List of Amended PO's

is there any standard report where we can see a list of " amended PO's"

Hello,
Purchase order ammendment is not stsndard functionality of SAP, If you have developed Zprog for the same than you have to develop Z report to view list of ammendment.
Regards
Kedar Kulkarni

Similar Messages

  • Preventing Double Click on Link in List

    Hello folks,
    APEX 4.1
    I'm supporting an application right now (which I didn't build I should add), which contains a navigation list entry which triggers an insert into a table (via a before header process fired by a request value which is set when the link is clicked.
    I've had a look through the forum's search function for references to "links", "clicks", "double clicks" and "Disabled" and came up with lots of suggestions regarding disabling a button and links in reports, but nothing for links from navigation lists:
    e.g. {thread:id=9405085}
    Note that some of the example suggest using the javascript pseudo-protocol. I want to avoid that method at all costs.
    Rather than verbosely explain the problem, I've set up a demo page on apex.oracle.com to demonstrate it:
    Workspace: JC_DEMO
    Username: DEMO_USER
    password: demo
    the pages in question are 9999 and 10000.
    (p.s. I knocked this example up as fast as I could - the app hasn't been done to my usual standards! :-) )

    Okay I've solved this, or at least I've provided a solution to this particular problem on my "real" app - will amend the test case accordingly in due course but thought I'd share it on this thread anyway.
    1) List Template: I took a copy of the existing List template and edited it. Under the "Sub List Entry" section, I amended both the "Sub List Template Current" and "Sub List Template Noncurrent" entries to the following:
    <li><a class="#A02#" href="#LINK#">#TEXT#</a></li>In other words, I added a reference to "User Attribute No.2" (#A02#). The reason I used A02 is due to having already used A01 already for something else. Don't be too concerned about this.
    2) List: I amended the "List Template" of my list to point at the amended template from step 1. Note also that my list is referenced in a list region on page Zero.
    3) List Entry: I amended the list entry I wanted to disable double-clicks, Adding the following text to the 2nd entry in the "User Defined Attributes" section:
    single_clickFrom step 1, you should note that this has the effect of adding the class "single_click" to the list entry. "single_click" is not referenced in any of my CSSs incidentally.
    4) Page Ready Javascript: On Page Zero, I have a "Before Footer" region called "Page Ready Javascript", into which I put javascript that I want executed on page ready. The basic template for this region is as follows:
    <script>
       try{
          $(function() {
          /* code you want to execute */
       catch(e){
         /* error catching code */
    </script>Within the page ready function (starting with '$'), I have the following code:
    $(".single_click").click( function(){
        window.location = $(this).attr('href');
        $(this).unbind('click'); /* do this because .click adds to the existing click event */
        $(this).click( function(){
           return false;
        return false;
      });Note that I'm using the "single_click" class as my jquery selector. The result of all of this is that, if you click on the relevant link in my navigation list, no matter how many times you do, it will only request the page once.
    Already I can see a few things I'm not happy about but its at least a reasonable starting point. Comments/critiques welcome.

  • SRM Purchase Order Smartform

    Hi all,
    I am having an issue in SRM 5.0.How to get the Purchase Order Amendment details in SRM Smartforms. In ECC we are using a function module to list the amendment details is there any function module in SRM which can do this. Please help me. This is a very very very urgent issue.
    Sure points will be awarded
    Thx in Adv...........
    Regards
    Pavan Kumar

    never mind, went to wrong thread
    Edited by: Rainer Hübenthal on Mar 17, 2010 12:26 PM

  • SAP Standard report for Purchase order Amendments

    Hello MM Gurus,
            Kindly let me know whether any standard report available in SAP on
    Purchase order amendments.
    Regards
    Yoga

    Hi Yoga,
    You can do a small work around.
    Activate version management in PO.
    Then, you can get the list of changed POs from the transaction ME2N, by clicking on the dynamic selection icon (icon with 3 colored lines) and entering values for the "Version" field.
    You can enter multiple values there, say, 1,2,3..5, depending on the maximum number of versions that will be created.
    This selection will give you the list of amended POs.
    Regards
    sampath

  • Ordering BT FTTPoD

    So as someone that works from home i've recently met the criteria to get a grant of up to £3000 to install faster broadband for my work.
    I'm on the Bromsgrove exchange, cab 34. I am extremely happy with the BT service since getting FTTC and would like to continue with BT, however there seems to be no way to order FTTP from them?
    Any assistance would be nice as i'd like to make use of the grant whilst available.

    Hi neosis666,
    Depending on your location you may need a lot more that the £3000, viz :-
    Price list
    Product line:
    Super-fast Fibre Access
    First level product:
    Fibre to the Premises (FTTP)
    Second level product:
    FTTP on Demand
    Version:
    N/A
     FTTP on Demand 
    FTTP on Demand Connection and Rental Charges 
    Feature Note Operative date Until Fixed Connection£ Exc VAT Annual Rental£ Exc VAT
    Up to 330Mbit/s/30Mbit/s
    Note 1
    29/04/2013
    30/04/2014
    500.00
    456.00
    Up to 330Mbit/s/30Mbit/s
    Note 1
    01/05/2014
    750.00
    1,188.00
    FTTP on Demand Distance Based Charge
    N.B. This variable connection charge will be raised in addition to the fixed connection charge
    96% of premises are expected to be within 2km of the nearest NGA Aggregation Node, and these will be covered by distance bands A to G.
    Approximately 4% of premises are 2km or further from the exchange, and although we are able to provide service to these premises, the costs to do so reflect the greater distances over which we would need to build the network to provide service.
    Feature Distance Range - From Distance Range - To Note Operative date Until Price£ Exc VAT
    Band A
    0m
    199m
    Note 2
    29/04/2013
    30/04/2014
    200.00
    Band B
    200m
    399m
    Note 2
    29/04/2013
    30/04/2014
    600.00
    Band C
    400m
    599m
    Note 2
    29/04/2013
    30/04/2014
    1000,00
    Band D
    600m
    799m
    Note 2
    29/04/2013
    30/04/2014
    1400.00
    Band E
    800m
    999m
    Note 2
    29/04/2013
    30/04/2014
    1800.00
    Band F
    1000m
    1499m
    Note 2
    29/04/2013
    30/04/2014
    2500.00
    Band G
    1500m
    1999m
    Note 2
    29/04/2013
    30/04/2014
    3500.00
    Band H
    2000m
    2999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band I
    3000m
    4999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band J
    5000m
    7999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band K
    8000m and above
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band A
    0m
    199m
    Note 2
    01/05/2014
    350.00
    Band B
    200m
    399m
    Note 2
    01/05/2014
    1,050.00
    Band C
    400m
    599m
    Note 2
    01/05/2014
    1,750.00
    Band D
    600m
    799m
    Note 2
    01/05/2014
    2,450.00
    Band E
    800m
    999m
    Note 2
    01/05/2014
    3,150.00
    Band F
    1000m
    1499m
    Note 2
    01/05/2014
    4,375.00
    Band G
    1500m
    1999m
    Note 2
    01/05/2014
    6,125.00
    Band H
    2000m
    2999m
    Note 2
    01/05/2014
    Terms On Application
    Band I
    3000m
    4999m
    Note 2
    01/05/2014
    Terms On Application
    Band J
    5000m
    7999m
    Note 2
    01/05/2014
    Terms On Application
    Band K
    8000m and above
    Note 2
    01/05/2014
    Terms On Application
    Transaction Charges 
    Feature Operative date Connection£ Exc VAT
    CP to CP migration at end of the contract period
    12/07/2010
    See GEA-FTTP Products price list
    NTE Shift - Relocation of existing NTE
    01/09/2010
    See Service Products price list
    Cancel/Amend/Modify - order notes amend, order cancellation, Care Level
    01/09/2010
    See GEA-FTTP Products price list
    VLAN moves applied to GEA Cablelink Modify transactions
    22/11/2011
    See GEA-FTTP Products price list
    Right When Tested - Charge for submitting a trouble ticket proved RWT via the SMC
    01/09/2010
    See LLU Products price list - MPF Standard Line Test
    Right When Tested - Charge for clearing a trouble ticket proved RWT in the Network
    01/09/2010
    See LLU Products price list - MPF Network RWT
    Customer Premises Equipment Replacement - Replacement of damaged or missing ONT
    01/09/2010
    See GEA-FTTP Products price list
    Cancellation and Cessation Charges 
    Feature Note Operative date Charge£ Exc VAT
    Cancellation up to KCI2+5 days
    29/04/2013
    0.00
    Cancellation between KCI2+6 days and the Point of No Return (PONR)
    29/04/2013
    The full connection charges would be raised as a cancellation charge
    Service cessation within contract term
    Note 3
    29/04/2013
    The rental charges for the remaining contract term will be charged
    Service cessation outside of contract term
    01/04/2011
    See GEA-FTTP Product price list
    Best regards,
    dfenceman

  • BT FTTP on demand

    Hello
    I would like to ask if it is possible to order FTTP on demand and how one would go about doing so.
    Thank you
    Rosin_Ddu

    What is the attraction of FTTPoD for you ?  Have you considered bonding multiple FTTC lines as that would be much cheaper.
    To save your searching here are the costs :-
      Export to Excel
    Price list
    Product line:
    Super-fast Fibre Access
    First level product:
    Fibre to the Premises (FTTP)
    Second level product:
    FTTP on Demand
    Version:
    N/A
     FTTP on Demand 
    FTTP on Demand Connection and Rental Charges 
    Feature Note Operative date Until Fixed Connection£ Exc VAT Annual Rental£ Exc VAT
    Up to 330Mbit/s/30Mbit/s
    Note 1
    29/04/2013
    30/04/2014
    500.00
    456.00
    Up to 330Mbit/s/30Mbit/s
    Note 1
    01/05/2014
    750.00
    1,188.00
    FTTP on Demand Distance Based Charge
    N.B. This variable connection charge will be raised in addition to the fixed connection charge
    96% of premises are expected to be within 2km of the nearest NGA Aggregation Node, and these will be covered by distance bands A to G.
    Approximately 4% of premises are 2km or further from the exchange, and although we are able to provide service to these premises, the costs to do so reflect the greater distances over which we would need to build the network to provide service.
    Feature Distance Range - From Distance Range - To Note Operative date Until Price£ Exc VAT
    Band A
    0m
    199m
    Note 2
    29/04/2013
    30/04/2014
    200.00
    Band B
    200m
    399m
    Note 2
    29/04/2013
    30/04/2014
    600.00
    Band C
    400m
    599m
    Note 2
    29/04/2013
    30/04/2014
    1000,00
    Band D
    600m
    799m
    Note 2
    29/04/2013
    30/04/2014
    1400.00
    Band E
    800m
    999m
    Note 2
    29/04/2013
    30/04/2014
    1800.00
    Band F
    1000m
    1499m
    Note 2
    29/04/2013
    30/04/2014
    2500.00
    Band G
    1500m
    1999m
    Note 2
    29/04/2013
    30/04/2014
    3500.00
    Band H
    2000m
    2999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band I
    3000m
    4999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band J
    5000m
    7999m
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band K
    8000m and above
    Note 2
    29/04/2013
    30/04/2014
    Terms On Application
    Band A
    0m
    199m
    Note 2
    01/05/2014
    350.00
    Band B
    200m
    399m
    Note 2
    01/05/2014
    1,050.00
    Band C
    400m
    599m
    Note 2
    01/05/2014
    1,750.00
    Band D
    600m
    799m
    Note 2
    01/05/2014
    2,450.00
    Band E
    800m
    999m
    Note 2
    01/05/2014
    3,150.00
    Band F
    1000m
    1499m
    Note 2
    01/05/2014
    4,375.00
    Band G
    1500m
    1999m
    Note 2
    01/05/2014
    6,125.00
    Band H
    2000m
    2999m
    Note 2
    01/05/2014
    Terms On Application
    Band I
    3000m
    4999m
    Note 2
    01/05/2014
    Terms On Application
    Band J
    5000m
    7999m
    Note 2
    01/05/2014
    Terms On Application
    Band K
    8000m and above
    Note 2
    01/05/2014
    Terms On Application
    Transaction Charges 
    Feature Operative date Connection£ Exc VAT
    CP to CP migration at end of the contract period
    12/07/2010
    See GEA-FTTP Products price list
    NTE Shift - Relocation of existing NTE
    01/09/2010
    See Service Products price list
    Cancel/Amend/Modify - order notes amend, order cancellation, Care Level
    01/09/2010
    See GEA-FTTP Products price list
    VLAN moves applied to GEA Cablelink Modify transactions
    22/11/2011
    See GEA-FTTP Products price list
    Right When Tested - Charge for submitting a trouble ticket proved RWT via the SMC
    01/09/2010
    See LLU Products price list - MPF Standard Line Test
    Right When Tested - Charge for clearing a trouble ticket proved RWT in the Network
    01/09/2010
    See LLU Products price list - MPF Network RWT
    Customer Premises Equipment Replacement - Replacement of damaged or missing ONT
    01/09/2010
    See GEA-FTTP Products price list
    Cancellation and Cessation Charges 
    Feature Note Operative date Charge£ Exc VAT
    Cancellation up to KCI2+5 days
    29/04/2013
    0.00
    Cancellation between KCI2+6 days and the Point of No Return (PONR)
    29/04/2013
    The full connection charges would be raised as a cancellation charge
    Service cessation within contract term
    Note 3
    29/04/2013
    The rental charges for the remaining contract term will be charged
    Service cessation outside of contract term
    01/04/2011
    See GEA-FTTP Product price list
    Notes:
    1)  Repair Service LevelsDetails can be found under Service Products section of the price list, that can be found at: http://www.openreach.co.uk/orpg/pricing/serviceproducts.do
    2) The FTTP on Demand Distance Based Charge is the variable connection charge which will apply to all FTTP on Demand orders in addition to the fixed connection charge.  Openreach will calculate the relevant distance band for an Order using the radial distance from the relevant aggregation node and calculated using the details recorded by Openreach.
    3) Holding to Term Charges become due when a Service is ceased before the expiry of any minimum term for that Service.  The minimum term period for FTTP on Demand is 36 months.
    Other Charges - For Time Related Charges (applicable to Out of Hours Visits, Abortive Visits, Equipment Testing, etc.) refer to the Service Products section of the price list, that can be found at: http://www.openreach.co.uk/orpg/pricing/serviceproducts.do
    Excess Construction Charges may apply, and are detailed in the Service Products section of the price list that can be found at:
    http://www.openreach.co.uk/orpg/home/products/pricing/loadPricing.do
       Back to top
    Date: 28 January 2014
    British Telecommunications plc
    Registered office:
    81 Newgate Street
    London EC1A 7AJ
    Registered in England and Wales No. 1800000
    www.openreach.co.uk
    Best regards,
    dfenceman

  • Basic question: sending patch, bank changes in Logic Pro 7.1

    I find that when I use Logic's Track Mixer to assign patch and bank information to a midi track, my sound modules (usually an old Roland SC-8820 and a new Korg Micro X) play what they are supposed to (though I don't have a multi-set for the Korg yet, working on one). But when I save my Logic song, close Logic and reopen the song, the correct patch and bank info is not necessarily sent to the synths. The Track Mixer correctly shows my patch and bank settings (in the CC#00 and CC#32 boxes, etc.) but these banks and patches don't play -- unless and until I go ahead and click in those MSB or LSB boxes in the Track Mixer. I don't have to change anything, just click. Then apparently the Track Mixer sends the patch information and my synths play what they are supposed to play. Is this the way Logic always works? Is there anything else I can or should check or uncheck? (It's a drag, when working on a song with a lot of tracks, to have to click every track again every time to get the right patches playing.)
    G4 Dual   Mac OS X (10.4.8)  
    Powerbook   Mac OS X (10.4.8)  

    Thanks for the suggestions, but things still aren't working. To implement what I think you are recommending:
    In the Logic Pro menu, Preferences, MIDI submenu, Reset Message tab, there is a checkbox for "Send Used Instrument Settings on Reset." I've checked it.
    In the File Menu, Song Settings, MIDI submenu, General tab, there is a "After Loading Song Send __ Used instrument MIDI settings" checkbox. I've checked it, too.
    But with both checkboxes checked, I still don't get the right patches when the song loads -- yet, as before, just clicking in either MSB or LSB boxes in the track mixer seems to send the values I've previously put in those boxes, and the song plays as it should.
    As to the other idea: by "insert the instrument settings into the beginning of each track," I am thinking that you mean choose "Insert Instrument Settings as Events" from the MIDI menu in the arrange window. Went there, did that. But for some reason after I do so my events list gets amended to show the patch I've selected for that track in the Track Mixer, but not the MSB or LSB -- CC#00 or CC#32-- settings I entered in the Track Mixer.
    Suggestions?
    Powerbook   Mac OS X (10.4.8)  
    Powerbook   Mac OS X (10.4.8)  
    Powerbook   Mac OS X (10.4.8)  

  • Amending script to read list of computers, run script and output to log file

    Hello all,
    I have cobbled together a script that runs and does what I want, now I would like to amend the script to read a list of computers rather than use the msg box that it is currently using for the strcomputer, if the computers doesn't respond to a ping, then
    log that, if it does continue with the script and when it is complete, log a success or failure. I have just started scripting and would really appreciate some help on this one,thanks. I created the script to fix an SCCM updates issue and failing task sequences,
    so it may prove useful to others.
    There are msg box entries that can be removed that were originally in there for the user running the script.
    'setting objects
    Dim net, objFSO, shell
    Dim objFile, strLine, intResult
    Set objnet = CreateObject("wscript.network")
    Set objFSO = CreateObject("scripting.filesystemobject")
    Set objshell = CreateObject("wscript.shell")
    strfile = "c:\wuafix\wuafix.vbs"
    strUser = "domain\user"
    strPassword = "password"
    'getting server name or IP address
    strComputer=InputBox("Enter the IP or computer name of the remote machine on which to repair the WUA agent:", "Starting WUA Fix")
    'check to see if the server can be reached
    Dim strPingResults
    Set pingExec = objshell.Exec("ping -n 3 -w 2000 " & strComputer) 'send 3 echo requests, waiting 2secs each
    strPingResults = LCase(pingExec.StdOut.ReadAll)
    If Not InStr(strPingResults, "reply from")>0 Then
    WScript.Echo strComputer & " did not respond to ping."
    WScript.Quit
    End If
    'Check if source file exists
    If Not objFSO.FileExists(strFile) Then
    WScript.Echo "The source file does not exist"
    WScript.Quit
    End If
    MsgBox "The WUA Fix is in process. Please wait.", 64, "Script Message"
    'mapping drive to remote machine
    If objFSO.DriveExists("Z:") Then
    objnet.RemoveNetworkDrive "Z:","True","True"
    End If
    objnet.MapNetworkDrive "Z:", "\\" & strComputer & "\c$", True
    'creating folder for install exe on remote machine
    If (objFSO.FolderExists("Z:\wuafix\") = False) Then
    objFSO.CreateFolder "Z:\wuafix"
    End If
    'copying vbs to remote machine
    objFSO.CopyFile strFile, "Z:\wuafix\wuafix.vbs"
    'set command line executable to run a silent install remotely
    strInstaller1 = "cscript.exe c:\wuafix\wuafix.vbs"
    'strInstaller2 = "c:\wuafix\wuafix.vbs"
    strExec = "c:\pstools\PsExec.exe "
    'objshell.Run strExec & " \\" & strComputer & strInstaller1
    On Error Resume Next
    result = objshell.Run(strExec & " \\" & strComputer & " " & strInstaller1)
    If Err.Number = 0 Then
    WScript.Echo "PSXEC Runing WUA fix remotely"
    Else MsgBox Err.Number
    MsgBox result
    End If
    Set objWMIService = GetObject("winmgmts:" _
    & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
    Set colLoggedEvents = objWMIService.ExecQuery _
    ("SELECT * FROM Win32_NTLogEvent WHERE Logfile = 'Application' AND " _
    & "EventCode = '4'")
    Wscript.Echo "Event Viewer checked and Fix Applied:" & colLoggedEvents.Count
    MsgBox "Removing mapped drive Please wait.", 64, "Script Message"
    If objFSO.DriveExists("Z:") Then
    objnet.RemoveNetworkDrive "Z:","True","True"
    End If
    MsgBox "The WUA Fix has been applied.", 64, "Script Message"
    quit
    wscript.quit
    Any help appreciated and explanations on the process would be great as I would like to learn the process involved, which is difficult when working during the day.
    many thanks

    Hi Bill,
    long story short, I have approx. 2800 clients with an old entry in WMI for updates that the sccm client cannot clear or run because they do not exist anymore, so the client will not run updates or use a task sequence because of this, so my script fixes this
    and does a couple of other things, I have found another way to do this by running  a different script that uses WMI to call a cscript function that uses the wuafix.vbs that is coped to the machine, I am also changing the echo entries to output to a log
    file instead so that I can track what client has run the fix andn which ones haven't.
    If you have any suggestions then please let me know, nothing nefarious :)
    many thanks

  • Amending List content (deleteing & renaming) - Effect on previous created work items/reporting

    Hi, 
    I going to be changing the naming and structure of support groups and incident tier groups. I'd like to know what effect this has on all previously created work items and the reporting on those work items. 
    In addition, I am also adding list items to impact and risk list to change incident prioritisation settings and want to know the effect it will have on the live work items and historical work items.
    Cheers,
    Pete

    When you're thinking about editing enums in a live system, it's important to know a little but about how they work on the back end. 
    each enumeration entry essentially breaks down into a GUID and a display string; there are other properties, like Parent, Ordinal, InternalName etc, but those don't come in right now. when you use a console form to look at an incident, the control reads
    the GUID that is stored on the incident in the property in question, and then goes and collects the list that property references, and shows you the correct display string for your language. the specifics are not important, but the fact that what's stored
    on the incident is that system generated GUID is. when you edit a list, each entry has a unique GUID, that can't be changed or seen through the UI.
    Adding a new entry will add a new guid and a new display string. this option will be available the next time the form is opened. this works pretty much the way you would expect it to. 
    Renaming an enumeration keeps the GUID the same, but changes the display string. any incident with that GUID will see the new string, and the data warehouse will be updated with the new string, so
    historical incidents that had that value will now have the new display string.
    Deleting an enumeration will remove the entry from the list and break the mapping of that guid to the display string, but does nothing to the incidents that have that guid on them. the net-net of this is that any incident with that guid
    will have a value (i.e. not null) but it won't have anything to show to analysts, so it will look like it isn't set. the datawarehouse keeps those mappings even after they are deleted, so removing a mapping will not affect reporting. 
    the end of this is that you should re-classify any items before deleting an enumeration, you should only rename an enumeration if that new name makes sense for all work items for all of history. it is possible to reorder enumerations while keeping their
    GUIDs, but it requires some XMLing. I've posted about it elsewhere in this forum, so let me know if you need a link

  • Unable to amend contact list after upgrade to 6300...

    I upgraded my 6300 to the latest release which was 6.01. I had to do this as the phone would not talk to the latest release of PC Suite and fortunately I had another computer with an olfer version. I now find I can not edit or add contacts. Any ideas please?
    J T Webb

    Hi,
    thanks for responding.
    The phone is a 6300 RM-216 with v06.01 SW. The problem is confined to the contacts list and when I was blue toothing all the entries into a PDA one entry caused the phone to 'white screen' and recover after a while. It had some rubbisg in it. Deleting that entry did not fix the problem! All other features are working OK. The problem is the same on both computers even though they have different issues of PC Suite. The one on my laptop is the latest and the one on this computer is 6.86.9.3. Both computers are running up to date XP Pro. I have not tried deleting the whole contact list yet as I have taken a free upgrade and when that arrives I will be able to play freely! I have two other computers but have not tried with their PC Suite but guess it would make no difference. My belief is the contact file is corrupt which leaves the question as to how do I 'splat' it and start again? Can play freely later today!
    J T Webb

  • I am unable to send mail on my IPad because the iPad ignores the single correctly configures outgoing server and instead looks for long since deleted outgoing server which is not listed in my settings at all.

    Some time ago I used to use an outgoing mail server, which I will call 'XYZ'.  However I changed email providers and now have a new outgoing server which I will call 'ABC'. I tried deleting that old outgoing server when I changed email providers but had problems doing so.  So what I did was completely delete all email accounts from my iPad and then reinstalled the two new email accounts from scratch, complete with the new outgoing server 'ABC'.  That appeared to be successful, and I can receive email OK.  Also the new server 'ABC' is the ONLY outgoing server listed in my settings on either account
    However despite the new server being the only one in my settings the iPad will not send mail and shows an error message saying that the settings for the OLD server 'XYZ' are incorrect.  I cannot amend or delete that server as it has already been deleted and is not listed in my settings.
    It is like the iPad is somehow still remembering that old server and thinks it's the primary one.  Or it's getting old server info fron iCloud or something.
    My iPhone has the same two email accounts and identical settings and does not have this issue.
    Any ideas, other than a complete factory reset?
    Many thanks
    Rob

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Click Check Again and post the text that appears. Anonymize any personal information before posting.

  • Yahoo mail new style - My contact list will not work on FIREFOX anymore but does on IE

    on Firefox 5 my contact list will not load and cannot be used
    the address bar goes haywire if you make a mistake , making it difficult to amend or correct - ie. sends mail to draft's box - will it be fixed anytime soon or do i need to use IE for Yahoo Mail now they have cancelled old classic version that worked reasonably well on firefox

    Me too, 23 July 2011. Can get YahooMail contacts in IE but not in Firefox. What is going on and who will fix it?

  • Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status

    Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
    of status?  I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
    I'm trying to get the following info for each Service Requests
    SR ID (i.e. SR1234)
    Affected User
    Title
    Description
    Priority
    Source
    Area
    Support Group
    Assigned To
    Created By and Created On
    I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations. 
    Thanks
    ** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report.  If you've ever
    worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
    spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.

    the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1

  • Reminder does not work properly, when using multiple lists

    I am using Reminders on my iPhone 5 with iOS 6.1.. I am using several Lists for Reminders, such as Job, Home, General et cetera.. Everytime I am not using the standard List, set a Reminder in the future and save the event, the event will be displayed on the standard List with the current timing. Very annoying as I need to amend the Reminder for a second time.

    I opened my Word for Mac 2011, opened a document, and Then opened my Dashboard on top of that and used the Dictionary to look up a definition, and changed the month on the Calendar widget, and changed my stock graph interval.  It all worked just as it was supposed to: fine.  You apparently have a corrupted file somewhere.  I do not know where.
    Hope this helps

  • Powershell Iterate through webs and lists to get Document ID Value of first item

    After some some trial and error I came up with the follow script. But it's so slow! And seems to be missing my document centre - it has about 80000 items in it.
    Two questions: Can I make this quicker? and why can't it handle getting results from the document centre?
    $webs = (Get-SPSite "http://portal...." | Get-SPWeb -Limit all -ErrorAction SilentlyContinue)
    if($webs.count -ge 1 -OR $webs.count -eq $null)
    foreach($web in $webs)
    $lists = $web.Lists
    foreach($list in $lists)
    if ($list.BaseType -eq "DocumentLibrary" -OR $list.BaseType -eq "GenericList")
    $item = $list.Items[0]
    if (($item -ne $null) -and ($item["Document ID Value"] -ne $null))
    $finalstring = $item["Document ID Value"].ToString()
    write-output $finalstring | Out-File "C:\scripts\results.txt" -append
    $web.Dispose()

    I thought that pointing to items[0] would literally just grab the first item.
    So what do I do here? How can I use an spquery in my code? I'm confused in the order and the exact sytax I would use the spquery.
    Thanks for you help so far Alex.
    Edit: Amended my code, is this correct?
    Add-PSSnapin Microsoft.Sharepoint.PowerShell
    $webcount = 0
    $listcount = 0
    $itemcount = 0
    $itemid = ""
    $TimeStamp = Get-Date
    $Date = $TimeStamp.ToShortDateString()
    $Time = $TimeStamp.ToShortTimeString()
    $webs = (Get-SPSite "Http://portal..." | Get-SPWeb -Limit all -ErrorAction SilentlyContinue)
    $query = New-Object Microsoft.Sharepoint.SPQuery
    $query.Query = "<Where><IsNotNull><FieldRef Name='ID'/></IsNotNull></Where>,<OrderBy><FieldRef Name='_dlc_DocId' Ascending='True'/></OrderBy>"
    $query.ViewFields = "<FieldRef Name='_dlc_DocId'/>"
    if($webs.count -ge 1 -OR $webs.count -eq $null)
    foreach($web in $webs)
    $lists = $web.Lists
    foreach($list in $lists)
    if ($list.BaseType -eq "DocumentLibrary" -OR $list.BaseType -eq "GenericList")
    $listcount += 1
    $items = $list.GetItems($query)
    foreach ($item in $items)
    if ($item["_dlc_DocId"] -ne $null)
    $itemid = $item["_dlc_DocId"].ToString()
    if ($itemid -ne "")
    $itemcount += 1
    $finalstring = $Date + " ; " + $Time + " ; " + $web.url + " ; " + $list.title + " ; " + $itemid
    write-output $finalstring | Out-File "C:\scripts\results.txt" -append
    break
    $webcount += 1
    $web.Dispose()
    Write-Host "Amount of Webs checked:"$webcount
    Write-Host "Amount of Document Library Lists:"$listcount
    Write-Host "Amount of valid IDs:"$itemcount

Maybe you are looking for