <fs>", in this case, the syntax check shows error saying that the specified type has no structure and no component can be called.
    So how can I search a row in the table EXTRACT and TOTAL by giving a field value? Is there any other way to get data from the table?
    Thank you!

    Hi Yongying,
    I know this is an old post, but, may be this is still helpful for you or for others with the same problem.
    Just add the option "CASTING" at the end of your READ statement:
    "READ TABLE EXTRACT with key A=' xyz' assigning  must be full typed or at least, be of the same type of the Z table from which is generated the itab EXTRACT.
    Regards,
    José Gabriel.

  • Error message when trying to extract and install

    Why do I keep getting an error message for CS6 beta when I try to extract and install, message file missing?

    I assume you downloaded from here:  http://labs.adobe.com/technologies/photoshopcs6/
    Did you successfully download the file and check file sizes match? Do you extract ok?  PC, I assume? What OS are you using?
    How far did you get in the installation? Did you select TRY rather than enter serial number? Did you enter your Adobe ID?
    By the way, you should change your name to something other than your email as the bots will go nuts when they find that and you may get spam.
    Pattie

  • Using extract and existnodes in a SQL query

    I have created a table having one column of datatype xmltype in oracle 9i and inserted 2 rows. When I try to execute the select query having extract and existsnode it is giving me ORA-00904: invalid column name.
    CREATE TABLE xml_tab ( xmlval sys.xmltype);
    INSERT INTO xml_tab VALUES (
    sys.xmltype.createxml('<?xml version="1.0"?>
    <EMP>
    <EMPNO>221</EMPNO>
    <ENAME>John</ENAME>
    </EMP>'));
    INSERT INTO xml_tab VALUES (
    sys.xmltype.createxml('<?xml version="1.0"?>
    <PO>
    <PONO>331</PONO>
    <PONAME>PO_1</PONAME>
    </PO>'));
    SELECT e.xmlval.extract('//EMPNO/text()').getNumVal() AS empno
    FROM xml_tab
    WHERE e.xmlval.existsnode('/EMP/EMPNO') = 1;

    Correct forum for extract() and existsnode() SQL functions is /Products/Database/XML DB.. Please post there

  • When we go for Business content extraction and when we go for LO/COPA etc.e

    Hi Dear Friends
    When we go for Business content extraction and when we go for LO/COPA etc.extractions
    Thanks
    Learner

    Hi,
    It depends on the KPI you are extracting for,if Business Content Extractor provides you with those then there is no need for generic extractors.
    In CO-PA the KPI for profitability differs from client to client.You have Business Content for CO-PA also...
    Cheers

  • Unable to start Extract and Replicate process?

    Hi,
    I have setup GG b/w two 10.2 databases in two different server(RHEL 5) . But unable to start the extract and replicate process
    Source
    GGSCI (prod.naveed.com) 1> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     STOPPED                                          
    EXTRACT     STOPPED     EXT1        00:00:00      00:43:42   
    GGSCI (prod.naveed.com) 2> start mgr
    Manager started.
    GGSCI (prod.naveed.com) 3> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    EXTRACT     STOPPED     EXT1        00:00:00      00:43:48   
    GGSCI (prod.naveed.com) 4> start extract ext1
    Sending START request to MANAGER ...
    EXTRACT EXT1 starting
    GGSCI (prod.naveed.com) 5> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    EXTRACT     STOPPED     EXT1        00:00:00      00:43:56   
    GGSCI (prod.naveed.com) 6> view params mgr
    PORT 7809
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
    GGSCI (prod.naveed.com) 7> view params ext1
    –extract group–
    extract ext1
    –connection to database–
    userid GG_ADMIN, password GG_ADMIN
    –hostname and port for trail–
    rmthost 172.168.1.11, mgrport 7809
    –path and name for trail–
    rmttrail /home/oracle/golden_gate/dirdat/lt
    –DDL support
    DDL INCLUDE ALL
    ddl include mapped objname NAVEED.*;
    –DML
    table NAVEED.*;
    GGSCI (prod.naveed.com) 8> exitTarget
    [oracle@Test golden_gate]$ ./ggsci
    Oracle GoldenGate Command Interpreter for Oracle
    Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
    Linux, x86, 32bit (optimized), Oracle 10g on Apr 23 2012 07:06:02
    Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
    GGSCI (Test.naveed.com) 1> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    REPLICAT    STOPPED     REP1        00:00:00      00:35:39   
    GGSCI (Test.naveed.com) 3> start replicat rep1
    Sending START request to MANAGER ...
    REPLICAT REP1 starting
    GGSCI (Test.naveed.com) 4> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    REPLICAT    STOPPED     REP1        00:00:00      00:36:06   
    GGSCI (Test.naveed.com) 5> view params mgr
    PORT 7810
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
    GGSCI (Test.naveed.com) 6> view params rep1
    -Replicat group-
    replicat rep1
    –target database login –
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    –file for dicarded transaction –
    discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
    –ddl support
    DDL INCLUDE ALL
    DDLERROR DEFAULT IGNORE RETRYOP
    –Specify table mapping —
    MAP NAVEED.*,       TARGET NAVEED.*;
    GGSCI (Test.naveed.com) 7>

    Thanks it worked, I m able to start both extract and replicate process.
    But when i create a new table and do some DML it is not getting replicated in the TARGET DB?
    Source
    GGSCI (prod.naveed.com) 1> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    EXTRACT     RUNNING     EXT1        00:30:52      00:00:10   
    GGSCI (prod.naveed.com) 2> view mgr
    ERROR: Invalid command.
    GGSCI (prod.naveed.com) 3> view params mgr
    PORT 7809
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
    GGSCI (prod.naveed.com) 4> view params ext1
    --extract group
    extract ext1
    --connection to database
    userid GG_ADMIN, password GG_ADMIN
    --hostname and port for trail
    rmthost prod.naveed.com, mgrport 7809
    --path and name for trail
    rmttrail /home/oracle/golden_gate/dirdat/lt
    --DDL support
    ddl include mapped objname NAVEED.*;
    --DML
    table NAVEED.*;Target
    GGSCI (Test.naveed.com) 3> info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    REPLICAT    RUNNING     REP1        00:00:00      00:00:02   
    GGSCI (Test.naveed.com) 4> view params mgr
    PORT 7810
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
    GGSCI (Test.naveed.com) 5> view params rep1
    --Replicat group
    replicat rep1
    --target database login –
    USERID GG_ADMIN, PASSWORD GG_ADMIN
    --file for dicarded transaction –
    discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
    --ddl support
    DDL INCLUDE ALL
    --Specify table mapping
    MAP NAVEED.*, TARGET NAVEED.*;Source
    SQL> conn NAVEED/NAVEED
    Connected.
    SQL> create table tab_1 (id number,rnd_str varchar2(12));
    SQL> insert into tab_1 values (1,'test_1');
    SQL>commit;
    SQL> select * from tab_1;
            ID RND_STR
             1 test_1Target database:
    SQL> conn NAVEED/NAVEED
    Connected.
    SQL> select * from tab_1;
    select * from tab_1
    ERROR at line 1:
    ORA-00942: table or view does not exist

Maybe you are looking for