List of reports in the reporting repository

Hello !
Some time after upgrading to SP15 I have found that there is no more list of reports in the configuration of reporting repository. Is it really so or it is my local problem, connected maybe with errors during installation of SP15 ?

Hi!
It's all ok with your reporting repository configuration, this list was removed. Instead you can activate or deactivate single reports directly in the "Reports" area.
You find it after you turned on advanced mode within the repository manager area under "Related Areas".
It is better to have only one place where you configure a report. I always forgot to enable a report in the repository manager after I created it.
bye, Dirk

Similar Messages

T.code FEBC: the repport list doesn't contain the report RFEBIT00

Hi All,
when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
But the list doesn't contain the report RFEBIT00..... How to add it to the list?
Thanks
Gandalf

Hi,
Please do coordinate with your technical consultant(ABAP) for the reolution.

MSS - Adding a Standard report to the reporting section

Hi All,
I want to add Birthday list report to the reporting section in MSS.
Right now I have ee due to retire report, I want to deactivate this report and add standard Report " Birthday List".
Please guide.
Checked PPMDT, there is no brthday list report. How to add this to the set of reports.?
Regards,
Swati Sahu

the birthday list query had inconsistencies , resolved the inconsistencies and then could see the report in the MSS. For removing a report goto
Personnel management > HRIS > HIS > Define task Functions.
Remove the report entry which is not required. At the same place new reports can be added.
Swati

How to start a report on the reports server from a pl/sql procedure

I would like to start or queue a report on the reports server / cartridge from within a serverside pl/sql procedure along with passing report parameters.
Can I use the package utl_http and if yes, how?
null

Hi,
Before this you have to prepare your internal table with tab delimeter structure with data.
data: wa_appl_title like line of appl_title.
       concatenate fhdr '/file_details_'
                    sy-datum '_' sy-uzeit '.txt' into fhdr.
*MOD01 - start.
       open dataset fhdr for output in text mode." ENCODING DEFAULT.
        open dataset fhdr for output in text mode ENCODING DEFAULT.
*MOD01 - end.
        if sy-subrc = 0.
          clear wa_appl_title.
          read table appl_title into wa_appl_title index 1.
          if sy-subrc = 0.
            transfer wa_appl_title to fhdr.
          endif.
          loop at appl_it.
            transfer appl_it to fhdr.
          endloop.
          close dataset fhdr.
          write: / text-t05.
        else.
          write: / text-t04.
        endif.
After this you view in AL11 tranx.
let us know any thing else you need.
Thanks,
Deepak.

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

I Published a report on the report server but it's not showing in the internal application we use to access reports

Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.

Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

SSRS Application to Retrieve Reports from the Report Server

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
Thanks for the reply. This is a view and [AmountDue] is supposed to be [CurrentDueAmount] + [PastDueAmount] - [PaidAmount]. The view is not calculating [PaidAmount] right . Below is the complete code of the view. Do you see anything wrong in the code ?
Thanks.
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[iff].[FacilityFeeID], [LoanID] = NULL, [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_fee].[SectionType], [Name]
= [iff].[Name], [ReceivedAmount], [dates].[CurrentDueAmount],
[PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply reset to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN 0 ELSE
[pastdue].[PastDueFeeAmount] END, [PaidAmount] = CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN - [pastdue].[PastDueFeeAmount]
ELSE 0 END, [AmountDue] = [unpaid].[UnpaidFeeAmount], [ID] = [iff].[FacilityFeeID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_FacilityFee] iff ON [if].[ID] = [iff].[INV_FacilityID]
JOIN
(SELECT [sis_fee].[ID],
[sis_fee].[SectionTypeCode], [SectionType] = [st_fee].[Name], [sis_fee].[INV_FacilityFeeID]
FROM
[dbo].[INV_SubInvoiceSection] sis_fee JOIN
[dbo].[INV_SectionType] st_fee ON [sis_fee].[SectionTypeCode] = [st_fee].[Code]
WHERE [INV_FacilityFeeID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_fee ON [iff].[ID] = [isis_fee].[INV_FacilityFeeID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedFeeAmount]),
[ReceivedAmount] = SUM([iffa].[ReceivedFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_fee].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT *
FROM
[dbo].[INV_FacilityFeeAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [SectionID],
[PastDueFeeAmount] = SUM([PastDueFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_loan].[SectionType], [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount], [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount],
0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END,
[PaidAmount] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN 0 ELSE CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END END,
[AmountDue] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN [CurrentDueAmount] ELSE [unpaid].[AmountDue] END, [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_loan ON [il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[ExpectedPrincipalAmount]),
[ReceivedAmount] = SUM([ReceivedPrincipalAmount])
FROM
[dbo].[INV_LoanPrincipalAmortization] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanCashInterestAccrual] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidPrincipalAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPrincipalAmortization]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanCashInterestAccrual]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDuePrincipalAmount]), [SectionID]
FROM
[dbo].[INV_LoanPrincipalAmortization]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanCashInterestAccrual]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = 'PIK Interest Applied', [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount] = - [dates].[CurrentDueAmount],
[PastDueAmount] = - CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END, [PaidAmount] = - CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END, [AmountDue] = - [AmountDue], [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL' AND [sis_loan].[SectionTypeCode] = 'LOAN_INT_PIK') isis_loan ON
[il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]

Very urgent :how I order by my report within the report option not change i

Hi master
Sir I design the report but I need my report order by cheq_no now my report order by voucher no but If I change in query then my format must be change that very problem for me I again design
Is any option in report through which I order by my report as per my require column I is if I need on cheq_no , voucher_no or date
Please give me idea how I order by my report within the report option not change in report query
Thanking you
aamir

Use a lexical parameter (see online help):
select ...
order by &sort_parameter

Hi, We are developing quite a few excel worksheet reports. The reports dont show the cells if contain formulas ( when opened in iPad or ipod ), is there any good solutions .

Hi,
We are developing quite a few excel worksheet reports.
The reports dont show the cells if contain formulas ( when opened in iPad or ipod ),
Is there any good solutions .
Thanks.

There is no version of Excel for iPads. iPads come with something that lets you view the contents of Excel files but it implements only the common easy features and there are (literally) hundreds of things you can do in Excel that it doesn't know how to show on the screen, including some functions.
If you intend to work with spreadsheets on an iPad I suggest you buy Numbers for iPad
http://www.apple.com/apps/iwork/numbers/
which understands more (but still not 100%) of the things that Excel does. It is so cheap that you can probably afford to buy a copy just to see whether it does what you want.
If you are doing things with spreadsheets and intend to be primarily working on iPads then I suggest you actually use Numbers on a Mac as well, rather than using Excel at all.

Displaying the list of values in the Report

Hi All,
Is there any possibility to include the scrollable list on the face of report(Not in the left side i.e as input control)
For example If I have a country with different counties.
Based on the country selection in the block it should display the list of counties as scrollable list.
Would it be possible.
Please help
thanks
Edited by: VP S on Sep 1, 2010 2:45 PM

Not sure if you are looking for the same..
Have you tried applying the filter at the filter pane..i.e.
Click on the the show\hide filter pane (filter icon is present nearby the drill icon)
Now drag the required object on this pane.
It will create the dropdown filters on top of the report.
Regards,
Rohit

Display Select list only once in the report

Hi,
select
CLS.NAME "Name",
CLI.SECTION "Section",
CLI.DESCRIPTION "Description",
htmldb_item.select_list(5,R.REVIEWER_CONFIRM,'YES;YES,NA;NA,NO;NO') "Reviewer Confirm",
htmldb_item.text(6,R.REVIEW_COMMENT,60,60) "Reviewer Comment",
R.ID "ID"
from
CHECK_LIST_SUB CLS,
CHECK_LIST_ITEM CLI,
RCL R
where
CLS.CHECK_LIST_SUB_ID = CLI.CLS_ID
and
CLI.CLI_ID = R.CLI_ID and
R.RI_ID = :P21_RI_ID
The above query will return set of rows there is also a select list displayed for each row
I need to restric this select list for each name wise in the result of the report.
select list should not repeat it must be report only once
Please suggest me how to do this
Thanks
Sudhir

Sudhir,
Try this query.
SELECT
CLS.NAME "Name",
CLI.SECTION "Section",
CLI.DESCRIPTION "Description",
CASE WHEN ROWNUM = 1 THEN
     htmldb_item.select_list(5,R.REVIEWER_CONFIRM,'YES;YES,NA;NA,NO;NO')
     ELSE NULL
END "Reviewer Confirm",
htmldb_item.text(6,R.REVIEW_COMMENT,60,60) "Reviewer Comment",
R.ID "ID"
FROM     CHECK_LIST_SUB CLS,
     CHECK_LIST_ITEM CLI,
     RCL R
WHERE     CLS.CHECK_LIST_SUB_ID = CLI.CLS_ID
     AND CLI.CLI_ID = R.CLI_ID
     AND R.RI_ID = :P21_RI_IDThanks,
Manish

SCCM Software Update Reporting - Understanding the Report

I could use some help in understanding what makes a computer compliant and what makes a computer non-compliant in regards to SCCM’s Software Update reporting.
When I look at a report for a compliant computer and a non-compliant computer, I do not see the pattern which would cause a computer to be compliant or non-compliant.
Example for two computers:
For each report, every item with a check mark in the Approved column also has a check mark in the Installed column.
For each report, if there is a check mark in the Is Required column, there are no check marks in the other two columns for that row.
Yet one computer shows as compliant while the other shows as non-compliant.
So in regards to the three columns in a Software Update report, what should be checked or un-checked to indicate whether a computer is compliant or not?
doyle

Okay,
When you run a Compliance 1 report, the resulting report lists three rows:
One row for “Non-compliant”
The second row for “Compliance state unknown”
The third for “Compliant”
Drilling down into each row displays the computers that fall under the three categories above.
Drilling down further on specific computers within each category shows each update on its own row with three columns, “Approved”, “Installed” and “Is
Required”.
I have been assuming that a computer lacking approved updates would fall under the “Non-compliant” report while a computer with all approved updates installed would
fall under the “Compliant” report. (correct?)
With this assumption, I have comparing compliant vs non-compliant computer reports by looking at the “Approved”, “Installed”, and “Is Required”
column of each. But I am not seeing the pattern that would designate one computer has compliant and another non-compliant.
So it is the report (not me) that is telling what is compliant and what is not compliant.
Am I understanding this incorrectly and if so, please fill me in (details would be great)?
db

How can I create a Report with the Report Generation Toolkit?

Hi,
I have installed Labview Report Gerneration Tool for Microsoft Office Version 1.1 and now I want to use MS Office Report Express VI but it need the VI "Dflt Data Dir.vi". I don't have this on my computer, why? Where can I get this VI? Can somebody help me?
thanks Labprog

Hello Labprog
This VI should be located in the file.llb in the folder
..\vi.lib\utility. Thus, it is not part of the report generation
toolkit but of LabVIEW. I am not sure why you are missing that file on
your PC, maybe you just did not find it because it is hidden in a LLB.
Maybe this LLB is not part of your LabVIEW package (Base, FDS, PDS).
Anyway, I'll attatch that little VI, hoping that this is the only one missing.
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Attachments:
Dflt Data Dir.vi ‏11 KB

While preview the report in the reporting server it will show me the password expired?

HI i am working on BIDS 2008R2,
I have deployed my Report soluction in the reporting server,but while i preview the report in my reportig server ,
it will show me the below error ,pls find the scrrenshoot it show the below error
Tell me one thing here i dnt have permisions to view the reports or what,
but while am using windows credntials alos not able to see the reports,
so can you pls help me out for this problem.its urgent basis

Hi Ychinnari,
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. The account is used in the following ways:
Send connection requests over the network for reports that use database authentication, or connect to external report data sources that do not require or use authentication.
Retrieve external image files that are used in report. If you want to use an image file and the file cannot be accessed through Anonymous access, you can configure the unattended report processing account and grant the account permission to access the file.
According to the error message, password of unattended execution account has expired. To troubleshoot the problem, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
If credentials are passed in the connection string, you need to modify password of the connection string.
For more information about Configuring the Unattended Execution Account, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms156302.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

List of reports in the reporting repository

Similar Messages

Maybe you are looking for