List of forms open

Is there anyway to get a list of open forms in run time?

I know of no built-in way to find out, at runtime, what forms are open. I guess you will have to write code to keep track of when you open and close forms and maintain a list that way yourself.

Similar Messages

InfoPath form opens in the browser instead of InfoPath Filler when a link is clicked from the Approval Task email

I have an admin approved InfoPath 2010 form that is web enabled. It is published to a SharePoint 2010 Forms library and an Approval Workflow is attached to it.
The form needs to open up in the InfoPath Filler with the Workflow Task bar at the top so users can approve the task from within the form and not go to Tasks list to do so.
Here's a problem I am experiencing: sometimes the form opens in InfoPath Filler and sometiems it opens in the browser when the link to approve the form is clicked form the email that is sent by the workflow.
Windows 7, IE 9, MS Office 2010:
The form opens up in InfoPath filler like it supposed to. The Workflow task bar is there for users to approve the form.
Surface Pro with Windows 8.1, IE 11 and MS Office 2013
The form opens up in the browser and there is no Workflow task bar at the top.
Things that I've already looked at and tried which didn't solve the issue:
- The forms library is exclusivly set to open documents/forms in the Client Application
- Set the browser compatibility mode in IE 11, that doesn't work too well, because you have to do it every time you open the browser.
- Setting browser compatility in IE 11 reintroduced another issue, of multiple login promts, which was fixed by entering the SharePoint site in question into the Trusted sites by a group policy. Adding the site to trusted sites made the forms open up in the
browser.
- Researched compatibility issues with InfoPath and Windows 8.1, cannot find anything.
- Researched compatibility issues with InfoPath 2010, Windows 8.1 and SharePoint 2010, also didn't find anything.
Can someone offer a suggestion on how to fix this problem, preferably with no code, because we are not allowed to put custom code on the server?
I need to force InfoPath form to open in InfoPath Filler when the link to the form is clicked from the Workflow email. Also the login prompts should not pop up. Need it to work on all the platforms: Windows 7, and Surface Pro Windows 8.1.
Thank you.

Hi,
Thank you for your response.
[Steps about how to capture the capture the fiddler log]
===========================================
1. Download fiddler from
http://fiddler2.com/
2. Install fiddler and launch fiddler.
3. When the fiddler be launched, the log will be enabled automatically.
4. You can click “X” to remove all the records before you reproduce the issue.
5. If the web site has been configured to https. Please enable https option:
Click “Tools” -> “Fiddler Options”
Switch to HTTPS tab, then check “Capture HTTPS CONNECTs” and “Decrypt HTTPS traffic”.
6. Then repro the issue.
7. Click “File”->”Capture Traffic”, uncheck the Option “Capture Traffic” to make sure the “
” is not shown, that mean the logs has been stopped.
8. Click “File”->”Save” ->”All sessions”, save the file.
Any quesitons, please let me know.
Best Regards,
Dats Luo

SAP Cloud SDK : Create Quick or List Modification form require in Embed Component

Hi Experts,
I need requirement to create the quick create or List Modification in embed component.
I have already make button for "Quick Activity" but i need quick create or List Modification from.
I have also try using the following blog.
How to create a List Modification Form?
I have follow the steps.
1) Go to embed component select the "DataModel" and select "DataList" right click on it and select "Add List Modification Structure".
2) Now from the right side selected BOModel Drag and Drop the element you want to display in the Form and bind correctly.
3) Now go to Designer tab and from the "Toolbar" double click on "ListModficationForm" from the Panes.
4) Once the ListModificationForm open in designer open the BO browser and select the Data Model tab.
5) Drag and Drop the element from the newly created "List Modification Structure" in previous steps and under the property window under the "Associated List Modification Structure" select the created List modification structure from the Root.
6) Now create event handler to call this form and under the event add operation "ListModification" and select the operation "Start" and under the List Modification Structure select the created structure from Root.
7) I have assign this event in Add button OnClick Property when i activate and Test it. i getting dump.
Please suggest me in the above steps i have mentioned any step missing or any steps i have do the wrong configuration.
I have create the Custom business object with "Object Based Screen" ( QA, QIF, QWL , PTP,WCF, WCView.
so i try using Quick Create QC using creation of screen but i dont know what the configuration require to call QC from embed component.
Please suggest me if anyone have idea about this 2 solutions.
Many Thanks,
Mithun

Hi Horst,
well, it was just an experiment to test the list modification after the blog entry was published.
So I did not test it extensively.
However, to answer your question:
I did manage to add two items to a list using the Browser, without any perceived anomalies (no dumps or such).
But that's where I stopped experimenting with this feature.
Best regards,
Ludger

So this is new... InfoPath 2013 on SharePoint 2013: Create a New Custom List, Edit Form in InfoPath, Attempt to Publish and...

InfoPath blows up with an error message saying "Invalid form template"...
No, I do not have any added data connections in the form.
No, I have not added any fields or done any modifications of any kind to the form.
I am doing exactly these steps:
Open SPD
Create a New Custom List
Open List in SPD
Click "Design Forms in InfoPath" (Item)
Form opens in InfoPath 2013
Click Publish (or Quick Publish...doesn't matter)
See error message
This wasn't a problem in my environment liiike, a week ago..? The only thing that's different is that I installed some security patches on the servers this morning...
KB2737989
KB2956153
KB2956180
KB2881078
KB2760361
KB2956175
KB2956183
KB2956143
KB2920731
KB2956181
KB2760554
KB2760508
KB2880473
KB3048778

Hi ramz,
Also you can try to check if there are more useful ULS logs related to InfoPath issue according to the time of this error "Invalid form template" occured, it could help troubleshoot the issue.
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

List/Menu Form hides Main nav dropdown

I've created an html page that when you scroll over the main
nav bar at the top, the drop down, or 2nd level headers, drop down
'behind' a list/menu form? Any ideas on how to fix this?

There are only two options, since list/menus are "ACTIVE
CONTENT" and
therefore always rise to the top of the page since they are
always being
redrawn by the browser -
1. Redesign the page so that you move the list/menu out of
danger, or
2. Create some custom js to hide the list/menu when that
particular submenu
opens
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Lerbekmo" <[email protected]> wrote in
message
news:enmi0u$2hs$[email protected]..
> I've created an html page that when you scroll over the
main nav bar at
> the top, the drop down, or 2nd level headers, drop down
'behind' a
> list/menu form? Any ideas on how to fix this?
>

Use a list item to open a new window with a web address

Hi
I would like to create a list entry which opens a new windows and directs that window to a specific website. I have tried creating the list entry and it works except it is redirecting to the web site in the current window.
at the moment in the list entry options under "Target" I have the following
Target typ: URL
URl: http://www.somewhere.com
Many thanks for your help.

Yes there is. You will need to write your own javascript function using window.open(), which has lots of parameters that control size, scroll bar, menus etc. Do not be tempted to put window.open directly into the URL because it causes problems.
Do a Google on javascript window.open and you should get all the info you need.
Another approach is to do a[b] file > save as in apex and then examine the JS files that are downloaded. You can call any of these javascript functions from apex and a number of them open windows in one form or another.
I can knock something together for you if you struggle.
Simon

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

   VALUES
    ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
      <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

How to redirect from list edit form to another page using jquery in sharepoint 2013

hi friends i have been trying to find a way to redirect from list edit form to another page using javascript and jquery
i found lot of codes online but non of them are working for me.
what i need is i have to save the data in the form and after that it has to redirect to another page. it has to get the url from hyperlink field of the item.
please help me in this regards

Not sure if you have gone through below links:
http://spservices.codeplex.com/wikipage?title=%24().SPServices.SPRedirectWithID
http://blogs.askcts.com/2013/02/18/using-spservices-and-jquery-to-perform-a-redirect-from-a-sharepoint-list-newform-to-editform/
Please ensure that you mark a question as Answered once you receive a satisfactory response.

How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?

When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever I open FF -- essentially each tab loads twice -- as app tab and large tab. How can I delete tabs from the list of "auto-open" tabs? In addition, for some reason, every time I try to set my home page, it's not working -- I keep getting the same home page regardless of how many times I have tried to set a new one.

You can close a tab with a middle-click or with a left click on the close X on the tab or via the right-click context menu of that tab.<br />
Do those tabs come back if you close then and lose Firefox?

Monthly report listing out ALL open PO

Hi,
As our management requested, we need a monthly report listing out ALL open PO for CDG, APR Someone tell me to input cost centre but it is time consuming to input it as we have over 100 cost centers. Do you know if I can input SPG/profit center or other data to run this report instead ? Please advise the transaction code and how to perform it, such as need to know the profit center #, organization code etc
Thanks
Raja

hi
go to ME2N
then select Scope of list ALV
Selection parameters as WE101 Open goods receipt (select as per ur need )
then execute u will get the list for open po
now if u want it to specify the profit center then go to ME2N and select dynamic selecion (shift +F4)
now u will get a smaal scrren , in purchaseing doc item selct profit center
now u can see the profit center selection field ,give a proper profit center and follow the process as given above
hope it help
regards
kunal

Amount of forms open in the session

Hello all,
I would like to restrict/control the amount of forms open by the user,
as I am using open_form.
I have found nothing in the forms help about that, like a system variable and nothing so far on the web.
A possible workaroung/idea could be to have a global
that I count up on when-new-form-instance
and count down on key-exit.
Did someone have experience that problem ? what do you think ?
I am using Forms 10g R2.
Regards
Frane
PS : I guess an amount of 10 forms open by user, could be a good limit in order to don't get performance problem.

Hello François,
So far that's the only workaround that I found sor far, init the global at my starting, then count up/down.
Do you think a limit of 10 opened forms at the same time is reasonable ?
Thx
Frane
PS : btw bravo about your LAF project !!!!, it rocks the layout, I am testing it at the moment on forms migration 6i=>10g that I have to do (sad that it's not brand new appli/project to do, then layout could be really be review and defined nice from the beginning)

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

How to find list of all open windows?

Hi,
I was wondering how to find a list of all open windows on the
desktop. I have been able to use this to find the number of open
windows in the AIR application:
var windows:Array =
NativeApplication.nativeApplication.openedWindows;
test.text = String(windows.length);
I cant seem to get the list of all open windows on the
desktop though or the names of the windows.
Any pointers would be appreciated.
Thanks!

Thanks anirudhs. I had a feeling this was the case. It just
seemed odd that the built-in function calls like orderToBack() and
orderToFront actually put the AIR windows behind or in front of all
the windows on the desktop. Somehow AIR is finding the list of open
windows on the desktop. I just didnt know if there was some way to
access AIR's way of finding the windows. Guess it must be a
protected function. Thanks!

How to create a Printer List in Forms 4.5

How can I create a Printer list on Forms 4.5 to show all
available printers?
Thanks.
null

I fear there is no direct solution.
May be this is a work-around:
1. Apply the older built-in: Display_item. You can't disable the item with display_item, but you can change the visual attribute and show the user that this item should not be checked.
2. To be shure that the user doesn't ignore this "disable", you need a trigger, which resets the item to the proper value after an illegal change.

How to move cursor to a particular field in a form when the form opens

Hi All,
Using Forms Personalization how to move the cursor to a particular field in a form when the form opens.We are using Oracle Applications 11.5.10.2
Please let me know as soon as possible.
Thanks,
--John.

Hi Satya,
Try the following
Open the forms personalization window
Seq: 10
description : Move cursor
Level : Function
On Condition Tab-
Trigger Event : when-new-item-instance
Trigger Object:- (The field on which the cursor is appearing now when you open the form ) for eg : If I am working on a vendor Master form in that case it would be -VNDR.VENDOR_NAME_MIR.
Processing Mode : Both
Context:
whatever context you want to do it respoansibility level or user level.
On the Actions Tab
Seq: 1
Type: Bulletin
Bulletin type : GO_ITEM
Argument : The field to which you want to navigate to. (In my case I want to navigate to Alternate name on the Vendor master form so it would be VNDR.VENDOR_NAME_ALT_MIR).
see if it works for you.
cheers,
Ankur

List of forms open

Similar Messages

Maybe you are looking for