List of sap tables

Hi all,
I wanted to display the list of sap tables outside sap. So when i searched through forum i got some relevant FM.
RFC_READ_TABLE, RFC_GET_TABLE_ENTRIES : RFC function modules doesn't help as they only deal with the display of fields in a table and not the entire table list.
When i tried with DB fm, my database is oracle so those doesn't help me too.
Is there any standard program which suits my need.
Can GET_GLOBAL_SYMBOLS fm be used to retrieve the tables list. If so then what should i give as the program (import parameter) and give some guidance to test that fm.
Is there any way to retrieve tables with sort criteria as the application module (MM, SD, etc.)
Pls can anyone help me out.
Thanx in advance,
Revathi.

Hi,
Thanks for both your replies. My major requirement is to get the list of tables for the particular application module i.e . MM incudes certain tables and SD includes its own tables.
Is there any fm or bapi which provides the tables list as per the application module.
Can anybody throw some light on the link between the application module with its tables.
Regards,
Revathi.

Similar Messages

SAP Report Painter - SAP tables for report items and hierarchy

Hello,
can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
What are these tables for Report Painter?
thank you in advance for any info.
Regards,
Jasminka
Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

Hi Jasminika ,
Could you please share with me those tables names where report items and hierarchy are saved
Regards
Neeraj

Table for details of SAP table

Hi all,
in which table that holds all SAP tables for specific Package....
Thanks In advance..

Hi Joe,
check table DD02L u will get list of SAP tables in this table...
hope this may be usefull...
please reward,
regards,
Prashant

List of SAP QIM and EHS Tables?

Please can one of you provide any list of SAP standard tables used by SAP QIM and EHS modules with description?
Thanks,
Rama

Subash:
Sorry for the late response. Was busy in project work.
Here is a list of EHS standard table that can be used for SAP BW & BOBJ report enhancements:
EHHSSD_INC_ROOT - Incident – Root – stores incident IDs
EHHSSD_INC_BINFA - Incident - Basic Information All
EHHSSD_INC_VIOLN - Incident - Violation Notice
EHHSSD_INC_H_S - Health and Safety database table
Let me know if you are looking for any specific table/s as well.
Good luck!
Regards,
Rama

Crystal Reports - Tables Missing from the List Within SAP Data Dictionary

We have installed the Integration Kit and would like to create reports in Crystal Reports 2008 based on some transparent tables (BKPF being one) in our ECC 6.0 box. Using the standard Data Source 'SAP Table, Custer, or Function' we are able to connect to our ECC system and generate a list of tables within the data dictionary. However, we are missing quite a few tables such as BKPF and VBAK (tables we can see include EBKN and EBKZ).
We ran a trace on the system (ST01) but have not found any authorization failures for the assigned account (nor do any errors or issues show up in any of the work process trace logs).
Has anyone experience anything similar? Helpful pointers to helpful info is much appreciated (we do have all the install and user docs).
Thanks!
Joe Haynes
Edited by: Joe Haynes on Apr 14, 2009 11:41 AM

Hi Joe,
try the following:
- right click on the connection entry
- select the item options
- there is on the right hand a box that allows you to enter filter values. example SFL% will show all tables starting with SFL
- enter a filter and hit OK
- right click again
- select refresh.
most likely it is just the amount of tables coming back
Ingo

Finding changes in SAP tables

Hi,
I have problem with SAP - Cognos interface. It functions like an ABAP program that generates a file from spec. fields of some SAP tables like BKPF, BSEG, BSID, BSIK, etc. And this is all OK, but problem is that report always selects ALL data, and in FI case(those table that I mentioned) this is complicated. For example one item is in some period open item, and in few days it will go to closed items. As COGNOS interface runs once in a Month or something like that, it is problem how to select proper data, because of huge amount FI data.
Any Idea how to select only changes at table level? This must be also applicable to MM, SD and CO data. I thought of CHANGE DOCUMENTS, but what if change is not traced in CDHDR table because some data element is used in SAP table is not check to be observed as Change Document?

Mario,
For the changes, when ever there is a change done in the system a change number is created which will be available in table CDHDR, based on the Object classes extract the data and the required dates of changes made pull out the data.
In case for AP, AR, G/L you can check with some tables ( there are some tables which will be only be updated based in the process AP/AR/GL ). Based on the list of these tables, extract data from table CDPOS using the Change Number obtained from CDHDR.
Anmol Saxena.

Relationship between unknown SAP-TABLES

Hi Folks,
Lets take a scenario of populating an ouput internal table with fields from 4 unknown sap tables(relation between the tables is unknown). How can we check the relationship between those tables to populate the internal table..? What are the possible ways to check the relationship between tables..?
Can u please help me on this.
Thanks n regards,
ram.

Hi Ram,
 I tried the following method to find relation between tables and i think it is quite useful. I hope this will be of some use to you.
-> Goto SE11 and display one of the tables.
-> Click on the Graphic icon on the toolbar or use shortcut ctrlshiftF11
-> It displays all the related tables by foreign key and even gives you all check tables involved. If the list is a long one, you can even use Find option to check if the other tables you are trying to find relation with, exist in the screen.
 Hope this Helps!! Do get back!!
Regards,
Naveenan.

How to send mail to distribution list and another table list

Hi
I am facing a problem. I need to send mail to the user who is creating the SO/PO and a distribution list.
Problem is only one thing can be used at the same time. ie either Distribution list or list from internal table.
How can we use both in 1 function module. Like it should call the internal table and then the distribution list for sending the mail .
Regards,
Varun

Hi,
Refer to following link,
http://www.sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://www.sap-img.com/fu016.htm
Reward pts. if helpfull.
Regards,
Dhan

Issues in exporting data from SAP tables in SE16 to excel

1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.

1. I don't know. How about creating a pivot after exporting data
2. System->List->Save->local file->clipboard
Then paste whole lot in Excel
3. This is a problem with Excel, not SAP. SAP exports with leading zeroes.
You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format.

Creating a new Search Help on a standard SAP table field?

Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!

Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max

How to find list of internal tables while debugging

Hi Experts,
I am debugging a block of an ABAP program( User Exit ). Is there any facility to see what are the internal tables, work areas are available for that particular block? Can I see it new debugger? Because I don't know from which internal table I can take a particular value, which I need to populate in an user exit.
Thanks and regards,
Venkat.

hi,
you can find the exact answer here :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-6
under heading List of internal tables while debugging
regards
rahul

Using Standard SAP Tables in SAP Tables, clusters or functions connections

Hi Gurus,
I am trying to use Standard SAP table like MARA, MAKT.. etc. in my crystal designer. When i make a new connection using SAP tables, Cluster or Functions, these tables are not listed.
Any configuration i have to maintain to list those standard table.?
With Regards,
Balachander.S

Due to performance reasons there is a limitation regarding the number of the dispplayed table names. Once you are in the connection/table browser select a table and invoke the context menu by pressing the right mouse button. Select Options and in the options panel you can use wildcards in order to limit the results to the desired range (eg. use MA% to get a list of tables starting with MA). After you close the options panel press F5 and expand the connection entry again.
Regards,
Stratos

To upload a data into SAP Table with the help of RFC function in BODS

Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
Abhishek

Hi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan.

Which SAP tables does CM read to update data

Hi
Please can someone tell me which SAP tables in FI, MM and SD that SAP Cash Management (CM) selctes data from when updating FSCM-CM.
In other words, if I delete CM data and then recreate it using programs RFFDDL00 (delete) and RFFDKU00 / RFFUEB00 / RFFDMM10 / RDDSD10 / RFFDMM20 (create for OIs, GLs/Bank Bal, MM/POs, SD/SOs and MM/PRs resp) which tables are the source tables for SAP CM?
Thanks for any help anyone can give me. I'm trying to undesrstand the data creation process to trace why the drill-down to AP/AR OIs is not working and why the GL drill-down lists 000's more OIs than the CM balance shows and why the drill-down for POs/PRs in MM and SOs in SD works correctly.
Wayne

Hi Priyanka,
Please take a look at these..
http://help.sap.com/saphelp_erp2005/helpdata/en/04/964e38533e3860e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5a/5b5738ed5a1d36e10000009b38f889/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers

Report on direct SAP table updates?

Is there a SAP (audit) report that will list customer developments that update SAP tables directly? (a listing of Z* programs that INSERT, DELETE, MODIFY, UPDATE SAP tables). Thank you, Adrian

Hello Adrian,
the 50 object restriction should not apply if you define an object set and do not use the on the fly search but save a pattern. I have run the code inspector for 1000 and more objects w/o problems.
Kind Regards
Roman

List of sap tables

Similar Messages

Maybe you are looking for