List of all users attached to a role iview time out / Action canceled

Hello All,
I've created a custom iview which pulls all the users assigned to roles. It gives all the users attached directly to the role and through a group to a role in a tabular form. The isolation method on the page is set to URL.
It works fine when the number of users attached to the users are less. But for roles which has got about 30,000+ users it fails. Earlier it was giving me time out error. So increased the "Page timeout " to 25000000 which is very huge. Now it doesnt give me time out error but it comes up with a page saying "Action canceled - IE was unable to link to the web page you requested. The page might be temporarily unavilable".
When I run the report, it tries to get the users, it works for like 10 - 12 mins, and i think when its trying to put all those users in a table for display, it give me a blank screen (this is how it behaves for less users, just before its about to display the page), then i see IE status bar saying "Website found ....", then it says "Done" and then it gives a page saying "Acion Canceled - IE was unable to link to the web page you requested. The page might be temporarily unavilable."
Please help me out.
Thanks.

Hi Shikka,
maybe you should not display that 30.000+ users...
Just think how long the page will be....
SAP uses for tables with more than 20 lines a "next page" button for a reason.....
How about you write the result in a txt file (in one of your par file folders) and have a download link in you iview?
Regards, Kai

Similar Messages

BI Report - List all users and their assigned roles

Hello,
i need a report, which lists me all users and their roles.
Which table stores this membership information about the users?
USR or UGP does not have any values

Hi Reynaldo,
You can go to SE16 -> table name "AGR_USERS" and see the records for all users. Arrange them in ascending order by name and you will get the report what you have mention above.
Download it and put it in EXCEL.
Best Wishes.
Kumar

How to find out the list of all user's whose passwords are expired

Hi
i had tried to find out the list of all user's whose passwords are expired.
i had written some jndi code by finding the max age and then find out the current time and subtracted this current time from max age using the following code
"Attributes attbts=ctx.getAttributes("cn=pwdpolicy");
String maxAge=(String)attbts.get("pwdMaxAge").get();
Date Today = new Date();
System.out.println("maxAge"+maxAge);
long curTime=(Today.getTime())-Long.parseLong(maxAge)*1000;"
and then parse it and create a string time as follows
String time=year+month+day+hour+minute+second+"Z";
where "year" "month" etc were parsed from curTime
now i can get the list by using following code
"String filterCriteria="(&(objectclass=person)(pwdChangedTime>="+time+")";
NamingEnumeration results = ctx.search(baseDN,filterCriteria, sc); "
but the current time which i am getting is the time of my system not the time of ldap server
so my questions are following;
1.Can there is any way by which i can get the tivole sever's system time.
2.If there is no way then can you suggest any other way to find out the list of user's whose passwords are expired.
please help me.
Thanks.
Krishan Rathi.

Hi,
Thanx for ur reply..
I got the list from the table...
thanks,
sivagami

How to find the list of all user exits modified by the users

How to find the list of all user exits using by in R3

Hi Mohamed
You use Solution Manager to do the comparison for you. There are some nice features that will highlight all your customised coding. Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
Rgards
Carl.

How can i get the list of all users present in the LDAP

Hi Experts,
How can i get the list of all users present in the LDAP ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded

Well it will depend on exactly where your UME configuration points to in the LDAP tree but yes, it is possible to get all users. Something like the following should do it:
import com.sap.security.api.*;
import com.sapportals.portal.prt.component.*;
IUserFactory iuf;
ISearchResult isr;
IUser user
String userid;
iuf = UMFactory.getUserFactory();
isr = iuf.getUniqueIDs();
you will need to iterate the ISearchResult object but you can get IUser objects by
userid = (String)isr.next();
user = iuf.getUser(userid);
then you can imanipulate / identify / or whatever you need with the user object
Haydn

How can i get the list of all users present in the UME ?

Hi Experts,
How can i get the list of all users present in the UME ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded
-pankaj chouhan

Hi Pankaj,
find the official NetWeaver security javadocs (including access to UME) <a href="http://help.sap.com/javadocs/NW04S/current/se/index.html">here</a>. Look for classs UMFactory and proceed from there.
Best regards,
Martin

How to get the list of all users

Hi,
Is there a way in Grid Control for getting the list of all users on all target databases? I need to count how many Oracle db users in our company.
Thanks a lot.

One way to do it might be...
Assuming you have preferred credentials set up for all of your databases, you could run a 'select username from dba_users or all_users;' against all of your databases through grid control.
Click on Targets tab, click Databases, then the 'Execute SQL' link at the bottom of the page. Click 'Add' and 'Select All'. Then run it. It's just running the same sql across all of your databases and the output will be at the bottom for all of them.

Getting list of all users present in SIM

Hi,
I would like to update all the users (attributes of users) in SIM .
Right now I am thinking to get list of all users present in SIM and get the view of each user and then update the particular attribute and chekin the view. and imp point to note here is I am having around 100,000 users present in SIM.
I am thinking there could be a better solution than this...
But I do not know which way can be used to accomplish the task.
Can any one reply immediately with any thought on this.
Thanks in advance.

Run a bulk update actions you can easily get a list of all accountids by running select name from userobj;
and in your field or in your input area specify the values u wanna update

Active Directory, created users not showing up in list of all users

I created a user name "test". However, when I look at a list of all users I only have the 4 users that were created on installation. When I search for "test"
it shows up. Why isn't my user showing up in the list of users?
I am looking in Active Directory Administrative Center:
<my Domain> (local) -> Users
Global Search
Sorry I cannot provide pictures; I am waiting for my account to be activated.

You need to look to your search criteria to understand what might be wrong.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

List of all participants to a specific role using PAPI

Hi,
Is there a way, we can get the list of all participants with a specific role using PAPI.

Satarama,
Yes, it's possible to get a list of participants in a Role using PAPI. If you're doing this within a project (i.e. not from an external PAPI client), you can use the out-of-box catalog component Fuego.Lib.Role. Using Java syntax, it will look something like this:
Role theRole = Role.find(name: roleName);
Participant[] participantList = theRole.participants;If you're doing this from an external client, you'll find similar functionality in the class DirOrganizationalRole. In Studio, you can find this and related classes in the package Fuego.Fdi.*.
Greg

List of all users in a client along with their roles

Hi All,
Is there a way to get a list of all the users available in a client along with the roles assigned to them?
I could actually compare the users and roles individually. But i would like to have a complete list.
Thanks
Vijay

basically you want user reports...
You can try go to transaction SE38 -> RSUSR* , all the user reports are started with RSUSRxxxxx, inside might have something relevant to your request.
cheers,
Vincent

List all users and their own roles.

Hi everybody!
I have to make a list of all sap users and their own separated roles by user. There are any transaction to do it? The SUIM transaction gives me a sap user and their own roles, but if I try with a lot users It gives me all the roles that are using those users but don't give me the roles for each one.
Thanks a lot.
Best regards.

Hi Reynaldo,
You can go to SE16 -> table name "AGR_USERS" and see the records for all users. Arrange them in ascending order by name and you will get the report what you have mention above.
Download it and put it in EXCEL.
Best Wishes.
Kumar

List of Portal users with the assigned Roles.....

Hello All,
I am working on EP6 SP9 and want to know from where can I get a list of all Portal users along with the assigned roles for each of them.
One way I found is by searching for all users in User Administration role and along with the searched users, there is also an icon for Assigned roles.
Apart from the above mentioned way, is there any other way by which I can get a direct list of the same. Is there a Java sample code for this.....?
Please help.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Ritu,
Yes it is possible to get the roles of the users. You can try the following java code.
package com.hcl.user;
import java.util.Iterator;
import java.util.Vector;
import com.sap.security.api.IRole;
import com.sap.security.api.IRoleFactory;
import com.sap.security.api.IRoleSearchFilter;
import com.sap.security.api.ISearchResult;
import com.sap.security.api.IUser;
import com.sap.security.api.IUserAccount;
import com.sap.security.api.IUserFactory;
import com.sap.security.api.UMFactory;
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
public class role_member extends AbstractPortalComponent {
public void doContent(
IPortalComponentRequest request,
IPortalComponentResponse response) {
try {
IUserFactory userfactory = UMFactory.getUserFactory();
IRoleFactory rolefactory = UMFactory.getRoleFactory();
IRoleSearchFilter rolefltr = rolefactory.getRoleSearchFilter();
rolefltr.setMaxSearchResultSize(2000);
ISearchResult result = rolefactory.searchRoles(rolefltr);
while (result.hasNext()) {
response.write("<table border=0>n");
String uniqueid = (String) result.next();
IRole role = rolefactory.getRole(uniqueid);
response.write("<tr><td bgcolor=Red>"+ role.getDisplayName()+ "</tr></td>n");
Iterator users = role.getUserMembers(true);
while (users.hasNext()) {
String unique_user = (String) users.next();
IUser user = userfactory.getUser(unique_user);
IUserAccount account[] = user.getUserAccounts();
response.write(
"<tr><td>" + account[0].getLogonUid() + "</tr></td>n");
response.write("</table>n");
response.write("</br>n");
} catch (Exception e) {
This code gives you the list of all the users of your portal along with the roles assigned to them.
Apart from this if you want you want to know all the roles assigned to the user on portal itself then the way you mentioned is the correct method.
Regards
Pravesh
PS: Please consider awarding points.

Getting list of all users and their group memberships from Active Directory

Hi,
I want to retrieve a list of all the users and their group memberships through JNDI from Active Directory. I am using the following code to achieve this:
==================
import javax.naming.*;
import java.util.Hashtable;
import javax.naming.directory.*;
public class GetUsersGroups{
     public static void main(String[] args){
          String[] attributeNames = {"memberOf"};
          //create an initial directory context
          Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
          env.put(Context.PROVIDER_URL, "ldap://172.19.1.32:389/");
          env.put(Context.SECURITY_AUTHENTICATION, "simple");
          env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
          env.put(Context.SECURITY_CREDENTIALS, "p8admin");
          try {
               // Create the initial directory context
               DirContext ctx = new InitialDirContext(env);
               //get all the users list and their group memberships
               NamingEnumeration contentsEnum = ctx.list("CN=Users,DC=filenetp8,DC=com");
               while (contentsEnum.hasMore()){
                    NameClassPair ncp = (NameClassPair) contentsEnum.next();
                    String userName = ncp.getName();
                    System.out.println("User: "+userName);
                    try{
                         System.out.println("am here....1");
                         Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should be returned
                         System.out.println("am here....2");
                         Attribute groupsAttribute = attrs.get(attributeNames[0]); // memberOf
                         System.out.println("-----"+groupsAttribute.size());
                         if (groupsAttribute != null){
                              // memberOf is a multi valued attribute
                              for (int i=0; i<groupsAttribute.size(); i++){
                              // print out each group that user belongs to
                              System.out.println("MemberOf: "+groupsAttribute.get(i));
                    }catch(NamingException ne){
                    // ignore for now
               System.err.println("Problem encountered....0000:" + ne);
               //get all the groups list
          } catch (NamingException e) {
          System.err.println("Problem encountered 1111:" + e);
=================
The following exception gets thrown at every user entry:
User: CN=Administrator
am here....1
Problem encountered....0000:javax.naming.NamingException: [LDAP: error code 1 -
000020D6: SvcErr: DSID-03100690, problem 5012 (DIR_ERROR), data 0
]; remaining name 'CN=Administrator'
I think it gets thrown at this line in the code:
Attributes attrs = ctx.getAttributes(userName, attributeNames);
Any idea how to overcome this and where am I wrong?
Thanks in advance,
Regards.

In this sentence:
Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should
It seems Ok when I add "CN=Users,DC=filenetp8,DC=com" after userName, just as
userName + ",CN=Users,DC=filenetp8,DC=com"
But I still have some problem with it.
Hope it will be useful for you.

Daughter IPOD Touch 4th lost all music from itunes, Itunes suggested to restore to factory settings. Have done so last few days, all showing 20 hours to restore then times out and starts back to 20 hours again. Will not sync at all. HELP

IPOD TOUCH(4th gen) MUSIC DISPLAY has wiped out all my music. The music I have is all still on ITUNES but will NOT SYNC. When attempted a displayes message appeared- Cannot read contents of IPOD (my IPOD name), go to Summary tab to Restore to factory settings. When I click OK it takes me to a CLICK on RESTORE OPTION, which I did. Then it explains that I will lose all APPS, etc.. to restore. I clicked OK again and it shows my IPOD is Downloading Software Update. The only thing being it has done this for 3 days now. It starts by stating will take 20 hours, goes down to 12 or 10 and prompts OUT and when I redo the thing again it starts back up at 20 hours but continually times out. *Also, in case it matters ,the SYNC option on my IPOD in ITUNES is Highlighted as to where I cannot use that option. Everytime I start it back up I get the same message (Cannot read contents of IPOD, go to Summary Tab,etc..) Help.

http://support.apple.com/kb/HT1808
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Please do not post with large italic font. It is very annoyint.

List of all users attached to a role iview time out / Action canceled

Similar Messages

Maybe you are looking for