List User and Bus Area

I need to produce some reports on the USERS and the BUSINESS AREAS that they have access to. Does anyone have help finding these queries.
Thanks,
Brad

Hi Brad,
There is no indication in your post of whether you are in an Oracle Apps or non-Oracle Apps implementation of Discoverer. Assuming you are in an Oracle Apps implementation, I suspect you are interested in both users whom have been shared the business area directly and users whom have been shared because they have been granted a responsibility. Here is a query for an Oracle Apps environment where you obtain a list of users whom have been shared the b.a. directly:
select distinct
(select fu.user_name
from apps.fnd_user fu
where fu.user_id = usrs.usr_id
) shared_with_user_name,
ba.ba_name
from
(select eu.eu_id,
to_number(regexp_substr(eu.eu_username,'[[:digit:]]+',1,1)) usr_id
from eul_us.eul5_eul_users eu
) usrs ,
eul_us.eul5_access_privs privs ,
eul_us.eul5_bas ba
where privs.ap_type ='GBA'
and privs.ap_eu_id ; =usrs.eu_id
and privs.gba_ba_id =ba.ba_id
order by upper(ba.ba_name);
Of course, with this query you will need to replace "eul_us" with your eul owner name and this query assumes you are in eul5. You can obtain this same information from the "Discoverer V5 EUL" business area. The steps to set this up are here (assuming you are Disco 10 http://download.oracle.com/docs/cd/B25016_08/doc/dl/bi/B13916_04/eul_status.htm).
Patrick
Edited by: Patrick Bacon on Nov 17, 2009 6:06 AM

Similar Messages

  • List users and their attributes

    Hello,
    We are on SRM 5.0 and I am looking for a report which lists users and their attributes. So for instance  username / position and all catalogs assigned to them.
    Thanks for your help!

    Hi Antoinette,
    There are no standard reports for this requirement. I have already posted a code sample for this requirement.
    https://wiki.sdn.sap.com/wiki/display/SRM/CodeSample2-Reporttodisplayuserattributes
    Hope this solves your problem.
    Regards
    Kathirvel

  • HT4314 I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

    I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

    By "game center account", do you mean Apple ID?
    If so, you can change it.
    1. Tap settings and navigate to iTunes and App Stores
    2. Tap "Apple ID" and then tap "Sign Out"
    3. Log in with a different ID.

  • Where and how users and password are stored?

    1) I'd like to know where and how users and passwords are stored in portal30_sso schema.
    Does anybody know something about?
    2) Why have I to start httpd with ssl enabled as root user? Isn't it insecure?

    This only applies to Unix
    Mike
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sebastiaan van Dijk:
    Hi,
    When the portnumber is under 1024, you have to start it as root, but you can run it as another user.
    So, your SSL webserver instance can run under another user than root. Root only has to start it up.
    HTH, Sebastiaan<HR></BLOCKQUOTE>
    null

  • Email Settings Authentication Failed - User and Pass are correct

    Starting late last week I noticed I wasn't getting any tickets, even when I was submitting them. Today I checked my email settings and although they hadn't been changed an unknown error occurred. Figuring a bad address I changed the email server address from server.domain.org to the URL we use to connect phones and access our web mail system. After hitting submit I get a message saying it's an invalid username or password. I've double checked the username and password and I am able to login to our Exchange server (from my computer and the Spiceworks server) using it. I've tried various combinations of the username [domain]\username, [email protected], and [email protected] All fail authentication. I also, for laughs, changed the password on the account. Still fails.Is there something I'm missing? I am using the latest...
    This topic first appeared in the Spiceworks Community

    I'm sorry to learn you are having trouble adding your corporate account, jwh8123. We definitely want to make sure that the information you are using is correct. What is the domain of your email address? For privacy reasons please do not provide your entire email address on this public forum.
    Thanks,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • I have the problem described in /forums/knowledge-base-articles/704725. (Firefox is already running but not responding). My only solution is to use Task Manager to end the firerfox process. I am the only user and there are no other profiles on my system

    Occasionally I have the problem discussed in /forums/knowledge-base-articles/704725 , Firefox is already running. My only fix is to use Task Manager to end the firefox process. At such tmes, I have no other instances running.

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • Subject area security validating users and groups from external table

    Hi all.
    I don't have practice to put question here, but there is one problem, that seems don't work correctly in OBIEE.
    I'm trying to put users in groups within external table and this works fine.
    I put security on the subject area level like this:
    SA1 -> GroupA allow, Everyone not allow
    SA2 -> GroupB allow, Everyone not allow
    External table:
    User----------Group
    A---------GroupA;GroupB
    B---------GroupB
    Users A, B and GroupA, GroupB exists in the RPD, but I didn't put users inside them, I want this from table.
    From the init block, external table I'm taking users and join them in the group. Same name users and groups are also in the presentation service.
    When i connect with user A i don't see any subject area, when go to My Account i see in Group Membership/GroupA and GroupB, so it's readed from the external table.
    Why in this case the subject area permission is not working?
    It works if I explicitly put users in groups, in the RPD.
    I have read this blog entry http://kpipartners.blogspot.com/2009/07/groups-webgroups-and-delivers.html and it is said that this works, but I'm interested how.
    What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?
    This doesn't work or something is missing:
    Re: Security on Subject Areas
    Regards
    Goran
    http://108obiee.blogspot.com

    What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?Yes, you should remove Everyone and add the relevant groups to each Subject Area. You don't need to set privileges in the RPD, in fact that's probably why it doesn't work for you. Leave your RPD Presentation Catalog as "Everyone" = Read as you will controlling access from the Presentation Services and it should work.

  • SAP Sizing for additional users and functionality

    Our company is currently doing an SAP HCM rollout project to the other departments. The current exercise is of determining hardware requirements should these be necessary. Currently the configuration is as follows there is a Central Instance with 8 processors x 1.8Ghz and 24GB of RAM, and there are two dialogue instances with also the same specs. The solution has FI/CO, MM and HCM modules and currently the total 3824 users and they are growing at an average of 30 users every month. The HCM rollout is likely to bring on board a further 5000 users onto the system.
    The second scenario is on the portal server were they are deploying ESS and MSS with a JCO to the R/3 production as the backend system, currently there are 1800 users and we are looking at adding about 6000 additional users.
    Currently the portal box has 8 processors x 1.8Ghz and 24 GB RAM.
    All the servers mentioned above are Proliant BL480c G1.
    What would be the ideal hardware specs to host the users and the solution.

    Have you tried the quicksizer tool at SAP Marketplace?...
    http://service.sap.com/quicksizer
    Regards
    Juan

  • EAP-TLS User and machine authentication question

    Hello,
    i have a question regarding EAP TLS authentication in a wireless environment. We use Cisco AnyConnect NAM client and an ACS 5.1 to do EAP-TLS authentification. The Laptop and the user can be successfully authenticated using a certificate from our internal CA. i can also check the in our corporate AD if the user and machine are member of a certain group and based on the membership a can grant access to the network.
    i can see in the ACS when the laptops after a reboot logs on to the network, but i don't see a log when the laptop comes back from hibernate mode, i guess this is normal because the laptop sends only the autentication equest after rebooting.
    What i'd like to achive is, when a user logs on the it should always be checked if the machine was authenticated prior the user can get access to the network. Is there a way to do this with EAP-TLS and a LDAP connection to Active Directory.
    thanks in advanced
    alex

    Sounds like you rather want to use PEAP/MSChapV2

  • Finding out the source user and tablespace in a database export

    Hi folks,
    Lets say a customer gave us a export of their DB using expdp or exp, whats the best way to find out what users and tablespaces are in that export? With exp Ive used imp and created a index file but it seems a datapump export doesnt give up this information so easily. Short of going back to a customer and asking, whats the best technique?
    -Mark

    No this doesnt really give enough info. It give a hint toward the tablespace but not the user:
    $ grep "ORCH" test.sql
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'ORCHTST.VODACOM.CORP', inst_scn=>'53131043');
    In the above example I know the user and tablespace will contain the charaters "ORCH" in part and this only shows the one entry.

  • Is it possible to store user and role information in MDS instead of jazn ?

    Hi
    I want to store the user and role details in mds rather than jazn xml. Is it posssible? Could any one tell the steps that to be follow?
    Thanks,
    Vishnu

    Hi,
    MDS is not a polic store nor an identity management system. It does not really make sense what you are asking for. Instead of jazn-data.xml you can use OID and RDBMS for holiding user identities and policies. If it is only user identities and groups you want to move to another store then you have OID, RDBMS, Active Directory. OAM etc.. The jazn-data.xml file btw. is used at design time only. Upon deployment - by default - users and groups are created from jazn-data.xml into the integrated WLS LDAP server. Policies in jazn-data.xml file are copied to system-jazn-data.xml of the target WLS server.
    Frank

  • How to get Portal Login User and Its Related BP in CRM?

    Hi,
    An ABAP Webdynpro program is called in CRM from Portal user by a portal link. How to get the user ID and its related BP in CRM? Thanks!
    The portal is integrated with ECC, and all users and BPs are maintained in ECC then replicated to CRM.
    Best regards,
    Hao

    Hi,
    Try the below code
    IUserFactory userfact=UMFactory.getUserFactory();
    IUser user=userfact.getUserByUniqueName(request.getUser().getUserId());
    String usrid=user.getUniqueName();
    And also you can get the groups assigned to user by using the below code
    Iterator groups = user.getParentGroups(true);
    while (groups.hasNext()) {
         String groupstr = (String) groups.next();
         IGroup g = UMFactory.getGroupFactory().getGroup(groupstr);
         response.write("Group name "g.getUniqueName()"<br>");
    Regards
    Suresh

  • Why does my Ipad keep said that the user and passwork is incorrect and won't let me verify my account?

    Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it?  I've tried to change my password but it still won't let me verify it!

    Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it?  I've tried to change my password but it still won't let me verify it!

  • SQL Developer Standard user and SID

    Good Morning!
    I installed the sql developer, but I don't know how connect, what the standard user and SID?
    Thanks
    Fernando

    The default user and SID are SYS and ORCL, but I doubt you have a database.
    http://www.thatjeffsmith.com/archive/2012/12/i-have-oracle-sql-developer-installed-now-what/

  • Query to extract users and the applications they have accessed?

    I have been requested to list users and the external applications they have accessed (if they have that is!)
    I produced a list to show they had logged on using the object orasso.wwsso_audit_log_table$
    and I extracted the the applications they had access to using the objects orasso.wwsso_application_info_t and orasso.WWSSO_APPUSERINFO_T
    But what I need to find is whether the users have access the applications listed in.
    I have looked at alot of objects but nothing seems to spring out at me.
    Please can anyone help?
    Thank you
    Sue

    Hi Manoj,
    It is not possible in SAPB1.
    Try to Export to Excel File.
    check the thread,
    Re: Authorisations List
    Regards,
    Madhan.

Maybe you are looking for

  • Shortcut issue on a non-English Keyboard

    This is just a small issue, but nevertheless annoying. I'm on a danish keyboard layout, where the ";" key is a actually assigned to a letter "Æ". Thus I cannot press "option+Æ" to show/hide guides. I can assign the function to a different shortcut, b

  • Why would my PDF Form print out the tab order on top of my form fields?

    When this user prints out the filled out PDF form we created, it prints the tab order as a little square numbered box right on top of the form field entry.  The tab order prints over all types of fields, text entry fields, check box fields, etc. I am

  • Airport transmission cycling on and off

    I have a new Airport extreme that I use with 2 MacBooks and an Apple TV in my house. The signal from the Airport seems to go into an on/off cycle. It happens on both my MacBooks. The signal indicator in the menu bar goes from grey to active every few

  • LION: How do I get LION Finder to remember a window's settings as always before?

    LION: How do I get LION Finder to remember a window's settings (view, window size, position, toolbar, sidebar) like always before? It remembers soon after, but after a time it forgets and does what it wants. Redoing this over and over is driving me c

  • Web Pages Blank on Tour

    Just got a new Tour yesterday for my wife after trying out a friends Curve. On the curve we were able to access web pages she needed for work. With the Tour we just get a blank grey screen. Any idea? VZW said that the Tour must not be able to view th