Listing/Exclusion Conditions are not getting downloaded from ECC to CRM

hi,
I have created the customized table for listing/exclusion purpose as per the requirement.
I have created the middleware adapter for that object.(DNL_CUST_G804)
I have down the initial download and when I check the status it is green color when I check the records in CRM Table I did not find it.
When I check in the SLG1 the following error has been occurred
"No Entries Determined for the A Tables (Block 1)"
Message no. CND_MAP312
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Condition records have been maintained in ECC server.

Hi
i have the same problem , how did you solve it ?
regards
Jacopo

Similar Messages

Mails sent from Z10 are not getting downloaded using POP 3

Hi,
I have just upgraded from BB 9360 to Z10, all the mails sent from the Z10 are not getting downloaded on PC, I use POP 3 setting to download messages. Mails deleted from Z10 are getting downloaded
Please let me know how to download mails sent from Z10

Mail sent from the handheld on a POP3 email server is not synced to the server.
You could upgrade to an IMAP account.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mail notifications are not getting sent from a Calendar client

Mail notifications are not getting sent from a Calendar client

On the client, after creating an event and electing to send a mail notification,
the following error appears in a pop up box:
"module:mailmsg.ctp,label 190, service error"
Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
error from the corresponding time that the client receives one:
DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
-> Request 0x443 for NodeId 10002,
status set to CANTSERVICE
Solution:
If this is only happening for one user, then check for the presence of a dbv.log
file in the /users/unison/log directory. If present this implies db corruption
and the /users/unison/bin/unidbfix tool should be run.
Note: For details on "unidbfix", please read the man page and also the online
Calendar Administrators Guide.

I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
so some problem they are having in emeryville today? I too am waiting for it to clear up.

Payment methods download from ECC to CRM

Hi Masters,
Due to some requirement, new Payment methods customised in ECC so have to download from ECC to CRM. How it download through delta download. Existing payment methods data updated with adapter object name # CUST_TSP_WRITE and table name # CRMC_BUAG_PAYM in crm. iam new to crm plz Could anyone tell me step by steps.
its urgent.......... plz........
thanks in advance.
Regards
Sri

Hi Sri,
Payment methods maintained in ECC can be replicated to CRM via CRM download object DNL_CUST_PAYM in transaction R3AS in CRM. This updates the associated CRM table CRMC_BUAG_PAYM and CRMC_BUAG_PAYM_T.
If you wish to create payment methods directly in CRM, then you can do so via customizing in CRM through transaction SPRO >
Customer Relationship Management > Master Data > Business Partner > Business Agreement >Define parameters for Business Agreement > Define Payment Methods.
I hope this helps.
Best Regards
Gavin

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Weights are not getting copied from quote to order

Hi All,
While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in quote has weight.
Why are the weights not getting properly from quote to order .

hi
goto VTAA and select the target document
click on Magnifying glass symbol
here check whether you have selected complete Reference or not
But if you select this then the system copies the source document completely.
Procedure
If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
Regards

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Mails are not getting deleted from server

Hi
I am reading a mail from using java mail from my mail server.
When i am setting the message.setFlag(Flag.DETELED,true);
the mail is not getting deleted from the server.
I am not able to trace the problem, please help me solving this problem. It's a bit urgent.
store = session.getStore("pop3");
store.connect(hName, portNo, uName, pWord);
folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message message[] = folder.getMessages();
System.out.println("Unread Msg Count : " + folder.getUnreadMessageCount());
int n = message.length;
for (int i = 0; i < n; i++) {
fromMsg = (message.getFrom()[0]).toString();
subMsg = (message[i].getSubject()).toString();
if (folder instanceof POP3Folder) {
POP3Folder pf = (POP3Folder) folder;
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart)
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart){
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
message[i].setFlag(Flag.DELETED, true);
store.close();
Thanks and Regards,
Luv Amieee...
xx

yeah true...
i did not close the folder.
i got to know from sun faq only later on yesterday.
but still.. thanks a lot...
luv amieee..
xx

Manual discounts are not getting copied from Quote to Sales order

Hello All,
If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
and both quote & Sales order use the same pricing procedure, i am i missing something here?
I appreciate your help
thanks
Chandu

Hi Chandu,
Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
Please share the outcome.
Regards

CRM Return/Complaint - Manual Condition not getting copied from ECC Invoice

Hi There,
I am creating Return/Complaint Request and referencing ECC Invoice in TRANSACTION DATA > Referenced Documents Tab..
All other condtions are getting copied except the manual fixed price and manual discount. These condtions are present in the referenced ECC Invoice. So while referencing ECC invoice all the condtions should get copied to CRM Return/Complaint Request.
Please suggest.
Thanks and Regards
Dnyanesh

HI
Dyhnayesh are you working this on CRM Service side or trying to do in other IMG?
make sure that Implement it under crm service varanties with RMA
Return Merchundise Authority when customer wants to return the good back
may be faulty one what ever is the reason , this things you have to implement it under IMG>CRM>Service> RMA Waranties
Reward with Points
Venkat

Free Goods Condition table records not getting downloaded from R/3 to CRM

Hi Friends,
I'm trying to download free goods condition records from R/3 to CRM. i have already downloaded condition techique, procedure, condition type, access sequece.
Now i am tryin to download Free goods condition table for Example: KOTN602 to CRM. I created new condition adapter ZDNL_COND_N602 by coping standared adapter DNL_COND_N010 and changed to table table. now i have the following tables in table section.
KONDN
KONDNS
KOTN602
TMC1K
No filter has been set as we have only one record in table KOTN602 in R/3.
i had run initial load of this adapter ZDNL_COND_N602 thr R3AS, then I checked in R3AM, the status is canged to Green. but when I checked in CRM table /1CN/CCFCUS602, no data available in this table ( NO download happens).
Can you please suggest what could be the reason and what is missing?
Thanks
Bharthi

Hello Bharti,
Please make sure in txn R3AC5, for you Z* adapter object, under the tab 'Mapping Modules: R/3 to CRM', you just have
single entry of CND_MAP_MAST_EXCHANGE_MAIN_MBD.
If there are double entries please delete the duplicate.
Also, you can check the logs using txn CND_MAP_LOG_DISPLAY
Object : COND_EXCHANGE
Sub-Object: CONDITIONS
Please give the 'From' and 'To' correctly, to get the correct log messages.
This will give you some hint.
Hope this helps!
Best Regards,
Shanthala Kudva.

My locked posts are not getting deleted from my questions

Hi,
Can someone remove the posts that have been reported as abused from id.Thanks a ton in advance.

I see that you have quite a number of unlocked and yet open threads. You need to go and close those threads manually. Don't you think you are obliged to get back to the people who spent time on your issues to go back and update them of the progress and close those threads?
These are only some of the examples:
Database growth
HTTP sessions struck
Issue with trusted system
List of all spool tables
Issue in ESS
Issues uploading a file
pk

Windows Updates are not getting download after installation of SCCM 2012 SP1

I have installed SCCM 2012 SP1 step by step as per microsoft documents, Now I am getting error while downloading windows updates from microsoft site.
Error by WCM.log : System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport
connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
Error By wsyncmgr: DB Server not detected for SUP XYZ.com from SCF File. skipping.
Sync failed: WSUS update source not found on site KSL. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=KSL-MUM-SCCM01.KSEC.KotakGroup.com SITE=KSL PID=3688 TID=4752 GMTDATE=Tue May 21 10:59:06.745 2013 ISTR0="getSiteUpdateSource" ISTR1="WSUS
update source not found on site KSL. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
I have reinstall my SUP on site server, i have my WSUS & site server is on same server. I have kept my sup setting as per requirment (8530 & 8531)
Kindly suggest is any other settings need to be done on server side.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
From your log snip-it, it looks like the firewall is causing your problem. Temporary turn off the firewall and see if that solves your problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Conditions are not getting calculated based on actual Base Quantity

Hi Frineds,
I have configure a new order type ZRE1 for credit return. While creating this credit return with the reference of actual Billing document, system is picking all conditions as mentained in actual Invoice. But while changing quantity in ZRE1, system is not updating conditions according to new Quantity entered and remaining with values as menioned in actual invoice.
Even after carrring out new pricning, some conditions like discount is not chaning condition base value, although we don't want to update the conditions with carry out new pricing, as it will change all conditions value.
Is there any customisation settings remaining in configuring new Order type. Pls help me to sort out this issue.
Thanks and Regards
Krishan Raheja

Hi Krishan,
Does your doc type ZRE1 have a Pricing Proc indicator assigned to it in VOV8?
And if yes, have you assigned a new PP to the combination of the relevant Sales Area+ Customer Pric Proc+ Doc Pric Proc?
And, what is meant by credit return--you mean returns for partial quantity?
Please check the above points and let us know more to help you...
Regards,
Raghu.

How to delete films which are not fully downloaded from my iPad?

I am trying to delete films from my iPad. I can't see any 'delete' function. The reason could be my movies are being downloaded and it ran out of space. Both the movies are halfway through and got stuck, and wouldn't give the delete option. Any help?

Hi there sureshu,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
-Griff W.

Listing/Exclusion Conditions are not getting downloaded from ECC to CRM

Similar Messages

Maybe you are looking for