List Guibb with FBI

Hi everyone, I am a newbie of FBI and trying now to create a FPM Application with FBI.
Now I create my own Business object zd_sale_quote, which has a root node ROOT. and I want to directly display ROOT in a List Guibb wihout the initial screen. The Guibb is FPM_LISU_UIBB and the feeder class ist /BOFU/CL_FBI_GUIBB_LIST. I test the App and get the error:
500 SAP Internal Server Error
ERROR: Dynamic type conflict during the assignment of references. (termination: RABAX_STATE).
could someone help me with this?
thanks in advance.

Hello Yinxiao,
I understand your requirement to have a kind of a list of all master records. To get this list you need a query to collect these records. Although you might not need an entry screen I would suggest to use a search uibb to execute the query. In order to execute the search immediately without any input you can leave the option Enable Alternate Display for Result List in your feeder class empty. You can also set the search uibb to be collapsed to have the full screen for the result list.
Regads,
Kai

Similar Messages

Enabling Tool Bar Buttons for LIST UI for FBI ?

Hi,
I have created Actions to a Node 'MNR_SEARCH_RESULT',
when I Configure LIST GUIBB with this node I made 3 tool bar Buttons for these actions, but when Test the Application tool Bar Buttons are disabled .
(No data present in the list).
below are the screen shots :
How to make these Tool Bar Buttons Enable ?
How to Create One Click Action in the List ?
Thanks In Adv.
Thanks,
Kranthi.

Hi Kranthi,
1. Can you please check the additional settings in FPM list - 'Enable Event on All Selections'?
2. Check the corresponding FPM view. In 'Action' tab, add the actions and check the checkbox 'enable' .
Thanks,
Dhivya

List GUIBB configuration - Rowrepeater style rendering

I could not find a way to set header, to add link in the row repeater or to setup a toolbar for list guibb with style rendaring rowrepeater. Is there a way to configure this?
Is there a specification or examples for list guibb that can be use?

Hello Stefka,
a toolbar is not available when rendering style rowrepeater is active. When using guibb list with rendering style rowrepeater it is also important that you mark one column as grouped column. (see method get_definition, parameter field_description, attribute group_column). An example can be found under in package apb_fpm_test, appl. fpm_test_umi1.
Regards,
Ulrich

List GUIBB and Column Width

Hi Experts
We're facing some strange behavior: The width of each column in our List GUIBB is always full browser width. From our point of view the corresponding feeder class works fine, the GET_DEFINITION method provides a field catalog and corresponding field descriptions.
Did anyone of you faced the same problem? What do we wrong?
Regards,
Mathias

HI
Please tell us how this was solved. We are facing the same issue with Form UIBB.
Thank you !
G

How Do You Populate A Spark List Control With An Array?

Hello, all,
Sorry to come accross so frustrated, but how in the name of God do you populate a Spark list control with the data in an array? You used to be able to do this with the mx:List control, but the guys developing Flex just had to make things more difficult than they need to be! I am more of a code purist and prefer doing things the way they have been done for decades, but apparently nothing can ever stay simple!
I simply want to populate a list control with an array and this shouldn't be rocket science! I found out that I must use a "collection" element, so I decided that an arrayCollection would be best. However, after searching Adobe's documentation about arrayCollections, I am lost in a black hole of data binding, extra lines of code just to add a new element, the need to sort it, etc...!
Here is my code:
var pendingArray:ArrayCollection = new ArrayCollection();
for ( var i:int = 0 ; i < queue.length ; i++ )
     var item:UserQueueItem = queue[i] as UserQueueItem ;
     if ( item.status == UserQueueItem.STATUS_PENDING )
     pendingArray.addItem({label:item.descriptor.displayName,descriptor:item.descriptor});
Here is the relevant MXML:
<s:VGroup>
     <s:List id="knockingList" width="110" height="100"/>
</s:VGroup>
I'm not getting any errors, but the list is not populating.
I have seen several examples where the arrayCollection is declared and populated in MXML:
        <mx:ArrayCollection id="myAC">
            
            <fx:Array id="myArray">
                <fx:Object label="MI" data="Lansing"/>
                <fx:Object label="MO" data="Jefferson City"/>
                <fx:Object label="MA" data="Boston"/>
                etc...
           </fx:Array>
        </mx:ArrayCollection>
That may be fine for an example, but I think this is a rare situation. Most of the time I would image that the arrayCollection would be created and populated on the fly in ActionScript! How can I do this?
Thanks in advance for any help or advice anyone can give!
Matt

In your post it seemed like you were trying to take care of many considerations at once: optimization, design, architecture. I would suggest you get something up and running and then worry about everything else.
If I use data binding, then I will probably have to declare the arrayCollection as a global variable and then I'll have to write 100 or so extra lines of code to addItem(), removeItem(), sort(), etc... It just seems like too much overhead.
I believe you may have some misconceptions about databinding in general. You won't have to make it a global variable and you certainly won't need an extra 100 lines of code. If you did this forum would be a very , very quiet place.
I don't want to use data binding because the original array is refreshed often and there is one function called by an event that re-declares the arrayCollection each time, populates it with the array, and then sets it as the list's dataprovider.
That is the beauty of the ArrayCollection, it can handle the updates to its source Array. I don't know if you need to redeclare the ArrayCollection, resetting the source to the new Array allows everyone involved to keep their references so you don't have to worry about any "spooky" stuff going on.

My Top Rated songs, when I synch my iP4S - comes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong?

When synching, itcomes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong? This happens every time so I click them and it sorts them (boring with 200 odd). How can I prevent this?

Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

SharePoint Designer 2013 (2010 Platform Workflow) - How can I create a new list item with a SPECIFIC content type?

In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library).
We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform. Is there any way to create a list item with specific content
type? Even if I could just input a string into that field instead of using this blank drop-down. Please help!

Hi Sarah,
According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
How did you create the content type?
Please check if the content type is added to the list/library the workflow associated with.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can I select an item from a list component with a seperate button

This is a repost, I decided it'd probably be better here than
in the general discussion board. I will try to delete the other
one.
Hello Everyone,
This is my first post here. I am trying to figure out how to
select an item within a list component with a button. This button
is calling a function. I have searched for the past 3 hours online
and I can't find anything about it. I thought perhaps I could set
the selectedItem parameter, but that is read only, and I believe it
returns an object reference rather than something like a number so
even if i could set it, it would be pointless. I also found a get
focus button, thought that may lead me somewhere, but I think that
is for setting which component has focus currently as far as typing
in and things like that. I am lost.
Basically I am looking for a way to type this
myList.setSelected(5); where 5 is the 5th item in the list.
Any help would be much appreciated.

Never mind found it. It is the property called selectedIndex
and it is writable

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?
If not, then to me that is a huge retrograde step

No, the old album list view is not an option in iTunes 11...
You can restore much of the look & feel of the previous version with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="vertical">
    <mx:Script>
        <![CDATA[
             import mx.events.ListEvent;
             import mx.controls.CheckBox;
           [Bindable]
           private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
            private function onChange(e:ListEvent):void
               if(CheckBox(e.itemRenderer).selected){
                         mySelectedIndexes.addItem(e.rowIndex);
               }else{
                              mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
               chkList.selectedIndices=mySelectedIndexes.toArray();
        ]]>
    </mx:Script>
<mx:ArrayCollection id="collection">
        <mx:Object label="Test A"/>
        <mx:Object label="Test B"/>
        <mx:Object label="Test C"/>
        <mx:Object label="Test D"/>
        <mx:Object label="Test E"/>
        <mx:Object label="Test F"/>
        <mx:Object label="Test G"/>
    </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

Customising a SharePoint list content type form - "Manage multiple list items with this form"

I have designed a form for a content type on an existing SharePoint list. When I ran the initial wizard, I selected
Manage multiple list items with this form which is great, exactly what I want.
But, there are some columns in this content type that I do not want repeating and have them moved them outside of the Repeating Section but I am getting the below error. I can't seem to find a way to create a new non-repeating group though. Any
advice on how to do this?

*Bump*

How to add a list box with values for a ztable in SM30

Hello Gurus,
I had created a table maintenance for Ztable and added many extra functionality to that. Now i would like to add a list box or check table for a field. Can i do that with out Regenerating my table maintenance. Please help me its..very urgent.

Have referred this domain to the data element, this should be the Field type in ur table for the particular field.
Eg: <b>SE11 > table name > fields-ZTEST > fieldtype-ZZTEST</b>
ZZTEST in the data element > create a domain for this data element and in that specify teh value range.
Save and activate it.
Make sure that u regenerate teh table maintenance generator else u cant see the changes.
Now if u press F4 u can see only thevalues specified, also u will see only the list box with values in SM30.
Try this,please let me know if u face any difficulties.

How to cancel enternal list create with ELM

Dear Expert, i need an information.
I use ELM (transaction CRMD_MKTLIST) to upload lead in CRM.
Is there the possibility to cancel from the system an external list created with CRMD_MKTLIST ? In the transaction there isn't the possibility ti do it(only to create ) . Are there other transaction ? Any function module ? Any report ?
Thank you in advance
Davide Grosso

Hi Davide,
There is only one scanrio where you are able to delete the Master Data that was created by ELM and this is if you have selected the "rented" flag for your upload. If you have done this, you will be able use the Delete External List function.
Further details can be found below.
http://help.sap.com/saphelp_crm70/helpdata/EN/46/32a564ff4914dce10000000a155369/content.htm
I hope this helps,
Regards,
David.

Site Definition with Custom List Intance with Custom fields

How to create VS 2012 > Site Definition with Custom List Instance with Custom fields?
<site>
<list>
<field>

Hi Sunil,
it is the same way we create in VS 2010.
Add a new empty SP project in VS2012 and then add, site, list and fields as per your requirement.
Here are few references-
Creating SharePoint 2010 Site Definitions in Visual Studio 2010
http://msdn.microsoft.com/en-us/library/gg276356(v=office.14).aspx
Creating SharePoint 2010 List Definitions in Visual Studio 2010
http://msdn.microsoft.com/en-us/library/gg276355(v=office.14).aspx
Walkthrough: Create a Basic Site Definition Project
http://msdn.microsoft.com/en-us/library/ee231583.aspx
and I normally create a blank site with all required configuration and then create, import the template to hand craft the list and fields. this would minimize errors.
see the below blog on this topic
http://blogs.msdn.com/b/sambetts/archive/2013/10/17/creating-a-clean-visual-studio-solution-from-a-sharepoint-2013-site-template.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

List Guibb with FBI

Similar Messages

Maybe you are looking for