List Box in ALV Grid

Hi all,
How to bring a list box in ALV Grid
Regards,
Vijayakumar
Message was edited by:
Vijayakumar V

Hello Vijayakumar
You have to do 2 steps (inbetween creating the fieldcatalog and displaying the ALV list):
(1) Set dropdown handle in fieldcatalog, e.g.
* Set Drop-Down handle for column 'LOGSYS'
CLEAR l_wa_fcat.
* l_wa_fcat-drdn_field = 'DROP_DOWN_HANDLE'.
l_wa_fcat-drdn_hndl = c_drdn_handle_logsys. " just a unique number
MODIFY me->mt_fcat FROM l_wa_fcat
      TRANSPORTING drdn_hndl
    WHERE ( fieldname = 'LOGSYS' ).
(2) Register the dropdown handle, e.g.
* Set listbox for available source systems (according to
* SOM Customizing and selection on selection screen)
CLEAR l_wa_drop.
l_wa_drop-handle = c_drdn_handle_logsys.
LOOP AT me->mt_rfc_check INTO l_wa_rfccheck.
    l_wa_drop-value = l_wa_rfccheck-logsys.
    APPEND l_wa_drop TO lt_drop.
ENDLOOP.
CALL METHOD me->mo_alvgrid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_drop.
Regards
Uwe

Similar Messages

Event for the List Box in ALV Grid Control

Hello,
I have the below urgent requirment.
I have an ALV Grid Control built using ABAP Objects. In the grid, I have few fields and one of these fields is a List Box. Depending on the values selected, I need to enable or disable some fields. So, is there any event for the List box in ALV Grid Control.
For ex: I have 2 Fields, Designation and Commission. The designation field is a List Box field having 'Software Engineer' and 'Manager' as values. When I select 'Software Engineer', the commission field should be disabled. When I select 'Manager', the comission field should be enabled.
Early reply is hightly appreciated.
Priya

REPORT ZTEST1234 MESSAGE-ID ZZ .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C,
 V_FLAG,
 V_DATA_CHANGE,
 V_ROW TYPE LVC_S_ROW,
 V_COLUMN TYPE LVC_S_COL,
 V_ROW_NUM TYPE LVC_S_ROID.
DATA: OK_CODE LIKE SY-UCOMM,
 SAVE_OK LIKE SY-UCOMM,
 G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
 GS_LAYOUT TYPE LVC_S_LAYO.
DATA:BEGIN OF ITAB OCCURS 0,
 VBELN LIKE LIKP-VBELN,
 POSNR LIKE LIPS-POSNR,
 COMISN(10),
 CELLCOLOR TYPE LVC_T_SCOL, "required for color
 DROP(20),
 HANDLE_STYLE TYPE LVC_T_STYL,
 END OF ITAB.
* CLASS lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
 METHODS:
**Hot spot Handler
 HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
**Handler to Check the Data Change
 HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
 OF CL_GUI_ALV_GRID
 IMPORTING ER_DATA_CHANGED
 E_ONF4
 E_ONF4_BEFORE
 E_ONF4_AFTER,
**Double Click Handler
 HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW E_COLUMN ES_ROW_NO.
ENDCLASS. "lcl_event_handler DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Handle Hotspot Click
METHOD HANDLE_HOTSPOT_CLICK .
 CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
 V_ROW = E_ROW_ID.
 V_COLUMN = E_COLUMN_ID.
 V_ROW_NUM = ES_ROW_NO.
 MESSAGE I000 WITH V_ROW 'clicked'.
ENDMETHOD. "lcl_event_handler
*Handle Double Click
METHOD HANDLE_DOUBLE_CLICK.
ENDMETHOD. "handle_double_click
**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
 DATA: X_CHANGE TYPE LVC_S_MODI,
 X_FINAL TYPE ITAB,
 L_FLAG,
 LS_OUTTAB LIKE LINE OF ITAB.
 DATA: LS_EDIT TYPE LVC_S_STYL,
 LT_EDIT TYPE LVC_T_STYL.
 LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
 IF X_CHANGE-FIELDNAME = 'DROP' AND X_CHANGE-VALUE = 'S/W ENGINEER'.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 else.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 ENDIF.
 ENDLOOP.
 CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
 EXCEPTIONS
 FINISHED = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDMETHOD. "HANDLE_DATA_CHANGED
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
*& Global Definitions
DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
 G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
*- Fieldcatalog for First and second Report
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
 X_FIELDCAT TYPE LVC_S_FCAT,
 LS_VARI TYPE DISVARIANT.
* START-OF_SELECTION
START-OF-SELECTION.
SELECT VBELN
 POSNR
 FROM LIPS
 UP TO 20 ROWS
 INTO CORRESPONDING FIELDS OF TABLE ITAB.
END-OF-SELECTION.
IF NOT ITAB[] IS INITIAL.
 CALL SCREEN 100.
ELSE.
 MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
*& Form CREATE_AND_INIT_ALV
* text
FORM CREATE_AND_INIT_ALV .
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
CREATE OBJECT G_CUSTOM_CONTAINER
 EXPORTING CONTAINER_NAME = G_CONTAINER1.
CREATE OBJECT G_GRID
 EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
* Set a titlebar for the grid control
CLEAR GS_LAYOUT.
GS_LAYOUT-GRID_TITLE = TEXT-003.
 GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
GS_LAYOUT-ZEBRA = SPACE.
GS_LAYOUT-CWIDTH_OPT = 'X'.
GS_LAYOUT-NO_ROWMARK = 'X'.
GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
 CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
 SET HANDLER G_HANDLER->HANDLE_DATA_CHANGED FOR G_GRID.
DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
DATA: L_INDEX TYPE SY-TABIX.
"Here i am changing the color of line 1,5,10...
"so you can change the color of font conditionally
LOOP AT ITAB.
 L_INDEX = SY-TABIX.
 IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
 LS_CELLCOLOR-FNAME = 'VBELN'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 LS_CELLCOLOR-FNAME = 'POSNR'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 ENDIF.
ENDLOOP.
* setting focus for created grid control
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
 EXPORTING
 CONTROL = G_GRID.
* Build fieldcat and set editable for date and reason code
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM BUILD_FIELDCAT.
PERFORM SET_DRDN_TABLE.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
**Vaiant to save the layout
LS_VARI-REPORT = SY-REPID.
LS_VARI-HANDLE = SPACE.
LS_VARI-LOG_GROUP = SPACE.
LS_VARI-USERNAME = SPACE.
LS_VARI-VARIANT = SPACE.
LS_VARI-TEXT = SPACE.
LS_VARI-DEPENDVARS = SPACE.
CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
**Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
 IS_VARIANT = LS_VARI
 IS_LAYOUT = GS_LAYOUT
 I_SAVE = 'A'
 CHANGING
 IT_FIELDCATALOG = IT_FIELDCAT
 IT_OUTTAB = ITAB[].
* Set editable cells to ready for input initially
CALL METHOD G_GRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* -->PT_EXCLUDE text
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form build_fieldcat
* Fieldcatalog
FORM BUILD_FIELDCAT .
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-HOTSPOT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Item'(025).
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
X_FIELDCAT-FIELDNAME = 'DROP'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-DRDN_HNDL = '1'.
X_FIELDCAT-DRDN_ALIAS = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Comissn'(025).
X_FIELDCAT-FIELDNAME = 'COMISN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-EDIT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM. " build_fieldcat
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL.
**Initializing the grid and calling the fm to Display the O/P
 PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form SET_DRDN_TABLE
* text
FORM SET_DRDN_TABLE.
DATA:LT_DRAL TYPE LVC_T_DRAL,
 LS_DRAL TYPE LVC_S_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'S/W Engineer'.
LS_DRAL-INT_VALUE = 'S/W Engineer'.
APPEND LS_DRAL TO LT_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'Manager'.
LS_DRAL-INT_VALUE = 'Manager'.
APPEND LS_DRAL TO LT_DRAL.
**Setting the Drop down table for Reason Code
CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
 EXPORTING
 IT_DROP_DOWN_ALIAS = LT_DRAL.
ENDFORM. " set_drdn_table
Regards
vijay

List box in alv grid control through slis and reuse_alv grid_display metho

hello,
i want to display list box in one column of alv by slis method.can u suggest me how to do it?
neon

Hi,
plz check below code :
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
 g_custom_container TYPE REF TO cl_gui_custom_container,
 gt_fieldcat TYPE lvc_t_fcat,
 gs_layout TYPE lvc_s_layo.
*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
 wa_outtab TYPE t517a.
*initialisation event
INITIALIZATION.
*Start of selection event
START-OF-SELECTION.
*Call to ALV
CALL SCREEN 600.
*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
 MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
set pf-status 'xxx'.
set titlebar 'MAIN100'.
Subroutine to display the output in alv
PERFORM alv_output.
ENDMODULE. "pbo OUTPUT
PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and
based on the user command we can do the coding.
 MODULE PAI INPUT *
MODULE pai INPUT.
ENDMODULE. "pai INPUT
*& Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = 'T517A'
 CHANGING
 ct_fieldcat = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
 CASE ls_fcat-fieldname.
 WHEN 'SLART'.
*drdn-hndl = '1' is the first list box
 ls_fcat-drdn_hndl = '1'.
 ls_fcat-outputlen = 15.
 MODIFY gt_fieldcat FROM ls_fcat.
*drdn-hndl = '2' is the second list box
 WHEN 'ABART'.
 ls_fcat-drdn_hndl = '2'.
 ls_fcat-outputlen = 15.
 MODIFY gt_fieldcat FROM ls_fcat.
 ENDCASE.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form ALV_OUTPUT
FORM alv_output .
*Create object for container
CREATE OBJECT g_custom_container
 EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
 EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout
 CHANGING
 it_fieldcatalog = gt_fieldcat
 it_outtab = gt_outtab.
ENDFORM. "ALV_OUTPUT
*& Form dropdown_table
 text
--> p1 text
<-- p2 text
FORM dropdown_table.
*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
 ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.
Second ABART listbox (handle '2').
ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.
*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
 EXPORTING
 it_drop_down = lt_dropdown.
ENDFORM. " dropdown_table
*& Form build_layout
 text
*layout for ALV output
FORM build_layout .
gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.
ENDFORM. " build_layout
reference : wiki.

Handling list box in alv

hai all
please check the code and tell how i can call in both open and close sales orders
NAME = 'CATEGORY'.
VALUE-KEY = 'OPEN'.
VALUE-TEXT = 'OPEN'.
APPEND VALUE TO LIST.
VALUE-KEY = 'CLOSE'.
VALUE-TEXT = 'CLOSE'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      ID     = NAME
      VALUES = LIST.

Reported to SCN Moderators for multiple postings:
handling list box in alv
The specified item was not found.
pk

How to get check box in alv grid list output

hi gurus,
can anyone inform me
how to get check box in alv output it should not be a pop up window
thank you
regards
kals.

or
hi go through the fallowing code.
code*&----
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
text
--> p1 text
<-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
text
--> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE.[/code]

How to create command button called 'Remarks' and Check box in ALV GRID?

Hi, Experts,
Requirement is: in the ALVE GRID report output, user select a record by clicking the check box and pressing the button 'Remarks' it will take me into other transaction from the output list.
Please help me out.
Reward points.
Sekhar

Hi Chandra Shekar,
Check the following sample program. 2 things to remember.
1. Check the callback subroutine PF_STATUS_SET and create PF status for the program.and also ur REMARKS button in the application tool. Comments are made every where wherever those are needed. After creating Pf status execute the report.
2.Once you select records by selecting checkboxes, u have to press on Refresh button( that is there on application toolbar), then only for selected records, CHECK field in the internal is updated. After that press on REMARKS button .
REPORT zvenkat_alv_grid.
TABLES:t001.
"Types
TYPES:
 BEGIN OF t_1001,
 check TYPE c,
 bukrs TYPE t001-bukrs,
 butxt TYPE t001-butxt,
 ort01 TYPE t001-ort01,
 land1 TYPE t001-land1,
 END OF t_1001.
"Work area
DATA:
 w_t001 TYPE t_1001.
"Internal table
DATA:
 i_t001 TYPE STANDARD TABLE OF t_1001.
" ALV Declarations
* Types Pools
TYPE-POOLS:
 slis.
* Types
TYPES:
 t_fieldcat TYPE slis_fieldcat_alv,
 t_events TYPE slis_alv_event,
 t_layout TYPE slis_layout_alv.
* Workareas
DATA:
 w_fieldcat TYPE t_fieldcat,
 w_events TYPE t_events,
 w_layout TYPE t_layout.
* Internal Tables
DATA:
 i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
 i_events TYPE STANDARD TABLE OF t_events.
*& start of selection
START-OF-SELECTION.
 PERFORM get_data.
*& end-of-selection.
END-OF-SELECTION.
 PERFORM build_fieldcatlog.
 PERFORM build_events.
 PERFORM build_layout.
 PERFORM list_display.
*& Form get_data
FORM get_data .
 SELECT bukrs
 butxt
 ort01
 land1
 FROM t001
 INTO CORRESPONDING FIELDS OF TABLE i_t001
 UP TO 30 ROWS.
ENDFORM. " get_data
*& Form build_fieldcatlog
FORM build_fieldcatlog .
 CLEAR:w_fieldcat,i_fieldcat[].
 PERFORM build_fcatalog USING:
 'CHECK' 'I_T001' ' ',
 'BUKRS' 'I_T001' 'BUKRS',
 'BUTXT' 'I_T001' 'BUTXT',
 'ORT01' 'I_T001' 'ORT01',
 'LAND1' 'I_T001' 'LAND1'.
ENDFORM. "BUILD_FIELDCATLOG
*& Form BUILD_FCATALOG
FORM build_fcatalog USING l_field l_tab l_text.
 w_fieldcat-fieldname = l_field.
 w_fieldcat-tabname = l_tab.
 w_fieldcat-seltext_m = l_text.
 IF l_field = 'CHECK'..
 w_fieldcat-checkbox = 'X'.
 w_fieldcat-edit = 'X'.
 ENDIF.
 APPEND w_fieldcat TO i_fieldcat.
 CLEAR w_fieldcat.
ENDFORM. " build_fieldcatlog
*& Form build_events
* text
FORM build_events.
 CLEAR :
 w_events, i_events[].
 w_events-name = 'TOP_OF_PAGE'."Event Name
 w_events-form = 'TOP_OF_PAGE'."Callback event subroutine
 APPEND w_events TO i_events.
 CLEAR w_events.
 w_events-name = 'USER_COMMAND' .
 w_events-form = 'USER_COMMAND' .
 APPEND w_events TO i_events.
 CLEAR w_events.
 w_events-name = 'PF_STATUS_SET' .
 w_events-form = 'PF_STATUS_SET' .
 APPEND w_events TO i_events.
 CLEAR w_events.
ENDFORM. "build_events
*& Form build_layout
FORM build_layout .
 w_layout-colwidth_optimize = 'X'.
 w_layout-zebra = 'X'.
ENDFORM. " build_layout
*& Form list_display
FORM list_display .
 DATA:
 l_program TYPE sy-repid.
 l_program = sy-repid.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_program
 is_layout = w_layout
 it_fieldcat = i_fieldcat
 it_events = i_events
 TABLES
 t_outtab = i_t001
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDFORM. " list_display
*& Form top_of_page
FORM top_of_page.
 DATA :
 li_header TYPE slis_t_listheader,
 w_header LIKE LINE OF li_header.
 DATA:
 l_date TYPE char10.
 WRITE sy-datum TO l_date.
 w_header-typ = 'H'.
 CONCATENATE sy-repid ':' 'From Date' l_date INTO w_header-info SEPARATED BY space.
 APPEND w_header TO li_header.
 CLEAR w_header.
 w_header-typ = 'S'.
 w_header-info = sy-title.
 APPEND w_header TO li_header.
 CLEAR w_header.
 w_header-typ = 'A'.
 w_header-info = sy-uname.
 APPEND w_header TO li_header.
 CLEAR w_header.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = li_header.
ENDFORM. "top_of_page
*& Form pf_status_set
FORM pf_status_set USING extab TYPE slis_t_extab.
 "Procedure to set own pf-status.
 "1.Goto Transaction code SE41
 "2.give program = SAPLKKBL and status = STANDARD_FULLSCREEN.
 "3.Click on Application toolbar STATUS button
 "4.Give ur program name Status name that is to be used in the program using SET pf-status statement
 "5.Create ur button REMARKS.
 SET PF-STATUS 'STATUS1' EXCLUDING extab.
ENDFORM. "pf_status_set
*& Form user_command
FORM user_command USING ucomm LIKE sy-ucomm
 selfield TYPE slis_selfield.
 CASE ucomm .
 WHEN 'REMARKS'."When u click on remarks button.
 LOOP AT i_t001 INTO w_t001 WHERE check = 'X'.
 WRITE :/ w_t001-bukrs, 'Checked'.
 ENDLOOP.
 ENDCASE.
ENDFORM. "user_command
I hope that it helps u .
Regards,
Venkat.O

Check Boxes in ALV Grid

Hi,
I want to display an ALV grid/ list report with a check box at the begining of each row.
I want to select some or all check boxes.
Based on the selection, i need to perform some action (like z table update).
Can u plz send the sample code to meet this requirement.
Thanks

Hi..
I had developed this code long time it uses container and its working
*& Report ZHR_REPT_EMP_NOT_PBOOKED
*& Program title: List of employees who have not done Pre-Booking and
* Provision to send E mail to such employees
*& Description: To display a list of emloyees in report and then sending mails to them
REPORT ZHR_REPT_EMP_NOT_PBOOKED.
TYPE-POOLS slis.
*-----------tables
TABLES: pernr,
 pa0001,
 hrp1001,
 hrp1000,
 zodtab,
 zcstab,
 zsbutab.
*-----------Infotypes
INFOTYPES :0001, "org assignment,
 1001,
 1000,
 0105.
TYPES : BEGIN OF i_conf,
 checkbox ,
 pernr TYPE pa0001-pernr, "personnel Number.
 ename TYPE pa0001-ename, "Name of Employee.
 zzbtc TYPE pa0001-zzbtc, "Band.
 btrtl TYPE pa0001-btrtl, "Grade
 Location type string,
 persk type string,
 ptext type string,
 werks TYPE p0001-werks,
 zzod_txt type string, "OD name
 zzod type pa0001-zzod,
 zzcs type string, "cluster/sector
 vertical type string,
 sbu LIKE pa0001-zzsbu, "SBU
 sbutxt LIKE zsbutab-zsbutxt, "SBUTXT
 orgeh LIKE pa0001-orgeh, "Vertical
 org_text type string,
 zzbloc LIKE pa0001-zzbloc, "base location
 dept_loc type string, "dept loc
 ename_s LIKE pa0001-ename, "Department
 zztc LIKE pa0001-zztc,
 endda type p0001-endda,
 celltab type lvc_t_styl,
 END OF i_conf.
DATA : it_conf TYPE STANDARD TABLE OF i_conf WITH HEADER LINE,
 wa_conf TYPE i_conf.
*data: begin of gs_outtab.
*data: checkbox type c. "field for checkbox
** §B1.Extend your output table by a field to dis- or enable
** cells for input.
*data: celltab type lvc_t_styl. "field to switch editability
* include structure i_conf.
*data: end of gs_outtab.
*data: gt_outtab type gs_outtab occurs 0 with header line.
*& DATA DECLARATION FOR EMAIL
DATA: docdata TYPE sodocchgi1,
 objpack TYPE STANDARD TABLE OF sopcklsti1 WITH HEADER LINE,
 objhead TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,
 objtxt TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,
 objbin TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,
 reclist TYPE STANDARD TABLE OF somlreci1 WITH HEADER LINE.
DATA: tab_lines TYPE sy-tabix.
DATA : p_1001 TYPE TABLE OF p1001 WITH HEADER LINE.
DATA : p_0001 TYPE TABLE OF p0001 WITH HEADER LINE.
DATA : p_0105 TYPE TABLE OF p0105 WITH HEADER LINE.
DATA : od TYPE p0001-zzod.
DATA : new_pernr type p0001-pernr.
DATA : pernr_s type p0001-pernr.
DATA : email_s type p0105-USRID_LONG.
DATA : email type p0105-USRID_LONG.
DATA : tc_name type string.
DATA : tc_num type string.
DATA : emails type string.
DATA : sel_all type string.
DATA: REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA : flag type i.
DATA : title TYPE string.
DATA : pernr_temp tYPE p0001-pernr.
DATA : rel type string.
DATA : stat type string.
DATA : count type i.
DATA : v_dynnr type sy-dynnr.
DATA : g_grid type ref to cl_gui_alv_grid.
DATA : g_custom_container type ref to cl_gui_custom_container,
 g_container type scrfname value 'CC'.
*************field cat********************************
DATA: fieldcat TYPE lvc_t_fcat,
 wa_fieldcat LIKE LINE OF fieldcat.
DATA: gd_layout TYPE lvc_s_layo,
 gd_repid TYPE sy-repid.
DATA:gt_events TYPE slis_t_event,
 gt_list_top_of_page TYPE slis_t_listheader.
DATA rec_fetched TYPE sy-tabix.
CONSTANTS g_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_zzod FOR zsbutab-zod NO INTERVALS ,
 s_btrtl FOR pa0001-btrtl NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
start-of-selection.
if pn-begda is initial.
 pn-begda = '18000101'.
endif.
if pn-endda is initial.
 pn-begda = '99991230'.
endif.
clear : it_conf,it_conf[].
get pernr.
clear new_pernr.
move pernr-pernr to new_pernr.
**************checking whether employee has booked or prebooked for any event****************
clear: p_1001,p_1001[].
perform read_info tables p_1001 using new_pernr '1' 'B027' .
IF SY-SUBRC <> 0.
 clear: p_1001,p_1001[].
 perform read_info tables p_1001 using new_pernr '1' 'B023' .
 IF SY-SUBRC <> 0.
 clear: p_1001,p_1001[].
 perform read_info tables p_1001 using new_pernr '2' 'B027' .
 IF SY-SUBRC <> 0.
 clear: p_1001,p_1001[].
 perform read_info tables p_1001 using new_pernr '2' 'B023' .
 IF SY-SUBRC <> 0.
 clear : p_0001,p_0001[].
 CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = new_pernr
 infty = '0001'
 BEGDA = pn-begda
 ENDDA = pn-endda
 TABLES
 infty_tab = p_0001
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
 sort p_0001 descending by begda.
 read table p_0001 index 1.
 move p_0001-pernr to wa_conf-pernr.
 move p_0001-ename to wa_conf-ename.
 move p_0001-zzbtc to wa_conf-zzbtc.
 move p_0001-btrtl to wa_conf-btrtl.
 move p_0001-werks to wa_conf-werks.
 move p_0001-zzsbu to wa_conf-sbu.
 move p_0001-orgeh to wa_conf-orgeh.
 move p_0001-zzbloc to wa_conf-zzbloc.
 move p_0001-zztc to wa_conf-zztc.
 move p_0001-zzod to wa_conf-zzod.
 move p_0001-endda to wa_conf-endda.
 move p_0001-btrtl to wa_conf-btrtl.
***************clustor txt**********************
 select single zcstxt into wa_conf-zzcs from zcstab
 where zcs = p_0001-zzcs
 and zod = p_0001-zzod.
***********operating division*******************************
 select single ZODLTXT into wa_conf-zzod_txt from zodtab
 where zod = wa_conf-zzod.
***********sbu txt***************************************************************
 select single zsbutxt into wa_conf-sbutxt from zsbutab
 where zsbu = wa_conf-sbu.
***********location**************************************
 select single btext into wa_conf-location from t001p
 where btrtl = wa_conf-btrtl
 and werks = wa_conf-werks.
***********Dept*********************************************
 select single orgtx into wa_conf-org_text from t527x
 where sprsl = 'EN'
 and orgeh = wa_conf-orgeh
 and begda <= p_0001-begda
 and endda >= p_0001-begda.
***************grade******************************************
 SELECT SINGLE ptext FROM t503t INTO wa_conf-persk
 WHERE sprsl = 'EN'
 AND persk = p_0001-persk .
********************vertical*****************************
select single zverttxt into wa_conf-vertical from zvtab
 where zvert = p_0001-zzvert.
********deputation location******************
if p_0001-ZZDEPFLG = 'X'.
 select single zdltxt into wa_conf-dept_loc from zdltab where zdl = p_0001-zzdploc.
endif.
***get imm superior
 CALL FUNCTION 'ZHR_GET_IMMMED_SUPERIOR'
 EXPORTING
 pernr = new_pernr
* begda = '18000101'
* endda = '99991231'
 IMPORTING
 v_pernr = pernr_s
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 if sy-subrc = 0.
** find the email of the immed. superiors personal number..
 clear : p_0001,p_0001[].
 CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = pernr_s
 infty = '0001'
 BEGDA = pn-begda
 ENDDA = pn-endda
 TABLES
 infty_tab = p_0001
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
 read table p_0001 index 1.
 move p_0001-ename to wa_conf-ename_s.
 endif.
 if wa_conf-btrtl in s_btrtl and wa_conf-zzod in s_zzod .
 append wa_conf to it_conf.
 endif.
 endif.
 endif.
 endif.
endif.
clear wa_conf.
end-of-selection.
 if it_conf[] is initial.
 MESSAGE i501(zmod).
 exit.
 endif.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'USER'.
* SET TITLEBAR 'xxx'.
if g_custom_container is initial.
 data: lt_exclude type ui_functions.
 create object g_custom_container
 EXPORTING
 container_name = g_container.
 create object g_grid
 EXPORTING
 i_parent = g_custom_container.
 perform fieldcat_build .
* Exclude all edit functions in this example since we do not need them:
 perform exclude_tb_functions changing lt_exclude.
* perform build_data.
*§ B3.Use the layout structure to aquaint additional field to ALV.
 gd_layout-stylefname = 'CELLTAB'.
 PERFORM build_layout.
 if it_conf[] is initial.
* MESSAGE i501(zmod). "No data exists
 else.
 call method g_grid->set_table_for_first_display
 EXPORTING
 is_layout = gd_layout
 it_toolbar_excluding = lt_exclude
 CHANGING
 it_fieldcatalog = fieldcat
 it_outtab = it_conf[].
* create object g_event_receiver.
* set handler g_event_receiver->catch_doubleclick for g_grid.
* Set editable cells to ready for input initially
 call method g_grid->set_ready_for_input
 EXPORTING
 i_ready_for_input = 1.
 endif.
endif.
ENDMODULE. " STATUS_0100 OUTPUT
*call screen 100.
*& Form build_layout
FORM build_layout.
CLEAR gd_layout.
v_dynnr = 100.
gd_layout-cwidth_opt = 'X'.
* gd_layout-zebra = 'X'.
* gd_layout-grid_title = text-002.
ENDFORM. "build_layout
*& Form exclude_tb_functions
* text
* -->PT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
endform. "exclude_tb_functions
*& Form field_cat
* text
FORM fieldcat_build .
wa_fieldcat-fieldname = 'CHECKBOX'.
wa_fieldcat-tabname = 'IT_CONF'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-edit = 'X'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'PERNR'.
wa_fieldcat-coltext = 'P.S. No'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ENAME'.
wa_fieldcat-coltext = 'Employee Name'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ZZBTC'.
wa_fieldcat-coltext = 'Band'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'PERSK'.
wa_fieldcat-coltext = 'Grade'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ZZOD'.
wa_fieldcat-coltext = 'OD Name'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ZZCS'.
wa_fieldcat-coltext = 'Cluster / Sector '.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
 wa_fieldcat-fieldname = 'VERTICAL'.
wa_fieldcat-coltext = 'Vertical'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'SBUTXT'.
wa_fieldcat-coltext = 'SBU'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ORG_TEXT'.
wa_fieldcat-coltext = 'Dept.'.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'LOCATION'.
wa_fieldcat-coltext = 'Empl. Base Location '.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
 wa_fieldcat-fieldname = 'DEPT_LOC'.
wa_fieldcat-coltext = 'Empl. Deputation Location '.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ENAME_S'.
wa_fieldcat-coltext = 'IS Name '.
wa_fieldcat-tabname = 'IT_CONF'.
APPEND wa_fieldcat TO fieldcat.
clear wa_fieldcat.
endform. "field_cat
*& Form check_lock
* text
* -->PS_OUTTAB text
* -->P_LOCKED text
form check_lock using ps_outtab type i_conf
 changing p_locked.
data ls_celltab type lvc_s_styl.
loop at ps_outtab-celltab into ls_celltab.
 if ls_celltab-fieldname = 'CHECKBOX'.
 if ls_celltab-style eq cl_gui_alv_grid=>mc_style_disabled.
 p_locked = 'X'.
 else.
 p_locked = space.
 endif.
 endif.
endloop.
endform. "check_lock
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
IF sy-ucomm = 'EMAIL'.
 clear it_conf.
* CALL METHOD g_grid->refresh_table_display.
 data: ls_outtab type i_conf.
 data: l_valid type c,
 l_locked type c.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
* you must check the input cells.
* If all entries are ok, ALV transferes new values to the output
* table which you then can modify.
 call method g_grid->check_changed_data
 IMPORTING
 e_valid = l_valid.
 if l_valid eq 'X'.
 loop at it_conf into ls_outtab.
 if not ls_outtab-checkbox is initial
 and not ls_outtab-checkbox eq '-'.
***************************sending mail to employee and his/her superior************************************
 select single sachn telnr into (tc_name , tc_num) from t526
 where SACHX = it_conf-zztc
 and werks = it_conf-werks .
* ******find the emil of employee.
 clear : p_0105,p_0105[].
 CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = ls_outtab-pernr
 infty = '0105'
 BEGDA = pn-begda
 ENDDA = pn-endda
 TABLES
 infty_tab = p_0105
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
 if sy-subrc = 0.
 read table p_0105 with key subty = '0010'.
 move p_0105-USRID_LONG to email.
 endif.
** find immediate superior by Z FM.
 clear pernr_s.
 CALL FUNCTION 'ZHR_GET_IMMMED_SUPERIOR'
 EXPORTING
 pernr = ls_outtab-pernr
 IMPORTING
 v_pernr = pernr_s
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 if sy-subrc = 0.
** find the email of the immed. superiors personal number..
 clear : p_0105,p_0105[].
 CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = pernr_s
 infty = '0105'
 BEGDA = pn-begda
 ENDDA = pn-endda
 TABLES
 infty_tab = p_0105
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
 read table p_0105 with key subty = '0010'.
 move p_0105-USRID_LONG to email_s.
 endif.
 if email <> ' '.
 count = 1.
 perform send_mail using ls_outtab-ename email email_s tc_name tc_num count .
 endif.
 if email_s <> ' '.
 count = 2.
 perform send_mail using ls_outtab-ename email email_s tc_name tc_num count.
 endif.
 call method g_grid->refresh_table_display.
 modify it_conf from ls_outtab.
 endif.
 endloop.
 call method g_grid->refresh_table_display.
 endif.
 set screen 100.
endif.
***************************end of sending mail*****************************************************
IF sy-ucomm = 'SELECT'.
* CALL METHOD g_grid->refresh_table_display.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
* you must check the input cells.
* If all entries are ok, ALV transferes new values to the output
* table which you then can modify.
 call method g_grid->check_changed_data
 IMPORTING
 e_valid = l_valid.
 if l_valid eq 'X'.
 loop at it_conf into ls_outtab.
 perform check_lock using ls_outtab
 changing l_locked.
 if l_locked is initial
 and not ls_outtab-checkbox eq '-'.
 ls_outtab-checkbox = 'X'.
 endif.
 modify it_conf from ls_outtab.
 endloop.
 call method g_grid->refresh_table_display.
 endif.
 set screen 100.
endif.
IF sy-ucomm = 'BCK' and v_dynnr = 100.
 clear v_dynnr.
 set screen 1000.
 leave screen. " 0."1000.
**call selection-screen 1000.
*call screen 1000.
endif.
IF sy-ucomm = 'EXIT' and v_dynnr = 100.
 clear v_dynnr.
 leave program.
endif.
IF sy-ucomm = 'CANC' and v_dynnr = 100.
 clear v_dynnr.
 leave program.
endif.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form send_mail
* text
* -->EMAIL_S text
* -->EMAIL text
* -->TC_NAME text
* -->TC_NUM text
form send_mail using ename email email_s tc_name tc_num count.
* *Body of mail
CLEAR objtxt.
CLEAR objtxt[].
objtxt = text-005.
concatenate objtxt ename into objtxt separated by space.
append objtxt.
clear objtxt.
objtxt = text-006.
concatenate objtxt email_s into objtxt separated by space.
append objtxt.
clear objtxt.
append objtxt.
objtxt = text-002.
append objtxt.
clear objtxt.
objtxt = text-003.
append objtxt.
clear objtxt.
append objtxt.
objtxt = text-004.
concatenate objtxt tc_name 'at' tc_num into objtxt separated by space.
append objtxt.
clear objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
*Mail description
CLEAR docdata.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
docdata-obj_name = 'Reminder'.
docdata-obj_descr = 'REMINDER TO DO PRE-BOOKING'.
docdata-obj_langu = sy-langu.
*Packing list for main document
CLEAR objpack.
CLEAR objpack[].
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
*Email receiver's list
CLEAR reclist.
CLEAR reclist[].
if count = 1.
* reclist-receiver = 'email address'."put email add here
 reclist-receiver = email.
else.
 reclist-receiver = email_s.
endif.
reclist-rec_type = 'U'.
APPEND reclist.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = docdata
 document_type = 'RAW'
 put_in_outbox = 'X'
 commit_work = 'X'
 TABLES
 object_content = objtxt
 receivers = reclist
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 OTHERS = 8.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. "send_mail
*& Form eventtab_build
FORM eventtab_build USING rt_events TYPE slis_t_event.
*Registration of events to happen during list display
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = rt_events.
READ TABLE rt_events WITH KEY name = slis_ev_top_of_page INTO ls_event.
IF sy-subrc = 0.
 MOVE g_top_of_page TO ls_event-form.
 APPEND ls_event TO rt_events.
ENDIF.
ENDFORM. "eventtab_build
*& Form top_of_page
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_list_top_of_page.
ENDFORM. "top_of_page
*& Form COMMENT_BUILD
FORM comment_build USING lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader,
 rp_date TYPE string. "report date
* LIST HEADING LINE: TYPE H
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO lt_top_of_page.
CONCATENATE sy-datum+6(2) sy-datum+4(2) sy-datum(4) INTO rp_date SEPARATED BY '.'.
* STATUS LINE: TYPE S
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = rp_date.
APPEND ls_line TO lt_top_of_page.
ENDFORM. "comment_build
*& Form read_info
* text
* -->P_1001 text
* -->PERNR text
* -->STAT text
* -->REL text
form read_info tables p_1001 using pernr stat rel.
CALL FUNCTION 'RH_READ_INFTY_1001'
 EXPORTING
 AUTHORITY = 'DISP'
 WITH_STRU_AUTH = 'X'
 PLVAR = '01'
 OTYPE = 'P'
 OBJID = pernr
 ISTAT = stat
 SUBTY = rel
 BEGDA = pn-begda
 ENDDA = pn-endda
 TABLES
 I1001 = p_1001
 EXCEPTIONS
 NOTHING_FOUND = 1
 WRONG_CONDITION = 2
 WRONG_PARAMETERS = 3
 OTHERS = 4.
endform. "read_info
*& Module BACK INPUT
* text
MODULE BACK INPUT.
IF SY-UCOMM = 'E'.
 leave program.
endif.
IF SY-UCOMM = 'ENDE'.
 leave program.
endif.
IF SY-UCOMM = 'ECAN'.
 leave program.
endif.
ENDMODULE. " BACK INPUT
regards
vivek

Problem with check box in ALV Grid Display

I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!

Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
 ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
 WHERE ( chkbox = 'X' ).
 ld_idx = syst-tabix.
 " Call your update function / method / perform
 ls_outtab-chkbox = space.
 MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
 TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe

Check box in ALV grid gets unselected for new selection

Hi all,
This is my code :
TYPE-POOLS : slis.
Variable
DATA: g_repid LIKE sy-repid,
 g_title TYPE lvc_title,
 g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
 g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
 g_layout TYPE slis_layout_alv,
 g_print_alv TYPE slis_print_alv,
 g_variant LIKE disvariant,
 c_char_a(1) VALUE 'A',
 c_char_x(1) VALUE 'X',
 itab_alv_sort TYPE slis_t_sortinfo_alv,
 itab_alv_fcat TYPE slis_t_fieldcat_alv,
 fm_name type rs38l_fnam," Function Module Name
* l_sfctrlparams LIKE ssfctrlop, " Form Print Parameter
* l_sfoutopt LIKE ssfcompop,
 pri_params LIKE pri_params,
 c_x type c .
* Internal tables Begin with IT_ *
DATA : it_fcat TYPE SLIS_T_FIELDCAT_ALV, "---ALV
 it_disp type table of ZLOI.
* Work Area for Internal tables Begin with WA_ *
data : wa_fcat TYPE slis_fieldcat_alv , "---ALV
 wa_layout TYPE lvc_s_layo, "---ALV
 wa_it_disp like line of it_disp.
* Objects *
DATA : cref TYPE REF TO cl_gui_custom_container, "---ALV
 gref TYPE REF TO cl_gui_alv_grid. "---ALV
* Start-of-selection
Start-of-selection.
perform fetch_po_det.
perform build_fcat.
perform alv_display.
*& Form FETCH_PO_DET
* text
* --> p1 text
* <-- p2 text
FORM FETCH_PO_DET .
data : it_po type table of crmd_orderadm_h,
 wa_po like line of it_po,
 wa_header type BBP_PDS_PO_HEADER_D.
select guid
 object_id
 DESCRIPTION
 POSTING_DATE
 CREATED_BY
from crmd_orderadm_h
into corresponding fields of table it_po
where object_type = 'BUS2201'.
loop at it_po into wa_po.
 move wa_po-object_id to wa_it_disp-ZZPONO.
 move wa_po-DESCRIPTION to wa_it_disp-ZZPODESC.
 move wa_po-posting_date to wa_it_disp-ZZPODATE.
 move wa_po-created_by to wa_it_disp-ZZPOCREATOR.
 CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
 EXPORTING
 I_OBJECT_ID = wa_it_disp-zzpono
 IMPORTING
 E_HEADER = wa_header.
 move wa_header-total_value to wa_it_disp-ZZPOVAL.
 move wa_header-currency to wa_it_disp-ZZPOCUR.
 append wa_it_disp to it_disp.
endloop.
* write : wa_it_disp-zzpono.
ENDFORM. " FETCH_PO_DET
*& Form BUILD_FCAT
* text
* --> p1 text
* <-- p2 text
FORM BUILD_FCAT .
g_repid = sy-repid.
g_title = 'LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
*g_layout-box_tabname = 'ITAB_REPORT'.
*Check box
wa_fcat-fieldname = 'ZZCHECK'.
wa_fcat-checkbox = 'X'.
wa_fcat-outputlen = '1'.
wa_fcat-col_pos = '1'.
wa_fcat-edit = '1'.
wa_fcat-seltext_m = 'No'.
append wa_fcat to it_fcat.
*Po no
clear wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
* wa_fcat-seltext = 'Purchase Order'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Desc
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Postign date
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
append wa_fcat to it_fcat.
*value
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
append wa_fcat to it_fcat.
*Currency
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
append wa_fcat to it_fcat.
*Creator
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
append wa_fcat to it_fcat.
ENDFORM. " BUILD_FCAT
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM ALV_DISPLAY .
sort it_disp by ZZPONO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = g_repid
 I_CALLBACK_PF_STATUS_SET = g_set_pf_stat
 I_CALLBACK_USER_COMMAND = g_user_command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
 I_GRID_TITLE = g_title
* I_GRID_SETTINGS =
 IS_LAYOUT = g_layout
 IT_FIELDCAT = it_fcat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
 IS_VARIANT = g_variant
* IT_EVENTS =
* IT_EVENT_EXIT =
 IS_PRINT = g_print_alv
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = it_disp[]
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
CASE R_UCOMM.
 WHEN 'PRINT'.
 READ TABLE IT_disp INTO WA_IT_DISP WITH KEY ZZCHECK = 'X'.
 IF SY-SUBRC EQ 0.
 loop at it_DISP INTO WA_IT_DISP.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TEXT_QUESTION = 'Print the LOI details?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'.
* IMPORTING
* ANSWER = w_answer.
 IF SY-SUBRC 0.
 ENDIF.
* PERFORM CALL_SF.
 endloop.
 ENDIF.
 WHEN 'BACK'.
 LEAVE PROGRAM.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM. "set_pf_status
Now in my ALV grid o/p i can see the check box but if i select one row and then try to slect another the first one gets deselected.
Can anybody tell me what is missing?

Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers

Double click on list field in ALV grid control

Hello all,
I developed a report with a ALV grid control. I would like to move some functionality from marking a line and pressing a button in the status line to double clicking a specific field in the output list and execute a command there (i.e. double click on PO number and go to PO display TAC then). Can anybody provide some example coding for that?
Thanks so much for your help!
Torsten

Here is your sample program. Copy this code into a z program. Create the screen 100 with a container in it and name it "ALV_CONTAINER". Create the gui-status with "BACK".
report zrich_0001.
tables: ekko.
data: begin of i_alv occurs 0,
      ebeln type ekko-ebeln,
      end of i_alv.
*       CLASS cl_event_receiver DEFINITION      Handles Double Click
class cl_event_receiver definition.
public section.
    methods handle_double_click
      for event double_click of cl_gui_alv_grid
      importing e_row e_column.
private section.
endclass.
*       CLASS CL_EVENT_RECEIVER IMPLEMENTATION    Handles Double Click
class cl_event_receiver implementation.
method handle_double_click.
    perform drill_down using e_row-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container.
data: event_receiver type ref to cl_event_receiver.
data: alv_grid       type ref to cl_gui_alv_grid.
data: layout    type lvc_s_layo.
data: fieldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_ebeln for ekko-ebeln.
selection-screen end of block b1.
start-of-selection.
perform get_data.
call screen 100.
*      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '0100'.
set titlebar '0100'.
data: variant type disvariant.
variant-report = sy-repid.
variant-username = sy-uname.
* Create Controls
create object alv_container
         exporting
               container_name    = 'ALV_CONTAINER'.
create object alv_grid
         exporting
               i_parent          = alv_container.
* Create Event Receiver
create object event_receiver.
* Populate Field Catalog
perform get_fieldcatalog.
call method alv_grid->set_table_for_first_display
      exporting
           is_layout              = layout
           is_variant             = variant
           i_save                 = 'U'
           i_structure_name       = 'I_ALV'
      changing
           it_outtab       = i_alv[]
           it_fieldcatalog = fieldcat[].
*   handler for ALV grid
set handler event_receiver->handle_double_click for alv_grid.
endmodule.
*      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'CANC'.
      if not alv_container is initial.
        call method alv_container->free.
        clear: alv_container.
        free : alv_container.
      endif.
      if sy-subrc = 0.
        set screen 0.
        leave screen.
      else.
        leave program.
      endif.
    when 'EXIT'.
      if not alv_container is initial.
        call method alv_container->free.
        clear: alv_container.
        free : alv_container.
      endif.
      leave program.
endcase.
endmodule.
* FORM GET_DATA
form get_data.
select * into corresponding fields of table i_alv
            from ekko
                 where ebeln in s_ebeln.
sort i_alv ascending by ebeln.
endform.
*      Form Get_Fieldcatalog - Set Up Columns/Headers
form get_fieldcatalog.
data: ls_fcat type lvc_s_fcat.
refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext    = 'PO Number'.
ls_fcat-coltext    = 'PO Number'.
ls_fcat-fieldname = 'EBELN'.
ls_fcat-ref_table = 'I_ALV'.
ls_fcat-outputlen = '12'.
ls_fcat-col_pos    = 1.
append ls_fcat to fieldcat.
endform.
* DRILL_DOWN
form drill_down using index.
read table i_alv index index.
if sy-subrc = 0.
    set parameter id 'BES' field i_alv-ebeln.
    call transaction 'ME23' and skip first screen.
    if not alv_container is initial.
      call method alv_container->free.
      clear: alv_container.
      free : alv_container.
    endif.
endif.
endform.
Regards,
Rich Heilman

How to add a check box in ALV Grid using SAP R/3 release 4.6b?

Hello everyone,
I hope you all fine.
I'm writing because I have a requirement with ALV Grid, what I need to do, is to insert a checkbox into a cell, I already read the forum to know how to do that, but I'm using a SAP R/3 release 4.6b, and when I execute the program the checkbox is displayed greyout, because this release doesn't have the EDIT property into the slis_t_fieldcat_alv.
Does any body know how to enable the checkbox cell in the ALV Grid for this release?, so it will allow the user to mark the desired rows.
I'll really appreciate if you guys could help me to find a solution.
Thanks for your time.
Regards,
Guillermo

Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers

List header for alv grid using abap objects

Hai all,
I have displayed alv grid in container control using abap objects i.e. using method set_table_for_first_display.
now i need to display list header for this alv grid.
please help me how to create with a sample coding.
Thanks and regards,
Prabu S.

Create a splitter using CL_GUI_EASY_SPLITTER_CONTAINER with a top and bottom half. Put the alv grid in the bottom half. Use cl_dd_document (documented in help.sap.com ) to build the header in the top half. Use events on CL_GUI_ALV_GRID to handle the top-of-list printing.
Or, if available, use CL_SALV_TABLE, and read the documentation on that. When I needed a header for my report, that's what I did. There's plenty of good documentation about if you'll search for it.
matt

Check box in alv grid

Hi Gurus,
I developed one alv(grid) report. the grid having first three columns are with check boxes. Now my requirement is if I tick or on tick those check boxes I need to track which records check boxes are modiried.
But I canot tracking the modified records . after ticking or unticking those check boxs values are not modified in intrnal table.
plese help this is very urgent.
Regards,
Shashikumar.G

Hi Kiran,
I displayed internal table with check boxes that is ok.
after displaying the internal table if i tick or un tick the records those are not modified in internal table but I need to track the records which are modified.
please give me repply urgently.
Regards,
Shashikumar.G

Re: creating check boxes in ALV grid using web dynpro

Hi Techies,
 I need to have a check box column in alv grid, and it should allow me to select the check box and the selected row has to be updated in the database.
Kindly assist me with the steps to handle the above mentioned scenario
Thanks in advance.

Now to first make the last column of my ALV as a checkbox:
method BUILD_ALV .
data: l_ref_cmp_usage type ref to if_wd_component_usage.
" Instantiate the ALV usage
l_ref_cmp_usage = wd_This->wd_CpUse_My_Alv( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
 l_ref_cmp_usage->create_component( ).
endif.
" Get reference to the model
DATA: l_ref_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
l_ref_INTERFACECONTROLLER = wd_This->wd_CpIfc_My_Alv( ).
data: lr_config type ref to Cl_Salv_Wd_Config_Table.
lr_config = l_ref_INTERFACECONTROLLER->Get_Model( ).
|" Set read only mode to false (and display edit toolbar)
lr_config->if_salv_wd_table_settings~set_read_only( abap_false ).
data: lr_table_settings type ref to if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
data: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
 lt_columns TYPE salv_wd_t_column_ref,
 lr_checkbox1 TYPE REF TO cl_salv_wd_uie_checkbox,
 lr_checkbox2 TYPE REF TO cl_salv_wd_uie_checkbox.
FIELD-SYMBOLS <fs_column> LIKE LINE OF lt_columns.
" Embed the UI elements within the ALV
lr_column_settings ?= lr_config.
lt_columns = lr_column_settings->get_columns( ).
" Embed an checkbox within the column APPROVE
LOOP AT lt_columns ASSIGNING <fs_column>.
 CASE <fs_column>-id.
 WHEN 'APPROVE'.
 CREATE OBJECT lr_checkbox1
 EXPORTING
 checked_fieldname = <fs_column>-id.
 <fs_column>-r_column->set_cell_editor( lr_checkbox1 ).
 FREE lr_checkbox1.
 ENDCASE.
ENDLOOP.
ENDMETHOD. "BUILD_ALV

List box in alv column

Hi Experts,
I have an requirement as follows. i ma getting the text from summary of notification.it is dispalyed in summary as four lines and it need to be displayed as same in the webdympro column i.e if summary is as follows:
USERNAME DATE
MATERIAL NO
REASON FOR REPLCEMANT
it shud be displayed as same in the int webdynpro alv column?
i wanted to use list box , but i couldnot find any class pertaining to list box which can be used in the ALV column.
Can anyone plz advice me h can i cheive this...........
Cheers,
Madhu

Hi,
See the sample report in sap technical web site.
follow this link saptechnical com/Tutorials/ALV/Dropdown/list.htm
YOu can also refer this sap standard report RSDEMO_TABLE_CONTROL
Regards,
Pravin
Edited by: pravin s. on Sep 21, 2010 9:05 AM

List Box in ALV Grid

Similar Messages

Maybe you are looking for