ListView and DetailView in same ViewStack
I am trying to load a DetailView from a ListView in the same
ViewStack.
The ListView loads a DataGrid with ObjectID's. I am trying to
get an Event to change the View in the ViewStack to switch to the
DetailView.
I can get the reference to the ViewStack using the parent
keyword. This reference though does not let me do the following;
parent.selectedChild=detailView
'detailView' being the id I gave the DetailView Canvas in the
ViewStack.
If that makes sense I want to ask if anyone can give me a
hand.
Thanks in advance.
If parent is a ViewStack and that's the only ViewStack you
have, then parent.selectedChild = detailView should do it. You
could try casting it and see if that works: (parent as
ViewStack).selectedChild = detailView. If (parent as ViewStack)
yields null, then parent is not a ViewStack.
Otherwise you might want to post some sample code.
Similar Messages
-
To upload a RTF and a PDF file to SAP R/3 and print the same through SAP
Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
rec type string,
end of itab.
data: options like itcpo.
data: filename type string,
count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS 0 WITH HEADER LINE.
DATA: string_len TYPE i,
n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
EXPORTING
filename = filename
filetype = filetype
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
rtfline-line = itab-rec.
APPEND rtfline.
SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE = '0000'
DIRECTION = 'IMPORT'
FORMAT_TYPE = 'RTF'
FORMATWIDTH = 72
HEADER = header
SSHEET = 'WINHELP.DOT'
WITH_TAB = 'X'
WORD_LANGU = SY-LANGU
TABLETYPE = 'ASC'
TAB_SUBSTITUTE = 'X09 '
LF_SUBSTITUTE = ' '
REPLACE_SYMBOLS = 'X'
REPLACE_SAPCHARS = 'X'
MASK_BRACKETS = 'X'
IMPORTING
NEWHEADER = NEWHEADER
WITH_TAB_E =
FORMATWIDTH_E =
TABLES
FOREIGN = RTFLINE
ITF_LINES = ITFLINE.
LINKS_TO_CONVERT =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
HEADER = newheader
OPTIONS = options
IMPORTING
RESULT =
TABLES
LINES = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
AvraHi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules |Export Images through Function Modules;.
Hope it helps you. -
How to send IP Addr in an alert and receive the same?
1. I have an 'alert handler' process that's sending an alert using 'Create Alert' activity.
2. I have a listening/receiving process that get's triggered by this alert from the 'alert handler' process.
3. The listening/receving process telnet's to a router. I want the listening/receiving process to extract the IP Address of the router from the alert that triggered this listening proecess.
4. I tried sending the IP address of the router as 'Parameter 1' using the 'Create Alert' activity in the 'alert handler' process.
5. In the receiving process, in order to telnet to the router, I chose 'Execute on this target reference' option for the 'Open Terminal' acitivity, but was unable to access 'Paramter 1' of the alert. It shows greyed out.
Question:
What is the best way to send the IP address of the router in the alert and receive the same in the listening process such that I can telnet to that router in the listening process?
Please note: tried creating a 'terminal target'...there is no way for me to supply IP address info from outside into terminal target...looks like terminal target only takes a hard coded IP address or host name.
Will appreciate your prompt response please.
thanks,
JamalWe discussed this, but just to post here. To view alert or other tasks parameters via the reference variable fields you have to select the show advanced checkbox.
-
I have always had and used the same Apple ID. I have changed credit card information on my Apple ID account several times though. Does that make a difference when downloading past purchases? I'm very angry at Apple and Itunes because I have been using itunes since 05/2005 and I do not have even close to the amount of songs and albums that I have purchased from itunes. If the credit card info does make a difference even though the account is the same one then itunes needs to make sure to notify users of this because I am not the only one who is wondering this same thing. I have numerous friends who i've talked to about this and they say the same thing, that they too have songs purchased in the past that have disappeared when trying to download past purchased items. It should not make a difference. $12 is $12. Especially since I have ALWAYS used the same account. If itunes does not change their ways, I will not be purchasing songs or anything else for that matter from them ever again. I will go back to buying CDs where I KNOW that it will always be with me and I don't have to deal with this. I will also make sure to find a better more reliable source to download music from and will make sure everyone I know and come in contact with knows what it is and how much better it is than itunes. There should be no experation date on the music I PURCHASE, nor should there be any other little loop holes that allow itunes to rob us of rightfully purchased products. What's the deal itunes??
mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important. -
I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
How to change apple id on iPhone? Wife and I have same apple ID which causes me to get her iMessages instead of her. I also get all her pics on my phone and I don't want them. We need to change her apple ID without causing my ID and cloud to be closed.
Have her create a new ID. Here: https://appleid.apple.com/
Have her log out of iMessage/Facetime/iCloud on her device. Now have her use the new ID she has created.
That should keep the 2 of you separated, except for iTunes purchases. You can share that ID in a family up to 5 devices. -
My iPad won't sink with my computer. I continually receive this message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I have tried this over a number of days and receive the same message. Any suggestions??
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
ITunes: Syncing media content to your iOS devices
http://support.apple.com/kb/ht1351
There are some similar posts on the right side of this page (More Like This). Look at those posts.
Cheers, Tom -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside
Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao. -
How to print Header and footer in same page
Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
RegardsHI
First of all,
Unless otherwise you selected some option like page break after/before - both body and header/footer will print on same page in report, so in pdf as well.
If you have difference on report and PDF that you should look into your setup.
If you want more help, please be particular on your issue
james. wrote:
Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards -
When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe
You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
How do I back up my itunes to an external hard drive and restore from same if necessary
How do I back up my entire itunes to an external hard drive and restore from same if necessary.
ThanksThis is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
I do not use a Windows machine, have a Windows Vista Dell I rarely startup now. But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go. -
I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.
Maybe you are looking for
-
Problem with login in Folio Builder after update to v26
After updating to v26 I can't sign in to Folio Builder. Whan I press «sign in» either in panel or in panel menu, nothing happens. Help please!
-
is there any device (enclosure, housing, hub, adapter, cable, etc) which allows me to take the SSD out of my cylinder Mac Pro and connect it to an other device (MacBook Pro, iMac, ...) over USB, Thunderbolt or what ever? i found a lot of those cases
-
I wrote some notes on TLF markup and published them on the TLF blog. http://blogs.adobe.com/tlf/2009/09/tlf-markup-overview.html It's pretty basic - the goal is to give you the tools to understand the markup. Hope it helps! Richard
-
Hallo, AQ is new to me. Therefor i have a question. I set up a queue table, a queue and everything works fine. Handmade queing and dequeing works too. But how can i automatic dequeue messages, arriving in the queue. Is the a mechanism, perhaps aqdms.
-
Using iWorks 8 or 9 with Mavericks
I have some trouble with Page 5 (Mavericks) and I would like to know if it is possible to run iWorks 8 opr iWorks 9 with Mavericks. All my files have been created with iWorks6 and iWorks8 and now, Page-Numbers-Keynote refuse to open them because they