Live Type textures and Objects not working

Everything had been working. Moved to a new home...so I had to take editing suite apart. Now when I open LiveType there seems to be a red render bar...and when i try to apply textures and objects to a new track...you see it in the canvas as a small black line. And you get nothing if you try to render the movie. though the font seems to be working
please help

Look in this discussion: http://discussions.apple.com/thread.jspa?threadID=1392289&tstart=0
To nutshell it, use an app called "Pacifist" to revert your ProApps to 4.0 from 4.5 and Quicktime from 7.4 back to 7.3. You can find links to all that in the other discussion. I found my liveType dead this morning and the culprit appears to be the combination of the ProApp update and the Quicktime update. I used Pacifist to revert and it was simple and fairly painless. Install Pacifist, drop the "old" update's .pkg onto the Pacifist icon in your Application folder and rock on.

Similar Messages

  • Live Type Textures and Background

    Does anyone know why when I import my live type titles, the background or textures do not transfer over into Final Cut Express? The fonts and the effects work, but the background does not transfer?
    Thanks for your help!

    As Da Nam has pointed out you just need to check a little box next to "Render Background"
    If you are Rendering a Movie then when doing so a little dialogue plate comes up and you can check the box next to "Render Background"
    If you are using the Live Type project directly then the box is in your Project Properties. In this case while you are in Live Type hit cmd-zero, and when the Project Properties plate comes up check the box next to Render Background.

  • Mac mail - can't type message and reply not working.

    mac mail working fine until today. Tried to set up a new message. Added address okay, put in subject okay but when I came to type text into main panel I get about three letters typed and the curser vanishes and I get an alert sound. And that's the way it stays.
    Tried reboots and all the usual tricks.
    Also trying to reply to an email does not work
    Everything else appears alright. Incoming mail is okay.
    Can anybody help me out here? Desparately need to be back online.

    This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you wish.
    5. Click the Execute button.
    6. Restart the computer.

  • Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. Please help

    Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. I came across forums where this issue is mentioned on apple support and cnet.
    Is there another option apart from upgrading ?

    Well, in his defense, his parents bought him the player so I guess we can't blame him. Though the 6 GB versions were available in November so I guess they really did get 'nervous' about Christmas and like to get their shopping done early! Kudo's to you for trying to remain with the Creative line but for what you're looking for it's obviously not the player for you. Creative seems to be fine-tuning their line for the audio crowd. I'm into mp3 players for the audio. Sure, the ability to watch video's and look at pictures on a decent screen is a plus but for me at least, it's all about the music. And with music, 6 GB is more than enough. Heck, 8 GB would have been more than enough for me. I'm a subscriber to Napster-to-go, so I don't feel the need to carry 00 plus GB of stuff on my portable player. I honestly don't understand the desire to watch movies or TV shows on tiny little screens. But you're also talking to a guy who doesn't watch television. What a complete waste of time and brain cells. Probably the **competitor products we can't discuss here** or one of those players would better suit your needs. Companies are definately picking their niche markets carefully and Creative's decision to not offer hard dri've players any more seems to definately be saying bye-bye to that market. I can't say I blame them. Hard dri'ves eventually give up the ghost and are quite delicate for people on the go. Good ridance, I say. Let Apple, Zune and all the others cater to the Z generation's need to be spoonfed their video/TV addictions anywhere and everywhere. I'll pass. It's one thing to be able to enjoy some music on the go and enhance an otherwise dull work day or dri've. But movies/TV shows at work, school, or wherever? Please. Cut the cord! Just my $.02 - YMMV! M.Message Edited by Dale-CL on 2-26-2007 :4 AM

  • My LiveType have no textures and objects! Please help me! Thank you!

    Sorry to trouble, thank you for taking your time to reply me =)
    I just bought my Mac OS X 10.5.4 Leopard not long ago. And today is my first time using LiveType on my laptop. I've learn how to use LiveType in school before, but i just found out that my LiveType have no textures and objects. Can anyone tell me how to get it and get it more ? Where to get it for free ?
    Thank you

    If you have Final Cut Studio, there are two extra disks labelled "Live Type Media".
    If you have Final Cut Express, Look on your Installer disk, the media files should be on there.

  • SaveState and restoreState not working properly :/

    Here is my code:
    public class UIChooser extends UIComponentBase implements StateHolder
    private String submitedCategoryItemID;
    private boolean transientFlag;
    public UIChooser()
        super();
        transientFlag=false;
      public boolean isTransient()
        return transientFlag;
      public Object saveState(FacesContext context)
       System.out.println("saveState");
        Object[] values = new Object[2];
        values[0] = super.saveState(context);
        values[1] = submitedCategoryItemID;
        return values;
      public void restoreState(FacesContext context, Object state)
        System.out.println("restoreState");
        Object[] values = (Object[])state;
        super.restoreState(context, values[0]);
        this.submitedCategoryItemID = (String)values[1];
    }saveState and restoreState not working.
    Phrases "restoreState" and "saveState" aren't displayed and value of submitedCategoryItemID not restored. :/ What's happend?

    yes you can,
    in your source add a master_name column and in that make the navigation.
    in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
    display: none
    now in your source the master_id column will get hidden. in your target make the master_id prompted.
    now click on the master_name in your source, your target will get filtered by the corresponding msater_id
    thanks,
    Karthick
    Edited by: kart on Jun 7, 2010 11:52 AM

  • "Document type" in access sequence  not working in free goods

    Dear All,
    our requirement is to provide free goods with the main items in portal.
    for this i defined access sequence 1.Customer/Material and 2. SalesOrg/Documnet Type/Material.
    for access sequence Customer/Material  it's working fine but when i use SalesOrg/Documnet Type/Material it's not working.
    problem is that when i use Document type in access sequence it's not working.
    pls help.
    Radhashyam Sahoo

    Hi Apoorva!
    What do you mean with "Access Sequence"?
    In CRM 7.0 EHP1 there is a generic framework-feature available which allows the defininition of the tab-order.
    Best regards
    Arno

  • I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

    I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • HT1316 I bought an iphone from Canada, then I tried to use it in Turkey where I live currently, but it did not work at all. They told me it is locked phone. How to unlock my phone? Thanks.

    I bought an iphone from Canada, then I tried to use it in Turkey where I live currently, but it did not work at all. They told me it is locked phone. How to unlock my phone? Thanks.

    Contact the cellular provider in Canada to determine if they offer unlocking and if you qualify.

  • Type Messages and Objects turned from white to black in PDF

    When I exported my Keynote presentation to a PDF the Type Messages and Objects turned from white to black. The display in ”Preview” is ok but in Acrobat PDF Viewer it looks black instead of white. Only happens on some slides. I could not find a reason why this happened. Seemed kind of random to me when it happened. But the error was reproducable unless I rebuild it with new silides.

    Can you get the exact wording for that error? Is it can't mount iPod?
    Also, make sure iTunes is up to date...
    iTunes
    Finally, make sure your iPod's battery is charged up.
    btabz

  • IPS event monitor and reports not working

    Dear after upgrading my IPS from E3 to E4  the event monitor  and reports not working, can you please advice my to solve this issues

    Hi All,
    Filter settings below:
    The filter works partially as I don't get alerts on the IPS itself.
    Firewall LOG:
    4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
    IPS LOG (when enabled):
    evIdsAlert: eventId=1352793300955167909  vendor=Cisco  severity=low 
      originator:  
        hostId: SSM02 
        appName: sensorApp 
        appInstanceId: 1192 
      time: Feb 14, 2014 15:33:22 UTC  offset=0  timeZone=GMT00:00 
      signature:   description=IP Fragment Too Small  id=1206  version=S212  type=anomaly  created=20030801 
        subsigId: 0 
        sigDetails: Too many small IP fragments in datagram 
      interfaceGroup: vs0 
      vlan: 0 
      participants:  
        attacker:  
          addr: 172.x.x.x  locality=OUT 
          port: 39715 
        target:  
          addr: x.x.x.x  locality=OUT 
          port: 514 
          os:   idSource=unknown  type=unknown  relevance=relevant 
      alertDetails: InterfaceAttributes:  context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ; 
      riskRatingValue: 50  targetValueRating=medium  attackRelevanceRating=relevant 
      threatRatingValue: 50 
      interface: GigabitEthernet0/1  context=single_vf  physical=Unknown  backplane=GigabitEthernet0/1 
      protocol: udp 
    Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
    Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
    Regards
    Mariusz

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • Pages numbers and keynotes not working on handoff, but everything else is?

    Pages numbers and keynotes not working on handoff, but everything else is, map, mail etc. Am I alone?

    Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted  below)  with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point -  having the use of the guest network. So my question is even if I did update firmware,  seems I would still require 3rd party software to make this work? (re your last sentence in your comments below)  Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as  simply an access point with  guest network functionality,  Thanks much appreciated.
    "Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
    This is and was always possible using a LAN-LAN setup instead.
    The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
    These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
    But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware."

  • Textures and Objects

    How do i install Lvt 2 textures and objects, i dont have any preview of them in the media browser. Can i install it from the LiveType Data 2 of LVT 1 ?

    Not sure? I installe FC Express 3.5. Do I need to install them separate? To be honest I forgot I had Livetype till I saw some video on u-tube,and I really like what I see. I have already used a tiltle in I Movie,but the textures and objects would make it better. Thx for your reply

Maybe you are looking for