Live-streaming from FMLE to youtube with double bitrate and fps

I am using FMLE to receive in-feed video signal to desktop with installed capture card to live feed to YouTube.
Inside the FMLE, I have configured Encoding Option to be 1500 bitrate and Input Size as 1280x720 and also 30fps in Frame Rate.
However, when I check on the Encoding Log, the statistics show the current Encoding and Publishing is doubled : ~3000 bitrate and 60fps.
How I could adjust to the bitrate and frame rate?

Video via airplay is currently only supported via the iPod and Youtube app. Apple doesn't read posts on this forum.
Even when apple releases the tools for developers it will be up to each individual in terms of airplay support.

Similar Messages

Could you play a live stream from safari to apple tv without going through itunes?

could you play a live stream from safari to apple tv without going through itunes?

There is no way to stream Safari content, with or without iTunes, to your AppleTV.
The only way would be to use a mirroring feature given that you have an AppleTV 2nd gen or newer and a 2011 or newer MBP running mountain lion.
If not, some third party software like AirParrot can also gives you way to mirror your MBP display on the TV.

Live Streaming from Video File

Hi everyone,,, im newbie in programming streaming video with flash....ater reading documentations i tried the instructions on doc, i got a question that i've not been solved. How to make a "live streaming" from "video file". It likes a live streaming from camera but it uses video file as the source.... many thanks

Do you mean you have video file but you want to publish it as live stream , am i right? If yes following is the solution, but before that let me clarify you will need server to do it , i mean there is no way Flash client (i.e. .swf file running in Flash Player) can publish file from local disk.
Now let me tell you how to do it from server:
Place your video file under "streams" folder of your application i.e. say "myVideo.flv" under <FMS root>/applications/myApp/streams/_definst_
Now write following code in your main.asc file (this file would be under <FMS root>/applications/myApp )
var mystream;
application.onAppStart = function(){
mystream = Stream.get("livestream");
mystream.play("myVideo",0,-1,true);
This will publish "myVideo" file as live stream under name of "livestream". Client would have to subscriber using NetStream and
use ns.play("livestream",-1,-1)
You might have to write some extra code if you want to loop same file else once play of recorded file gets over , live publish will automatically stop.
let me know if this solves your problem

Problem playing remote live stream from FMS

Hello all,
I'm having problems playing remote live streams from FMS (server-side) that I can play with any other player (client-side)
Example of server-side application which plays a remote live stream:
nc = new NetConnection();
nc.connect("rtmp://remoteserver/live");
stream = Stream.get("localStream");
stream.play("remoteStream.flv", -1, -1, true, nc);
This code works only sometimes.
Most of the times, FMS is able to connect to remote string and the localStream dispatches events:
   NetStream.Publish.Strart
   NetStream.Play.Reset
In this case, FMS is publishing the local stream but it is not playing the remoteStrem on it.
The rest of the times, localStream dispatches events:
   NetStream.Publish.Strart
   NetStream.Play.Reset
   NetStream.Play.Start
   NetStream.Data.Start
In this case FMS plays the remoteStream correctly.
Any hint to solve this issue?
Regards.

Thanks, I tried your code and it works when playing a remote live stream on another FMS.
But the remote live stream is not on a FMS but on a Wowza Server which re-streams an RTSP stream over RTMP.
With this code:
var nc;
var myStream;
application.onAppStart = function(){
     nc = new NetConnection();
     myStream = Stream.get("localstream");
     myStream.onStatus= function(info){
           trace(info.code);
     nc.onStatus = function(info){
           trace (info.code);
           if(info.code == "NetConnection.Connect.Success" ){
                myStream.play("remoteLive.sdp", -1, -1, true, nc);
     nc.connect("rtmp://remoteServer/live");
Every live stream player I tried was able to play the remote stream "remoteLive.sdp", but FMS play it only sometimes. This is the output log of the FMS application:
NetConnection.Connect.Success
NetStream.Publish.Start
NetStream.Play.Reset        <--------------------------------- Stuck there, stream won't play
Unloaded application instance wowza4/_definst_ <--- Reload app
NetConnection.Connect.Success
NetStream.Publish.Start
NetStream.Play.Reset        <--------------------------------- Stuck there, stream won't play
Unloaded application instance wowza4/_definst_ <--- Reload app
NetConnection.Connect.Success
NetStream.Publish.Start
NetStream.Play.Reset
NetStream.Play.Start       <--------------------------------- Stream is playing just fine
NetStream.Data.Start
Unloaded application instance wowza4/_definst_ <--- Reload app
NetConnection.Connect.Success
NetStream.Publish.Start
NetStream.Play.Reset       <--------------------------------- Stuck there, stream won't play
Any idea? Why FMS won't play it everytime?
Regards

How can I save to computer a live streaming from Ustream

Hi
That's the question.
I want to save a live streaming from Ustream.
any help?
tnx.

Install Livestramer (with all python dependencies)
https://wiki.archlinux.org/index.php/Livestreamer
livestreamer -p vlc https://www.ustream.tv/embed/9979779
Found matching plugin ustreamtv for URL https://www.ustream.tv/embed/9979779
Available streams: 240p, 240p_alt_akamai, 360p, 360p_alt_akamai, 480p, 480p_alt_akamai, 720p+ (best), 720p+_alt_akamai, mobile_240p (worst), mobile_360p, mobile_480p
livestreamer -p vlc https://www.ustream.tv/embed/9979779 720p+
same with mpv-Player

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So we don't want to share contacts or anything else, just photos... Thanks in advance

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So, we don't want to share contacts or anything else, just photos... Thanks in advance

If you turned off Contacts wouldnt that mean that the Contacts would no longer be backed up to iCloud as well? That would make it a pain when upgrading a phone to not easily pull contacts back down.

TS3989 Why will some pictures not stream from iphone4s to ipad2,pictures taken before and pictures taken after have ,but some won't

Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions

    1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    2.    Photostream only syncs when the camera app is closed, ensure it is closed.
    3.    Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

HT1725 What if I download music from my friends computer with his account and there's a song that shows up in my music library but I can't play it because it didn't finish downloading. What can I do to finish downloading it ?

What if I download music from my friends computer with his account and there's a song that shows up in my music library but I can't play it because it didn't finish downloading. What can I do to finish downloading it ?

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

I am trying to free up some room on my touch and am unable to delete any songs or books from the listing. With iTumes open and my touch listed I open the touch. I then select the items I want to delete from the touch and press the delete button.

I am trying to free up some room on my touch and am unable to delete any songs or books from the listing. With iTumes open and my touch listed I open the touch. I then select the items I want to delete from the touch and press the delete button. Nothing happens. I have also tried to right click on the item, but a delete option is not listed. What do I need to do to get rid of some books?

Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync

How can i to convert a file to .m4a format with constant bitrate and constant overall bitrate?

how can i to convert a file to .m4a format with constant bitrate and constant overall bitrate?

"Surely you have the same check boxes as me? Surely you can make the same selections, AAC Encode, Custom bit rate, 256k or 320k or whatever you want... Sample rate 44.1KHz, Auto Channels and VBR not selected?"
Yes.
" Have you tested this? "
Yes. I tested resulted files with "MediaInfo".
"If so what are the results?"
VBR.

Possible to stream from FMLE to another (desktop)computer?

This is some kind of a challenge: I'm trying to find a
sollution for streaming a video signal from one computer
(preferably with FMLE) and pick up the video stream on another
computer and show the video fullscreen.
So far it seem to me that FMLE is only able to deliver the
video stream to a Flash Media Server. Is this correct?
I'm hoping it is possible to stream the video from FMLE and
"pick up" that single stream from another computer with maybe a
program like VLC (or another application? - I just read that VLC
supports RTMP streams), and show the video fullscreen.
In theory, maybe I can use Flash Media Server for this, if it
is able to show the video it's picking up fullscreen.
Any suggestions or thoughts would be apreciated!
regards

carlnes
Windows Media Encoder and Player as a combination can do this "direct pull" from an encoder to a player without a server in the middle. But in all the years of commercial live streaming I have done in 10 years, Flash Media Encoder can not be operated in the same way. A Flash Server has to be in the middle.

Live streaming from tsn.ca iphone app to Apple TV

With my iphone4 (iOS4.2) I can stream youtube videos to my 2nd gen Apple tv. But, when I use the tsn.ca iphone app to watch live streaming hockey games, I can't get the video to show up on the Apple tv. The apple tv seems to sync and displays an image with the label something like "unknown artist" and "unknown title", but no video.
Not sure if this info will help, but it appears that the tsn.ca app is launching Safari and that the quicktime signal is being displayed via Safari on my iphone.
My ultimate goal is to watch a live streaming hockey game being delivered by the tsn.ca website. I would have prefered if the Apple TV would have let me display that live feed directly, but the darn box is so locked down that all I can choose from are the tsn.ca pre-recorded podcasts.
Apple, if you are listening, please allow us customers to watch streaming video content of our choosing via the Apple TV's we bought. I'd love to be able to type in a URL to a quicktime stream and just enjoy. (If this is already possible, I'd love to know how...)

Video via airplay is currently only supported via the iPod and Youtube app. Apple doesn't read posts on this forum.
Even when apple releases the tools for developers it will be up to each individual in terms of airplay support.

How can I see My Photo Stream from two Macs associated with the same Apple ID?

I have a MacBook Pro (my personal machine) and an iMac (our family computer).
The iPhoto library housing all of our family photos lives on the iMac.
The iPhoto library on my MacBook Pro is currently empty.
I have an account on both machines. I have associated the same Apple ID with both machines.
When I launch iPhoto on my MacBook Pro and attempt to turn on photo sharing (so that I can see My Photo Stream, as well as other shared streams), iPhoto informs me that "iCloud Photos for xxx@xxx is being used with another library named 'iPhoto Library'."
My iPhone, which is also affiliated with the same Apple ID, shows the streams just fine.
What can I do to remedy this situation? I'd like to be able to view my shared streams on my MacBook Pro, while leaving the actual massive photo library on the iMac.

I found out about this issue when I created a new library with some photo's I wanted to sync to my iCloud account. I found the following on the Fat Cat Software page and thought it might be helpful to others:
Using Photo Stream with multiple libraries
Starting in iPhoto 9.2, Apple introduced a new feature called Photo Stream, which lets you automatically transfer photos via their iCloud service between your iPhoto library and your other devices such as an iPhone, iPad, or another Mac. This feature works when you have multiple iPhoto libraries set up, but there are a couple things to be aware of.
First, iPhoto will only allow Photo Stream to be active in one iPhoto library at any given time. If you've already enabled Photo Stream in one library, but then open a second library and enable Photo Stream there, this will cause Photo Stream to be turned off in the first library.
Any photos downloaded by Photo Stream are actually stored in an entirely separate location from any of your iPhoto libraries. This means that, even if you do switch Photo Stream from one library to another, you will not need to go through redownloading all the photos you already have in Photo Stream back from the iCloud servers. So, switching Photo Stream from one library to another is a relatively inexpensive operation, so you can do it as often as needed without it being much of a hassle.

Running a live stream from an XML playlist

I have just successfully installed Adobe FMS on my server.
I would now like to know how to program a script to run a continuous live stream, of MP4 videos, from an XML playlist.
Can anyone tell me how to do this? ...or provide me a good tutorial? (I am a complete newbie to ActionScript.)
Thanks in advance...

application.allowDebug = true;
application.onAppStart = function(){
this.userID =0;
this.playObj = new Object();
this.timObj = new Object();
this.passCli = new Object();
this.couObj = new Object();
this.couObj.count = 1;
application.so0 = SharedObject.get("so",false);
this.dates = new Object;
this.dates.dat0 = new Date().valueOf()+"a";
this.dates.dat1 = new Date().valueOf()+"b";
this.dates.dat2 = new Date().valueOf()+"c";
this.dates.dat3 = new Date().valueOf()+"d";
this.myStream = new Object;
this.myStream.st = Stream.get (this.dates.dat0.toString());
this.myStream.st1 = Stream.get (this.dates.dat1.toString());
this.myStream.st2 = Stream.get (this.dates.dat2.toString());
this.myStream.st3 = Stream.get (this.dates.dat3.toString());
this.int0
this.int1
this.int2
this.int3
this.int4
this.lock0=0;
this.lock1=0;
this.lock2=0;
this.lock3=0;
this.lock4=0;
listen();
function listen(){
clearInterval(application.int3);
application.int0 = setInterval(time,1000,application.myStream.st);
application.myStream.st.onStatus = function(info){
if(info.code == "NetStream.Play.Stop"&&application.lock0==0){
trace("code0"+info.code);
clearInterval(application.int0);
application.timObj.tim = 0;
application.int1 = setInterval(time,1000,application.myStream.st1);
application.couObj.count = 2;
playcurr(application.passCli.cli);
switchStream(application.so0);
listen1(application.myStream.st1);
application.lock0=1;
function listen1(mystreamst1){
mystreamst1.onStatus = function(info){
if(info.code == "NetStream.Play.Stop"&&application.lock1==0){
trace("code1"+info.code);
mystreamst1 = null;
clearInterval(application.int1);
application.timObj.tim = 0;
application.int2 = setInterval(time,1000,application.myStream.st2);
application.couObj.count = 3;
playcurr(application.passCli.cli);
switchStream(application.so0);
listen2(application.myStream.st2);
application.lock1=1
function listen2 (mystream2){
mystream2.onStatus = function(info){
trace("code2"+info.code);
if(info.code == "NetStream.Play.Stop"&&application.lock2==0){
clearInterval(application.int2);
application.mystream2 = null;
application.timObj.tim = 0;
//application.int3 = setInterval(time,1000,application.myStream.st3);
application.couObj.count = 4;
playcurr(application.passCli.cli);
switchStream(application.so0);
     application.lock2=1;
listen3(application.myStream.st3);
function listen3(mystream3){
mystream3.onStatus = function(info){
trace("code3"+info.code);
if(info.code == "NetStream.Play.Stop"&&application.lock3==0){
trace("yes yes yes yes yes yes");
clearInterval(application.int3);
application.couObj.count = 1;
mystream3 = null;
application.timObj.tim = 0;
//application.int4 = setInterval(time,1000,application.myStream.st);
playcurr(application.passCli.cli);
switchStream(application.so0);
application.lock0=0;
application.lock1=0;
application.lock2=0;
application.lock3=0;
application.dates.dat0 = new Date().valueOf()+"e";
application.dates.dat1 = new Date().valueOf()+"f";
application.dates.dat2 = new Date().valueOf()+"g";
application.dates.dat3 = new Date().valueOf()+"h";
application.myStream.st = Stream.get (application.dates.dat0.toString());
application.myStream.st1 = Stream.get (application.dates.dat1.toString());
application.myStream.st2 = Stream.get (application.dates.dat2.toString());
application.myStream.st3 = Stream.get (application.dates.dat3.toString());
application.myStream.st.play(application.playObj.vid[0],0,-1,0);
application.myStream.st1.play(application.playObj.vid[1],0,-1,0);
application.myStream.st2.play(application.playObj.vid[2],0,-1,0);
application.myStream.st3.play(application.playObj.vid[3],0,-1,0);
listen();
///here next
application.onConnect = function(client){
application.acceptConnection(client);
application.passCli.cli = client;
client.call("setUserID",null,this.userID);
this.userID++;
if(application.clients.length == 1 ){
videoArray = new Array();
var playlist = new XML();
playlist.ignoreWhite = true;
//parse xml play list for individual elements
playlist.onLoad = function( success ) {
if(playlist.loaded == true) {
if (playlist.firstChild.hasChildNodes()) {
for (var aNode = playlist.firstChild.firstChild; aNode != null; aNode=aNode.nextSibling) {
if (aNode.nodeType == 1) {
//create array from parsed xml elements.
videoArray[aNode.attributes.id] = aNode.attributes.name ;
//pass array out of onload function
application.playObj.vid = videoArray;
application.myStream.st.play(application.playObj.vid[0],0,-1,0);
application.myStream.st1.play(application.playObj.vid[1],0,-1,0);
application.myStream.st2.play(application.playObj.vid[2],0,-1,0);
application.myStream.st3.play(application.playObj.vid[3],0,-1,0);
pass0(videoArray);
//play first video on playlist
playlist.load("http://www.privatechatnow.com/fmsuser/playlist.xml");
}//end onetime if statement
function pass0(videoArray){
//receive array
//play intial video
if(application.clients.length == 1){
// application.playObj.vid=videoArray;
playcurr(application.passCli.cli);
for (var key in application.playObj){
trace(key + ": " + application.playObj[key]);
   //put currently playing videio into object
//isolate playlist switching loop for each connected client
//listen to currently playing stream with onStatus
//change to next video in playlist
//use onStatus and current duration and seek to scrub to cuurently playin video each time a user connects.
//continue untill playlist is played then loop back to first video in playlist.
    //onConnect play currently playing video
if (application.clients.length >1){
playcurr(application.passCli.cli);
//message client with currently play flv
//message client when flv changes
//message client with metadata
application.onPublish = function(clientObject, streamObject){
trace("Stream name :: "+streamObject.name);
function switchStream(so0){
if(application.couObj.count == 1){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[0].length;
    nextlen = application.playObj.vid[1].length;
so0.send("playSecond",application.playObj.vid[0],clength,currlen,nextlen);
if(application.couObj.count == 2){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[1].length;
nextlen = application.playObj.vid[2].length;
    so0.send("playSecond",application.playObj.vid[1],clength,currlen,nextlen);
if(application.couObj.count == 3){
clength = application.timObj.tim-3;
currlen = application.playObj.vid[2].length;
nextlen = application.playObj.vid[3].length;
    so0.send("playSecond",application.playObj.vid[2],clength,currlen,nextlen);
if(application.couObj.count == 4){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[3].length;
nextlen = application.playObj.vid[0].length;
    so0.send("playSecond",application.playObj.vid[3],clength,currlen,nextlen);
function playcurr(client){
trace("count = "+application.couObj.count.toString());
if(application.couObj.count ==1){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[0].length;
nextlen = application.playObj.vid[1].length;
    client.call("playZero",null,application.playObj.vid[0],clength,currlen,nextlen);
if(application.couObj.count ==2){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[1].length;
nextlen = application.playObj.vid[2].length;
    client.call("playZero",null,application.playObj.vid[1],clength,currlen,nextlen);
if(application.couObj.count ==3){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[2].length;
nextlen = application.playObj.vid[3].length;
    client.call("playZero",null,application.playObj.vid[2],clength,currlen,nextlen);
if(application.couObj.count ==4){
    clength = application.timObj.tim-3;
currlen = application.playObj.vid[3].length;
nextlen = application.playObj.vid[0].length;
    client.call("playZero",null,application.playObj.vid[3],clength,currlen,nextlen);
application.onDisconnect = function(oldclient){
if(application.clients.length ==0){
this.userID--;
function time(myStream){
application.timObj.tim = myStream.time;

About Flash P2P live streaming from non-webcam sources

Hello, I am a university student. Our lab is attempting to work on a p2p live streaming using flash p2p features. The media source is not from a webcam but a file from a certain server, which is not directly supported by any of the 4 methods flash player offers(posting, direct routing , object replication,and multicast.) As some of the forum threads mentioned, our method is to use NetStream.publish() a stream and use send("callbackname", data) to all subscribers that have joined in a NetGroup. So we can use p2p transmission. Now here are our questions:
1. We know from MAX 2009 that flash p2p camera video multicasting implements pull-push mechanism inside which makes full use of p2p features like buffer map exchange. If we use NetStream.send() API to send non-webcam source data, will it also make use of this pull-push mechanism to spread data among all peers(subscribers) with proper data exchange?
or more detailedly,
I saw the P2P Gaming Libs at flashrealtime.com. It uses DIRECT_CONNECTIONS when creating publish-used NetStream in order to send data with lowest latency. My question is if I do not use DIRECT_CONNECTIONS, than when the NetGroup grow large (1000), will those peers that are not direct neighbors to the publisher in the same group relay data to each other using pull-push via buffer map?
2. I have written a sample app and use send() to deliver data only (NetStream.bufferTime = 0) without camera video and audio. When the publisher sends the data in a "for()" stantence for 20 times, the subscribers can only receive about 8 of them. But when I set a timer and periodically send them(e.g., 500ms), the subscribers can receive them correctly. My questions are: Is the packet loss caused by UDP unreliability? Can this be solved by setting the NetStream.dataReliable = ture? Can this totally be solved by setting a timer? How to set the delaytime property in timer? Are all data sent are orderedly received?
I'm very appreciated if you can answer my questions? thanks.

1. NetStream.send() data is delivered in the order it was sent, whether in client-server, DIRECT_CONNECTIONS, or multicast mode.
2. the lowest latency will be achieved with DIRECT_CONNECTIONS. however, that isn't scalable to large numbers of recipients. the P2P multicast system trades low latency for scalability.
3. there are no plans to support a natural NetStream streaming source that's not a camera/microphone. Flash Media Server can perform that function.
4. you should never need to implement "bitmap exchange"; the object replication system handles all the communication needed to accomplish its function. typically you will divide a file into segments, giving each one an index number. object replication uses ranges internally, so the index numbers should be contiguous. nodes that have indices use NetGroup.addHaveObjects(). nodes that want indices they don't have use NetGroup.addWantObjects(). nodes that have objects will send them to nodes that want the objects. when a node receives an object, it's automatically removed from its "want" set; once the node decides the object is acceptable, it adds it to its "have" set, at which point it can answer requests from other nodes who still "want" it. eventually every node will have all the pieces and not want any. for an example, please see Tom Krcha's articles on using object replication:
http://www.flashrealtime.com/file-share-object-replication-flash-p2p/
http://www.flashrealtime.com/video-on-demand-over-p2p-in-flash-player-101-with-object-repl ication/
5. please see Tom Krcha's articles. for VOD you will probably want to use the "LOWEST_FIRST" replication strategy, as that may allow you to start playing earlier. for general file replication you'll get better sharing if you use RAREST_FIRST.

Live-streaming from FMLE to youtube with double bitrate and fps

Similar Messages

Maybe you are looking for