Listbox Row Alignment BUG

I stumbled upon a bug in the aligment setting of a Listbox row:
The code should justify the third line in the center.
What happens is that CellJustify, justifies all rows.
The help for 'CellJustify' states:
Gets or sets the justification of text within the active row of the listbox.
So this should only set the justification of the active row.
LabVIEW 8.6
Windows XP Dutch
Ton
Message Edited by TonP on 12-09-2008 04:18 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Solved!
Go to Solution.
Attachments:
ListboxAlignmentBug.png ‏4 KB

Dear Ton,
Thank you so much for your report. I made a small VI to reproduce this problem. I reported a Corrective Action Request CAR #137047. I will keep you posted,
Best regards,
Martijn S
Applications Engineer
NI Netherlands

Similar Messages

KF at result row aligned right-justified, at total line row aligned left-ju

KF at result row aligned right-justified, but at total line row it's aligned left-justified. We have checked query/KF property in query design, but can't find the clue to fix it. How to make these two aligned at the same direction in either left justified or right justified?
Any idea?
Thanks
Message was edited by:
Kevin Smith

Hi Kevin,
In the Bex Tool bar, there is a button for Layout, and under it there is Alignment option. You can try with that though I am not sure if it will solve your purpose.
Regards.

Tree control or multicolumn listbox vertical alignment

Hello, here is my problem: i use a tree and i need to resize it programmatically, so i change the height of all cells. When i resize it, there is no more vertical alignment between names(text) and tree's branchs.
This problem even occurs with multicolumn listbox: when i resize cells, the text is no more vertical centered....
Thanks a lot for any help
Attachments:
TreeVerticalAlignment.vi ‏15 KB

So, now it's 2011. It seems like this issue has not been addressed yet. Any good work arounds? I'm trying to have larger rows without extraordinarily large text. I am using multiple lines to get the desired effect; however, the item symbols are vertically aligned to the top, so they don't look good.
Thanks,
Chris

Automatic Row Processing BUG?

Unfortunately it turns out that one can not create report with form through the wizard if the target table has a primary key that should be updatable. Is that true?
I have a table with only 2 columns 1-code of some type, 2-description. Column 1 is primary key.
I get the following error when I try to change tha value of column 1:
ORA-20001: Error in DML: p_rowid=ass, p_alt_rowid=CURRENCYCODE, p_rowid2=, p_alt_rowid2=. ORA-01403: no data found
I searched through the forum but noone explained why this happens. And the only thing that I think is the reason for this is that Automatic Row Processing does not remember the previous value of the primary key column so its embedded SET statement only has the new value.
Is this a bug?
I don't want to create different processes to update, delete, create. This however involves using temp hidden field to hold the original value of my first column.
Would You fix this to be done automatically in HTMLDB when using the wizard with Automatic Row Processing?
My version is: 1.6.0.00.87
Thanks

Well, actually the wizard succeded but it did not do what I needed: my table is with one column (primary key) and another column (varchar). The wizard asked me for my primary key column and I pointed it, but after it secceeded and I ran the form, the field was hidden. But I wanted it to be avalable for entering/editing so I changed it to a text box type. Does that help?
And another thing what happens if I use the wizzard on a table with to columns which define a composite primary key. when i point them on the relevant page, the next page of the wizzard asks me to choose columns, but there aren't any more because it appears to hide my primary key fields. In this case i really can not use the usard for helping me with automatic processing. This and the previous case I believe are if not bugs then at least "lacks" of the wizzard.

Listbox row 0 and vertical scrollbar issue

Hi,
I tried to do simple VI where I can check items in the Listbox control. My problem is that when I click anywhere on the vertical scrollbar or buttons with the triangles, Mouse Down event triggers and check item in the row 0.
Is this an issue or is it just a mistake in code?
For some reason I am not able to attach VI, so block diagram is below.
Thank you for any help.
I use LV 2010.
Duri
Duri
Solved!
Go to Solution.

Here is a demo VI that handles listbox selection like this with a single click. Saved in 2011, uses OpenG array.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Listbox Item Selection Demo.zip ‏55 KB

Keynote for iOS Bullet Alignment Bug?

Does anyone know how to solve this issue:
Image bullets in Keynote for iOS have a bug related to vertical alignment of the image.
For the first line of text, the bullet image is correctly aligned in the vertical center of the line.
For all other lines, the bullet image is aligned towards the top of the line.
This is true regardless of whether I use the default image in iOS or import an OSX keynote document.

I kept trying things this weekend to fix this problem, and I FINALLY figured out what the common feature was, that was causing the misalignment of the bullets.
Line spacing.
If you apply line spacing BEFORE a paragraph, it misaligns the bullets... which is WHY it wasn't happening to the 1st bullet in each text box, but only those following....
In the final test I changed the line spacing attribute to AFTER a paragraph, and VOILA! no more misaligned bullets.
It's definitely a bug in the software, since either way it looks fine on the mac, and is only a problem on the iPad.

Table Row Alignment

Hi,
I have a problem with a row in a table that doesn't align
correctly, When i view the page in Design View, it is displayed
correctly, but when i preview the page the row seems to have
stretched.
Thanks in advance
Attached Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Fat Tom Dedicated Kite Surfing
Website</title>
<style type="text/css">

</style>
</head>
<body link="#000099" vlink="#FFFF66">
<table width="576" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<td height="257" colspan="2" rowspan="2"
bgcolor="#1C4680"><img src="Images/FatTom_Top_Right Main
New.jpg" alt="Fat Tom" width="469" height="302" /></td>
<td width="110" height="94"
bgcolor="#1C4680"> </td>
</tr>
<tr>
<td bgcolor="#D3E7E8"> </td>
</tr>
<tr>
<td width="6" height="406"> </td>
<td width="463"
bgcolor="#D3E7E8"> </td>
<td bgcolor="#D3E7E8"> </td>
</tr>
<tr>
<td bgcolor="#FFFFFF"> </td>
<td height="31" colspan="2" bgcolor="#1C4680"><div
align="center"><em>Pad | Shots | Chat | Contact |
</em></div></td>
</tr>
</table>
<p> </p>
</body>
</html>

After looking at my problem in more detail, I can see that my complex renderers do impart a non-trivial drag on performance. I am looking into improving them, but I may only get so far, and the tables can be large.
My typical table has ~3 row header columns, and dozens of data table columns. Tables containin 10,000 rows are not uncommon. Several columns may use a special 3rd-party chemical structure renderer which can take up to 75% of the overall rendering time when I scroll the table (I have looked at this under OptimizeIt). The rowHeader JTable will definitely contain one of these special renderers. Each column in the table has it's own TableCellRenderer instance.
My problem is that under vertical scrolling, the rowHeader JTable tends to lag the main data JTable until the scrolling stops, and then it will catch up and align correctly.
I can accept diminished vertical scrolling on the whole, because I am doing a lot of drawing into the table cells. I cannot accept this mis-alignment during vertical scrolling, however.
Based on what I am seeing, I am under the impression that Java renders each JComponent individually to the offscreen buffer, then before going on to render the next JComponent, it will BitBLT the rerendered JComponent to the screen. This can explain why I see this lag. Is this indeed true, though?
So, I need more info on understanding the intricacies of JTable rendering - I would be grateful for any assistance in this matter...
thanks,
jpl

Ps Actions work for all but one person in office. Same Software... Alignment bug/settings?

I have created two photoshop actions that convert a PDF into jpg pages, and then slices those pages into pre-sized pieces, and saves the pieces out individually. Two versions, for two differently sized PDFs.
We use this in the office for creating a "book" visual from a tricky indesign file.
Both actions work fine for me.
Both actions work fine for coworker#1.
However, when Coworker #2 uses either of these actions, the chopped up pieces to not align properly in photoshop, and instead leave blank sections where they should have been merged together. (align box A top. Align box A to Shape_gutter. the second step never happens.
This 'error' occurs on both PDF Styles' actions for cowroker#2, so I'm assuming it has to be a setting? We are all running the same version of photoshop (Up to Date CC 2014), and testing on the same files.
anyone have any insight?

Everything is not exactly the same you state one is different. There is something different in the mix. A broken file a bug in the install in the system there is a difference some place. You see different results... Perhaps a different level of code are plug-ins involved other actions etc.
Post the action let us look at it/them.

Apex Row Filter Bug

Hi,
I am having an issue with the Apex Row Filters.
I have a report with say 300 columns. When going to Actions -> Filter, then selecting Row, and browsing the left column, there are columns that do not work in the Filter Expression box b/c the aliases are wrong.
There was a bug that was fixed in Apex 4.1 that after so many rows, all the rest of the columns would have '//.' for their aliases.
It seems for all the combinations of 2 letters down to JZ are fine. After JZ, the combinations stop working. (You would think the next one would be LA, LB, etc)
The combinations after JZ start like: 'L'', 'L(', 'L)', 'L+', etc.
These columns cannot be used in the row filter expression box. When trying to use one, I get the following error message:
Invalid filter expression. ORA-20001: get_dbms_sql_cursor error ORA-00920: invalid relational operator
Just wanted to make a note of this bug, and was wondering if this issue is fixed in Apex 4.2, if not, hopefully this will be fixed in a future patch soon.
Thanks,
Gage
I am running Apex 4.1.1.00.23

Hi,
You can test on apex.oracle.com how it works on APEX 4.2
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Title/Heading/Row-Align Multi-Column Tables

File under: Frame Annoyances, with a limited hacky work-around
In the two-column format we commonly work in, we often need a table that is column-wide, but may flow into multiple colums.
The problem is that the continuation heading (and TableTitle, if used), never align with the starting heading/title. This is because the continuations start at top of column, whereas the table itself starts (by "Anywhere" default) below the anchor line (presumed to be "In Column" for this discussion)..
OK, what if we change Table > Table Designer [Basic] Start to:
Top of Column: Oops, that becomes top of next column, leaving the anchor text column-widowed (but it gave me an idea).
Top of Page: Oops, that becomes top of next page, leaving the anchor text page-widowed.
Float: No effect
OK, what if we change the anchor text Format > Paragraph > Para Designer [Pagination] Format to:
[Pagination] Across All Columns (AAC): Oops, table appears only in left column on all pages, or;
[Basic] Space & Line Spacing, including negative values, appears to have no effect. Using a tiny font only minimizes the problem, and doesn't cure it.
I thought I had figured out how to solve this at one time, but could not recall it. I'm posting this in part to solicit some simpler solution. Web searching found only one solid candidate solution, and it was, of course, 404. Perhaps Frame versions later than the FM7/Win and FM7.1/Unix that I routinely use have enhancements to address this.
We normally just sidestep the problem by using an AAC format and a table that spans the page, with a fake center gutter, simulating a multi-column flow. But in a recent case, I wanted a real single-column-wide table of variable length (due to conditional rows and expected future growth), but I wanted the headings to align across columns. The table did fit on a single page, which is a limitation of the following hack.
Hack: This example presumes a normal 2-column page text frame that is 7.5in wide with a 0.24in gutter (3.63in columns), and table that needs no more than one page. It works for 3- and 4-column layouts as well.
Use an AAC anchored frame text line.
Create a full page width (7.5in) anchored frame (which can be Below, Top of Col, as desired).
Create a text frame inside the anchored frame. This frame is:
one more than your standard page (3-column for this example)
Same gutter size (0.24in for this example).
Initially draw the text frame to fit inside the the anchored frame, so you can easily grab it.
Make sure the default (anchored table) paragraph format of the first column is "In Column".
Use Graphics > Object Properties to adjust the inside text frame:
Set Width: to your standard text frame total width plus 1 column and 1 gutter (11.37in for this example).
Set Offsets: to 0 and 0 (this will push the rightmost column out of sight for the moment).
Insert your table at the anchored table text of the inside text frame.
In Table Designer, set Start: to Top of Column (this pushes the start of table to column 2).
Select the internal text frame again.
Set Offset From: Left: to negative one column + one gutter (-3.87in for this example).
The table now appears to start in page column one, and flows to additional columns with heading alignment.
This worked perfectly for my recent requirement. In fact, I used a 3-column layout (4 actual) for the text frame inside the anchored frame. Some math is required, sorry .

I'm not sure if I followed that correctly, but if I read it right, you
have a single-column table that spans multiple columns, and the issue is
that the first column does not butt up against the top of the text
frame, while the additional columns do. You want the table in all
columns to butt up against the top of the text frame so that they are even.
If that is the case, the solution is this:
1. Create a paragraph format called "TableAnchor" in the Paragraph
Designer. Assign it with a negative Space Below of -12.0 pt, "Fixed"
line spacing, "Start Anywhere.," "In Column." Assign the font size as
12.0 pt.
2. Create your table format. Give it a Space Above of 12.0 pt.
3. Then, always insert your table into its own, empty TableAnchor
paragraph. You will get the alignment you seek.
NOTES: Anywhere I said "12.0 pt," you can use a different font size-- as
long as you use the same number in each place. You may also want to
create a TableAnchorAAC paragraph format, which is identical except for
the Across All Columns setting, to hold tables that span multiple columns.
I hope I understood the question correctly and was of help.

Audition speech alignment bug, confirmation request before submitting a report

I am looking for someone to confirm a bug for me before I submit a bug report.
In Audition CS6 when trying to use automatic speech alignment it does not seem possible to produce a result unless checking a "add aligned clip to a new track" option. In other words audition will not modify a track that I want to be changed even after running through the alignment procedure. If I choose "Add aligned clip..." it will make a new track and it will be aligne
d. If this is by design why to have a new track option? If this is by design how do I do successful roundtrip with PPRO?

If you do not choose to add the aligned clip to a new track, Audition will simply add the new file to the Files Panel. When the process completes, look at the Files Panel to find the newly created asset.
From here you can then save the new file to the format of your choice and then import that into Premiere.
If you do choose to add the file to a new track, you can then choose Multitrack > Export to Premiere Pro to continue the roundtrip process.
--Ron

Alignment bug in Windows Internet Explorer

Im trying to get a silly blog off the ground; I get it to display fine in Safari; Mac/Windows Firefox......but there is usually a major format bug in Windows Internet Explorer. The column on the left wants to keep shifting to the center. Can't find the cause. Any solution? Thanks;-)
(or let me know if I managed to fix it)
http://www.helpwithfrench.com/nitwit/Myblog/Blog/Blog.html
thanks again;-)

I do use iweb enhancer and massreplacit for additional code in the head and elsewhere, hmm , I'll check into that possibility.
Of course it comes out fine on every other browser. Meantime; in iweb, the left column is placed exactly on the left edge. So Im stumped. Should I shift left, right, toward the center?? I could shift both columns to the right; so the left is in the center, and the right is on the far side; but then they might still tend to bleed over one another...hmm
thanx
I'll be checking the massreplacit 'post processing' as you say;-)

Lenovo Vibe Z2 Pro K920 ROW Lollipop bugs

When the phone is turned off and i plug the charger for the first couple of minutes it shows the green battery and the charging animation but the screen stays on and, the animation stop the charge percentage does not change but the phone keeps charging.
The touchscreen is much more responsive than Kitkat and i think is too sensitive.

Other problems noted - random restarts, forced closing of some programs, including stock apps (play store, contacts, messaging ...). I use a single SIM but sometimes, the phone search a signal for a second SIM but as I said already, I don't have inserted another SIM in the phone and seems to be possessed ... ) I made a factory data reset but did not help ... these bugs were not present in KitKat, only in Lollipop.

Really annoying pixel alignment bug

I use illustrator to mockup websites and UI's. I've been doing this for years. It's a lot faster and more flexible than photoshop. Illustrator's pixel grid is a really cool feature, but it's really buggy, especially this one thing that it does - throws all the graphics off the pixel grid when copied to another file. Let me explain:
I have an AI file with all my user interface elements for my website called "ui.ai". I have another AI file with my home page design called "home.ai".
Everything in ui.ai is made to look pixel perfect (that means it's aligned tothe pixel grid and looks sharp).
I copy some pixel-perfect elements from ui.ai to my other file home.ai.
All the pixels jump and align to the pixel grid in some weird way (it doesnt even align to the grid at all).
Nothing looks pixel-perfect anymore.
I have to select every individual element and realign them manually. = HUGE time waster.
Example image from UI.ai file:
Copied-over images from HOME.ai file:
Does anyone else run into this problem? I run into it all the time! Its a pain in the butt having to "fix" this by going through each element and realigning everything to the file's pixel grid. Has anyone found a work around? That would be SOOO awesome. Oh i would love you forever.
So generally the problem

Here's a preview of what it happens. Instead of the graphics snapping to a pixel grid when copied over to the other ai file (both have different-sized artboards), the anchor points snap to .5 pixels to the left or right of the pixel grid, which of course makes it look blurry because of the antialiasing.
Graphic from UI.AI that's aligned to pixel grid: click here to see higher res image
Graphic copied to HOME.AI that's not aligned to pixel grid: click here to see higher res image
I tried creating a new document (different size artboard than ui.ai and home.ai with Align to Pixel OFF) and pasted this graphic into that document. Result: it looked CRISP! That means it aligned to the pixel grid! That is really odd. I tried to copy it into a new document with Align to Pixel ON and it also aligned to pixel grid correctly. Seems very unpredictable.

Row of bugs with iPod & iTunes

Greetings, I'd very appreciate some advices about iTunes and iPod. First of all, the iTunes.
I've installed the iTunes 6, which I have received as software on the CD within iPod. Fpr some time everything was alright; till I've tried to convert movies. As first movie was converted, I've tried to watch it on iPod - and've heared nothing. There were right scenes on a screen, but complete silence. I ve tried everything i've found in the Internet, nothing helped.
'bout iTunes. I've made 'format c:/' and tried to install new iTunes insted of iTunes 6 . Everything was lagging a bit, but finally, when I tried to connect iPod through new software i saw message telling about damaged iPod . As I tried function to 'correct' it, nothing happened. Afterwards, iPod started to behave as it really would have been damaged somewhere
Finally, I've installed old iTunes 6, because I thought iTunes 7 was corrupted or something . As I tried turning it on, I was said that iTunes Library.itl doesn't suit to my software because it was created by newest version.
Please help me in getting rid of any of these cases. Thanks.
Pentuim 4 Windows XP Kind of wood.

I had a similar problem.
But I was able to sort this by choosing - settings - compilations - and switching this to OFF on my IPOD.
Then all artists should be displayed within the IPOD's artist directory.
Any clues? Some of my entries in iTunes do not match
the entries in iPod. For example… we should be able
to see entries in iTunes and iPod sorted by Album,
Artist, etc. I have some entries in iPod that do not
identify/show the “Artist” even if they exist in the
“Album” category. Another words, the actual song
exists in both iTunes and iPod but it does not
recognized the “Artist” in iPod. Any ideas on how to
fix this? This only happened to a very few songs I
have in my collection.
PowerBook G4 Mac OS X (10.4.5)

Listbox Row Alignment BUG

Similar Messages

Maybe you are looking for