List of the available parameters for the various URL options

Hi all,
Where can I find a list of all of the available parameters for URL options such as OMRET0=XXXXX (OMRET0=ActivitiesList or OMRET0=Homepage). I’ve created a copy task weblink and want the destination after the copy is saved to be the newly created Task Details page. I'd also like more information about the other parameter options.
Thanks!

Ok, I have found the solution:
Juste use "DefTaskNew" parameter after .../user/
Regards,
Laurent

Similar Messages

WHILE CREATING PURCHASE REQUISITION,THE AVAILABILITY CHECK FOR THE MATERIAL

dear Friends,
our users want to WHILE CREATING PURCHASE REQUISITION,THE AVAILABILITY CHECK FOR THE MATERIAL SHOULD BE ENABLE,
at present we maintaing KP in Material Master. if we activated what will happen?
please advice.
with regards,
Rajesh G

Hi,
The availability check is generally used for goods movements(GR,GI,reservation) & not for PRs.
Regards,
Vijay

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

What are the parameters for the processes menu items

Is there anywhere that lists out what the exact parameters of the process menu items are. i.e "Make Louder, Normalize, Hard Limit, Equalize Volume Levels",
For instance when you use "Make Louder" you see the dialog box title change from "Analyzing peeks" to "Applying Hard Limit". What exactly is happening when these processes are being applied? I realize that the Hard limiter is being applied, but with what paramaters and what does "Analyzing peeks" really mean and is there a way to do that by its self and if so what can be learned by the results.
I would also like to know the paramaters for the others as well. It would be helpfull to know, so one could dial up or down the paramaters to achieve a similar result, but with slightly more or less effect.
Regards,
Don T

Nothin?

What are the input parameters for Function Module

Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.

Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan.

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

Outlook - The path specified for the file SharePoint Lists PST is not valid

Some users are connecting via Citrix XenApp to Microsoft Server 2008 R2 and using Microsoft Office 2010 (14.0.7109.5000) SP2 MSO (14.0.7116.5000) - Microsoft Office Profressional Plus 2010 x86 version for their email. Microsoft Exchange Server 2010
SP2 for email.
They are connected to Microsoft SharePoint 2010 SP2 August 2013 CU, via a SharePoint Calender; they have View permissions to the SharePoint calendar using Classic Mode permissions (Not Claims). No permissions have / are changing on this SharePoint
Calendar. They connect to the SharePoint Calender to Outlook.
When they open up their Office Outlook client, they receive an error "Outlook Data File" "The path specified for the file \AppData\Local\Microsoft\Outlook\SharePoint Lists.pst is not valid." OK
They select OK and they get a window popping up with the option to try to find the SharePoint list. "Create/Open Outlook Data File" (File name: 'SharePoint Lists') Open Cancel. They select Cancel.
They are returned to their Outlook client "email."
As an I.T. administrator and SharePoint Administrator, I had a remote session with them, using Bomgar software and I Go to File Menu, Account Settings, SharePoint Lists Tab but there is no list there so go to the Data Files tab and see SharePoint Lists listed.
Selecting it once, and clicking on Settings... button gives error message similar to the one above about PST not valid.
STRANGE in that, when you do that! You can go to Home tab, Calendar (Ctrl+2), and see Other Calendars and now the SharePoint calendar that was supposed to be there before, but was just "empty!" There was only the Other Calendars
option but it didn't have any "sub" calendar item.
A similar issue is when Other Calendars is listed, and has a sub calendar listed, a SharePoint connected calendar. You click on it and get "Microsoft Outlook" "The set of folders cannot be opened. The path specified for the file c:\Users\USERNAMEHERE\AppData\Local\Microsoft\Outlook\SharePoint
Lists.pst is not valid." OK
Click OK and go through the above steps to get the same result. After going into Account Settings, Data Files, checking on the Settings... button, and receiving the error message, again mentioned above, and the prompt to Create/Open Outlook Data File,
thgen I can go back into Account Settings, Data Files, and double click on the SharePoint Lists and instead of an error, the Outlook Data File comes up, with Change Password... Compact Now, Comment, Name, Filename, Format (Outlook Data File) OK Cancel.
Can go back to the Calendar (Ctrl+2) and Other Calendars, and the SharePoint Calendar "Sub calendar" will appear and operate as normal! All was done was go into the Account settings and "check" on the "error."
Tried to delete the SharePoint Lists and close out and add it and then go back in, and it "worked" for a few days. I later turned on Logging and for over 24 hours it was on for the user. The user was not on forever.
In the Outlook Logging folder, from the users profile, I found many *.log files, firstrun, OPMLog, ETL files, one of which is 6MB, and some prof_001_outlook....txt files. I clickedo n the SharePoint Lists.pst.log file 1KB
It is listed here:
Store File Name: SharePoint Lists.pst
Date|Time|Action|Search Owner|NID|Change Action|Change Semantics|URL|Count Of DocIDs|Next NID Index to add to All Msg folder|Next NID Index to push to FTE|Folder Path|Folder Path ID|HRESULT|Result Status
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=FALSE)||||0x80040818|FAIL
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=TRUE)|||||OK
2014/05/23|08:10:22:673|Marking store for re-push: Newly created store|0|||||||||||OK
2014/05/23|08:10:22:673|SGO_ScMarkPushEverythingDone|0|||||||||||OK
firstrun.log
*** Starting First Run (05-23-2014 07:32:08) ***
...HrPreSplashFirstRun called.
...HrPreLogFirstRun called.
...HrPostLogFirstRun called.
...deleting WAB4/UseOutlook because we're using MAPI.
...writing UUID to HKCU.
...setting Primary Client to Outlook.
*** Ending First Run (05-23-2014 07:32:26) ***
OPMLog.log
2014.05.23 07:32:28 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 Resource manager terminated
2014.05.23 07:34:06 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:35:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:35:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:35:12 EXECUTING Put MAPI TASK
2014.05.23 07:35:13 Starting the Spooling Cycle
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:35:13 Sending one message
2014.05.23 07:35:13 Progress: Sending message 'RE: Good Morning!' (size 14.76 KBytes)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:35:13 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:35:13 FINISHED MAPI TASK
2014.05.23 07:35:13 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:35:13 [email protected]: Synch operation completed
2014.05.23 07:35:13 Sending done, Error code = 0x00000000
2014.05.23 07:35:13 Sending done, Error code = 0x8004010f
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:35:13 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:37:53 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:37:53 EXECUTING Put MAPI TASK
2014.05.23 07:37:53 Starting the Spooling Cycle
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:37:53 Sending one message
2014.05.23 07:37:53 Progress: Sending message 'RE: Good Morning!' (size 14.03 KBytes)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:37:53 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:37:53 FINISHED MAPI TASK
2014.05.23 07:37:53 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation completed
2014.05.23 07:37:53 Sending done, Error code = 0x00000000
2014.05.23 07:37:53 Sending done, Error code = 0x8004010f
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:37:53 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:57:34 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:57:34 EXECUTING Put MAPI TASK
2014.05.23 07:57:34 Starting the Spooling Cycle
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:57:34 Sending one message
2014.05.23 07:57:34 Progress: Sending message 'TP - Hold PE Call ' (size 6.00 KBytes)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:57:34 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:57:34 FINISHED MAPI TASK
2014.05.23 07:57:34 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation completed
2014.05.23 07:57:34 Sending done, Error code = 0x00000000
2014.05.23 07:57:34 Sending done, Error code = 0x8004010f
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:57:34 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:58:58 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:58:58 EXECUTING Put MAPI TASK
2014.05.23 07:58:58 Starting the Spooling Cycle
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:58:58 Sending one message
2014.05.23 07:58:58 Progress: Sending message 'TP - Hold PE Call' (size 6.00 KBytes)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:58:58 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:58:58 FINISHED MAPI TASK
2014.05.23 07:58:58 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation completed
2014.05.23 07:58:58 Sending done, Error code = 0x00000000
2014.05.23 07:58:58 Sending done, Error code = 0x8004010f
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:58:58 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:12 EXECUTING Put MAPI TASK
2014.05.23 08:03:12 Starting the Spooling Cycle
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:12 Sending one message
2014.05.23 08:03:12 Progress: Sending message 'Accepted: TP - Hold PE Call' (size 5.70 KBytes)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:12 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:12 FINISHED MAPI TASK
2014.05.23 08:03:12 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation completed
2014.05.23 08:03:12 Sending done, Error code = 0x00000000
2014.05.23 08:03:12 Sending done, Error code = 0x8004010f
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:12 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:16 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:16 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:16 EXECUTING Put MAPI TASK
2014.05.23 08:03:17 Starting the Spooling Cycle
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:17 Sending one message
2014.05.23 08:03:17 Progress: Sending message 'Accepted: TP - Hold PE Call ' (size 5.70 KBytes)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:17 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:17 FINISHED MAPI TASK
2014.05.23 08:03:17 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:17 [email protected]: Synch operation completed
2014.05.23 08:03:17 Sending done, Error code = 0x00000000
2014.05.23 08:03:17 Sending done, Error code = 0x8004010f
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:17 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 636
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 706
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 636
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
2014.05.23 08:04:09 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 706
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
They are using a CRM client 2011 (Server is CRM 2011 - on premise) as well as having other connected email accounts - managed accounts, like Accounting or HR, etc.
What can I look for / provide for you all to assist? I am almost ready to open a ticket with Microsoft to resolve this as it has been happening for multiple users for multiple weeks.
When "I" go in, logged on as myself, I do NOT have this problem, however my account is not "old" in that I just logged onto the account domain\matthew.carter, where these users use their accounts day in and day out for weeks / months
/ (some years).
Thank you!

Did you post this in the SharePoint Section? Did you find a resolution for this?
We are experiencing the same issue and have yet to find anything to resolve this issue.
Regards, Daniel
I ended up scouring his old posts looking for the other thread, and he did open one in the SharePoint forum:
https://social.technet.microsoft.com/Forums/office/en-US/3dded85b-73ee-47dc-9609-6ee65f329983/outlook-the-path-specified-for-the-file-sharepoint-lists-pst-is-not-valid?forum=sharepointadminprevious#3dded85b-73ee-47dc-9609-6ee65f329983
Unfortunately, what was marked as an "answer" by the moderators isn't really an answer at all to the problem. We are experiencing pretty much an identical issue with a calendar people are adding to Outlook 2010 from SharePoint 2010 within a XenApp
server (using roaming profiles). However, we have not had the issue occur outside of XenApp yet.

What are the default parameters for PER_EVENTS api

Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

What's the available value for weblogic.jsp.encoding in web application.

Hi,
          I'm using chinese windows nt 4.0 and weblogic 5.1 sp6.When I did not set
          weblogic.jsp.encoding to GB2312 , when the jsp file contain's chinese , the
          output will be error .And when I did not set it , the output is correct, but
          when I use request.getParameter("SomeFormElement")(the element inputed
          chinese), the return value is error.
          How should I set weblogic.jsp.encoding value to satisfy all this problem?
          When I set the value to ISO-8859, there is an exception:
          java.io.UnsupportedEncodingException: Charset: 'ISO-8859' not recognized,
          and there is no alias for it in the weblogic.httpd.charsets property. So
          What's the available value for weblogic.jsp.encoding in web application?
          Pan


hi ,
i think the best way is to create java beans ,in that bean call your EJB ,
and check the validation over there.
and make that bean scope to session.
in each and everypage try to check the session ,if it is not valid then forward to your login page...
otherwise continue to give access to him like guest
Regards,
AfTaB

Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

falkner09 wrote:
is there really no fix for this?
It would depend on your definition of "Fix"
Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
To turn Zoom on or off got to:
Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
_To Zoom in or out_:
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
_Move around the screen_:
When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
_Large Text_:
Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
I hope this has helped a little - other than this option I think it pretty much is what it is.
BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
Best wishes..
Ricky

How to adjust mouse or trackpad parameters for the user selection screen?

This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone Carrion

For the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.

Bapi or Function Module to do the availability check for Planned Orders

Hi all,
I need a Bapi or a Function Module to do the availability check for a Planned Orders. Anyone knows how?
I will use it in an Exit.
Thanks in advance
Points will be given

I think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI

One MIDI input, one set of modulation parameters for the EXS24

This might be somewhat of a neophyte question, but here goes:
I'm interested in being able to set a specific set of modulation parameters for each note in series of notes inputted into the EXS24. I'd like to be able to bypass any sort of complex routing techniques with the modulation matrix or automating the parameters in the arrangement window. For instance if I input 2 C1 notes, one right after the other, of the same length, I'd to be able to set the velocity, filter values, ASDR values, etc. of the first completely independently from the second. The main reason I ask this is that for instruments such as a guitar (which has multiple strings), one note might be able to be played at high velocity, high release, low attack, for instance, while another one might be played exactly after that (on a separate string maybe) with low velocity, high release, high attack, etc., etc. In order to achieve this more realistic sound, would I have to work with multiple instances of the EXS24 (and then maybe just group them all together?), or is this sort of micro-manipulation of all the modulation parameters for each individual midi note input somehow possible with just one instance of EXS24?
Hope this makes sense!

Do you have a controller with polyphonic after touch? you can already have different velocities for note attacks and filters with a standard velocity sensing keyboard. If your board sends release velocity you can also have a different release for each note. With poly after touch you can have different vibrato depth for each note. If you want differing mod speeds for different notes I'd have to give it more thought...

List of the available parameters for the various URL options

Similar Messages

Maybe you are looking for