List Item issue during Query

Hi,
I have 2 List Items in my form.
I loaded the value for List Item in When-New-Form-Instance trigger using ADD_LIST_ELEMENT.
But i cant query the form.No records are retrieved.
Can u suggest me
Regards
Nithiya.N

Do you get any error? If not, be aware that oracle only retrieves records which has a matching value in any database-based listitem in the block. Maybe you check the values you assign to your listitem.

Similar Messages

List item - Record Group Query - Alignment improper Order

Dear All,
When am trying to concatenate two columns using record group query and displaying in the list item, the alignment is not in proper order.
E.g; Below is the columns and data's used in process:
CODE_VALUE     SHORT_DESC     DESCRIPTION
ROLL1     Customer - Non accidental     Production, booking with other carrier, bad projection.
ROLL2     Customer - Accidental     L/C, B/L draft, Customs, Samples, AMS, LAR.
ROLL3     ABC - Lack of empty     Lack of empty units.
ROLL4     ABC CDE - Roll over     AGR RRR decision.
ROLL5     ABC XXX - Accidental     IMO or OOG refused, operational problems, Cut & Run.
ROLL6     ABC YYY - Fictive booking     Equipment buffer, dummy booking.
Below is the record group query used in forms:
PROCEDURE p_when_new_form_instance
IS
GROUP_ID recordgroup;
list_id item := FIND_ITEM ('BLK_CONTROL.LI_ROLL_REASON');
rg_name VARCHAR2 (20) := 'LI_ROLL_REASONS';
status NUMBER;
l_query VARCHAR2 (4000);
BEGIN
l_query :=
'SELECT rpad(short_desc,50,'' '')||'' | ''||description description, code_value code_value FROM codes WHERE code_value IN (''ROLL1'', ''ROLL2'', ''ROLL3'',''ROLL4'',''ROLL5'',''ROLL6'')';
GROUP_ID := CREATE_GROUP_FROM_QUERY (rg_name, l_query);
status := POPULATE_GROUP (GROUP_ID);
POPULATE_LIST (list_id, GROUP_ID);
EXCEPTION
WHEN OTHERS
THEN
pl_common.when_others;
END;
Moreover i have my list item font property by default as ""MS SANS SERIF" and when i run in Forms Builder am getting the alignment as below.
Result:
====
DESCRIPTION     CODE_VALUE
Customer - Non accidental | Production, booking with other carrier, bad projection.     ROLL1
Customer - Accidental | L/C, B/L draft, Customs, Samples, AMS, LAR.     ROLL2
ABC - Lack of empty | Lack of empty units.     ROLL3
ABC CDE - Roll over | AGR RRR decision.     ROLL4
ABC XXX - Accidental | IMO or OOG refused, operational problems, Cut & Run.     ROLL5
ABC YYY - Fictive booking | Equipment buffer, dummy booking.      ROLL6
Above order is not the expected result as all the |(pipe) symbol should display in proper order as below.
Expected Result:
==========
DESCRIPTION     CODE_VALUE
Customer - Non accidental | Production, booking with other carrier, bad projection.     ROLL1
Customer - Accidental | L/C, B/L draft, Customs, Samples, AMS, LAR.     ROLL2
ABC - Lack of empty | Lack of empty units.     ROLL3
ABC CDE - Roll over | AGR RRR decision.     ROLL4
ABC XXX - Accidental | IMO or OOG refused, operational problems, Cut & Run.     ROLL5
ABC YYY - Fictive booking | Equipment buffer, dummy booking.      ROLL6
I tried with RPAD and LPAD still the alignment issue is there; i know the issue is because of invariable length of the font.
But is there any solution to override this it will be of great help.
So please help!!!!!!!!!!!!!!!!!
Thanks..................
Regards,
Sunil.G

Hi Francois,
Thanks for your reply. I have tried changing the font to "Courier(Western)" it is working fine.
But as per the standards defined, it should be "Ms Sans Serif" nothing apart from that.So that is where the problem lies. :(
Regards,
Sunil.G

Filter SharePoint list items using CAML query as same as Like operator in SQL Server.

Hi ,
I have filtered SharePoint list items based on Name using CAML query <Contains> . Now I have a new requirement is to filter list items using Like operator in SQL. But Like operator is not in CAML.
How do I filter list items using CAML as same as Like operator in SQL.
Please let me know.
Thanks in Advance.

Did you try using <Contains>?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/15766fd5-50d5-4884-82a1-29a1d5e38610/caml-query-like-operator?forum=sharepointdevelopmentlegacy
--Cheers

Populate HTML LIST ITEM with a query

Hello,
I've a problem,
I'm building a portlet based on an html form.
In this forms there are several list items,
How can I populate an html list item with a dynamic query based on a db table?

I hope you are looking for something like this
declare
v_ret_string varchar2(32767);
begin
v_ret_string := ' <TABLE BORDER="1" bordercolor="#0000FF" bgcolor="#FFFFF0">
               <TR><TD><TABLE BORDER="0" CELLSPACING="3" CELLPADDING="0">
               <BR>
                    <TR><TD ALIGN=middle><SELECT SIZE="1" NAME="emp_list">
                         <OPTION VALUE="">';
For get_emp_list In (Select ENAME,EMPNO
From SCOTT.EMP
          Order by ENAME) Loop
v_ret_string := v_ret_string || '<OPTION VALUE="'||get_emp_list.EMPNO||'">'||get_emp_list.ENAME;
End Loop;
v_ret_string := '</SELECT></TD></TR><TABLE></TABLE>';
End;
which uses PL/SQL code to generate the html page.
Thanks
-Krishnamurthy

Filter list items based on security groups o365

How to filter list items based on security groups in o365.

Hi,
According to your description, my understanding is that you want to filter list items based on the Office 365 security groups.
If that is the case, I suggest you can create a data view to filter the list items with CAML Query like below:
<Where>
<Membership Type="CurrentUserGroups">
<FieldRef Name="VisibleToGroup"/>
</Membership>
</Where>
For more information, please refer the detailed article below:
SharePoint - Filtering a View by Group Membership
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is it possible to query an Item with two or more conditions in OOB Update List Item WF Step

In SharePoint Designer 2010, in Workflows, is it possible to give more then one condition when querying items? Let me explain, it is fairly easy to drop Update item in this list step, and say, for example, Update item with ID X. However, if is it possible
to do something along this lines with OOB steps, Update an item in this list where Title is Equal to "abc" and Modify date no older then 3 days.
Update: Workflow is started when the item is added to the list. What I would like is to update some fields on this item depending on information in this item and in external list. For example
Current Item Field 1 has value "abc"
Current Item Field 2 has value "123"
Current Item Field 3 has value "456"
External List has Item with value in Field 1 "123"
External List has Item with value in Field 2 "abc"
External List has Item with value in Field 3 "xyz"
Update Current Item Field 3 with value "xyz"
In short I would need following query - Update Current_Item_Field_3 with value from External_List_Field_3 where Field 1 is equal to Current_Item_Field_2 and Field 2 is equal to Current_Item_Field_1

Hi,
From your description, I understand you want to update list item with workflow based on two or more conditions.
To resolve your issue, you need to use “If current item field equals value” condition. Use this condition to compare a field in the current item that the list or reusable list workflow is currently running on to a value. Values can be static text, dynamic
strings, and lookups to variables, context information, or other SharePoint fields. And you can learn more about each condition by referring to the article:
https://support.office.com/en-in/article/Workflow-conditions-in-SharePoint-Designer-2010-A-quick-reference-guide-d8e33ac7-9336-487f-a60b-388c4ea497ff?ui=en-US&rs=en-IN&ad=IN
I assume your External List is called “ListB”, and Current List is called “ListA”, You can follow the steps below:
1. Add “If current item field equals value" for condition that ListB Field2 equals to ListA Field1, then set the second condition “ListB Field1 equal to ListA Field2” as the “Find the List Item” in the “Lookup for Single line of text”
as the screenshot below:
2. Add “Update List Item” as the screenshot below for updating Current_Item_Field_3 with value from External_List_Field_3. In addition, you should set “Find the List Item” in “Lookup for Single line of text” same to the “Find the List Item” in step 1:
In addition, if you have more conditions, you could add “If current item field equals value” condition, and you should set each “Find the List Item” in “Lookup for Single line of text” same to the “Find the List Item” in step 1.
Regards,
Rebecca Tu
TechNet Community Support

List item (combo box) issues...

Hi,
I have a form I'm creating that returns several records based on a query that the user may edit. I do not base these items on database values, but rather control the data within the form. I have created dynamic combo boxes for the return values (ie, they're only visible when valid values are returned to them). Basically, when I click on a combo box after the items have been populated, I want to populate the combo box, but exclude the values in the remaining combo boxes restraining the user from trying to specify the definition for a value type twice. I'm running into two problems. First, I use the when-mouse-click trigger on the combo box to populate the values, however, it seems it's automatically generating a scrollbar within the combo box, showing two arrows (which I don't want but can't seem to disable). Also if a user clicks on it twice, it's continuing to add values. I have used the clear_list function, but that seems to be causing other problems such as removing one value, but leaving another and after 2 clicks stops working. Has anyone done something similar or have an idea as to how I might get the functionality I want?
Thank you.

Can u try to attach a record group to the list item
and you only populate record group with commands
1. Create record group with 2 columns
2. Populate the group
FUNCTION POPULATE_GROUP
(recordgroup_id RecordGroup);
3.Populate list
PROCEDURE POPULATE_LIST
(list_id ITEM,
recgrp_id RecordGroup);
this way you will have better control.Hi,
This actually worked great. Thank you!
The only issue I'm still having is the initial when-mouse-click action is bringing up a scrollbar and minimizing what you can view to one value inside the existing list item, but allowing you to scroll through the list displaying one item at a time (within the list item). If I click twice, the scrollbar disappears, but you still can't see the full list. If I click three times, it starts functioning the way I want it to on the initial click by displaying all values as a combo box list with no scrollbar (all values visible). Is there a behavior I'm overlooking that will force it to behave this way from the initial mouse click?
Thank you again!

Caml query for filtering list item not working as expected in Sharepoint hosted app

I am trying to filter list item based on particular value.
var header = "xyz";
camlQueryHeader.set_viewXml = "<view><Query><Where><Eq><FieldRef Name='Position'/>" + "<Value Type='Text'>" + header + "</Value></Eq></Where></Query></view>";
Instead of getting filtered list items, I get all the list items. What am I missing?
Note: I am creating Sharepoint hosted app using CSOM.
regards, Ritesh Anand

Hi,
According to the code provided, I suggest you modify the code like this:
camlQueryHeader.set_viewXml('<view><Query><Where><Eq><FieldRef Name=\'Position\'/>' + '<Value Type=\'Text\'>' + header + '</Value></Eq></Where></Query></view>');
Here is a documentation of how to use the viewXml property of SP.CamlQuery object:
SP.CamlQuery.viewXml Property
Thanks
Patrick Liang
TechNet Community Support

Is it possible to submit a list item and at same time query/search the results if parameters are matched.

Hello,
Is it possible to submit a list item and at same time query/search the results if parameters are matched.
Example - user logon to site enter search parameters and hit submit button. Once done parameters gets saved in list and shows search results on page. I have been asked to do this with
SP designer and InfoPath doesn’t work due items limits.
Please suggest.
Thanks,
Manish
Manish

Hi Manish,
may i ask if you need,
when user account click the login button, it will be authenticate the user and then it will show search result page?
may i know how the keyword of words to be put? is it together with the user account box, password and keyword?
or it will be like, after user authenticate, it will redirect to search page, so that user may use the search page to input the keyword?
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Oracle Forms List Items :not populating list Dynamically using select Query

Hi ,
I need to create a list item. And the values to be populated in the list are from Database but I'm unable to populate from database.
Please help me out how to populate the values from database.
In Property Pallete we have Elements in List under Functional section , In this we have to manually enter the List values but we can't use any Query to Dynamically populate.
Thanks,
Kiran Sanga

When you need to fill a list with the result of a query, you'll have to do it at runtime.
Andreas has a good blogpost about this.

CAMl Query -CSOM - Display Modified date of list Item in a required format

Hi All,
I want to display last modified date of a List Item.
I am getting the value in this format :
Tue Feb 25 23:06:57 PST 2014
How ever, I want to display it as : Tuesday 25th February 2014
Please suggest how to achieve this.
Any informative articles, links w.r.t building such queries in CSOM (jQuery) is welcome.
Thanks.

I have the query :
function ReadListItem() {
siteUrl = "my site Url";
var listTitle = "NewsList";
//Get the current client context
var context = new SP.ClientContext(siteUrl);
var newsList = context.get_web().get_lists().getByTitle(listTitle);
var camlQuery = new SP.CamlQuery();
camlQuery.set_viewXml('<View><Query><OrderBy><FieldRef Name=\'Modified\' Ascending="FALSE"/></OrderBy><RowLimit>1</RowLimit></Query></View>";')
this.listItems = newsList.getItems(camlQuery);
context.load(listItems);
context.executeQueryAsync(ReadListItemSucceeded, ReadListItemFailed);
function ReadListItemSucceeded(sender, args) {
var itemsString = '';
var enumerator = listItems.getEnumerator();
while (enumerator.moveNext()) {
var listItem = enumerator.get_current();
itemsString += 'Modified On: ' + listItem.get_item('Modified');
$("#P1").append(itemsString);
I am able to get the Modified Date using the query
But I need it in a specific format like : Tuesday 25th February 2014
Please suggest

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

How to get List Item attachments name without write any custom code or any database query?

Hi,
How to get List Items attachments name without write any custom code or any database query?

You can get it from Rest,
There are 2 options,
1) create a 'Result Source' which has a search query for that List which has attachments
- Use rest query to get the 'Filename' , it will have the attachment file name
For example, if the result source id is : 73e6b573-abf8-4407-9e5f-8a85a4a95159 , then the query will be
http://[site URL]/_api/search/query?querytext='*'&selectproperties='Title,Path,FileExtension,SecondaryFileExtension,Filename'&sourceid='73e6b573-abf8-4407-9e5f-8a85a4a95159'&startrow=0&rowLimit=100
You can refine the query, be giving proper 'querytext'
2) Use the List rest api
For example if your list guid is :38d524a1-e95c-439f-befd-9ede6ecd242e
You can get he attachments for 1st item using this
http://[Site URL]/_api/lists(guid'38d524a1-e95c-439f-befd-9ede6ecd242e')/items(1)/AttachmentFiles
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

URGENT: Creating LIST item during design time.

Hi All,
Is it possible to create LIST item [with MultiSelect option] during design time. The Developer guide has only programmatic implementation. So, Please let me know, whether its possible or not.
Thanks.

Yes, it has to be done programatically only. There is no property in the Property pallet to do this declaratively as of now.

List Item - Query

Hello,
I would like the contents of my list item to be based on values in a table as opposed to my entering the values statically in the List elements box.
Can someone send me the code / procedure of doing this ?
Thanks
FM

You can use the following built-in:
Populate_list (list_tem_name OR id, Record_group_name or id)
The record group could be created at design time OR at run-time, its based on a query that selects 2 columns, first represents label, and second represents value.
if you'll create record group at run-time, use create_group_from_query and populate_group built-ins..

List Item issue during Query

Similar Messages

Maybe you are looking for