Little problems at start

I own a zen micro 5gB 3 months, and was satisfied of it, but now it begins to...disapoint me a little...Sometimes it just froze on startup screen, or when the "zen micro" logo was displayed, so the only thing to do was to remove the battery then reboot...Until one day, when this funny message appeared : "Hardware problem" ..... I sent the player back to support, and got another one, 2 weeks ago... But it still freeze sometimes! Not EVERYtimes, but VERY often...When i try a remove battery/reboot, it displays "rebuilding library" and sometimes freeze after completing, and again and again even after removing the battery... It did it several times since i've acquired the player... The only thing to do then is a clean up through recovery mode... Despite that, when it's on, i don't have any problems playing music...
-Is it due to the few left disk space? I splitted the disk: 3GB for the library, 2 for datas, and filled up the library (only mB left)
-The version of the firmware is ..0, i think it's the last one?
I think that's all, please tell me if you need additional informations...
Thanks a lot
PS: Yes admins, i've searched the faqs and other helps, but they always say the same thing: Remove the battery then reboot...Message Edited by AmShagar on 2-02-2005 02:29 AM

I had this problem for weeks despite reloading firmware, formatting player etc the answer to your little problem is to hit pause before turning the player off. If the cd/tracks you were listening to have finished you can just turn your player off.
I had problems of zen logo splitting in half, re-building library problems, fuzz, buzz and squeal noise etc. I have not had these problems since pausing the track before turning the player off.
Cheers
PS. SSR - None of my files are from P2P sites.
Message Edited by fizz on 2-03-2005 :4 PM

Similar Messages

I have an iMac. , mid 2007. Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile. Save a file, close a file, open a file, open a window, it's all random. Somtimes it stalls, sometimes it doesn't. Why?

I have an iMac. , mid 2007. Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile. Save a file, close a file, open a file, open a window, it's all random. Somtimes it stalls, sometimes it doesn't. Sometimes long, sometims short. Why is this happening?

Consider adding more memory. Be sure you have adequate free space on the hard drive - 15 GBs or 10% of the drive's capacity, whichever is greater. Do not run too many applications concurrently. Visit The XLab FAQs and read the FAQ on resolving the SBBOD.
Do some maintenance:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

Permission problems and start up problems

Hi all, went to turn my mac on, and was stuck at the load screen.. then I noticed that load bar that normally happens when firmware is being updated.. but nothing happened. I reset, still same issue.
Put the OS disk in, ran Verify Disk Permissions and this came up...
Group differs on "Library/Documentation/User Guides And Information.localized", should be 80, group is 0.
Group differs on "Library/Documentation/User Guides And Information.localized/.localized", should be 80, group is 0.
Permissions differ on "Library/Documentation/User Guides And Information.localized/.localized", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player", should be -rwxrwxr-x , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/AE2.jpg", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/AE2.jpg", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/S01AUAssist.gif", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/S01AUAssist.gif", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/S01AUMan.gif", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/S01AUMan.gif", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/USB.gif", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/USB.gif", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/gfx/adpt.gif", should be 0, group is 80.
It goes on and on... more of this type of thing.
It suggested I back up as much as I could and reformat my computer!! Lucky I had bootcamp, so I just reinstalled Mac OS over windows.
Is there anything I can do to save my files? It wont allow me to click on Repair Disk Permissions.
When running Verify Disk, it says I need to repair it, so I click on repair disk and I get "disk utility can't repair this disk. Back up as many of your files as possible, reformat the disk and restore your backed-up files!!
Now I do have an external drive, if I copied all my music, photos, docs etc to my external drive, that maybe the only way to recover everything? Or is there another way? Please help.

I have tried from the OS installer disk running the repair disk and I get the same error about not being able to do it, and i need to back everything up and re format the drive.
I'm having problems starting in safe mode. I hold down the shift key, and then then little spinning cog comes up, and below it the bar shows safe mode is starting, but then it disappears and just stays on the spinning thing.
This is where the problems first started, was stuck on that.
Not sure what else to try

Little problem whit gps

Hey
I got a little problem whit my gps.
Yesterday I buy my new nokia e72 + a free navigation.
I also reload my credit to €15.
On the eve I drive whit my car 26km away form home and I also use my gps to know how I have to drive. When I was there I end the navigation and I also call the number to check credit, at that moment I hear that my credit was under €15 so my question is is it normal that I have to pay to use my gps ? Its over €0.80 just to start gps . Is it normal because on ovi gps book stands in big letters ovi gps is totaly FREE . ?
can somebody help me ?
greets

the ovi maps itself is completely free, however, unless you use ovi suite to install the maps you need on your phone, your device has to download all the map data as you drive or walk along, using data, which is not free.
even when you load the maps to your device, you usage of ovi maps will require some data usage to connect to the gps. but it will be GREATLY reduced!

Little problem in Logic Express 9

Hello all,
I'm having a little problem there..
I bought recently an akai LPD8 controller, i set it up in controller assignment and it works fine.
Now, if i quit Logic, and re-open it, the controller assignment still there. great.
If logic crash or quit for some reason, the assignment are deleted, and this is normal.
The problem starts here, i read that the preferneces file of logic : com.apple.logic.cs and .plist should be present in : myHD/library/prefernces/
There i find all my .cs and .plist file, but not the logic one!
The strange fact is that logic actually save my prefernces, like controller assignment, or arrange window color and go on..
I need to know were to find the controller assigments save file for keep a copy in my mac, for when logic crash, and not reassign everything to the controller.
Thanks a lot,
Ales

Hi
ALES.ambient wrote:
Hello all,
The problem starts here, i read that the preferneces file of logic : com.apple.logic.cs and .plist should be present in : myHD/library/prefernces/
There i find all my .cs and .plist file, but not the logic one!
You are looking in the wrong "Library".
Logic preferences are saved in the <User> Library:
My HD:Users:YOU:Library:Preferences
Note that the User Library is hidden by default in Lion and M Lion. One easy way to get there is to use the Finder:Go menu whilst holding down Option (the User Library will appear in the menu).
CCT

Seeing all these little problems, I think I might just return my new MacBook...

I'm a heavy PC user switching over to Mac because of all the hype and positive comments I've heard from others, but seeing all these little problems everyone is having doesn't motivate me to continue.
Few days after I got my MacBook (somewhere else) I took it with me to a Mac Store in the mall. I was excited until I was basically told I wasn't worthy because I got it somewhere else. That made me feel really good. I think I'd rather my PC; I'm just not seeing the real benefits to sinking two grand down on something I could easily get for a fifth of that.
Anyone want to help with my baptism into the world of Mac?

I am being careful not to stub my toes since this is only my sixth day with my newly-entered Mac experience. I like the MacBook so far. I suppose most of my issues are geared towards being a new Mac user, but I am sure functional issues are yet to arise and surprise. I haven't seen many, if any, functional problems yet, probably because I don't know what to look for and Mac is new to me.
I have everything up and running, i.e. emails, internet, etc. I upgraded to Lion (was told I wouldn't have to pay for the upgrade, but I did because I couldn't find the way around the payment button).
I have been through many a PC over the past 15 years and know what I know in terms of programs and their tools, at least the ones I use. Familiar story, perhaps? With Mac it seems I have to relearn everything, as I will explain a little more below. I like having a number pad and both delete and backspace keys. Many of the programs, applications, downloads and software I run on my PC are either not compatible with Mac (and a wheel-less mouse) or they are just not the same in terms of set up and use. For instance, in PC, Firefox allows me to close the program and reopen all my tabs when I come back. Not so in Firefox with Mac, or at least I didn't find that option.
The most improtant factors for my dicision to Mac-Up were primarily
1. The security
2. The speed
3. Creative aid programs
Example- With the PC programs I have used, I was able to simply play and learn. Not so thus far with some of the I-stuff. The tools I know and use everyday with PC programs are there, I just don't know where to look to find them or what they are called.
Example- How do I shutdown a program that doesn't want to shutdown? Searching help to "force shutdown" doesn't produce any solid results.
I went to the store where I purchased my MacBook. While there, another customer was asking about features. I rested my attention over the Mac instructor's shoulder to listen and learn (and a lot I did learn), but I realized that of all the things I was doing with my PC programs, despite having the ability to do the same with Mac programs, they were all called something different and/or used a little bit differently. For example, in MS Pub, its a Transparency tool; in Pages its an alpha tool. Stuff like that. For me, little stuff like that can really eat up a lot of time. It would be different if I was just starting my computer journey, but such is not the case.

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem in starting SQL*PLUS in oracle database 10g

Hi
Well I am facing one problem while starting SQL*PLUS in oracle database 10g
ERROR - "Procedure entry point longjmp could not be located in dynamic link library orauts.dll"
This has happened when I installed Oracle Database 11g on same machine and when I deinstalled Oracle 11g then SQL*PLUS is started...no error came
Can anybody tell me the reason please...

hi
pls im having the same problem but in my own case i installed oracle apex using 11g.
im env variable is:
C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\app\Xty\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\
pls which is my apex_home so i can interchange it?
i also have oracle 10g client installed

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

I am facing problem in starting ShellHWDetection service Error code 1075,please help

I am facing problem in starting ShellHWDetection service Error code 1075,please help

Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
It provides notifications for AutoPlay hardware events.
System error code 1075 means "The dependency service does not exist or has been marked for deletion."
Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
Make sure the three services are set to running "automatic" in Services.
If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
Yolanda Zhu
TechNet Community Support

Problem while starting Weblogic 7.0..please help

Hi,
Im facing this problem while starting the weblogic.
Below is the error i get...
<Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
= Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
at weblogic.Server.main(Server.java:32)
<Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
= Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
[email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
modulus length=65, exponent length=3.>
I have updated my license.bea file also. the date of expiration="2006-12-02" ..
Please suggest as to how to proceed
Thanks and Regards
SmitaUdupa

Your server certificate expired. You need to update your identity keystore with a new certificate.
The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

Problem in Starting a GP Process from Webdynpro Code

Hi Experts
I have a problem in starting a GP Process from webdynpro code. I have imported the following used DCs in my Webdynpro DC
caf/eu/gp/api/wd
caf/eu/gp/api (external)
com.sap.security.api.sda
Once I deploy I get the following error. No Syntax, Build errors in the application.
java.lang.NoClassDefFoundError: com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager
I have used the following code to start the GP Process - getUserDetails Context is of type IUser
          //Starting GP Process
try {
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(
     wdContext.currentContextElement().getUserDetails());
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                    "00A897714C5A11DE8E33005056A260C3", userContext);
IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters());
IGPProcessInstance prInstance = rtm.startProcess(process,
                    "New User Registration Process",
                    "New User Registration Process",
                    wdContext.currentContextElement().getUserDetails(),
                    roles,
                    params,
                    wdContext.currentContextElement().getUserDetails());
} catch (Exception e) {
     e.printStackTrace();
Please do the needful EXPERTS.
FYI... SP17
Thank you
Best Regards
Ramamoorthy D

Hi Ram,
You have to add Library reference to your DC.
in the context menu of your DC select
properties->webdynproReferences->LibraryReference
add sap.com/cafeugp~api as refernce.
I hope this will solve your problem.
Regards,
Rajesh

Little problem with Photoshop ....

Hi. I have a little problem with photoshop CS 4. I use a color replacement tool to change a color in some details... but when i set new color, on pictures entries only or grey or black colors and nothing other... i dont known why.... please help . Thanks. Sorry for bad english

Usually the Color mode is the one you want for the color replacement tool, you
might have it set to luminosity or your trying replace black or white colors.
MTSTUNER

Little problems at start

Similar Messages

Maybe you are looking for